linux/drivers/gpu/drm/r128/r128_cce.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

942 lines
24 KiB
C

/* r128_cce.c -- ATI Rage 128 driver -*- linux-c -*-
* Created: Wed Apr 5 19:24:19 2000 by kevin@precisioninsight.com
*/
/*
* Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Gareth Hughes <gareth@valinux.com>
*/
#include <linux/firmware.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "r128_drm.h"
#include "r128_drv.h"
#define R128_FIFO_DEBUG 0
#define FIRMWARE_NAME "r128/r128_cce.bin"
MODULE_FIRMWARE(FIRMWARE_NAME);
static int R128_READ_PLL(struct drm_device * dev, int addr)
{
drm_r128_private_t *dev_priv = dev->dev_private;
R128_WRITE8(R128_CLOCK_CNTL_INDEX, addr & 0x1f);
return R128_READ(R128_CLOCK_CNTL_DATA);
}
#if R128_FIFO_DEBUG
static void r128_status(drm_r128_private_t * dev_priv)
{
printk("GUI_STAT = 0x%08x\n",
(unsigned int)R128_READ(R128_GUI_STAT));
printk("PM4_STAT = 0x%08x\n",
(unsigned int)R128_READ(R128_PM4_STAT));
printk("PM4_BUFFER_DL_WPTR = 0x%08x\n",
(unsigned int)R128_READ(R128_PM4_BUFFER_DL_WPTR));
printk("PM4_BUFFER_DL_RPTR = 0x%08x\n",
(unsigned int)R128_READ(R128_PM4_BUFFER_DL_RPTR));
printk("PM4_MICRO_CNTL = 0x%08x\n",
(unsigned int)R128_READ(R128_PM4_MICRO_CNTL));
printk("PM4_BUFFER_CNTL = 0x%08x\n",
(unsigned int)R128_READ(R128_PM4_BUFFER_CNTL));
}
#endif
/* ================================================================
* Engine, FIFO control
*/
static int r128_do_pixcache_flush(drm_r128_private_t * dev_priv)
{
u32 tmp;
int i;
tmp = R128_READ(R128_PC_NGUI_CTLSTAT) | R128_PC_FLUSH_ALL;
R128_WRITE(R128_PC_NGUI_CTLSTAT, tmp);
for (i = 0; i < dev_priv->usec_timeout; i++) {
if (!(R128_READ(R128_PC_NGUI_CTLSTAT) & R128_PC_BUSY)) {
return 0;
}
DRM_UDELAY(1);
}
#if R128_FIFO_DEBUG
DRM_ERROR("failed!\n");
#endif
return -EBUSY;
}
static int r128_do_wait_for_fifo(drm_r128_private_t * dev_priv, int entries)
{
int i;
for (i = 0; i < dev_priv->usec_timeout; i++) {
int slots = R128_READ(R128_GUI_STAT) & R128_GUI_FIFOCNT_MASK;
if (slots >= entries)
return 0;
DRM_UDELAY(1);
}
#if R128_FIFO_DEBUG
DRM_ERROR("failed!\n");
#endif
return -EBUSY;
}
static int r128_do_wait_for_idle(drm_r128_private_t * dev_priv)
{
int i, ret;
ret = r128_do_wait_for_fifo(dev_priv, 64);
if (ret)
return ret;
for (i = 0; i < dev_priv->usec_timeout; i++) {
if (!(R128_READ(R128_GUI_STAT) & R128_GUI_ACTIVE)) {
r128_do_pixcache_flush(dev_priv);
return 0;
}
DRM_UDELAY(1);
}
#if R128_FIFO_DEBUG
DRM_ERROR("failed!\n");
#endif
return -EBUSY;
}
/* ================================================================
* CCE control, initialization
*/
/* Load the microcode for the CCE */
static int r128_cce_load_microcode(drm_r128_private_t *dev_priv)
{
struct platform_device *pdev;
const struct firmware *fw;
const __be32 *fw_data;
int rc, i;
DRM_DEBUG("\n");
pdev = platform_device_register_simple("r128_cce", 0, NULL, 0);
