mirror of
https://github.com/torvalds/linux.git
synced 2024-12-15 15:41:58 +00:00
93fff4ce19
When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
213 lines
3.7 KiB
Plaintext
213 lines
3.7 KiB
Plaintext
/dts-v1/;
|
|
|
|
/include/ "kirkwood.dtsi"
|
|
/include/ "kirkwood-6282.dtsi"
|
|
|
|
/ {
|
|
model = "Plat'Home OpenBlocksA6";
|
|
compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x20000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
|
};
|
|
|
|
ocp@f1000000 {
|
|
serial@12000 {
|
|
status = "ok";
|
|
};
|
|
|
|
serial@12100 {
|
|
status = "ok";
|
|
};
|
|
|
|
nand@3000000 {
|
|
chip-delay = <25>;
|
|
status = "okay";
|
|
|
|
partition@0 {
|
|
label = "uboot";
|
|
reg = <0x0 0x90000>;
|
|
};
|
|
|
|
partition@90000 {
|
|
label = "env";
|
|
reg = <0x90000 0x44000>;
|
|
};
|
|
|
|
partition@d4000 {
|
|
label = "test";
|
|
reg = <0xd4000 0x24000>;
|
|
};
|
|
|
|
partition@f4000 {
|
|
label = "conf";
|
|
reg = <0xf4000 0x400000>;
|
|
};
|
|
|
|
partition@4f4000 {
|
|
label = "linux";
|
|
reg = <0x4f4000 0x1d20000>;
|
|
};
|
|
|
|
partition@2214000 {
|
|
label = "user";
|
|
reg = <0x2214000 0x1dec000>;
|
|
};
|
|
};
|
|
|
|
sata@80000 {
|
|
nr-ports = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
i2c@11100 {
|
|
status = "okay";
|
|
|
|
s35390a: s35390a@30 {
|
|
compatible = "s35390a";
|
|
reg = <0x30>;
|
|
};
|
|
};
|
|
|
|
pinctrl: pinctrl@10000 {
|
|
pinctrl-0 = < &pmx_nand &pmx_uart0
|
|
&pmx_uart1 &pmx_twsi1
|
|
&pmx_dip_sw0 &pmx_dip_sw1
|
|
&pmx_dip_sw2 &pmx_dip_sw3
|
|
&pmx_gpio_0 &pmx_gpio_1
|
|
&pmx_gpio_2 &pmx_gpio_3
|
|
&pmx_gpio_4 &pmx_gpio_5
|
|
&pmx_gpio_6 &pmx_gpio_7
|
|
&pmx_led_red &pmx_led_green
|
|
&pmx_led_yellow >;
|
|
pinctrl-names = "default";
|
|
|
|
pmx_uart0: pmx-uart0 {
|
|
marvell,pins = "mpp10", "mpp11", "mpp15",
|
|
"mpp16";
|
|
marvell,function = "uart0";
|
|
};
|
|
|
|
pmx_uart1: pmx-uart1 {
|
|
marvell,pins = "mpp13", "mpp14", "mpp8",
|
|
"mpp9";
|
|
marvell,function = "uart1";
|
|
};
|
|
|
|
pmx_sysrst: pmx-sysrst {
|
|
marvell,pins = "mpp6";
|
|
marvell,function = "sysrst";
|
|
};
|
|
|
|
pmx_dip_sw0: pmx-dip-sw0 {
|
|
marvell,pins = "mpp20";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_dip_sw1: pmx-dip-sw1 {
|
|
marvell,pins = "mpp21";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_dip_sw2: pmx-dip-sw2 {
|
|
marvell,pins = "mpp22";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_dip_sw3: pmx-dip-sw3 {
|
|
marvell,pins = "mpp23";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_0: pmx-gpio-0 {
|
|
marvell,pins = "mpp24";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_1: pmx-gpio-1 {
|
|
marvell,pins = "mpp25";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_2: pmx-gpio-2 {
|
|
marvell,pins = "mpp26";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_3: pmx-gpio-3 {
|
|
marvell,pins = "mpp27";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_4: pmx-gpio-4 {
|
|
marvell,pins = "mpp28";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_5: pmx-gpio-5 {
|
|
marvell,pins = "mpp29";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_6: pmx-gpio-6 {
|
|
marvell,pins = "mpp30";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_7: pmx-gpio-7 {
|
|
marvell,pins = "mpp31";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_gpio_init: pmx-init {
|
|
marvell,pins = "mpp38";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_usb_oc: pmx-usb-oc {
|
|
marvell,pins = "mpp39";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_red: pmx-led-red {
|
|
marvell,pins = "mpp41";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_green: pmx-led-green {
|
|
marvell,pins = "mpp42";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_led_yellow: pmx-led-yellow {
|
|
marvell,pins = "mpp43";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-red {
|
|
label = "obsa6:red:stat";
|
|
gpios = <&gpio1 9 1>;
|
|
};
|
|
|
|
led-green {
|
|
label = "obsa6:green:stat";
|
|
gpios = <&gpio1 10 1>;
|
|
};
|
|
|
|
led-yellow {
|
|
label = "obsa6:yellow:stat";
|
|
gpios = <&gpio1 11 1>;
|
|
};
|
|
};
|
|
};
|