mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 20:51:44 +00:00
e190a0c389
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alain Volmat <alain.volmat@foss.st.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Jochen Friedrich <jochen@scram.de> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Asmaa Mnebhi <asnaa@nvidia.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Chris Pringle <chris.pringle@phabrix.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Tali Perry <tali.perry@nuvoton.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
658 lines
17 KiB
C
658 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2012 FUJITSU SEMICONDUCTOR LIMITED
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define WAIT_PCLK(n, rate) \
|
|
ndelay(DIV_ROUND_UP(DIV_ROUND_UP(1000000000, rate), n) + 10)
|
|
|
|
/* I2C register address definitions */
|
|
#define SYNQUACER_I2C_REG_BSR (0x00 << 2) // Bus Status
|
|
#define SYNQUACER_I2C_REG_BCR (0x01 << 2) // Bus Control
|
|
#define SYNQUACER_I2C_REG_CCR (0x02 << 2) // Clock Control
|
|
#define SYNQUACER_I2C_REG_ADR (0x03 << 2) // Address
|
|
#define SYNQUACER_I2C_REG_DAR (0x04 << 2) // Data
|
|
#define SYNQUACER_I2C_REG_CSR (0x05 << 2) // Expansion CS
|
|
#define SYNQUACER_I2C_REG_FSR (0x06 << 2) // Bus Clock Freq
|
|
#define SYNQUACER_I2C_REG_BC2R (0x07 << 2) // Bus Control 2
|
|
|
|
/* I2C register bit definitions */
|
|
#define SYNQUACER_I2C_BSR_FBT BIT(0) // First Byte Transfer
|
|
#define SYNQUACER_I2C_BSR_GCA BIT(1) // General Call Address
|
|
#define SYNQUACER_I2C_BSR_AAS BIT(2) // Address as Slave
|
|
#define SYNQUACER_I2C_BSR_TRX BIT(3) // Transfer/Receive
|
|
#define SYNQUACER_I2C_BSR_LRB BIT(4) // Last Received Bit
|
|
#define SYNQUACER_I2C_BSR_AL BIT(5) // Arbitration Lost
|
|
#define SYNQUACER_I2C_BSR_RSC BIT(6) // Repeated Start Cond.
|
|
#define SYNQUACER_I2C_BSR_BB BIT(7) // Bus Busy
|
|
|
|
#define SYNQUACER_I2C_BCR_INT BIT(0) // Interrupt
|
|
#define SYNQUACER_I2C_BCR_INTE BIT(1) // Interrupt Enable
|
|
#define SYNQUACER_I2C_BCR_GCAA BIT(2) // Gen. Call Access Ack.
|
|
#define SYNQUACER_I2C_BCR_ACK BIT(3) // Acknowledge
|
|
#define SYNQUACER_I2C_BCR_MSS BIT(4) // Master Slave Select
|
|
#define SYNQUACER_I2C_BCR_SCC BIT(5) // Start Condition Cont.
|
|
#define SYNQUACER_I2C_BCR_BEIE BIT(6) // Bus Error Int Enable
|
|
#define SYNQUACER_I2C_BCR_BER BIT(7) // Bus Error
|
|
|
|
#define SYNQUACER_I2C_CCR_CS_MASK (0x1f) // CCR Clock Period Sel.
|
|
#define SYNQUACER_I2C_CCR_EN BIT(5) // Enable
|
|
#define SYNQUACER_I2C_CCR_FM BIT(6) // Speed Mode Select
|
|
|
|
#define SYNQUACER_I2C_CSR_CS_MASK (0x3f) // CSR Clock Period Sel.