if (IS_ERR(pdev)) {
printk(KERN_ERR "r128_cce: Failed to register firmware\n");
return PTR_ERR(pdev);
}
rc = request_firmware(&fw, FIRMWARE_NAME, &pdev->dev);
platform_device_unregister(pdev);
if (rc) {
printk(KERN_ERR "r128_cce: Failed to load firmware \"%s\"\n",
FIRMWARE_NAME);
return rc;
}
if (fw->size != 256 * 8) {
printk(KERN_ERR
"r128_cce: Bogus length %zu in firmware \"%s\"\n",
fw->size, FIRMWARE_NAME);
rc = -EINVAL;
goto out_release;
}
r128_do_wait_for_idle(dev_priv);
fw_data = (const __be32 *)fw->data;
R128_WRITE(R128_PM4_MICROCODE_ADDR, 0);
for (i = 0; i < 256; i++) {
R128_WRITE(R128_PM4_MICROCODE_DATAH,
be32_to_cpup(&fw_data[i * 2]));
R128_WRITE(R128_PM4_MICROCODE_DATAL,
be32_to_cpup(&fw_data[i * 2 + 1]));
}
out_release:
release_firmware(fw);
return rc;
}
/* Flush any pending commands to the CCE. This should only be used just
* prior to a wait for idle, as it informs the engine that the command
* stream is ending.
*/
static void r128_do_cce_flush(drm_r128_private_t * dev_priv)
{
u32 tmp;
tmp = R128_READ(R128_PM4_BUFFER_DL_WPTR) | R128_PM4_BUFFER_DL_DONE;
R128_WRITE(R128_PM4_BUFFER_DL_WPTR, tmp);
}
/* Wait for the CCE to go idle.
*/
int r128_do_cce_idle(drm_r128_private_t * dev_priv)
{
int i;
for (i = 0; i < dev_priv->usec_timeout; i++) {
if (GET_RING_HEAD(dev_priv) == dev_priv->ring.tail) {
int pm4stat = R128_READ(R128_PM4_STAT);
if (((pm4stat & R128_PM4_FIFOCNT_MASK) >=
dev_priv->cce_fifo_size) &&
!(pm4stat & (R128_PM4_BUSY |
R128_PM4_GUI_ACTIVE))) {
return r128_do_pixcache_flush(dev_priv);
}
}
DRM_UDELAY(1);
}
#if R128_FIFO_DEBUG
DRM_ERROR("failed!\n");
r128_status(dev_priv);
#endif
return -EBUSY;
}
/* Start the Concurrent Command Engine.
*/
static void r128_do_cce_start(drm_r128_private_t * dev_priv)
{
r128_do_wait_for_idle(dev_priv);
R128_WRITE(R128_PM4_BUFFER_CNTL,
dev_priv->cce_mode | dev_priv->ring.size_l2qw
| R128_PM4_BUFFER_CNTL_NOUPDATE);
R128_READ(R128_PM4_BUFFER_ADDR); /* as per the sample code */
R128_WRITE(R128_PM4_MICRO_CNTL, R128_PM4_MICRO_FREERUN);
dev_priv->cce_running = 1;
}
/* Reset the Concurrent Command Engine. This will not flush any pending
* commands, so you must wait for the CCE command stream to complete
* before calling this routine.
*/
static void r128_do_cce_reset(drm_r128_private_t * dev_priv)
{
R128_WRITE(R128_PM4_BUFFER_DL_WPTR, 0);
R128_WRITE(R128_PM4_BUFFER_DL_RPTR, 0);
dev_priv->ring.tail = 0;
}
/* Stop the Concurrent Command Engine. This will not flush any pending
* commands, so you must flush the command stream and wait for the CCE
* to go idle before calling this routine.
*/
static void r128_do_cce_stop(drm_r128_private_t * dev_priv)
{
R128_WRITE(R128_PM4_MICRO_CNTL, 0);
R128_WRITE(R128_PM4_BUFFER_CNTL,
R128_PM4_NONPM4 | R128_PM4_BUFFER_CNTL_NOUPDATE);
dev_priv->cce_running = 0;
}
/* Reset the engine. This will stop the CCE if it is running.
