mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 10:32:35 +00:00
980f3c344f
- A new API that allows setting more than one GPIO at the time. This is implemented for the new descriptor-based API only and makes it possible to e.g. toggle a clock and data line at the same time, if the hardware can do this with a single register write. Both consumers and drivers need new calls, and the core will fall back to driving individual lines where needed. Implemented for the MPC8xxx driver initially. - Patched the mdio-mux-gpio and the serial mctrl driver that drives modems to use the new multiple-setting API to set several signals simultaneously. - Get rid of the global GPIO descriptor array, and instead allocate descriptors dynamically for each GPIO on a certain GPIO chip. This moves us closer to getting rid of the limitation of using the global, static GPIO numberspace. - New driver and device tree bindings for 74xx ICs. - New driver and device tree bindings for the VF610 Vybrid. - Support the RCAR r8a7793 and r8a7794. - Guidelines for GPIO device tree bindings trying to get things a bit more strict with the advent of combined device properties. - Suspend/resume support for the MVEBU driver. - A slew of minor fixes and improvements. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUjgQ7AAoJEEEQszewGV1zuJ8P+wamlDNhJbsgqXPcSCZZFgeP 1O22VRYqoo/i8mAzNCRi2h6NogO9Da6rCRhHdH35TsuNzIbusHE+btMukj248qJ7 WYOf25I0ImyUP8kulogW4/+7lYibRLHnN2BSLuAkApofmxDvODPS1KNWHulcOcxl VaVsA8wvFzQO1s1Wjv94ctVfs5rqk7mBfPwk61zHuLeETecmKg0e52p0Uzqlq6gi UKi9uK3sjQ7kI/+xa+qDrF9GRwRR22oJfD/9zNj8g94iU9iMs5Oh+Zp3RJcvYUSD y5BIb+IY2ATy20ZkijWmeP8LJz6pja+C9Ne7lKM0jkv7geGeHGAoavz0n3oUq4oz IvUNz6hCAP9PcxWc5a9FFqqORLWrRew6GmZmJvIkmC9K+3UQcWhkzO3vLpfl6Q9h S728XexkIlhxG9NcER21bFXV2dw3z/X9dm5mQ473TqJm+wQmRuYcPRg053NbqMcx juvkweCksx8qlpnjo/1QXQcVwFM8kuR7xAlVo7zdMDOU5F8pdxRnsTl0cUdx5cPv DKeMRg8+FYcHmIoe/EodemIh7cAZtEpijZNNAr9cDmAjifeBjWhCb+zri5SIc96x 0jKVTXyY4jnHXBVoA0FIl1d2t54yVjh3PYiu0MjeLJ9tyB+Px/nOxW8FrdlFnPJ/ oP5WK13c8h3bMkxUzsvL =ZAhA -----END PGP SIGNATURE----- Merge tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull take two of the GPIO updates: "Same stuff as last time, now with a fixup patch for the previous compile error plus I ran a few extra rounds of compile-testing. This is the bulk of GPIO changes for the v3.19 series: - A new API that allows setting more than one GPIO at the time. This is implemented for the new descriptor-based API only and makes it possible to e.g. toggle a clock and data line at the same time, if the hardware can do this with a single register write. Both consumers and drivers need new calls, and the core will fall back to driving individual lines where needed. Implemented for the MPC8xxx driver initially - Patched the mdio-mux-gpio and the serial mctrl driver that drives modems to use the new multiple-setting API to set several signals simultaneously - Get rid of the global GPIO descriptor array, and instead allocate descriptors dynamically for each GPIO on a certain GPIO chip. This moves us closer to getting rid of the limitation of using the global, static GPIO numberspace - New driver and device tree bindings for 74xx ICs - New driver and device tree bindings for the VF610 Vybrid - Support the RCAR r8a7793 and r8a7794 - Guidelines for GPIO device tree bindings trying to get things a bit more strict with the advent of combined device properties - Suspend/resume support for the MVEBU driver - A slew of minor fixes and improvements" * tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (33 commits) gpio: mcp23s08: fix up compilation error gpio: pl061: document gpio-ranges property for bindings file gpio: pl061: hook request if gpio-ranges avaiable gpio: mcp23s08: Add option to configure IRQ output polarity as active high gpio: fix deferred probe detection for legacy API serial: mctrl_gpio: use gpiod_set_array function mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function gpio: remove const modifier from gpiod_get_direction() gpio: remove gpio_descs global array gpio: mxs: implement get_direction callback gpio: em: Use dynamic allocation of GPIOs gpio: Check if base is positive before calling gpio_is_valid() gpio: mcp23s08: Add simple IRQ support for SPI devices gpio: mcp23s08: request a shared interrupt gpio: mcp23s08: Do not free unrequested interrupt gpio: rcar: Add r8a7793 and r8a7794 support gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function gpiolib: allow simultaneous setting of multiple GPIO outputs gpio: mvebu: add suspend/resume support gpio: gpio-davinci: remove duplicate check on resource ..