|
|
|
|
#define SYNQUACER_I2C_BC2R_SCLL BIT(0) // SCL Low Drive
|
|
#define SYNQUACER_I2C_BC2R_SDAL BIT(1) // SDA Low Drive
|
|
#define SYNQUACER_I2C_BC2R_SCLS BIT(4) // SCL Status
|
|
#define SYNQUACER_I2C_BC2R_SDAS BIT(5) // SDA Status
|
|
|
|
/* PCLK frequency */
|
|
#define SYNQUACER_I2C_BUS_CLK_FR(rate) (((rate) / 20000000) + 1)
|
|
|
|
/* STANDARD MODE frequency */
|
|
#define SYNQUACER_I2C_CLK_MASTER_STD(rate) \
|
|
DIV_ROUND_UP(DIV_ROUND_UP((rate), I2C_MAX_STANDARD_MODE_FREQ) - 2, 2)
|
|
/* FAST MODE frequency */
|
|
#define SYNQUACER_I2C_CLK_MASTER_FAST(rate) \
|
|
DIV_ROUND_UP((DIV_ROUND_UP((rate), I2C_MAX_FAST_MODE_FREQ) - 2) * 2, 3)
|
|
|
|
/* (clkrate <= 18000000) */
|
|
/* calculate the value of CS bits in CCR register on standard mode */
|
|
#define SYNQUACER_I2C_CCR_CS_STD_MAX_18M(rate) \
|
|
((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 65) \
|
|
& SYNQUACER_I2C_CCR_CS_MASK)
|
|
|
|
/* calculate the value of CS bits in CSR register on standard mode */
|
|
#define SYNQUACER_I2C_CSR_CS_STD_MAX_18M(rate) 0x00
|
|
|
|
/* calculate the value of CS bits in CCR register on fast mode */
|
|
#define SYNQUACER_I2C_CCR_CS_FAST_MAX_18M(rate) \
|
|
((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) \
|
|
& SYNQUACER_I2C_CCR_CS_MASK)
|
|
|
|
/* calculate the value of CS bits in CSR register on fast mode */
|
|
#define SYNQUACER_I2C_CSR_CS_FAST_MAX_18M(rate) 0x00
|
|
|
|
/* (clkrate > 18000000) */
|
|
/* calculate the value of CS bits in CCR register on standard mode */
|
|
#define SYNQUACER_I2C_CCR_CS_STD_MIN_18M(rate) \
|
|
((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 1) \
|
|
& SYNQUACER_I2C_CCR_CS_MASK)
|
|
|
|
/* calculate the value of CS bits in CSR register on standard mode */
|
|
#define SYNQUACER_I2C_CSR_CS_STD_MIN_18M(rate) \
|
|
(((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 1) >> 5) \
|
|
& SYNQUACER_I2C_CSR_CS_MASK)
|
|
|
|
/* calculate the value of CS bits in CCR register on fast mode */
|
|
#define SYNQUACER_I2C_CCR_CS_FAST_MIN_18M(rate) \
|
|
((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) \
|
|
& SYNQUACER_I2C_CCR_CS_MASK)
|
|
|
|
/* calculate the value of CS bits in CSR register on fast mode */
|
|
#define SYNQUACER_I2C_CSR_CS_FAST_MIN_18M(rate) \
|
|
(((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) >> 5) \
|
|
& SYNQUACER_I2C_CSR_CS_MASK)
|
|
|
|
/* min I2C clock frequency 14M */
|
|
#define SYNQUACER_I2C_MIN_CLK_RATE (14 * 1000000)
|
|
/* max I2C clock frequency 200M */
|
|
#define SYNQUACER_I2C_MAX_CLK_RATE (200 * 1000000)
|
|
/* I2C clock frequency 18M */
|
|
#define SYNQUACER_I2C_CLK_RATE_18M (18 * 1000000)
|
|
|
|
#define SYNQUACER_I2C_SPEED_FM 400 // Fast Mode
|
|
#define SYNQUACER_I2C_SPEED_SM 100 // Standard Mode
|
|
|
|
enum i2c_state {
|
|
STATE_IDLE,
|
|
STATE_START,
|
|
STATE_READ,
|
|
STATE_WRITE