*/
static int r128_do_engine_reset(struct drm_device * dev)
{
drm_r128_private_t *dev_priv = dev->dev_private;
u32 clock_cntl_index, mclk_cntl, gen_reset_cntl;
r128_do_pixcache_flush(dev_priv);
clock_cntl_index = R128_READ(R128_CLOCK_CNTL_INDEX);
mclk_cntl = R128_READ_PLL(dev, R128_MCLK_CNTL);
R128_WRITE_PLL(R128_MCLK_CNTL,
mclk_cntl | R128_FORCE_GCP | R128_FORCE_PIPE3D_CP);
gen_reset_cntl = R128_READ(R128_GEN_RESET_CNTL);
/* Taken from the sample code - do not change */
R128_WRITE(R128_GEN_RESET_CNTL, gen_reset_cntl | R128_SOFT_RESET_GUI);
R128_READ(R128_GEN_RESET_CNTL);
R128_WRITE(R128_GEN_RESET_CNTL, gen_reset_cntl & ~R128_SOFT_RESET_GUI);
R128_READ(R128_GEN_RESET_CNTL);
R128_WRITE_PLL(R128_MCLK_CNTL, mclk_cntl);
R128_WRITE(R128_CLOCK_CNTL_INDEX, clock_cntl_index);
R128_WRITE(R128_GEN_RESET_CNTL, gen_reset_cntl);
/* Reset the CCE ring */
r128_do_cce_reset(dev_priv);
/* The CCE is no longer running after an engine reset */
dev_priv->cce_running = 0;
/* Reset any pending vertex, indirect buffers */
r128_freelist_reset(dev);
return 0;
}
static void r128_cce_init_ring_buffer(struct drm_device * dev,
drm_r128_private_t * dev_priv)
{
u32 ring_start;
u32 tmp;
DRM_DEBUG("\n");
/* The manual (p. 2) says this address is in "VM space". This
* means it's an offset from the start of AGP space.
*/
#if __OS_HAS_AGP
if (!dev_priv->is_pci)
ring_start = dev_priv->cce_ring->offset - dev->agp->base;
else
#endif
ring_start = dev_priv->cce_ring->offset -
(unsigned long)dev->sg->virtual;
R128_WRITE(R128_PM4_BUFFER_OFFSET, ring_start | R128_AGP_OFFSET);
R128_WRITE(R128_PM4_BUFFER_DL_WPTR, 0);
R128_WRITE(R128_PM4_BUFFER_DL_RPTR, 0);
/* Set watermark control */
R128_WRITE(R128_PM4_BUFFER_WM_CNTL,
((R128_WATERMARK_L / 4) << R128_WMA_SHIFT)
| ((R128_WATERMARK_M / 4) << R128_WMB_SHIFT)
| ((R128_WATERMARK_N / 4) << R128_WMC_SHIFT)
| ((R128_WATERMARK_K / 64) << R128_WB_WM_SHIFT));
/* Force read. Why? Because it's in the examples... */
R128_READ(R128_PM4_BUFFER_ADDR);
/* Turn on bus mastering */
tmp = R128_READ(R128_BUS_CNTL) & ~R128_BUS_MASTER_DIS;
R128_WRITE(R128_BUS_CNTL, tmp);
}
static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init)
{
drm_r128_private_t *dev_priv;
int rc;
DRM_DEBUG("\n");
if (dev->dev_private) {
DRM_DEBUG("called when already initialized\n");
return -EINVAL;
}
dev_priv = kzalloc(sizeof(drm_r128_private_t), GFP_KERNEL);
if (dev_priv == NULL)
return -ENOMEM;
dev_priv->is_pci = init->is_pci;
if (dev_priv->is_pci && !dev->sg) {
DRM_ERROR("PCI GART memory not allocated!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -EINVAL;
}
dev_priv->usec_timeout = init->usec_timeout;
if (dev_priv->usec_timeout < 1 ||
dev_priv->usec_timeout > R128_MAX_USEC_TIMEOUT) {
DRM_DEBUG("TIMEOUT problem!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -EINVAL;
}
dev_priv->cce_mode = init->cce_mode;
/* GH: Simple idle check.
