mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 21:51:40 +00:00
23902f98f8
Hewlett-Packard (and some HP Compaq) business-class computers report hardware monitoring information via WMI. This driver exposes that information to hwmon. Initial support is provided for temperature, fan speed, and intrusion sensor types. Provisional support is provided for voltage and current sensor types. HP's WMI implementation permits many other types of numeric sensors. Therefore, a debugfs interface is also provided to enumerate and inspect all numeric sensors visible on the WMI side. This should facilitate adding support for other sensor types in the future. Tested on a HP Z420, a HP EliteOne 800 G1, and a HP Compaq Elite 8300 SFF. Note that provisionally supported sensor types are untested and seem to be rare-to-nonexistent in the wild, having been encountered neither on test systems nor in ACPI dumps from the Linux Hardware Database. They are included because their popularity in general makes their presence on past or future HP systems plausible and because no doubt exists as to how the sensors themselves would be represented in WMI (alarm attributes will need to wait for hardware to be located). A 2005 HP whitepaper gives the relevant sensor object MOF definition and sensor value scaling calculation, and both this driver and the official HP Performance Advisor utility comply with them (confirmed in the latter case by reverse engineering). Link: https://h20331.www2.hp.com/hpsub/downloads/cmi_whitepaper.pdf Signed-off-by: James Seo <james@equiv.tech> Link: https://lore.kernel.org/r/20230522115645.509701-1-james@equiv.tech [groeck: Set error return value for intrusion writes to -EINVAL. Always accept writes of 0 even if there was no intrusion. ] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2439 lines
74 KiB
Plaintext
2439 lines
74 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Hardware monitoring chip drivers configuration
|
|
#
|
|
|
|
menuconfig HWMON
|
|
tristate "Hardware Monitoring support"
|
|
depends on HAS_IOMEM
|
|
default y
|
|
help
|
|
Hardware monitoring devices let you monitor the hardware health
|
|
of a system. Most modern motherboards include such a device. It
|
|
can include temperature sensors, voltage sensors, fan speed
|
|
sensors and various additional features such as the ability to
|
|
control the speed of the fans. If you want this support you
|
|
should say Y here and also to the specific driver(s) for your
|
|
sensors chip(s) below.
|
|
|
|
To find out which specific driver(s) you need, use the
|
|
sensors-detect script from the lm_sensors package. Read
|
|
<file:Documentation/hwmon/userspace-tools.rst> for details.
|
|
|
|
This support can also be built as a module. If so, the module
|
|
will be called hwmon.
|
|
|
|
if HWMON
|
|
|
|
config HWMON_VID
|
|
tristate
|
|
|
|
config HWMON_DEBUG_CHIP
|
|
bool "Hardware Monitoring Chip debugging messages"
|
|
help
|
|
Say Y here if you want the I2C chip drivers to produce a bunch of
|
|
debug messages to the system log. Select this if you are having
|
|
a problem with I2C support and want to see more of what is going
|
|
on.
|
|
|
|
comment "Native drivers"
|
|
|
|
config SENSORS_ABITUGURU
|
|
tristate "Abit uGuru (rev 1 & 2)"
|
|
depends on X86 && DMI
|
|
help
|
|
If you say yes here you get support for the sensor part of the first
|
|
and second revision of the Abit uGuru chip. The voltage and frequency
|
|
control parts of the Abit uGuru are not supported. The Abit uGuru
|
|
chip can be found on Abit uGuru featuring motherboards (most modern
|
|
Abit motherboards from before end 2005). For more info and a list
|
|
of which motherboards have which revision see
|
|
Documentation/hwmon/abituguru.rst
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called abituguru.
|
|
|
|
config SENSORS_ABITUGURU3
|
|
tristate "Abit uGuru (rev 3)"
|
|
depends on X86 && DMI
|
|
help
|
|
If you say yes here you get support for the sensor part of the
|
|
third revision of the Abit uGuru chip. Only reading the sensors
|
|
and their settings is supported. The third revision of the Abit
|
|
uGuru chip can be found on recent Abit motherboards (since end
|
|
2005). For more info and a list of which motherboards have which
|
|
revision see Documentation/hwmon/abituguru3.rst
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called abituguru3.
|
|
|
|
config SENSORS_SMPRO
|
|
tristate "Ampere's Altra SMpro hardware monitoring driver"
|
|
depends on MFD_SMPRO
|
|
help
|
|
If you say yes here you get support for the thermal, voltage,
|
|
current and power sensors of Ampere's Altra processor family SoC
|
|
with SMpro co-processor.
|
|
|
|
config SENSORS_AD7314
|
|
tristate "Analog Devices AD7314 and compatibles"
|
|
depends on SPI
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AD7314, ADT7301 and ADT7302 temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ad7314.
|
|
|
|
config SENSORS_AD7414
|
|
tristate "Analog Devices AD7414"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AD7414 temperature monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ad7414.
|
|
|
|
config SENSORS_AD7418
|
|
tristate "Analog Devices AD7416, AD7417 and AD7418"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AD7416, AD7417 and AD7418 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ad7418.
|
|
|
|
config SENSORS_ADM1021
|
|
tristate "Analog Devices ADM1021 and compatibles"
|
|
depends on I2C
|
|
depends on SENSORS_LM90=n
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1021
|
|
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
|
|
Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1021.
|
|
|
|
config SENSORS_ADM1025
|
|
tristate "Analog Devices ADM1025 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1025
|
|
and Philips NE1619 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1025.
|
|
|
|
config SENSORS_ADM1026
|
|
tristate "Analog Devices ADM1026 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1026
|
|
sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1026.
|
|
|
|
config SENSORS_ADM1029
|
|
tristate "Analog Devices ADM1029"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1029
|
|
sensor chip.
|
|
Very rare chip, please let us know you use it.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1029.
|
|
|
|
config SENSORS_ADM1031
|
|
tristate "Analog Devices ADM1031 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1031
|
|
and ADM1030 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1031.
|
|
|
|
config SENSORS_ADM1177
|
|
tristate "Analog Devices ADM1177 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM1177
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm1177.
|
|
|
|
config SENSORS_ADM9240
|
|
tristate "Analog Devices ADM9240 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Analog Devices ADM9240,
|
|
Dallas DS1780, National Semiconductor LM81 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adm9240.
|
|
|
|
config SENSORS_ADT7X10
|
|
tristate
|
|
select REGMAP
|
|
help
|
|
This module contains common code shared by the ADT7310/ADT7320 and
|
|
ADT7410/ADT7420 temperature monitoring chip drivers.
|
|
|
|
If built as a module, the module will be called adt7x10.
|
|
|
|
config SENSORS_ADT7310
|
|
tristate "Analog Devices ADT7310/ADT7320"
|
|
depends on SPI_MASTER
|
|
select SENSORS_ADT7X10
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7310 and ADT7320 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7310.
|
|
|
|
config SENSORS_ADT7410
|
|
tristate "Analog Devices ADT7410/ADT7420"
|
|
depends on I2C
|
|
select SENSORS_ADT7X10
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7410 and ADT7420 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7410.
|
|
|
|
config SENSORS_ADT7411
|
|
tristate "Analog Devices ADT7411"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7411 voltage and temperature monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7411.
|
|
|
|
config SENSORS_ADT7462
|
|
tristate "Analog Devices ADT7462"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7462 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7462.
|
|
|
|
config SENSORS_ADT7470
|
|
tristate "Analog Devices ADT7470"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7470 temperature monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7470.
|
|
|
|
config SENSORS_ADT7475
|
|
tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
|
|
chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adt7475.
|
|
|
|
config SENSORS_AHT10
|
|
tristate "Aosong AHT10, AHT20"
|
|
depends on I2C
|
|
select CRC8
|
|
help
|
|
If you say yes here, you get support for the Aosong AHT10 and AHT20
|
|
temperature and humidity sensors
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called aht10.