|
|
};
|
|
|
|
struct synquacer_i2c {
|
|
struct completion completion;
|
|
|
|
struct i2c_msg *msg;
|
|
u32 msg_num;
|
|
u32 msg_idx;
|
|
u32 msg_ptr;
|
|
|
|
int irq;
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct clk *pclk;
|
|
u32 pclkrate;
|
|
u32 speed_khz;
|
|
u32 timeout_ms;
|
|
enum i2c_state state;
|
|
struct i2c_adapter adapter;
|
|
};
|
|
|
|
static inline int is_lastmsg(struct synquacer_i2c *i2c)
|
|
{
|
|
return i2c->msg_idx >= (i2c->msg_num - 1);
|
|
}
|
|
|
|
static inline int is_msglast(struct synquacer_i2c *i2c)
|
|
{
|
|
return i2c->msg_ptr == (i2c->msg->len - 1);
|
|
}
|
|
|
|
static inline int is_msgend(struct synquacer_i2c *i2c)
|
|
{
|
|
return i2c->msg_ptr >= i2c->msg->len;
|
|
}
|
|
|
|
static inline unsigned long calc_timeout_ms(struct synquacer_i2c *i2c,
|
|
struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
unsigned long bit_count = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < num; i++, msgs++)
|
|
bit_count += msgs->len;
|
|
|
|
return DIV_ROUND_UP((bit_count * 9 + num * 10) * 3, 200) + 10;
|
|
}
|
|
|
|
static void synquacer_i2c_stop(struct synquacer_i2c *i2c, int ret)
|
|
{
|
|
/*
|
|
* clear IRQ (INT=0, BER=0)
|
|
* set Stop Condition (MSS=0)
|
|
* Interrupt Disable
|
|
*/
|
|
writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR);
|
|
|
|
i2c->state = STATE_IDLE;
|
|
|
|
i2c->msg_ptr = 0;
|
|
i2c->msg = NULL;
|
|
i2c->msg_idx++;
|
|
i2c->msg_num = 0;
|
|
if (ret)
|
|
i2c->msg_idx = ret;
|
|
|
|
complete(&i2c->completion);
|
|
}
|
|
|
|
static void synquacer_i2c_hw_init(struct synquacer_i2c *i2c)
|
|
{
|
|
unsigned char ccr_cs, csr_cs;
|
|
u32 rt = i2c->pclkrate;
|
|
|
|
/* Set own Address */
|
|
writeb(0, i2c->base + SYNQUACER_I2C_REG_ADR);
|
|
|
|
/* Set PCLK frequency */
|
|
writeb(SYNQUACER_I2C_BUS_CLK_FR(i2c->pclkrate),
|
|
i2c->base + SYNQUACER_I2C_REG_FSR);
|
|
|
|
switch (i2c->speed_khz) {
|
|
case SYNQUACER_I2C_SPEED_FM:
|
|
if (i2c->pclkrate <= SYNQUACER_I2C_CLK_RATE_18M) {
|
|
ccr_cs = SYNQUACER_I2C_CCR_CS_FAST_MAX_18M(rt);
|
|
csr_cs = SYNQUACER_I2C_CSR_CS_FAST_MAX_18M(rt);
|
|
} else {
|
|
ccr_cs = SYNQUACER_I2C_CCR_CS_FAST_MIN_18M(rt);
|
|
csr_cs = SYNQUACER_I2C_CSR_CS_FAST_MIN_18M(rt);
|
|
}
|
|
|
|
/* Set Clock and enable, Set fast mode */
|
|
writeb(ccr_cs | SYNQUACER_I2C_CCR_FM |
|
|
SYNQUACER_I2C_CCR_EN,
|
|
i2c->base + SYNQUACER_I2C_REG_CCR);
|
|
writeb(csr_cs, i2c->base + SYNQUACER_I2C_REG_CSR);
|
|
break;
|
|
case SYNQUACER_I2C_SPEED_SM:
|
|
if (i2c->pclkrate <= SYNQUACER_I2C_CLK_RATE_18M) {
|
|
ccr_cs = SYNQUACER_I2C_CCR_CS_STD_MAX_18M(rt);
|
|
csr_cs = SYNQUACER_I2C_CSR_CS_STD_MAX_18M(rt);
|
|
} else {
|
|
ccr_cs = SYNQUACER_I2C_CCR_CS_STD_MIN_18M(rt);
|
|
csr_cs = SYNQUACER_I2C_CSR_CS_STD_MIN_18M(rt);
|
|
}
|
|
|
|
/* Set Clock and enable, Set standard mode */
|
|
writeb(ccr_cs | SYNQUACER_I2C_CCR_EN,