*/
atomic_set(&dev_priv->idle_count, 0);
/* We don't support anything other than bus-mastering ring mode,
* but the ring can be in either AGP or PCI space for the ring
* read pointer.
*/
if ((init->cce_mode != R128_PM4_192BM) &&
(init->cce_mode != R128_PM4_128BM_64INDBM) &&
(init->cce_mode != R128_PM4_64BM_128INDBM) &&
(init->cce_mode != R128_PM4_64BM_64VCBM_64INDBM)) {
DRM_DEBUG("Bad cce_mode!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -EINVAL;
}
switch (init->cce_mode) {
case R128_PM4_NONPM4:
dev_priv->cce_fifo_size = 0;
break;
case R128_PM4_192PIO:
case R128_PM4_192BM:
dev_priv->cce_fifo_size = 192;
break;
case R128_PM4_128PIO_64INDBM:
case R128_PM4_128BM_64INDBM:
dev_priv->cce_fifo_size = 128;
break;
case R128_PM4_64PIO_128INDBM:
case R128_PM4_64BM_128INDBM:
case R128_PM4_64PIO_64VCBM_64INDBM:
case R128_PM4_64BM_64VCBM_64INDBM:
case R128_PM4_64PIO_64VCPIO_64INDPIO:
dev_priv->cce_fifo_size = 64;
break;
}
switch (init->fb_bpp) {
case 16:
dev_priv->color_fmt = R128_DATATYPE_RGB565;
break;
case 32:
default:
dev_priv->color_fmt = R128_DATATYPE_ARGB8888;
break;
}
dev_priv->front_offset = init->front_offset;
dev_priv->front_pitch = init->front_pitch;
dev_priv->back_offset = init->back_offset;
dev_priv->back_pitch = init->back_pitch;
switch (init->depth_bpp) {
case 16:
dev_priv->depth_fmt = R128_DATATYPE_RGB565;
break;
case 24:
case 32:
default:
dev_priv->depth_fmt = R128_DATATYPE_ARGB8888;
break;
}
dev_priv->depth_offset = init->depth_offset;
dev_priv->depth_pitch = init->depth_pitch;
dev_priv->span_offset = init->span_offset;
dev_priv->front_pitch_offset_c = (((dev_priv->front_pitch / 8) << 21) |
(dev_priv->front_offset >> 5));
dev_priv->back_pitch_offset_c = (((dev_priv->back_pitch / 8) << 21) |
(dev_priv->back_offset >> 5));
dev_priv->depth_pitch_offset_c = (((dev_priv->depth_pitch / 8) << 21) |
(dev_priv->depth_offset >> 5) |
R128_DST_TILE);
dev_priv->span_pitch_offset_c = (((dev_priv->depth_pitch / 8) << 21) |
(dev_priv->span_offset >> 5));
dev_priv->sarea = drm_getsarea(dev);
if (!dev_priv->sarea) {
DRM_ERROR("could not find sarea!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -EINVAL;
}
dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset);
if (!dev_priv->mmio) {
DRM_ERROR("could not find mmio region!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -EINVAL;
}
dev_priv->cce_ring = drm_core_findmap(dev, init->ring_offset);
if (!dev_priv->cce_ring) {
DRM_ERROR("could not find cce ring region!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -EINVAL;
}
dev_priv->ring_rptr = drm_core_findmap(dev, init->ring_rptr_offset);
if (!dev_priv->ring_rptr) {
DRM_ERROR("could not find ring read pointer!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -EINVAL;
}
dev->agp_buffer_token = init->buffers_offset;
dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset);
if (!dev->agp_buffer_map) {
