mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 20:51:44 +00:00
2158566b44
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
346 lines
8.2 KiB
C
346 lines
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* drivers/i2c/busses/i2c-mt7621.c
|
|
*
|
|
* Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
|
|
* Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
|
|
* Copyright (C) 2018 Jan Breuer <jan.breuer@jaybee.cz>
|
|
*
|
|
* Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
|
|
* (C) 2014 Sittisak <sittisaks@hotmail.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/reset.h>
|
|
|
|
#define REG_SM0CFG2_REG 0x28
|
|
#define REG_SM0CTL0_REG 0x40
|
|
#define REG_SM0CTL1_REG 0x44
|
|
#define REG_SM0D0_REG 0x50
|
|
#define REG_SM0D1_REG 0x54
|
|
#define REG_PINTEN_REG 0x5c
|
|
#define REG_PINTST_REG 0x60
|
|
#define REG_PINTCL_REG 0x64
|
|
|
|
/* REG_SM0CFG2_REG */
|
|
#define SM0CFG2_IS_AUTOMODE BIT(0)
|
|
|
|
/* REG_SM0CTL0_REG */
|
|
#define SM0CTL0_ODRAIN BIT(31)
|
|
#define SM0CTL0_CLK_DIV_MASK (0x7ff << 16)
|
|
#define SM0CTL0_CLK_DIV_MAX 0x7ff
|
|
#define SM0CTL0_CS_STATUS BIT(4)
|
|
#define SM0CTL0_SCL_STATE BIT(3)
|
|
#define SM0CTL0_SDA_STATE BIT(2)
|
|
#define SM0CTL0_EN BIT(1)
|
|
#define SM0CTL0_SCL_STRETCH BIT(0)
|
|
|
|
/* REG_SM0CTL1_REG */
|
|
#define SM0CTL1_ACK_MASK (0xff << 16)
|
|
#define SM0CTL1_PGLEN_MASK (0x7 << 8)
|
|
#define SM0CTL1_PGLEN(x) ((((x) - 1) << 8) & SM0CTL1_PGLEN_MASK)
|
|
#define SM0CTL1_READ (5 << 4)
|
|
#define SM0CTL1_READ_LAST (4 << 4)
|
|
#define SM0CTL1_STOP (3 << 4)
|
|
#define SM0CTL1_WRITE (2 << 4)
|
|
#define SM0CTL1_START (1 << 4)
|
|
#define SM0CTL1_MODE_MASK (0x7 << 4)
|
|
#define SM0CTL1_TRI BIT(0)
|
|
|
|
/* timeout waiting for I2C devices to respond */
|
|
#define TIMEOUT_MS 1000
|
|
|
|
struct mtk_i2c {
|
|
void __iomem *base;
|
|
struct device *dev;
|
|
struct i2c_adapter adap;
|
|
u32 bus_freq;
|
|
u32 clk_div;
|
|
u32 flags;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static int mtk_i2c_wait_idle(struct mtk_i2c *i2c)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = readl_relaxed_poll_timeout(i2c->base + REG_SM0CTL1_REG,
|
|
val, !(val & SM0CTL1_TRI),
|
|
10, TIMEOUT_MS * 1000);
|
|
if (ret)
|
|
dev_dbg(i2c->dev, "idle err(%d)\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mtk_i2c_reset(struct mtk_i2c *i2c)
|
|
{
|
|
int ret;
|
|
|
|
ret = device_reset(i2c->adap.dev.parent);
|
|
if (ret)
|
|
dev_err(i2c->dev, "I2C reset failed!\n");
|
|
|
|
/*
|
|
* Don't set SM0CTL0_ODRAIN as its bit meaning is inverted. To
|
|
* configure open-drain mode, this bit needs to be cleared.