|
|
i2c->base + SYNQUACER_I2C_REG_CCR);
|
|
writeb(csr_cs, i2c->base + SYNQUACER_I2C_REG_CSR);
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
}
|
|
|
|
/* clear IRQ (INT=0, BER=0), Interrupt Disable */
|
|
writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR);
|
|
writeb(0, i2c->base + SYNQUACER_I2C_REG_BC2R);
|
|
}
|
|
|
|
static void synquacer_i2c_hw_reset(struct synquacer_i2c *i2c)
|
|
{
|
|
/* Disable clock */
|
|
writeb(0, i2c->base + SYNQUACER_I2C_REG_CCR);
|
|
writeb(0, i2c->base + SYNQUACER_I2C_REG_CSR);
|
|
|
|
WAIT_PCLK(100, i2c->pclkrate);
|
|
}
|
|
|
|
static int synquacer_i2c_master_start(struct synquacer_i2c *i2c,
|
|
struct i2c_msg *pmsg)
|
|
{
|
|
unsigned char bsr, bcr;
|
|
|
|
writeb(i2c_8bit_addr_from_msg(pmsg), i2c->base + SYNQUACER_I2C_REG_DAR);
|
|
|
|
dev_dbg(i2c->dev, "slave:0x%02x\n", pmsg->addr);
|
|
|
|
/* Generate Start Condition */
|
|
bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
|
|
bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR);
|
|
dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr);
|
|
|
|
if ((bsr & SYNQUACER_I2C_BSR_BB) &&
|
|
!(bcr & SYNQUACER_I2C_BCR_MSS)) {
|
|
dev_dbg(i2c->dev, "bus is busy");
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (bsr & SYNQUACER_I2C_BSR_BB) { /* Bus is busy */
|
|
dev_dbg(i2c->dev, "Continuous Start");
|
|
writeb(bcr | SYNQUACER_I2C_BCR_SCC,
|
|
i2c->base + SYNQUACER_I2C_REG_BCR);
|
|
} else {
|
|
if (bcr & SYNQUACER_I2C_BCR_MSS) {
|
|
dev_dbg(i2c->dev, "not in master mode");
|
|
return -EAGAIN;
|
|
}
|
|
dev_dbg(i2c->dev, "Start Condition");
|
|
/* Start Condition + Enable Interrupts */
|
|
writeb(bcr | SYNQUACER_I2C_BCR_MSS |
|
|
SYNQUACER_I2C_BCR_INTE | SYNQUACER_I2C_BCR_BEIE,
|
|
i2c->base + SYNQUACER_I2C_REG_BCR);
|
|
}
|
|
|
|
WAIT_PCLK(10, i2c->pclkrate);
|
|
|
|
/* get BSR & BCR registers */
|
|
bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
|
|
bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR);
|
|
dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr);
|
|
|
|
if ((bsr & SYNQUACER_I2C_BSR_AL) ||
|
|
!(bcr & SYNQUACER_I2C_BCR_MSS)) {
|
|
dev_dbg(i2c->dev, "arbitration lost\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int synquacer_i2c_doxfer(struct synquacer_i2c *i2c,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
unsigned char bsr;
|
|
unsigned long timeout;
|
|
int ret;
|
|
|
|
synquacer_i2c_hw_init(i2c);
|
|
bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
|
|
if (bsr & SYNQUACER_I2C_BSR_BB) {
|
|
dev_err(i2c->dev, "cannot get bus (bus busy)\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
reinit_completion(&i2c->completion);
|
|
|
|
i2c->msg = msgs;
|
|
i2c->msg_num = num;
|
|
i2c->msg_ptr = 0;
|
|
i2c->msg_idx = 0;
|
|
i2c->state = STATE_START;
|
|
|
|
ret = synquacer_i2c_master_start(i2c, i2c->msg);
|
|
if (ret < 0) {