DRM_ERROR("could not find dma buffer region!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -EINVAL;
}
if (!dev_priv->is_pci) {
dev_priv->agp_textures =
drm_core_findmap(dev, init->agp_textures_offset);
if (!dev_priv->agp_textures) {
DRM_ERROR("could not find agp texture region!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -EINVAL;
}
}
dev_priv->sarea_priv =
(drm_r128_sarea_t *) ((u8 *) dev_priv->sarea->handle +
init->sarea_priv_offset);
#if __OS_HAS_AGP
if (!dev_priv->is_pci) {
drm_core_ioremap_wc(dev_priv->cce_ring, dev);
drm_core_ioremap_wc(dev_priv->ring_rptr, dev);
drm_core_ioremap_wc(dev->agp_buffer_map, dev);
if (!dev_priv->cce_ring->handle ||
!dev_priv->ring_rptr->handle ||
!dev->agp_buffer_map->handle) {
DRM_ERROR("Could not ioremap agp regions!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -ENOMEM;
}
} else
#endif
{
dev_priv->cce_ring->handle =
(void *)(unsigned long)dev_priv->cce_ring->offset;
dev_priv->ring_rptr->handle =
(void *)(unsigned long)dev_priv->ring_rptr->offset;
dev->agp_buffer_map->handle =
(void *)(unsigned long)dev->agp_buffer_map->offset;
}
#if __OS_HAS_AGP
if (!dev_priv->is_pci)
dev_priv->cce_buffers_offset = dev->agp->base;
else
#endif
dev_priv->cce_buffers_offset = (unsigned long)dev->sg->virtual;
dev_priv->ring.start = (u32 *) dev_priv->cce_ring->handle;
dev_priv->ring.end = ((u32 *) dev_priv->cce_ring->handle
+ init->ring_size / sizeof(u32));
dev_priv->ring.size = init->ring_size;
dev_priv->ring.size_l2qw = drm_order(init->ring_size / 8);
dev_priv->ring.tail_mask = (dev_priv->ring.size / sizeof(u32)) - 1;
dev_priv->ring.high_mark = 128;
dev_priv->sarea_priv->last_frame = 0;
R128_WRITE(R128_LAST_FRAME_REG, dev_priv->sarea_priv->last_frame);
dev_priv->sarea_priv->last_dispatch = 0;
R128_WRITE(R128_LAST_DISPATCH_REG, dev_priv->sarea_priv->last_dispatch);
#if __OS_HAS_AGP
if (dev_priv->is_pci) {
#endif
dev_priv->gart_info.table_mask = DMA_BIT_MASK(32);
dev_priv->gart_info.gart_table_location = DRM_ATI_GART_MAIN;
dev_priv->gart_info.table_size = R128_PCIGART_TABLE_SIZE;
dev_priv->gart_info.addr = NULL;
dev_priv->gart_info.bus_addr = 0;
dev_priv->gart_info.gart_reg_if = DRM_ATI_GART_PCI;
if (!drm_ati_pcigart_init(dev, &dev_priv->gart_info)) {
DRM_ERROR("failed to init PCI GART!\n");
dev->dev_private = (void *)dev_priv;
r128_do_cleanup_cce(dev);
return -ENOMEM;
}
R128_WRITE(R128_PCI_GART_PAGE, dev_priv->gart_info.bus_addr);
#if __OS_HAS_AGP
}
#endif
r128_cce_init_ring_buffer(dev, dev_priv);
rc = r128_cce_load_microcode(dev_priv);
dev->dev_private = (void *)dev_priv;
r128_do_engine_reset(dev);
if (rc) {
DRM_ERROR("Failed to load firmware!\n");
r128_do_cleanup_cce(dev);
}
return rc;
}
int r128_do_cleanup_cce(struct drm_device * dev)
{
/* Make sure interrupts are disabled here because the uninstall ioctl
* may not have been called from userspace and after dev_private
* is freed, it's too late.