|
|
*/
|
|
iowrite32(((i2c->clk_div << 16) & SM0CTL0_CLK_DIV_MASK) | SM0CTL0_EN |
|
|
SM0CTL0_SCL_STRETCH, i2c->base + REG_SM0CTL0_REG);
|
|
iowrite32(0, i2c->base + REG_SM0CFG2_REG);
|
|
}
|
|
|
|
static void mtk_i2c_dump_reg(struct mtk_i2c *i2c)
|
|
{
|
|
dev_dbg(i2c->dev,
|
|
"SM0CFG2 %08x, SM0CTL0 %08x, SM0CTL1 %08x, SM0D0 %08x, SM0D1 %08x\n",
|
|
ioread32(i2c->base + REG_SM0CFG2_REG),
|
|
ioread32(i2c->base + REG_SM0CTL0_REG),
|
|
ioread32(i2c->base + REG_SM0CTL1_REG),
|
|
ioread32(i2c->base + REG_SM0D0_REG),
|
|
ioread32(i2c->base + REG_SM0D1_REG));
|
|
}
|
|
|
|
static int mtk_i2c_check_ack(struct mtk_i2c *i2c, u32 expected)
|
|
{
|
|
u32 ack = readl_relaxed(i2c->base + REG_SM0CTL1_REG);
|
|
u32 ack_expected = (expected << 16) & SM0CTL1_ACK_MASK;
|
|
|
|
return ((ack & ack_expected) == ack_expected) ? 0 : -ENXIO;
|
|
}
|
|
|
|
static int mtk_i2c_master_start(struct mtk_i2c *i2c)
|
|
{
|
|
iowrite32(SM0CTL1_START | SM0CTL1_TRI, i2c->base + REG_SM0CTL1_REG);
|
|
return mtk_i2c_wait_idle(i2c);
|
|
}
|
|
|
|
static int mtk_i2c_master_stop(struct mtk_i2c *i2c)
|
|
{
|
|
iowrite32(SM0CTL1_STOP | SM0CTL1_TRI, i2c->base + REG_SM0CTL1_REG);
|
|
return mtk_i2c_wait_idle(i2c);
|
|
}
|
|
|
|
static int mtk_i2c_master_cmd(struct mtk_i2c *i2c, u32 cmd, int page_len)
|
|
{
|
|
iowrite32(cmd | SM0CTL1_TRI | SM0CTL1_PGLEN(page_len),
|
|
i2c->base + REG_SM0CTL1_REG);
|
|
return mtk_i2c_wait_idle(i2c);
|
|
}
|
|
|
|
static int mtk_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct mtk_i2c *i2c;
|
|
struct i2c_msg *pmsg;
|
|
u16 addr;
|
|
int i, j, ret, len, page_len;
|
|
u32 cmd;
|
|
u32 data[2];
|
|
|
|
i2c = i2c_get_adapdata(adap);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
pmsg = &msgs[i];
|
|
|
|
/* wait hardware idle */
|
|
ret = mtk_i2c_wait_idle(i2c);
|
|
if (ret)
|
|
goto err_timeout;
|
|
|
|
/* start sequence */
|
|
ret = mtk_i2c_master_start(i2c);
|
|
if (ret)
|
|
goto err_timeout;
|
|
|
|
/* write address */
|
|
if (pmsg->flags & I2C_M_TEN) {
|
|
/* 10 bits address */
|
|
addr = 0xf0 | ((pmsg->addr >> 7) & 0x06);
|
|
addr |= (pmsg->addr & 0xff) << 8;
|
|
if (pmsg->flags & I2C_M_RD)
|
|
addr |= 1;
|
|
iowrite32(addr, i2c->base + REG_SM0D0_REG);
|
|
ret = mtk_i2c_master_cmd(i2c, SM0CTL1_WRITE, 2);
|
|
if (ret)
|
|
goto err_timeout;
|
|
} else {
|
|
/* 7 bits address */
|
|
addr = i2c_8bit_addr_from_msg(pmsg);
|
|
iowrite32(addr, i2c->base + REG_SM0D0_REG);
|
|
ret = mtk_i2c_master_cmd(i2c, SM0CTL1_WRITE, 1);
|
|
if (ret)
|
|
goto err_timeout;
|
|
}
|
|
|
|
/* check address ACK */
|
|
if (!(pmsg->flags & I2C_M_IGNORE_NAK)) {
|
|
ret = mtk_i2c_check_ack(i2c, BIT(0));
|
|
if (ret)
|
|
goto err_ack;
|
|
}
|
|
|
|
/* transfer data */
|
|
for (len = pmsg->len, j = 0; len > 0; len -= 8, j += 8) {
|
|
page_len = (len >= 8) ? 8 : len;
|
|
|
|
if (pmsg->flags & I2C_M_RD) {
|
|
cmd = (len > 8) ?