|
|
dev_dbg(i2c->dev, "Address failed: (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
timeout = wait_for_completion_timeout(&i2c->completion,
|
|
msecs_to_jiffies(i2c->timeout_ms));
|
|
if (timeout == 0) {
|
|
dev_dbg(i2c->dev, "timeout\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
ret = i2c->msg_idx;
|
|
if (ret != num) {
|
|
dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* wait 2 clock periods to ensure the stop has been through the bus */
|
|
udelay(DIV_ROUND_UP(2 * 1000, i2c->speed_khz));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t synquacer_i2c_isr(int irq, void *dev_id)
|
|
{
|
|
struct synquacer_i2c *i2c = dev_id;
|
|
|
|
unsigned char byte;
|
|
unsigned char bsr, bcr;
|
|
int ret;
|
|
|
|
bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR);
|
|
bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
|
|
dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr);
|
|
|
|
if (bcr & SYNQUACER_I2C_BCR_BER) {
|
|
dev_err(i2c->dev, "bus error\n");
|
|
synquacer_i2c_stop(i2c, -EAGAIN);
|
|
goto out;
|
|
}
|
|
if ((bsr & SYNQUACER_I2C_BSR_AL) ||
|
|
!(bcr & SYNQUACER_I2C_BCR_MSS)) {
|
|
dev_dbg(i2c->dev, "arbitration lost\n");
|
|
synquacer_i2c_stop(i2c, -EAGAIN);
|
|
goto out;
|
|
}
|
|
|
|
switch (i2c->state) {
|
|
case STATE_START:
|
|
if (bsr & SYNQUACER_I2C_BSR_LRB) {
|
|
dev_dbg(i2c->dev, "ack was not received\n");
|
|
synquacer_i2c_stop(i2c, -EAGAIN);
|
|
goto out;
|
|
}
|
|
|
|
if (i2c->msg->flags & I2C_M_RD)
|
|
i2c->state = STATE_READ;
|
|
else
|
|
i2c->state = STATE_WRITE;
|
|
|
|
if (is_lastmsg(i2c) && i2c->msg->len == 0) {
|
|
synquacer_i2c_stop(i2c, 0);
|
|
goto out;
|
|
}
|
|
|
|
if (i2c->state == STATE_READ)
|
|
goto prepare_read;
|
|
fallthrough;
|
|
|
|
case STATE_WRITE:
|
|
if (bsr & SYNQUACER_I2C_BSR_LRB) {
|
|
dev_dbg(i2c->dev, "WRITE: No Ack\n");
|
|
synquacer_i2c_stop(i2c, -EAGAIN);
|
|
goto out;
|
|
}
|
|
|
|
if (!is_msgend(i2c)) {
|
|
writeb(i2c->msg->buf[i2c->msg_ptr++],
|
|
i2c->base + SYNQUACER_I2C_REG_DAR);
|
|
|
|
/* clear IRQ, and continue */
|
|
writeb(SYNQUACER_I2C_BCR_BEIE |
|
|
SYNQUACER_I2C_BCR_MSS |
|
|
SYNQUACER_I2C_BCR_INTE,
|
|
i2c->base + SYNQUACER_I2C_REG_BCR);
|
|
break;
|
|
}
|
|
if (is_lastmsg(i2c)) {
|
|
synquacer_i2c_stop(i2c, 0);
|
|
break;
|
|
}
|
|
dev_dbg(i2c->dev, "WRITE: Next Message\n");
|
|
|
|
i2c->msg_ptr = 0;
|
|
i2c->msg_idx++;
|
|
i2c->msg++;
|
|
|
|
/* send the new start */
|
|
ret = synquacer_i2c_master_start(i2c, i2c->msg);
|
|
if (ret < 0) {
|
|
dev_dbg(i2c->dev, "restart error (%d)\n", ret);
|
|
synquacer_i2c_stop(i2c, -EAGAIN);
|
|
break;
|
|
}
|
|
i2c->state = STATE_START;
|
|
break;
|
|
|
|
case STATE_READ:
|
|
byte = readb(i2c->base + SYNQUACER_I2C_REG_DAR);
|
|
if (!(bsr & SYNQUACER_I2C_BSR_FBT)) /* data */
|
|
i2c->msg->buf[i2c->msg_ptr++] = byte;
|
|
else /* address */
|
|