|
|
|
|
config SENSORS_AQUACOMPUTER_D5NEXT
|
|
tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next"
|
|
depends on USB_HID
|
|
select CRC16
|
|
help
|
|
If you say yes here you get support for sensors and fans of
|
|
the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan
|
|
controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow
|
|
Next sensor, where available.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called aquacomputer_d5next.
|
|
|
|
config SENSORS_AS370
|
|
tristate "Synaptics AS370 SoC hardware monitoring driver"
|
|
help
|
|
If you say yes here you get support for the PVT sensors of
|
|
the Synaptics AS370 SoC
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called as370-hwmon.
|
|
|
|
|
|
config SENSORS_ASC7621
|
|
tristate "Andigilog aSC7621"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the aSC7621
|
|
family of SMBus sensors chip found on most Intel X38, X48, X58,
|
|
945, 965 and 975 desktop boards. Currently supported chips:
|
|
aSC7621
|
|
aSC7621a
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asc7621.
|
|
|
|
config SENSORS_AXI_FAN_CONTROL
|
|
tristate "Analog Devices FAN Control HDL Core driver"
|
|
help
|
|
If you say yes here you get support for the Analog Devices
|
|
AXI HDL FAN monitoring core.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called axi-fan-control
|
|
|
|
config SENSORS_K8TEMP
|
|
tristate "AMD Athlon64/FX or Opteron temperature sensor"
|
|
depends on X86 && PCI
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor(s) inside your CPU. Supported is whole AMD K8
|
|
microarchitecture. Please note that you will need at least
|
|
lm-sensors 2.10.1 for proper userspace support.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called k8temp.
|
|
|
|
config SENSORS_K10TEMP
|
|
tristate "AMD Family 10h+ temperature sensor"
|
|
depends on X86 && PCI && AMD_NB
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor(s) inside your CPU. Supported are later revisions of
|
|
the AMD Family 10h and all revisions of the AMD Family 11h,
|
|
12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
|
|
and 16h (Kabini/Mullins) microarchitectures.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called k10temp.
|
|
|
|
config SENSORS_FAM15H_POWER
|
|
tristate "AMD Family 15h processor power"
|
|
depends on X86 && PCI && CPU_SUP_AMD
|
|
help
|
|
If you say yes here you get support for processor power
|
|
information of your AMD family 15h CPU.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fam15h_power.
|
|
|
|
config SENSORS_APPLESMC
|
|
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
|
|
depends on INPUT && X86
|
|
select NEW_LEDS
|
|
select LEDS_CLASS
|
|
help
|
|
This driver provides support for the Apple System Management
|
|
Controller, which provides an accelerometer (Apple Sudden Motion
|
|
Sensor), light sensors, temperature sensors, keyboard backlight
|
|
control and fan control.
|
|
|
|
Only Intel-based Apple's computers are supported (MacBook Pro,
|
|
MacBook, MacMini).
|
|
|
|
Data from the different sensors, keyboard backlight control and fan
|
|
control are accessible via sysfs.
|
|
|
|
This driver also provides an absolute input class device, allowing
|
|
the laptop to act as a pinball machine-esque joystick.
|
|
|
|
Say Y here if you have an applicable laptop and want to experience
|
|
the awesome power of applesmc.
|
|
|
|
config SENSORS_ARM_SCMI
|
|
tristate "ARM SCMI Sensors"
|
|
depends on ARM_SCMI_PROTOCOL
|
|
depends on THERMAL || !THERMAL_OF
|
|
help
|
|
This driver provides support for temperature, voltage, current
|
|
and power sensors available on SCMI based platforms. The actual
|
|
number and type of sensors exported depend on the platform.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called scmi-hwmon.
|
|
|
|
config SENSORS_ARM_SCPI
|
|
tristate "ARM SCPI Sensors"
|
|
depends on ARM_SCPI_PROTOCOL
|
|
depends on THERMAL || !THERMAL_OF
|
|
help
|
|
This driver provides support for temperature, voltage, current
|
|
and power sensors available on ARM Ltd's SCP based platforms. The
|
|
actual number and type of sensors exported depend on the platform.
|
|
|
|
config SENSORS_ASB100
|
|
tristate "Asus ASB100 Bach"
|
|
depends on (X86 || COMPILE_TEST) && I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the ASB100 Bach sensor
|
|
chip found on some Asus mainboards.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asb100.
|
|
|
|
config SENSORS_ASPEED
|
|
tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
|
|
depends on ARCH_ASPEED || COMPILE_TEST
|
|
depends on THERMAL || THERMAL=n
|
|
select REGMAP
|
|
help
|
|
This driver provides support for ASPEED AST2400/AST2500 PWM
|
|
and Fan Tacho controllers.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called aspeed_pwm_tacho.
|
|
|
|
config SENSORS_ATXP1
|
|
tristate "Attansic ATXP1 VID controller"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Attansic ATXP1 VID
|
|
controller.
|
|
|
|
If your board have such a chip, you are able to control your CPU
|
|
core and other voltages.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called atxp1.
|
|
|
|
config SENSORS_BT1_PVT
|
|
tristate "Baikal-T1 Process, Voltage, Temperature sensor driver"
|
|
depends on MIPS_BAIKAL_T1 || COMPILE_TEST
|
|
select POLYNOMIAL
|
|
help
|
|
If you say yes here you get support for Baikal-T1 PVT sensor
|
|
embedded into the SoC.
|
|
|
|
This driver can also be built as a module. If so, the module will be
|
|
called bt1-pvt.
|
|
|
|
config SENSORS_BT1_PVT_ALARMS
|
|
bool "Enable Baikal-T1 PVT sensor alarms"
|
|
depends on SENSORS_BT1_PVT
|
|
help
|
|
Baikal-T1 PVT IP-block provides threshold registers for each
|
|
supported sensor. But the corresponding interrupts might be
|
|
generated by the thresholds comparator only in synchronization with
|
|
a data conversion. Additionally there is only one sensor data can
|
|
be converted at a time. All of these makes the interface impossible
|
|
to be used for the hwmon alarms implementation without periodic
|
|
switch between the PVT sensors. By default the data conversion is
|
|
performed on demand from the user-space. If this config is enabled
|
|
the data conversion will be periodically performed and the data will be
|
|
saved in the internal driver cache.
|
|
|
|
config SENSORS_CORSAIR_CPRO
|
|
tristate "Corsair Commander Pro controller"
|
|
depends on HID
|
|
help
|
|
If you say yes here you get support for the Corsair Commander Pro
|
|
controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called corsair-cpro.
|
|
|
|
config SENSORS_CORSAIR_PSU
|
|
tristate "Corsair PSU HID controller"
|
|
depends on HID
|
|
help
|
|
If you say yes here you get support for Corsair PSUs with a HID
|
|
interface.
|
|
Currently this driver supports the (RM/HX)550i, (RM/HX)650i,
|
|
(RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies
|
|
by Corsair.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called corsair-psu.
|
|
|
|
config SENSORS_DRIVETEMP
|
|
tristate "Hard disk drives with temperature sensors"
|
|
depends on SCSI && ATA
|
|
help
|
|
If you say yes you get support for the temperature sensor on
|
|
hard disk drives.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called drivetemp.
|
|
|
|
config SENSORS_DS620
|
|
tristate "Dallas Semiconductor DS620"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Dallas Semiconductor
|
|
DS620 sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ds620.
|
|
|
|
config SENSORS_DS1621
|
|
tristate "Dallas Semiconductor DS1621 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Dallas Semiconductor/Maxim
|
|
Integrated DS1621 sensor chips and compatible models including:
|
|
|
|
- Dallas Semiconductor DS1625
|
|
- Maxim Integrated DS1631
|
|
- Maxim Integrated DS1721
|
|
- Maxim Integrated DS1731
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ds1621.
|
|
|
|
config SENSORS_DELL_SMM
|
|
tristate "Dell laptop SMM BIOS hwmon driver"
|
|
depends on X86
|
|
imply THERMAL
|
|
help
|
|
This hwmon driver adds support for reporting temperature of different
|
|
sensors and controls the fans on Dell laptops via System Management
|
|
Mode provided by Dell BIOS.