*/
if (dev->irq_enabled)
drm_irq_uninstall(dev);
if (dev->dev_private) {
drm_r128_private_t *dev_priv = dev->dev_private;
#if __OS_HAS_AGP
if (!dev_priv->is_pci) {
if (dev_priv->cce_ring != NULL)
drm_core_ioremapfree(dev_priv->cce_ring, dev);
if (dev_priv->ring_rptr != NULL)
drm_core_ioremapfree(dev_priv->ring_rptr, dev);
if (dev->agp_buffer_map != NULL) {
drm_core_ioremapfree(dev->agp_buffer_map, dev);
dev->agp_buffer_map = NULL;
}
} else
#endif
{
if (dev_priv->gart_info.bus_addr)
if (!drm_ati_pcigart_cleanup(dev,
&dev_priv->gart_info))
DRM_ERROR
("failed to cleanup PCI GART!\n");
}
kfree(dev->dev_private);
dev->dev_private = NULL;
}
return 0;
}
int r128_cce_init(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
drm_r128_init_t *init = data;
DRM_DEBUG("\n");
LOCK_TEST_WITH_RETURN(dev, file_priv);
switch (init->func) {
case R128_INIT_CCE:
return r128_do_init_cce(dev, init);
case R128_CLEANUP_CCE:
return r128_do_cleanup_cce(dev);
}
return -EINVAL;
}
int r128_cce_start(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
drm_r128_private_t *dev_priv = dev->dev_private;
DRM_DEBUG("\n");
LOCK_TEST_WITH_RETURN(dev, file_priv);
DEV_INIT_TEST_WITH_RETURN(dev_priv);
if (dev_priv->cce_running || dev_priv->cce_mode == R128_PM4_NONPM4) {
DRM_DEBUG("while CCE running\n");
return 0;
}
r128_do_cce_start(dev_priv);
return 0;
}
/* Stop the CCE. The engine must have been idled before calling this
* routine.
*/
int r128_cce_stop(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
drm_r128_private_t *dev_priv = dev->dev_private;
drm_r128_cce_stop_t *stop = data;
int ret;
DRM_DEBUG("\n");
LOCK_TEST_WITH_RETURN(dev, file_priv);
DEV_INIT_TEST_WITH_RETURN(dev_priv);
/* Flush any pending CCE commands. This ensures any outstanding
* commands are exectuted by the engine before we turn it off.
*/
if (stop->flush) {
r128_do_cce_flush(dev_priv);
}
/* If we fail to make the engine go idle, we return an error
* code so that the DRM ioctl wrapper can try again.
*/
if (stop->idle) {
ret = r128_do_cce_idle(dev_priv);
if (ret)
return ret;
}
/* Finally, we can turn off the CCE. If the engine isn't idle,
* we will get some dropped triangles as they won't be fully
* rendered before the CCE is shut down.
*/
r128_do_cce_stop(dev_priv);
/* Reset the engine */
r128_do_engine_reset(dev);
return 0;
}
/* Just reset the CCE ring. Called as part of an X Server engine reset.
*/
int r128_cce_reset(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
drm_r128_private_t *dev_priv = dev->dev_private;
DRM_DEBUG("\n");
LOCK_TEST_WITH_RETURN(dev, file_priv);
DEV_INIT_TEST_WITH_RETURN(dev_priv);
r128_do_cce_reset(dev_priv);
/* The CCE is no longer running after an engine reset */
dev_priv->cce_running = 0;
return 0;
}
int r128_cce_idle(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
drm_r128_private_t *dev_priv = dev->dev_private;
DRM_DEBUG("\n");
LOCK_TEST_WITH_RETURN(dev, file_priv);
DEV_INIT_TEST_WITH_RETURN(dev_priv);
if (dev_priv->cce_running) {
r128_do_cce_flush(dev_priv);
}
return r128_do_cce_idle(dev_priv);
}
int r128_engine_reset(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
DRM_DEBUG("\n");
LOCK_TEST_WITH_RETURN(dev, file_priv);
DEV_INIT_TEST_WITH_RETURN(dev->dev_private);
return r128_do_engine_reset(dev);
}
int r128_fullscreen(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
return -EINVAL;
}
/* ================================================================
* Freelist management
*/
#define R128_BUFFER_USED 0xffffffff
#define R128_BUFFER_FREE 0
#if 0
static int r128_freelist_init(struct drm_device * dev)