dev_dbg(i2c->dev, "address:0x%02x. ignore it.\n", byte);
|
|
|
|
prepare_read:
|
|
if (is_msglast(i2c)) {
|
|
writeb(SYNQUACER_I2C_BCR_MSS |
|
|
SYNQUACER_I2C_BCR_BEIE |
|
|
SYNQUACER_I2C_BCR_INTE,
|
|
i2c->base + SYNQUACER_I2C_REG_BCR);
|
|
break;
|
|
}
|
|
if (!is_msgend(i2c)) {
|
|
writeb(SYNQUACER_I2C_BCR_MSS |
|
|
SYNQUACER_I2C_BCR_BEIE |
|
|
SYNQUACER_I2C_BCR_INTE |
|
|
SYNQUACER_I2C_BCR_ACK,
|
|
i2c->base + SYNQUACER_I2C_REG_BCR);
|
|
break;
|
|
}
|
|
if (is_lastmsg(i2c)) {
|
|
/* last message, send stop and complete */
|
|
dev_dbg(i2c->dev, "READ: Send Stop\n");
|
|
synquacer_i2c_stop(i2c, 0);
|
|
break;
|
|
}
|
|
dev_dbg(i2c->dev, "READ: Next Transfer\n");
|
|
|
|
i2c->msg_ptr = 0;
|
|
i2c->msg_idx++;
|
|
i2c->msg++;
|
|
|
|
ret = synquacer_i2c_master_start(i2c, i2c->msg);
|
|
if (ret < 0) {
|
|
dev_dbg(i2c->dev, "restart error (%d)\n", ret);
|
|
synquacer_i2c_stop(i2c, -EAGAIN);
|
|
} else {
|
|
i2c->state = STATE_START;
|
|
}
|
|
break;
|
|
default:
|
|
dev_err(i2c->dev, "called in err STATE (%d)\n", i2c->state);
|
|
break;
|
|
}
|
|
|
|
out:
|
|
WAIT_PCLK(10, i2c->pclkrate);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int synquacer_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct synquacer_i2c *i2c;
|
|
int retry;
|
|
int ret;
|
|
|
|
i2c = i2c_get_adapdata(adap);
|
|
i2c->timeout_ms = calc_timeout_ms(i2c, msgs, num);
|
|
|
|
dev_dbg(i2c->dev, "calculated timeout %d ms\n", i2c->timeout_ms);
|
|
|
|
for (retry = 0; retry <= adap->retries; retry++) {
|
|
ret = synquacer_i2c_doxfer(i2c, msgs, num);
|
|
if (ret != -EAGAIN)
|
|
return ret;
|
|
|
|
dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
|
|
|
|
synquacer_i2c_hw_reset(i2c);
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
static u32 synquacer_i2c_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm synquacer_i2c_algo = {
|
|
.master_xfer = synquacer_i2c_xfer,
|
|
.functionality = synquacer_i2c_functionality,
|
|
};
|
|
|
|
static const struct i2c_adapter synquacer_i2c_ops = {
|
|
.owner = THIS_MODULE,
|
|
.name = "synquacer_i2c-adapter",
|
|
.algo = &synquacer_i2c_algo,
|
|
.retries = 5,
|
|
};
|
|
|
|
static int synquacer_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct synquacer_i2c *i2c;
|
|
u32 bus_speed;
|
|
int ret;
|
|
|
|
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
bus_speed = i2c_acpi_find_bus_speed(&pdev->dev);
|
|
if (!bus_speed)
|
|
device_property_read_u32(&pdev->dev, "clock-frequency",
|
|
&bus_speed);
|
|
|
|
device_property_read_u32(&pdev->dev, "socionext,pclk-rate",
|
|
&i2c->pclkrate);
|
|
|
|
i2c->pclk = devm_clk_get(&pdev->dev, "pclk");
|
|
if (PTR_ERR(i2c->pclk) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
if (!IS_ERR_OR_NULL(i2c->pclk)) {
|
|
dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk);
|
|
|
|