|
|
|
|
When option I8K is also enabled this driver provides legacy /proc/i8k
|
|
userspace interface for i8kutils package.
|
|
|
|
config I8K
|
|
bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver"
|
|
depends on SENSORS_DELL_SMM
|
|
depends on PROC_FS
|
|
help
|
|
This option enables the legacy /proc/i8k userspace interface of the
|
|
dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS
|
|
version, temperatures and allows control of fan speeds of some Dell
|
|
laptops. Sometimes it also reports power and hotkey status.
|
|
|
|
This interface is required to run programs from the i8kutils package.
|
|
|
|
Say Y if you intend to run userspace programs that use this interface.
|
|
Say N otherwise.
|
|
|
|
config SENSORS_DA9052_ADC
|
|
tristate "Dialog DA9052/DA9053 ADC"
|
|
depends on PMIC_DA9052
|
|
help
|
|
Say y here to support the ADC found on Dialog Semiconductor
|
|
DA9052-BC and DA9053-AA/Bx PMICs.
|
|
|
|
This driver can also be built as module. If so, the module
|
|
will be called da9052-hwmon.
|
|
|
|
config SENSORS_DA9055
|
|
tristate "Dialog Semiconductor DA9055 ADC"
|
|
depends on MFD_DA9055
|
|
help
|
|
If you say yes here you get support for ADC on the Dialog
|
|
Semiconductor DA9055 PMIC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called da9055-hwmon.
|
|
|
|
config SENSORS_I5K_AMB
|
|
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
|
|
depends on PCI
|
|
help
|
|
If you say yes here you get support for FB-DIMM AMB temperature
|
|
monitoring chips on systems with the Intel 5000 series chipset.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i5k_amb.
|
|
|
|
config SENSORS_SPARX5
|
|
tristate "Sparx5 SoC temperature sensor"
|
|
depends on ARCH_SPARX5 || COMPILE_TEST
|
|
help
|
|
If you say yes here you get support for temperature monitoring
|
|
with the Microchip Sparx5 SoC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sparx5-temp.
|
|
|
|
config SENSORS_F71805F
|
|
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
|
|
Super-I/O chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f71805f.
|
|
|
|
config SENSORS_F71882FG
|
|
tristate "Fintek F71882FG and compatibles"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of many Fintek Super-I/O (LPC) chips. The currently
|
|
supported chips are:
|
|
F71808E/A
|
|
F71858FG
|
|
F71862FG
|
|
F71863FG
|
|
F71869F/E/A
|
|
F71882FG
|
|
F71883FG
|
|
F71889FG/ED/A
|
|
F8000
|
|
F81801U
|
|
F81865F
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f71882fg.
|
|
|
|
config SENSORS_F75375S
|
|
tristate "Fintek F75375S/SP, F75373 and F75387"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
features of the Fintek F75375S/SP, F75373 and F75387
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called f75375s.
|
|
|
|
config SENSORS_GSC
|
|
tristate "Gateworks System Controller ADC"
|
|
depends on MFD_GATEWORKS_GSC
|
|
help
|
|
Support for the Gateworks System Controller A/D converters.
|
|
|
|
To compile this driver as a module, choose M here:
|
|
the module will be called gsc-hwmon.
|
|
|
|
config SENSORS_MC13783_ADC
|
|
tristate "Freescale MC13783/MC13892 ADC"
|
|
depends on MFD_MC13XXX
|
|
help
|
|
Support for the A/D converter on MC13783 and MC13892 PMIC.
|
|
|
|
config SENSORS_FSCHMD
|
|
tristate "Fujitsu Siemens Computers sensor chips"
|
|
depends on (X86 || COMPILE_TEST) && I2C
|
|
help
|
|
If you say yes here you get support for the following Fujitsu
|
|
Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
|
|
Heimdall, Heracles, Hades and Syleus including support for the
|
|
integrated watchdog.
|
|
|
|
This is a merged driver for FSC sensor chips replacing the fscpos,
|
|
fscscy and fscher drivers and adding support for several other FSC
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called fschmd.
|
|
|
|
config SENSORS_FTSTEUTATES
|
|
tristate "Fujitsu Technology Solutions sensor chip Teutates"
|
|
depends on I2C && WATCHDOG
|
|
select WATCHDOG_CORE
|
|
help
|
|
If you say yes here you get support for the Fujitsu Technology
|
|
Solutions (FTS) sensor chip "Teutates" including support for
|
|
the integrated watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ftsteutates.
|
|
|
|
config SENSORS_GL518SM
|
|
tristate "Genesys Logic GL518SM"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Genesys Logic GL518SM
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gl518sm.
|
|
|
|
config SENSORS_GL520SM
|
|
tristate "Genesys Logic GL520SM"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for Genesys Logic GL520SM
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gl520sm.
|
|
|
|
config SENSORS_G760A
|
|
tristate "GMT G760A"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Global Mixed-mode
|
|
Technology Inc G760A fan speed PWM controller chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called g760a.
|
|
|
|
config SENSORS_G762
|
|
tristate "GMT G762 and G763"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Global Mixed-mode
|
|
Technology Inc G762 and G763 fan speed PWM controller chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called g762.
|
|
|
|
config SENSORS_GPIO_FAN
|
|
tristate "GPIO fan"
|
|
depends on OF_GPIO
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
depends on THERMAL || THERMAL=n
|
|
help
|
|
If you say yes here you get support for fans connected to GPIO lines.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called gpio-fan.
|
|
|
|
config SENSORS_GXP_FAN_CTRL
|
|
tristate "HPE GXP fan controller"
|
|
depends on ARCH_HPE_GXP || COMPILE_TEST
|
|
help
|
|
If you say yes here you get support for GXP fan control functionality.
|
|
|
|
The GXP controls fan function via the CPLD through the use of PWM
|
|
registers. This driver reports status and pwm setting of the fans.
|
|
|
|
config SENSORS_HIH6130
|
|
tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Honeywell Humidicon
|
|
HIH-6130 and HIH-6131 Humidicon humidity sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called hih6130.
|
|
|
|
config SENSORS_IBMAEM
|
|
tristate "IBM Active Energy Manager temperature/power sensors and control"
|
|
select IPMI_SI
|
|
depends on IPMI_HANDLER
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
power sensors and capping hardware in various IBM System X
|
|
servers that support Active Energy Manager. This includes
|
|
the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
|
|
and certain HC10/HS2x/LS2x/QS2x blades.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ibmaem.
|
|
|
|
config SENSORS_IBMPEX
|
|
tristate "IBM PowerExecutive temperature/power sensors"
|
|
select IPMI_SI
|
|
depends on IPMI_HANDLER
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
power sensors in various IBM System X servers that support
|
|
PowerExecutive. So far this includes the x3350, x3550, x3650,
|
|
x3655, and x3755; the x3800, x3850, and x3950 models that have
|
|
PCI Express; and some of the HS2x, LS2x, and QS2x blades.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ibmpex.
|
|
|
|
config SENSORS_IBMPOWERNV
|
|
tristate "IBM POWERNV platform sensors"
|
|
depends on PPC_POWERNV
|
|
default y
|
|
help
|
|
If you say yes here you get support for the temperature/fan/power
|
|
sensors on your PowerNV platform.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ibmpowernv.
|
|
|
|
config SENSORS_IIO_HWMON
|
|
tristate "Hwmon driver that uses channels specified via iio maps"
|
|
depends on IIO
|
|
help
|
|
This is a platform driver that in combination with a suitable
|
|
map allows IIO devices to provide basic hwmon functionality
|
|
for those channels specified in the map. This map can be provided
|
|
either via platform data or the device tree bindings.
|
|
|
|
config SENSORS_I5500
|
|
tristate "Intel 5500/5520/X58 temperature sensor"
|
|
depends on X86 && PCI
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside the Intel 5500, 5520 and X58 chipsets.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i5500_temp.
|
|
|
|
config SENSORS_CORETEMP
|
|
tristate "Intel Core/Core2/Atom temperature sensor"
|
|
depends on X86
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside your CPU. Most of the family 6 CPUs
|
|
are supported. Check Documentation/hwmon/coretemp.rst for details.