|
|
SM0CTL1_READ : SM0CTL1_READ_LAST;
|
|
} else {
|
|
memcpy(data, &pmsg->buf[j], page_len);
|
|
iowrite32(data[0], i2c->base + REG_SM0D0_REG);
|
|
iowrite32(data[1], i2c->base + REG_SM0D1_REG);
|
|
cmd = SM0CTL1_WRITE;
|
|
}
|
|
|
|
ret = mtk_i2c_master_cmd(i2c, cmd, page_len);
|
|
if (ret)
|
|
goto err_timeout;
|
|
|
|
if (pmsg->flags & I2C_M_RD) {
|
|
data[0] = ioread32(i2c->base + REG_SM0D0_REG);
|
|
data[1] = ioread32(i2c->base + REG_SM0D1_REG);
|
|
memcpy(&pmsg->buf[j], data, page_len);
|
|
} else {
|
|
if (!(pmsg->flags & I2C_M_IGNORE_NAK)) {
|
|
ret = mtk_i2c_check_ack(i2c,
|
|
(1 << page_len)
|
|
- 1);
|
|
if (ret)
|
|
goto err_ack;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = mtk_i2c_master_stop(i2c);
|
|
if (ret)
|
|
goto err_timeout;
|
|
|
|
/* the return value is number of executed messages */
|
|
return i;
|
|
|
|
err_ack:
|
|
ret = mtk_i2c_master_stop(i2c);
|
|
if (ret)
|
|
goto err_timeout;
|
|
return -ENXIO;
|
|
|
|
err_timeout:
|
|
mtk_i2c_dump_reg(i2c);
|
|
mtk_i2c_reset(i2c);
|
|
return ret;
|
|
}
|
|
|
|
static u32 mtk_i2c_func(struct i2c_adapter *a)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
|
|
}
|
|
|
|
static const struct i2c_algorithm mtk_i2c_algo = {
|
|
.master_xfer = mtk_i2c_master_xfer,
|
|
.functionality = mtk_i2c_func,
|
|
};
|
|
|
|
static const struct of_device_id i2c_mtk_dt_ids[] = {
|
|
{ .compatible = "mediatek,mt7621-i2c" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, i2c_mtk_dt_ids);
|
|
|
|
static void mtk_i2c_init(struct mtk_i2c *i2c)
|
|
{
|
|
i2c->clk_div = clk_get_rate(i2c->clk) / i2c->bus_freq - 1;
|
|
if (i2c->clk_div < 99)
|
|
i2c->clk_div = 99;
|
|
if (i2c->clk_div > SM0CTL0_CLK_DIV_MAX)
|
|
i2c->clk_div = SM0CTL0_CLK_DIV_MAX;
|
|
|
|
mtk_i2c_reset(i2c);
|
|
}
|
|
|
|
static int mtk_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct mtk_i2c *i2c;
|
|
struct i2c_adapter *adap;
|
|
int ret;
|
|
|
|
i2c = devm_kzalloc(&pdev->dev, sizeof(struct mtk_i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
i2c->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
|
|
if (IS_ERR(i2c->base))
|
|
return PTR_ERR(i2c->base);
|
|
|
|
i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
|
|
if (IS_ERR(i2c->clk)) {
|
|
dev_err(&pdev->dev, "Failed to enable clock\n");
|
|
return PTR_ERR(i2c->clk);
|
|
}
|
|
|
|
i2c->dev = &pdev->dev;
|
|
|
|
if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
|
|
&i2c->bus_freq))
|
|
i2c->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
|
|
|
|
if (i2c->bus_freq == 0) {
|
|
dev_warn(i2c->dev, "clock-frequency 0 not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
adap = &i2c->adap;
|
|
adap->owner = THIS_MODULE;
|
|
adap->algo = &mtk_i2c_algo;
|
|
adap->retries = 3;
|
|
adap->dev.parent = &pdev->dev;
|
|
i2c_set_adapdata(adap, i2c);
|
|
adap->dev.of_node = pdev->dev.of_node;
|
|
strscpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
|
|
|
|
platform_set_drvdata(pdev, i2c);
|
|
|
|
mtk_i2c_init(i2c);
|
|
|
|
ret = i2c_add_adapter(adap);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev_info(&pdev->dev, "clock %u kHz\n", i2c->bus_freq / 1000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mtk_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct mtk_i2c *i2c = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&i2c->adap);
|
|
}
|
|
|
|
static struct platform_driver mtk_i2c_driver = {
|
|
.probe = mtk_i2c_probe,
|
|
.remove_new = mtk_i2c_remove,
|
|
.driver = {
|
|
.name = "i2c-mt7621",
|
|
.of_match_table = i2c_mtk_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mtk_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Steven Liu");
|
|
MODULE_DESCRIPTION("MT7621 I2C host driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:MT7621-I2C");
|