112 lines
4.6 KiB
Makefile
112 lines
4.6 KiB
Makefile
# generic gpio support: platform drivers, dedicated expander chips, etc
|
|
|
|
ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
|
|
|
|
obj-$(CONFIG_GPIO_DEVRES) += devres.o
|
|
obj-$(CONFIG_GPIOLIB) += gpiolib.o
|
|
obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o
|
|
obj-$(CONFIG_OF_GPIO) += gpiolib-of.o
|
|
obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o
|
|
obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o
|
|
|
|
# Device drivers. Generally keep list sorted alphabetically
|
|
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
|
|
|
|
obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o
|
|
obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o
|
|
obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o
|
|
obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
|
|
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
|
|
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
|
|
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
|
|
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
|
|
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
|
|
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
|
|
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
|
|
obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
|
|
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
|
|
obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
|
|
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
|
|
obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
|
|
obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
|
|
obj-$(CONFIG_GPIO_EM) += gpio-em.o
|
|
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
|
|
obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
|
|
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
|
|
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
|
|
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
|
|
obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
|
|
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
|
|
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
|
|
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
|
|
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
|
|
obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
|
|
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
|
|
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
|
|
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
|
|
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
|
|
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
|
|
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
|
|
obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o
|
|
obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o
|
|
obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o
|
|
obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
|
|
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
|
|
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
|
|
obj-$(CONFIG_GPIO_MOXART) += gpio-moxart.o
|
|
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
|
|
obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
|
|
obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
|
|
obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o
|
|
obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
|
|
obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
|
|
obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
|
|
obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
|
|
obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
|
|
obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
|
|
obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
|
|
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
|
|
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
|
|
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
|
|
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
|
|
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
|
|
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
|
|
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
|
|
obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
|
|
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
|
|
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
|
|
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
|
|
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
|
|
obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
|
|
obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o
|
|
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
|
|
obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o
|
|
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
|
|
obj-$(CONFIG_GPIO_SYSCON) += gpio-syscon.o
|
|
obj-$(CONFIG_GPIO_TB10X) += gpio-tb10x.o
|
|
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
|
|
obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o
|
|
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
|
|
obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o
|
|
obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o
|
|
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
|
|
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
|
|
obj-$(CONFIG_GPIO_TS5500) += gpio-ts5500.o
|
|
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
|
|
obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o
|
|
obj-$(CONFIG_GPIO_TZ1090) += gpio-tz1090.o
|
|
obj-$(CONFIG_GPIO_TZ1090_PDC) += gpio-tz1090-pdc.o
|
|
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
|
|
obj-$(CONFIG_GPIO_VF610) += gpio-vf610.o
|
|
obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o
|
|
obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o
|
|
obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
|
|
obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
|
|
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
|
|
obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
|
|
obj-$(CONFIG_GPIO_XGENE) += gpio-xgene.o
|
|
obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
|
|
obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
|
|
obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
|
|
obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
|