|
|
|
|
config SENSORS_IT87
|
|
tristate "ITE IT87xx and compatibles"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
|
|
IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
|
|
IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
|
|
IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
|
|
clone.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called it87.
|
|
|
|
config SENSORS_JC42
|
|
tristate "JEDEC JC42.4 compliant memory module temperature sensors"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here, you get support for JEDEC JC42.4 compliant
|
|
temperature sensors, which are used on many DDR3 memory modules for
|
|
mobile devices and servers. Support will include, but not be limited
|
|
to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
|
|
MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
|
|
STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called jc42.
|
|
|
|
config SENSORS_POWR1220
|
|
tristate "Lattice POWR1220 Power Monitoring"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the Lattice POWR1220 isp Power Supply Monitoring,
|
|
Sequencing and Margining Controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called powr1220.
|
|
|
|
config SENSORS_LAN966X
|
|
tristate "Microchip LAN966x Hardware Monitoring"
|
|
depends on SOC_LAN966 || COMPILE_TEST
|
|
select REGMAP
|
|
select POLYNOMIAL
|
|
help
|
|
If you say yes here you get support for temperature monitoring
|
|
on the Microchip LAN966x SoC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lan966x-hwmon.
|
|
|
|
config SENSORS_LINEAGE
|
|
tristate "Lineage Compact Power Line Power Entry Module"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Lineage Compact Power Line
|
|
series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
|
|
CP2000DC, CP2725, and others.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lineage-pem.
|
|
|
|
config SENSORS_LOCHNAGAR
|
|
tristate "Lochnagar Hardware Monitor"
|
|
depends on MFD_LOCHNAGAR
|
|
help
|
|
If you say yes here you get support for Lochnagar 2 temperature,
|
|
voltage and current sensors abilities.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lochnagar-hwmon.
|
|
|
|
config SENSORS_LTC2945
|
|
tristate "Linear Technology LTC2945"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC2945
|
|
I2C System Monitor.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc2945.
|
|
|
|
config SENSORS_LTC2947
|
|
tristate
|
|
|
|
config SENSORS_LTC2947_I2C
|
|
tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
select SENSORS_LTC2947
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC2947
|
|
I2C High Precision Power and Energy Monitor
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc2947-i2c.
|
|
|
|
config SENSORS_LTC2947_SPI
|
|
tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI"
|
|
depends on SPI_MASTER
|
|
select REGMAP_SPI
|
|
select SENSORS_LTC2947
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC2947
|
|
SPI High Precision Power and Energy Monitor
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc2947-spi.
|
|
|
|
config SENSORS_LTC2990
|
|
tristate "Linear Technology LTC2990"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC2990
|
|
I2C System Monitor. The LTC2990 supports a combination of voltage,
|
|
current and temperature monitoring.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc2990.
|
|
|
|
config SENSORS_LTC2992
|
|
tristate "Linear Technology LTC2992"
|
|
depends on I2C
|
|
depends on GPIOLIB
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC2992
|
|
I2C System Monitor. The LTC2992 measures current, voltage, and
|
|
power of two supplies.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc2992.
|
|
|
|
config SENSORS_LTC4151
|
|
tristate "Linear Technology LTC4151"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4151
|
|
High Voltage I2C Current and Voltage Monitor interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4151.
|
|
|
|
config SENSORS_LTC4215
|
|
tristate "Linear Technology LTC4215"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4215
|
|
Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4215.
|
|
|
|
config SENSORS_LTC4222
|
|
tristate "Linear Technology LTC4222"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4222
|
|
Dual Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4222.
|
|
|
|
config SENSORS_LTC4245
|
|
tristate "Linear Technology LTC4245"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4245
|
|
Multiple Supply Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4245.
|
|
|
|
config SENSORS_LTC4260
|
|
tristate "Linear Technology LTC4260"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4260
|
|
Positive Voltage Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4260.
|
|
|
|
config SENSORS_LTC4261
|
|
tristate "Linear Technology LTC4261"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Linear Technology LTC4261
|
|
Negative Voltage Hot Swap Controller I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4261.
|
|
|
|
config SENSORS_LTQ_CPUTEMP
|
|
bool "Lantiq cpu temperature sensor driver"
|
|
depends on SOC_XWAY
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside your CPU.
|
|
|
|
config SENSORS_MAX1111
|
|
tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
|
|
depends on SPI_MASTER
|
|
help
|
|
Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
|
|
ADC chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1111.
|
|
|
|
config SENSORS_MAX127
|
|
tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System"
|
|
depends on I2C
|
|
help
|
|
Say y here to support Maxim's MAX127 DAS chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max127.
|
|
|
|
config SENSORS_MAX16065
|
|
tristate "Maxim MAX16065 System Manager and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
capabilities of the following Maxim System Manager chips.
|
|
MAX16065
|
|
MAX16066
|
|
MAX16067
|
|
MAX16068
|
|
MAX16070
|
|
MAX16071
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max16065.
|
|
|
|
config SENSORS_MAX1619
|
|
tristate "Maxim MAX1619 sensor chip"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for MAX1619 sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1619.
|
|
|
|
config SENSORS_MAX1668
|
|
tristate "Maxim MAX1668 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for MAX1668, MAX1989 and
|
|
MAX1805 chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max1668.
|
|
|
|
config SENSORS_MAX197
|
|
tristate "Maxim MAX197 and compatibles"
|
|
help
|
|
Support for the Maxim MAX197 A/D converter.
|
|
Support will include, but not be limited to, MAX197, and MAX199.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max197.
|
|
|
|
config SENSORS_MAX31722
|
|
tristate "MAX31722 temperature sensor"
|
|
depends on SPI
|
|
help
|
|
Support for the Maxim Integrated MAX31722/MAX31723 digital
|
|
thermometers/thermostats operating over an SPI interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max31722.
|
|
|
|
config SENSORS_MAX31730
|
|
tristate "MAX31730 temperature sensor"
|
|
depends on I2C
|
|
help
|
|
Support for the Maxim Integrated MAX31730 3-Channel Remote
|
|
Temperature Sensor.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max31730.
|
|
|
|
config SENSORS_MAX31760
|
|
tristate "MAX31760 fan speed controller"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Support for the Analog Devices MAX31760 Precision Fan-Speed
|
|
Controller. MAX31760 integrates temperature sensing along with
|
|
precision PWM fan control.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max31760.
|
|
|
|
config MAX31827
|
|
tristate "MAX31827 low-power temperature switch and similar devices"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for MAX31827, MAX31828 and
|
|
MAX31829 low-power temperature switches and sensors connected with I2C.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max31827.
|
|
|
|
config SENSORS_MAX6620
|
|
tristate "Maxim MAX6620 fan controller"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the MAX6620
|
|
fan controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6620.
|
|
|
|
config SENSORS_MAX6621
|
|
tristate "Maxim MAX6621 sensor chip"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for MAX6621 sensor chip.
|
|
MAX6621 is a PECI-to-I2C translator provides an efficient,
|
|
low-cost solution for PECI-to-SMBus/I2C protocol conversion.
|
|
It allows reading the temperature from the PECI-compliant
|
|
host directly from up to four PECI-enabled CPUs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6621.
|
|
|
|
config SENSORS_MAX6639
|
|
tristate "Maxim MAX6639 sensor chip"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the MAX6639
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6639.
|
|
|
|
config SENSORS_MAX6642
|
|
tristate "Maxim MAX6642 sensor chip"
|
|
depends on I2C
|
|
depends on SENSORS_LM90=n
|
|
help
|
|
If you say yes here you get support for MAX6642 sensor chip.
|
|
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
|
|
with Overtemperature Alarm from Maxim.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6642.
|
|
|
|
config SENSORS_MAX6650
|
|
tristate "Maxim MAX6650 sensor chip"
|
|
depends on I2C
|
|
depends on THERMAL || THERMAL=n
|
|
help
|
|
If you say yes here you get support for the MAX6650 / MAX6651
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6650.