{
struct drm_device_dma *dma = dev->dma;
drm_r128_private_t *dev_priv = dev->dev_private;
struct drm_buf *buf;
drm_r128_buf_priv_t *buf_priv;
drm_r128_freelist_t *entry;
int i;
dev_priv->head = kzalloc(sizeof(drm_r128_freelist_t), GFP_KERNEL);
if (dev_priv->head == NULL)
return -ENOMEM;
dev_priv->head->age = R128_BUFFER_USED;
for (i = 0; i < dma->buf_count; i++) {
buf = dma->buflist[i];
buf_priv = buf->dev_private;
entry = kmalloc(sizeof(drm_r128_freelist_t), GFP_KERNEL);
if (!entry)
return -ENOMEM;
entry->age = R128_BUFFER_FREE;
entry->buf = buf;
entry->prev = dev_priv->head;
entry->next = dev_priv->head->next;
if (!entry->next)
dev_priv->tail = entry;
buf_priv->discard = 0;
buf_priv->dispatched = 0;
buf_priv->list_entry = entry;
dev_priv->head->next = entry;
if (dev_priv->head->next)
dev_priv->head->next->prev = entry;
}
return 0;
}
#endif
static struct drm_buf *r128_freelist_get(struct drm_device * dev)
{
struct drm_device_dma *dma = dev->dma;
drm_r128_private_t *dev_priv = dev->dev_private;
drm_r128_buf_priv_t *buf_priv;
struct drm_buf *buf;
int i, t;
/* FIXME: Optimize -- use freelist code */
for (i = 0; i < dma->buf_count; i++) {
buf = dma->buflist[i];
buf_priv = buf->dev_private;
if (!buf->file_priv)
return buf;
}
for (t = 0; t < dev_priv->usec_timeout; t++) {
u32 done_age = R128_READ(R128_LAST_DISPATCH_REG);
for (i = 0; i < dma->buf_count; i++) {
buf = dma->buflist[i];
buf_priv = buf->dev_private;
if (buf->pending && buf_priv->age <= done_age) {
/* The buffer has been processed, so it
* can now be used.
*/
buf->pending = 0;
return buf;
}
}
DRM_UDELAY(1);
}
DRM_DEBUG("returning NULL!\n");
return NULL;
}
void r128_freelist_reset(struct drm_device * dev)
{
struct drm_device_dma *dma = dev->dma;
int i;
for (i = 0; i < dma->buf_count; i++) {
struct drm_buf *buf = dma->buflist[i];
drm_r128_buf_priv_t *buf_priv = buf->dev_private;
buf_priv->age = 0;
}
}
/* ================================================================
* CCE command submission
*/
int r128_wait_ring(drm_r128_private_t * dev_priv, int n)
{
drm_r128_ring_buffer_t *ring = &dev_priv->ring;
int i;
for (i = 0; i < dev_priv->usec_timeout; i++) {
r128_update_ring_snapshot(dev_priv);
if (ring->space >= n)
return 0;
DRM_UDELAY(1);
}
/* FIXME: This is being ignored... */
DRM_ERROR("failed!\n");
return -EBUSY;
}
static int r128_cce_get_buffers(struct drm_device * dev,
struct drm_file *file_priv,
struct drm_dma * d)
{
int i;
struct drm_buf *buf;
for (i = d->granted_count; i < d->request_count; i++) {
buf = r128_freelist_get(dev);
if (!buf)
return -EAGAIN;
buf->file_priv = file_priv;
if (DRM_COPY_TO_USER(&d->request_indices[i], &buf->idx,
sizeof(buf->idx)))
return -EFAULT;
if (DRM_COPY_TO_USER(&d->request_sizes[i], &buf->total,
sizeof(buf->total)))
return -EFAULT;
d->granted_count++;
}
return 0;
}
int r128_cce_buffers(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
struct drm_device_dma *dma = dev->dma;
int ret = 0;
struct drm_dma *d = data;
LOCK_TEST_WITH_RETURN(dev, file_priv);
/* Please don't send us buffers.
*/
if (d->send_count != 0) {
DRM_ERROR("Process %d trying to send %d buffers via drmDMA\n",
DRM_CURRENTPID, d->send_count);
return -EINVAL;
}
/* We'll send you buffers.
*/
if (d->request_count < 0 || d->request_count > dma->buf_count) {
DRM_ERROR("Process %d trying to get %d buffers (of %d max)\n",
DRM_CURRENTPID, d->request_count, dma->buf_count);
return -EINVAL;
}
d->granted_count = 0;
if (d->request_count) {
ret = r128_cce_get_buffers(dev, file_priv, d);
}
return ret;
}