ret = clk_prepare_enable(i2c->pclk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to enable clock (%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
i2c->pclkrate = clk_get_rate(i2c->pclk);
|
|
}
|
|
|
|
if (i2c->pclkrate < SYNQUACER_I2C_MIN_CLK_RATE ||
|
|
i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE) {
|
|
dev_err(&pdev->dev, "PCLK missing or out of range (%d)\n",
|
|
i2c->pclkrate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
i2c->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(i2c->base))
|
|
return PTR_ERR(i2c->base);
|
|
|
|
i2c->irq = platform_get_irq(pdev, 0);
|
|
if (i2c->irq < 0)
|
|
return i2c->irq;
|
|
|
|
ret = devm_request_irq(&pdev->dev, i2c->irq, synquacer_i2c_isr,
|
|
0, dev_name(&pdev->dev), i2c);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
|
|
return ret;
|
|
}
|
|
|
|
i2c->state = STATE_IDLE;
|
|
i2c->dev = &pdev->dev;
|
|
i2c->adapter = synquacer_i2c_ops;
|
|
i2c_set_adapdata(&i2c->adapter, i2c);
|
|
i2c->adapter.dev.parent = &pdev->dev;
|
|
i2c->adapter.dev.of_node = pdev->dev.of_node;
|
|
ACPI_COMPANION_SET(&i2c->adapter.dev, ACPI_COMPANION(&pdev->dev));
|
|
i2c->adapter.nr = pdev->id;
|
|
init_completion(&i2c->completion);
|
|
|
|
if (bus_speed < I2C_MAX_FAST_MODE_FREQ)
|
|
i2c->speed_khz = SYNQUACER_I2C_SPEED_SM;
|
|
else
|
|
i2c->speed_khz = SYNQUACER_I2C_SPEED_FM;
|
|
|
|
synquacer_i2c_hw_init(i2c);
|
|
|
|
ret = i2c_add_numbered_adapter(&i2c->adapter);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add bus to i2c core\n");
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, i2c);
|
|
|
|
dev_info(&pdev->dev, "%s: synquacer_i2c adapter\n",
|
|
dev_name(&i2c->adapter.dev));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void synquacer_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct synquacer_i2c *i2c = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&i2c->adapter);
|
|
if (!IS_ERR(i2c->pclk))
|
|
clk_disable_unprepare(i2c->pclk);
|
|
};
|
|
|
|
static const struct of_device_id synquacer_i2c_dt_ids[] __maybe_unused = {
|
|
{ .compatible = "socionext,synquacer-i2c" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, synquacer_i2c_dt_ids);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id synquacer_i2c_acpi_ids[] = {
|
|
{ "SCX0003" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, synquacer_i2c_acpi_ids);
|
|
#endif
|
|
|
|
static struct platform_driver synquacer_i2c_driver = {
|
|
.probe = synquacer_i2c_probe,
|
|
.remove_new = synquacer_i2c_remove,
|
|
.driver = {
|
|
.name = "synquacer_i2c",
|
|
.of_match_table = of_match_ptr(synquacer_i2c_dt_ids),
|
|
.acpi_match_table = ACPI_PTR(synquacer_i2c_acpi_ids),
|
|
},
|
|
};
|
|
module_platform_driver(synquacer_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Fujitsu Semiconductor Ltd");
|
|
MODULE_DESCRIPTION("Socionext SynQuacer I2C Driver");
|
|
MODULE_LICENSE("GPL v2");
|