|
|
|
|
config SENSORS_MAX6697
|
|
tristate "Maxim MAX6697 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for MAX6581, MAX6602, MAX6622,
|
|
MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
|
|
temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max6697.
|
|
|
|
config SENSORS_MAX31790
|
|
tristate "Maxim MAX31790 sensor chip"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for 6-Channel PWM-Output
|
|
Fan RPM Controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called max31790.
|
|
|
|
config SENSORS_MC34VR500
|
|
tristate "NXP MC34VR500 hardware monitoring driver"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the temperature and input
|
|
voltage sensors of the NXP MC34VR500.
|
|
|
|
config SENSORS_MCP3021
|
|
tristate "Microchip MCP3021 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for MCP3021 and MCP3221.
|
|
The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
|
|
with 12-bit resolution.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called mcp3021.
|
|
|
|
config SENSORS_MLXREG_FAN
|
|
tristate "Mellanox FAN driver"
|
|
depends on MELLANOX_PLATFORM
|
|
imply THERMAL
|
|
select REGMAP
|
|
help
|
|
This option enables support for the FAN control on the Mellanox
|
|
Ethernet and InfiniBand switches. The driver can be activated by the
|
|
platform device add call. Say Y to enable these. To compile this
|
|
driver as a module, choose 'M' here: the module will be called
|
|
mlxreg-fan.
|
|
|
|
config SENSORS_TC654
|
|
tristate "Microchip TC654/TC655 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for TC654 and TC655.
|
|
The TC654 and TC655 are PWM mode fan speed controllers with
|
|
FanSense technology for use with brushless DC fans.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tc654.
|
|
|
|
config SENSORS_TPS23861
|
|
tristate "Texas Instruments TPS23861 PoE PSE"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments
|
|
TPS23861 802.3at PoE PSE chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tps23861.
|
|
|
|
config SENSORS_MENF21BMC_HWMON
|
|
tristate "MEN 14F021P00 BMC Hardware Monitoring"
|
|
depends on MFD_MENF21BMC
|
|
help
|
|
Say Y here to include support for the MEN 14F021P00 BMC
|
|
hardware monitoring.
|
|
|
|
This driver can also be built as a module. If so the module
|
|
will be called menf21bmc_hwmon.
|
|
|
|
config SENSORS_MR75203
|
|
tristate "Moortec Semiconductor MR75203 PVT Controller"
|
|
select REGMAP_MMIO
|
|
help
|
|
If you say yes here you get support for Moortec MR75203
|
|
PVT controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called mr75203.
|
|
|
|
config SENSORS_ADCXX
|
|
tristate "National Semiconductor ADCxxxSxxx"
|
|
depends on SPI_MASTER
|
|
help
|
|
If you say yes here you get support for the National Semiconductor
|
|
ADC<bb><c>S<sss> chip family, where
|
|
* bb is the resolution in number of bits (8, 10, 12)
|
|
* c is the number of channels (1, 2, 4, 8)
|
|
* sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
|
|
kSPS and 101 for 1 MSPS)
|
|
|
|
Examples : ADC081S101, ADC124S501, ...
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adcxx.
|
|
|
|
config SENSORS_LM63
|
|
tristate "National Semiconductor LM63 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the National
|
|
Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
|
|
sensors with integrated fan control. Such chips are found
|
|
on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
|
|
others.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm63.
|
|
|
|
config SENSORS_LM70
|
|
tristate "National Semiconductor LM70 and compatibles"
|
|
depends on SPI_MASTER
|
|
help
|
|
If you say yes here you get support for the National Semiconductor
|
|
LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124,
|
|
TMP125 digital temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm70.
|
|
|
|
config SENSORS_LM73
|
|
tristate "National Semiconductor LM73"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM73
|
|
sensor chips.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm73.
|
|
|
|
config SENSORS_LM75
|
|
tristate "National Semiconductor LM75 and compatibles"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for one common type of
|
|
temperature sensor chip, with models including:
|
|
|
|
- Analog Devices ADT75
|
|
- Atmel (now Microchip) AT30TS74
|
|
- Dallas Semiconductor DS75, DS1775 and DS7505
|
|
- Global Mixed-mode Technology (GMT) G751
|
|
- Maxim MAX6625 and MAX6626
|
|
- Microchip MCP980x
|
|
- National Semiconductor LM75, LM75A
|
|
- NXP's LM75A
|
|
- ST Microelectronics STDS75
|
|
- ST Microelectronics STLM75
|
|
- TelCom (now Microchip) TCN75
|
|
- Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75,
|
|
TMP175, TMP275
|
|
|
|
This driver supports driver model based binding through board
|
|
specific I2C device tables.
|
|
|
|
It also supports the "legacy" style of driver binding. To use
|
|
that with some chips which don't replicate LM75 quirks exactly,
|
|
you may need the "force" module parameter.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm75.
|
|
|
|
config SENSORS_LM77
|
|
tristate "National Semiconductor LM77"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM77
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm77.
|
|
|
|
config SENSORS_LM78
|
|
tristate "National Semiconductor LM78 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM78,
|
|
LM78-J and LM79.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm78.
|
|
|
|
config SENSORS_LM80
|
|
tristate "National Semiconductor LM80 and LM96080"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor
|
|
LM80 and LM96080 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm80.
|
|
|
|
config SENSORS_LM83
|
|
tristate "National Semiconductor LM83 and compatibles"
|
|
depends on I2C
|
|
select REGMAP
|
|
help
|
|
If you say yes here you get support for National Semiconductor
|
|
LM82 and LM83 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm83.
|
|
|
|
config SENSORS_LM85
|
|
tristate "National Semiconductor LM85 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM85
|
|
sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
|
|
EMC6D101, EMC6D102, and EMC6D103.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm85.
|
|
|
|
config SENSORS_LM87
|
|
tristate "National Semiconductor LM87 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM87
|
|
and Analog Devices ADM1024 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm87.
|
|
|
|
config SENSORS_LM90
|
|
tristate "National Semiconductor LM90 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM84,
|
|
LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A,
|
|
ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A,
|
|
Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654,
|
|
MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695,
|
|
MAX6696,
|
|
ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218,
|
|
Winbond/Nuvoton W83L771W/G/AWG/ASG,
|
|
Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm90.
|
|
|
|
config SENSORS_LM92
|
|
tristate "National Semiconductor LM92 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM92
|
|
and Maxim MAX6635 sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm92.
|
|
|
|
config SENSORS_LM93
|
|
tristate "National Semiconductor LM93 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for National Semiconductor LM93,
|
|
LM94, and compatible sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm93.
|
|
|
|
config SENSORS_LM95234
|
|
tristate "National Semiconductor LM95234 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the LM95233 and LM95234
|
|
temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm95234.
|
|
|
|
config SENSORS_LM95241
|
|
tristate "National Semiconductor LM95241 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for LM95231 and LM95241 sensor
|
|
chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm95241.
|
|
|
|
config SENSORS_LM95245
|
|
tristate "National Semiconductor LM95245 and compatibles"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for LM95235 and LM95245
|
|
temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called lm95245.
|
|
|
|
config SENSORS_PC87360
|
|
tristate "National Semiconductor PC87360 family"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the National Semiconductor PC8736x Super-I/O chips.
|
|
The PC87360, PC87363 and PC87364 only have fan monitoring and
|
|
control. The PC87365 and PC87366 additionally have voltage and
|
|
temperature monitoring.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pc87360.
|
|
|
|
config SENSORS_PC87427
|
|
tristate "National Semiconductor PC87427"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get access to the hardware monitoring
|
|
functions of the National Semiconductor PC87427 Super-I/O chip.
|
|
The chip has two distinct logical devices, one for fan speed
|
|
monitoring and control, and one for voltage and temperature
|
|
monitoring. Fan speed monitoring and control are supported, as
|
|
well as temperature monitoring. Voltages aren't supported yet.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pc87427.
|
|
|
|
config SENSORS_NTC_THERMISTOR
|
|
tristate "NTC thermistor support"
|
|
depends on IIO
|
|
depends on THERMAL || !THERMAL_OF
|
|
help
|
|
This driver supports NTC thermistors sensor reading and its
|
|
interpretation. The driver can also monitor the temperature and
|
|
send notifications about the temperature.
|
|
|
|
Currently, this driver supports
|
|
NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
|
|
NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and
|
|
B57891S0103 from EPCOS.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ntc-thermistor.
|
|
|
|
config SENSORS_NCT6683
|
|
tristate "Nuvoton NCT6683D"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
functionality of the Nuvoton NCT6683D eSIO chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nct6683.
|
|
|
|
config SENSORS_NCT6775_CORE
|
|
tristate
|
|
select REGMAP
|
|
help
|
|
This module contains common code shared by the platform and
|
|
i2c versions of the nct6775 driver; it is not useful on its
|
|
own.
|
|
|
|
If built as a module, the module will be called
|
|
nct6775-core.
|
|
|
|
config SENSORS_NCT6775
|
|
tristate "Platform driver for Nuvoton NCT6775F and compatibles"
|
|
depends on !PPC
|
|
depends on ACPI || ACPI=n
|
|
select HWMON_VID
|
|
select SENSORS_NCT6775_CORE
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
|
|
NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
|
|
Super-I/O chips. This driver replaces the w83627ehf driver for
|
|
NCT6775F and NCT6776F.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nct6775.
|
|
|
|
config SENSORS_NCT6775_I2C
|
|
tristate "I2C driver for Nuvoton NCT6775F and compatibles"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
select SENSORS_NCT6775_CORE
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
|
|
NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
|
|
Super-I/O chips via their I2C interface.
|
|
|
|
If you're not building a kernel for a BMC, this is probably
|
|
not the driver you want (see CONFIG_SENSORS_NCT6775).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nct6775-i2c.
|
|
|
|
config SENSORS_NCT7802
|
|
tristate "Nuvoton NCT7802Y"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the Nuvoton NCT7802Y
|
|
hardware monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nct7802.
|
|
|
|
config SENSORS_NCT7904
|
|
tristate "Nuvoton NCT7904"
|
|
depends on I2C && WATCHDOG
|
|
select WATCHDOG_CORE
|
|
help
|
|
If you say yes here you get support for the Nuvoton NCT7904
|
|
hardware monitoring chip, including manual fan speed control
|
|
and support for the integrated watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nct7904.
|
|
|
|
config SENSORS_NPCM7XX
|
|
tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers"
|
|
imply THERMAL
|
|
help
|
|
This driver provides support for Nuvoton NPCM750/730/715/705 PWM
|
|
and Fan controllers.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called npcm750-pwm-fan.
|
|
|
|
config SENSORS_NSA320
|
|
tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
|
|
depends on GPIOLIB && OF
|
|
depends on MACH_KIRKWOOD || COMPILE_TEST
|
|
help
|
|
If you say yes here you get support for hardware monitoring
|
|
for the ZyXEL NSA320 Media Server and other compatible devices
|
|
(probably the NSA325 and some NSA310 variants).
|
|
|
|
The sensor data is taken from a Holtek HT46R065 microcontroller
|
|
connected to GPIO lines.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nsa320-hwmon.
|
|
|
|
config SENSORS_NZXT_KRAKEN2
|
|
tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers"
|
|
depends on USB_HID
|
|
help
|
|
If you say yes here you get support for hardware monitoring for the
|
|
NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nzxt-kraken2.
|
|
|
|
config SENSORS_NZXT_SMART2
|
|
tristate "NZXT RGB & Fan Controller/Smart Device v2"
|
|
depends on USB_HID
|
|
help
|
|
If you say yes here you get support for hardware monitoring for the
|
|
NZXT RGB & Fan Controller/Smart Device v2.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called nzxt-smart2.
|
|
|
|
source "drivers/hwmon/occ/Kconfig"
|
|
|
|
config SENSORS_OXP
|
|
tristate "OneXPlayer EC fan control"
|
|
depends on ACPI
|
|
depends on X86
|
|
help
|
|
If you say yes here you get support for fan readings and control over
|
|
OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant
|
|
boards are supported.
|
|
|
|
Can also be built as a module. In that case it will be called oxp-sensors.
|
|
|
|
config SENSORS_PCF8591
|
|
tristate "Philips PCF8591 ADC/DAC"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Philips PCF8591 4-channel
|
|
ADC, 1-channel DAC chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pcf8591.
|
|
|
|
These devices are hard to detect and rarely found on mainstream
|
|
hardware. If unsure, say N.
|
|
|
|
source "drivers/hwmon/peci/Kconfig"
|
|
|
|
source "drivers/hwmon/pmbus/Kconfig"
|
|
|
|
config SENSORS_PWM_FAN
|
|
tristate "PWM fan"
|
|
depends on (PWM && OF) || COMPILE_TEST
|
|
depends on THERMAL || THERMAL=n
|
|
help
|
|
If you say yes here you get support for fans connected to PWM lines.
|
|
The driver uses the generic PWM interface, thus it will work on a
|
|
variety of SoCs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pwm-fan.
|
|
|
|
config SENSORS_RASPBERRYPI_HWMON
|
|
tristate "Raspberry Pi voltage monitor"
|
|
depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
|
|
help
|
|
If you say yes here you get support for voltage sensor on the
|
|
Raspberry Pi.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called raspberrypi-hwmon.
|
|
|
|
config SENSORS_SL28CPLD
|
|
tristate "Kontron sl28cpld hardware monitoring driver"
|
|
depends on MFD_SL28CPLD || COMPILE_TEST
|
|
help
|
|
If you say yes here you get support for the fan supervisor of the
|
|
sl28cpld board management controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sl28cpld-hwmon.
|
|
|
|
config SENSORS_SBTSI
|
|
tristate "Emulated SB-TSI temperature sensor"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for emulated temperature
|
|
sensors on AMD SoCs with SB-TSI interface connected to a BMC device.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called sbtsi_temp.
|
|
|
|
config SENSORS_SBRMI
|
|
tristate "Emulated SB-RMI sensor"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for emulated RMI
|
|
sensors on AMD SoCs with APML interface connected to a BMC device.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called sbrmi.
|
|
|
|
config SENSORS_SHT15
|
|
tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
select BITREVERSE
|
|
help
|
|
If you say yes here you get support for the Sensiron SHT10, SHT11,
|
|
SHT15, SHT71, SHT75 humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sht15.
|
|
|
|
config SENSORS_SHT21
|
|
tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Sensiron SHT21, SHT25
|
|
humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sht21.
|
|
|
|
config SENSORS_SHT3x
|
|
tristate "Sensiron humidity and temperature sensors. SHT3x and compat."
|
|
depends on I2C
|
|
select CRC8
|
|
help
|
|
If you say yes here you get support for the Sensiron SHT30 and SHT31
|
|
humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sht3x.
|
|
|
|
config SENSORS_SHT4x
|
|
tristate "Sensiron humidity and temperature sensors. SHT4x and compat."
|
|
depends on I2C
|
|
select CRC8
|
|
help
|
|
If you say yes here you get support for the Sensiron SHT40, SHT41 and
|
|
SHT45 humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sht4x.
|
|
|
|
config SENSORS_SHTC1
|
|
tristate "Sensiron humidity and temperature sensors. SHTC1 and compat."
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Sensiron SHTC1, SHTW1,
|
|
and SHTC3 humidity and temperature sensors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called shtc1.
|
|
|
|
config SENSORS_SIS5595
|
|
tristate "Silicon Integrated Systems Corp. SiS5595"
|
|
depends on PCI
|
|
help
|
|
If you say yes here you get support for the integrated sensors in
|
|
SiS5595 South Bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sis5595.
|
|
|
|
config SENSORS_SY7636A
|
|
tristate "Silergy SY7636A"
|
|
depends on MFD_SY7636A
|
|
help
|
|
If you say yes here you get support for the thermistor readout of
|
|
the Silergy SY7636A PMIC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sy7636a-hwmon.
|
|
|
|
config SENSORS_DME1737
|
|
tristate "SMSC DME1737, SCH311x and compatibles"
|
|
depends on I2C && !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
|
|
Asus A8000 Super-I/O chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called dme1737.
|
|
|
|
config SENSORS_EMC1403
|
|
tristate "SMSC EMC1403/23 thermal sensor"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the SMSC EMC1403/23
|
|
temperature monitoring chip.
|
|
|
|
Threshold values can be configured using sysfs.
|
|
Data from the different diodes are accessible via sysfs.
|
|
|
|
config SENSORS_EMC2103
|
|
tristate "SMSC EMC2103"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
and fan sensors of the SMSC EMC2103 chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called emc2103.
|
|
|
|
config SENSORS_EMC2305
|
|
tristate "Microchip EMC2305 and compatible EMC2301/2/3"
|
|
depends on I2C
|
|
imply THERMAL
|
|
help
|
|
If you say yes here you get support for the Microchip EMC2305
|
|
fan controller chips.
|
|
The Microchip EMC2305 is a fan controller for up to 5 fans.
|
|
Fan rotation speeds are reported in RPM.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called emc2305.
|
|
|
|
config SENSORS_EMC6W201
|
|
tristate "SMSC EMC6W201"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the SMSC EMC6W201
|
|
hardware monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called emc6w201.
|
|
|
|
config SENSORS_SMSC47M1
|
|
tristate "SMSC LPC47M10x and compatibles"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for the integrated fan
|
|
monitoring and control capabilities of the SMSC LPC47B27x,
|
|
LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
|
|
LPC47M192, LPC47M292 and LPC47M997 chips.
|
|
|
|
The temperature and voltage sensor features of the LPC47M15x,
|
|
LPC47M192, LPC47M292 and LPC47M997 are supported by another
|
|
driver, select also "SMSC LPC47M192 and compatibles" below for
|
|
those.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47m1.
|
|
|
|
config SENSORS_SMSC47M192
|
|
tristate "SMSC LPC47M192 and compatibles"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the temperature and
|
|
voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
|
|
and LPC47M997 chips.
|
|
|
|
The fan monitoring and control capabilities of these chips
|
|
are supported by another driver, select
|
|
"SMSC LPC47M10x and compatibles" above. You need both drivers
|
|
if you want fan control and voltage/temperature sensor support.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47m192.
|
|
|
|
config SENSORS_SMSC47B397
|
|
tristate "SMSC LPC47B397-NC"
|
|
depends on !PPC
|
|
help
|
|
If you say yes here you get support for the SMSC LPC47B397-NC
|
|
sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called smsc47b397.
|
|
|
|
config SENSORS_SCH56XX_COMMON
|
|
tristate
|
|
|
|
config SENSORS_SCH5627
|
|
tristate "SMSC SCH5627"
|
|
depends on !PPC && WATCHDOG
|
|
select SENSORS_SCH56XX_COMMON
|
|
select WATCHDOG_CORE
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
features of the SMSC SCH5627 Super-I/O chip including support for
|
|
the integrated watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sch5627.
|
|
|
|
config SENSORS_SCH5636
|
|
tristate "SMSC SCH5636"
|
|
depends on !PPC && WATCHDOG
|
|
select SENSORS_SCH56XX_COMMON
|
|
select WATCHDOG_CORE
|
|
help
|
|
SMSC SCH5636 Super I/O chips include an embedded microcontroller for
|
|
hardware monitoring solutions, allowing motherboard manufacturers to
|
|
create their own custom hwmon solution based upon the SCH5636.
|
|
|
|
Currently this driver only supports the Fujitsu Theseus SCH5636 based
|
|
hwmon solution. Say yes here if you want support for the Fujitsu
|
|
Theseus' hardware monitoring features including support for the
|
|
integrated watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sch5636.
|
|
|
|
config SENSORS_STTS751
|
|
tristate "ST Microelectronics STTS751"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for STTS751
|
|
temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called stts751.
|
|
|
|
config SENSORS_SFCTEMP
|
|
tristate "Starfive JH71x0 temperature sensor"
|
|
depends on ARCH_STARFIVE || COMPILE_TEST
|
|
help
|
|
If you say yes here you get support for temperature sensor
|
|
on the Starfive JH71x0 SoCs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called sfctemp.
|
|
|
|
config SENSORS_SMM665
|
|
tristate "Summit Microelectronics SMM665"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the hardware monitoring
|
|
features of the Summit Microelectronics SMM665/SMM665B Six-Channel
|
|
Active DC Output Controller / Monitor.
|
|
|
|
Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
|
|
Support for those chips is untested.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called smm665.
|
|
|
|
config SENSORS_ADC128D818
|
|
tristate "Texas Instruments ADC128D818"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Texas Instruments
|
|
ADC128D818 System Monitor with Temperature Sensor chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called adc128d818.
|
|
|
|
config SENSORS_ADS7828
|
|
tristate "Texas Instruments ADS7828 and compatibles"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments ADS7828 and
|
|
ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
|
|
it is 8-bit on ADS7830.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ads7828.
|
|
|
|
config SENSORS_ADS7871
|
|
tristate "Texas Instruments ADS7871 A/D converter"
|
|
depends on SPI
|
|
help
|
|
If you say yes here you get support for TI ADS7871 & ADS7870
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ads7871.
|
|
|
|
config SENSORS_AMC6821
|
|
tristate "Texas Instruments AMC6821"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Texas Instruments
|
|
AMC6821 hardware monitoring chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called amc6821.
|
|
|
|
config SENSORS_INA209
|
|
tristate "TI / Burr Brown INA209"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the TI / Burr Brown INA209
|
|
voltage / current / power monitor I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ina209.
|
|
|
|
config SENSORS_INA2XX
|
|
tristate "Texas Instruments INA219 and compatibles"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for INA219, INA220, INA226,
|
|
INA230, and INA231 power monitor chips.
|
|
|
|
The INA2xx driver is configured for the default configuration of
|
|
the part as described in the datasheet.
|
|
Default value for Rshunt is 10 mOhms.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ina2xx.
|
|
|
|
config SENSORS_INA238
|
|
tristate "Texas Instruments INA238"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the INA238 power monitor
|
|
chip. This driver supports voltage, current, power and temperature
|
|
measurements as well as alarm configuration.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ina238.
|
|
|
|
config SENSORS_INA3221
|
|
tristate "Texas Instruments INA3221 Triple Power Monitor"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the TI INA3221 Triple Power
|
|
Monitor.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called ina3221.
|
|
|
|
config SENSORS_TC74
|
|
tristate "Microchip TC74"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Microchip TC74 single
|
|
input temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tc74.
|
|
|
|
config SENSORS_THMC50
|
|
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments THMC50
|
|
sensor chips and clones: the Analog Devices ADM1022.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called thmc50.
|
|
|
|
config SENSORS_TMP102
|
|
tristate "Texas Instruments TMP102"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP102
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp102.
|
|
|
|
config SENSORS_TMP103
|
|
tristate "Texas Instruments TMP103"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP103
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp103.
|
|
|
|
config SENSORS_TMP108
|
|
tristate "Texas Instruments TMP108"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP108
|
|
sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp108.
|
|
|
|
config SENSORS_TMP401
|
|
tristate "Texas Instruments TMP401 and compatibles"
|
|
depends on I2C
|
|
select REGMAP
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP401,
|
|
TMP411, TMP431, TMP432, and TMP435 temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp401.
|
|
|
|
config SENSORS_TMP421
|
|
tristate "Texas Instruments TMP421 and compatible"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP421,
|
|
TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp421.
|
|
|
|
config SENSORS_TMP464
|
|
tristate "Texas Instruments TMP464 and compatible"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP464
|
|
and TMP468 temperature sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp464.
|
|
|
|
config SENSORS_TMP513
|
|
tristate "Texas Instruments TMP513 and compatibles"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for Texas Instruments TMP512,
|
|
and TMP513 temperature and power supply sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called tmp513.
|
|
|
|
config SENSORS_VEXPRESS
|
|
tristate "Versatile Express"
|
|
depends on VEXPRESS_CONFIG
|
|
help
|
|
This driver provides support for hardware sensors available on
|
|
the ARM Ltd's Versatile Express platform. It can provide wide
|
|
range of information like temperature, power, energy.
|
|
|
|
config SENSORS_VIA_CPUTEMP
|
|
tristate "VIA CPU temperature sensor"
|
|
depends on X86
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
sensor inside your CPU. Supported are all known variants of
|
|
the VIA C7 and Nano.
|
|
|
|
config SENSORS_VIA686A
|
|
tristate "VIA686A"
|
|
depends on PCI
|
|
help
|
|
If you say yes here you get support for the integrated sensors in
|
|
Via 686A/B South Bridges.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called via686a.
|
|
|
|
config SENSORS_VT1211
|
|
tristate "VIA VT1211"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here then you get support for hardware monitoring
|
|
features of the VIA VT1211 Super-I/O chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called vt1211.
|
|
|
|
config SENSORS_VT8231
|
|
tristate "VIA VT8231"
|
|
depends on PCI
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here then you get support for the integrated sensors
|
|
in the VIA VT8231 device.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called vt8231.
|
|
|
|
config SENSORS_W83773G
|
|
tristate "Nuvoton W83773G"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
If you say yes here you get support for the Nuvoton W83773G hardware
|
|
monitoring chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83773g.
|
|
|
|
config SENSORS_W83781D
|
|
tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W8378x series
|
|
of sensor chips: the W83781D, W83782D and W83783S, and the similar
|
|
Asus AS99127F.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83781d.
|
|
|
|
config SENSORS_W83791D
|
|
tristate "Winbond W83791D"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W83791D chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83791d.
|
|
|
|
config SENSORS_W83792D
|
|
tristate "Winbond W83792D"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Winbond W83792D chip.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83792d.
|
|
|
|
config SENSORS_W83793
|
|
tristate "Winbond W83793"
|
|
depends on I2C
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W83793
|
|
hardware monitoring chip, including support for the integrated
|
|
watchdog.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83793.
|
|
|
|
config SENSORS_W83795
|
|
tristate "Winbond/Nuvoton W83795G/ADG"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Winbond W83795G and
|
|
W83795ADG hardware monitoring chip, including manual fan speed
|
|
control.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83795.
|
|
|
|
config SENSORS_W83795_FANCTRL
|
|
bool "Include automatic fan control support"
|
|
depends on SENSORS_W83795
|
|
help
|
|
If you say yes here, support for automatic fan speed control
|
|
will be included in the driver.
|
|
|
|
Please also note that this option will create sysfs attribute
|
|
files which may change in the future, so you shouldn't rely
|
|
on them being stable.
|
|
|
|
config SENSORS_W83L785TS
|
|
tristate "Winbond W83L785TS-S"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Winbond W83L785TS-S
|
|
sensor chip, which is used on the Asus A7N8X, among other
|
|
motherboards.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83l785ts.
|
|
|
|
config SENSORS_W83L786NG
|
|
tristate "Winbond W83L786NG, W83L786NR"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the Winbond W83L786NG
|
|
and W83L786NR sensor chips.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83l786ng.
|
|
|
|
config SENSORS_W83627HF
|
|
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the Winbond W836X7 series
|
|
of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
|
|
W83697HF.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83627hf.
|
|
|
|
config SENSORS_W83627EHF
|
|
tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
|
|
depends on !PPC
|
|
select HWMON_VID
|
|
help
|
|
If you say yes here you get support for the hardware
|
|
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
|
|
|
|
This driver also supports the W83627EHG, which is the lead-free
|
|
version of the W83627EHF, and the W83627DHG, which is a similar
|
|
chip suited for specific Intel processors that use PECI such as
|
|
the Core 2 Duo. And also the W83627UHG, which is a stripped down
|
|
version of the W83627DHG (as far as hardware monitoring goes.)
|
|
|
|
This driver also supports Nuvoton W83667HG and W83667HG-B.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called w83627ehf.
|
|
|
|
config SENSORS_WM831X
|
|
tristate "WM831x PMICs"
|
|
depends on MFD_WM831X
|
|
help
|
|
If you say yes here you get support for the hardware
|
|
monitoring functionality of the Wolfson Microelectronics
|
|
WM831x series of PMICs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called wm831x-hwmon.
|
|
|
|
config SENSORS_WM8350
|
|
tristate "Wolfson Microelectronics WM835x"
|
|
depends on MFD_WM8350
|
|
help
|
|
If you say yes here you get support for the hardware
|
|
monitoring features of the WM835x series of PMICs.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called wm8350-hwmon.
|
|
|
|
config SENSORS_ULTRA45
|
|
tristate "Sun Ultra45 PIC16F747"
|
|
depends on SPARC64
|
|
help
|
|
This driver provides support for the Ultra45 workstation environmental
|
|
sensors.
|
|
|
|
config SENSORS_XGENE
|
|
tristate "APM X-Gene SoC hardware monitoring driver"
|
|
depends on XGENE_SLIMPRO_MBOX || PCC
|
|
help
|
|
If you say yes here you get support for the temperature
|
|
and power sensors for APM X-Gene SoC.
|
|
|
|
config SENSORS_INTEL_M10_BMC_HWMON
|
|
tristate "Intel MAX10 BMC Hardware Monitoring"
|
|
depends on MFD_INTEL_M10_BMC_CORE
|
|
help
|
|
This driver provides support for the hardware monitoring functionality
|
|
on Intel MAX10 BMC chip.
|
|
|
|
This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its
|
|
sensors monitor various telemetry data of different components on the
|
|
card, e.g. board temperature, FPGA core temperature/voltage/current.
|
|
|
|
if ACPI
|
|
|
|
comment "ACPI drivers"
|
|
|
|
config SENSORS_ACPI_POWER
|
|
tristate "ACPI 4.0 power meter"
|
|
help
|
|
This driver exposes ACPI 4.0 power meters as hardware monitoring
|
|
devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
|
|
and a power meter.
|
|
|
|
To compile this driver as a module, choose M here:
|
|
the module will be called acpi_power_meter.
|
|
|
|
config SENSORS_ATK0110
|
|
tristate "ASUS ATK0110"
|
|
depends on X86
|
|
help
|
|
If you say yes here you get support for the ACPI hardware
|
|
monitoring interface found in many ASUS motherboards. This
|
|
driver will provide readings of fans, voltages and temperatures
|
|
through the system firmware.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asus_atk0110.
|
|
|
|
config SENSORS_ASUS_WMI
|
|
tristate "ASUS WMI X370/X470/B450/X399"
|
|
depends on ACPI_WMI
|
|
help
|
|
If you say yes here you get support for the ACPI hardware monitoring
|
|
interface found in X370/X470/B450/X399 ASUS motherboards. This driver
|
|
will provide readings of fans, voltages and temperatures through the system
|
|
firmware.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asus_wmi_sensors.
|
|
|
|
config SENSORS_ASUS_EC
|
|
tristate "ASUS EC Sensors"
|
|
depends on X86
|
|
help
|
|
If you say yes here you get support for the ACPI embedded controller
|
|
hardware monitoring interface found in ASUS motherboards. The driver
|
|
currently supports B550/X570 boards, although other ASUS boards might
|
|
provide this monitoring interface as well.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called asus_ec_sensors.
|
|
|
|
config SENSORS_HP_WMI
|
|
tristate "HP WMI Sensors"
|
|
depends on ACPI_WMI
|
|
help
|
|
If you say yes here you get support for the ACPI hardware monitoring
|
|
interface found in HP (and some HP Compaq) business-class computers.
|
|
Available sensors vary between systems. Temperature and fan speed
|
|
sensors are the most common.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called hp_wmi_sensors.
|
|
|
|
endif # ACPI
|
|
|
|
endif # HWMON
|