mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 12:42:02 +00:00
25df73d933
Make it explicit that ATA host templates are not modified. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> (for DWC AHCI SATA) Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> (for Tegra) Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.g.garry@oracle.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-5-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
462 lines
12 KiB
C
462 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Libata driver for the highpoint 366 and 368 UDMA66 ATA controllers.
|
|
*
|
|
* This driver is heavily based upon:
|
|
*
|
|
* linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003
|
|
*
|
|
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
|
|
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
|
|
* Portions Copyright (C) 2003 Red Hat Inc
|
|
*
|
|
*
|
|
* TODO
|
|
* Look into engine reset on timeout errors. Should not be required.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_hpt366"
|
|
#define DRV_VERSION "0.6.13"
|
|
|
|
struct hpt_clock {
|
|
u8 xfer_mode;
|
|
u32 timing;
|
|
};
|
|
|
|
/* key for bus clock timings
|
|
* bit
|
|
* 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
|
|
* cycles = value + 1
|
|
* 4:7 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
|
|
* cycles = value + 1
|
|
* 8:11 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
|
|
* register access.
|
|
* 12:15 cmd_low_time. Active time of DIOW_/DIOR_ during task file
|
|
* register access.
|
|
* 16:18 udma_cycle_time. Clock cycles for UDMA xfer?
|
|
* 19:21 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer.
|
|
* 22:24 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file
|
|
* register access.
|
|
* 28 UDMA enable.
|
|
* 29 DMA enable.
|
|
* 30 PIO_MST enable. If set, the chip is in bus master mode during
|
|
* PIO xfer.
|
|
* 31 FIFO enable.
|
|
*/
|
|
|
|
static const struct hpt_clock hpt366_40[] = {
|
|
{ XFER_UDMA_4, 0x900fd943 },
|
|
{ XFER_UDMA_3, 0x900ad943 },
|
|
{ XFER_UDMA_2, 0x900bd943 },
|
|
{ XFER_UDMA_1, 0x9008d943 },
|
|
{ XFER_UDMA_0, 0x9008d943 },
|
|
|
|
{ XFER_MW_DMA_2, 0xa008d943 },
|
|
{ XFER_MW_DMA_1, 0xa010d955 },
|
|
{ XFER_MW_DMA_0, 0xa010d9fc },
|
|
|
|
{ XFER_PIO_4, 0xc008d963 },
|
|
{ XFER_PIO_3, 0xc010d974 },
|
|
{ XFER_PIO_2, 0xc010d997 },
|
|
{ XFER_PIO_1, 0xc010d9c7 },
|
|
{ XFER_PIO_0, 0xc018d9d9 },
|
|
{ 0, 0x0120d9d9 }
|
|
};
|
|
|
|
static const struct hpt_clock hpt366_33[] = {
|
|
{ XFER_UDMA_4, 0x90c9a731 },
|
|
{ XFER_UDMA_3, 0x90cfa731 },
|
|
{ XFER_UDMA_2, 0x90caa731 },
|
|
{ XFER_UDMA_1, 0x90cba731 },
|
|
{ XFER_UDMA_0, 0x90c8a731 },
|
|
|
|
{ XFER_MW_DMA_2, 0xa0c8a731 },
|
|
{ XFER_MW_DMA_1, 0xa0c8a732 }, /* 0xa0c8a733 */
|
|
{ XFER_MW_DMA_0, 0xa0c8a797 },
|
|
|
|
{ XFER_PIO_4, 0xc0c8a731 },
|
|
{ XFER_PIO_3, 0xc0c8a742 },
|
|
{ XFER_PIO_2, 0xc0d0a753 },
|
|
{ XFER_PIO_1, 0xc0d0a7a3 }, /* 0xc0d0a793 */
|
|
{ XFER_PIO_0, 0xc0d0a7aa }, /* 0xc0d0a7a7 */
|
|
{ 0, 0x0120a7a7 }
|
|
};
|
|
|
|
static const struct hpt_clock hpt366_25[] = {
|
|
{ XFER_UDMA_4, 0x90c98521 },
|
|
{ XFER_UDMA_3, 0x90cf8521 },
|
|
{ XFER_UDMA_2, 0x90cf8521 },
|
|
{ XFER_UDMA_1, 0x90cb8521 },
|
|
{ XFER_UDMA_0, 0x90cb8521 },
|
|
|
|
{ XFER_MW_DMA_2, 0xa0ca8521 },
|
|
{ XFER_MW_DMA_1, 0xa0ca8532 },
|
|
{ XFER_MW_DMA_0, 0xa0ca8575 },
|
|
|
|
{ XFER_PIO_4, 0xc0ca8521 },
|
|
{ XFER_PIO_3, 0xc0ca8532 },
|
|
{ XFER_PIO_2, 0xc0ca8542 },
|
|
{ XFER_PIO_1, 0xc0d08572 },
|
|
{ XFER_PIO_0, 0xc0d08585 },
|
|
{ 0, 0x01208585 }
|
|
};
|
|
|
|
/**
|
|
* hpt36x_find_mode - find the hpt36x timing
|
|
* @ap: ATA port
|
|
* @speed: transfer mode
|
|
*
|
|
* Return the 32bit register programming information for this channel
|
|
* that matches the speed provided.
|
|
*/
|
|
|
|
static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
|
|
{
|
|
struct hpt_clock *clocks = ap->host->private_data;
|
|
|
|
while (clocks->xfer_mode) {
|
|
if (clocks->xfer_mode == speed)
|
|
return clocks->timing;
|
|
clocks++;
|
|
}
|
|
BUG();
|
|
return 0xffffffffU; /* silence compiler warning */
|
|
}
|
|
|
|
static const char * const bad_ata33[] = {
|
|
"Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3",
|
|
"Maxtor 90845U3", "Maxtor 90650U2",
|
|
"Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5",
|
|
"Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
|
|
"Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6",
|
|
"Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
|
|
"Maxtor 90510D4",
|
|
"Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
|
|
"Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7",
|
|
"Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
|
|
"Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5",
|
|
"Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
|
|
NULL
|
|
};
|
|
|
|
static const char * const bad_ata66_4[] = {
|
|
"IBM-DTLA-307075",
|
|
"IBM-DTLA-307060",
|
|
"IBM-DTLA-307045",
|
|
"IBM-DTLA-307030",
|
|
"IBM-DTLA-307020",
|
|
"IBM-DTLA-307015",
|
|
"IBM-DTLA-305040",
|
|
"IBM-DTLA-305030",
|
|
"IBM-DTLA-305020",
|
|
"IC35L010AVER07-0",
|
|
"IC35L020AVER07-0",
|
|
"IC35L030AVER07-0",
|
|
"IC35L040AVER07-0",
|
|
"IC35L060AVER07-0",
|
|
"WDC AC310200R",
|
|
NULL
|
|
};
|
|
|
|
static const char * const bad_ata66_3[] = {
|
|
"WDC AC310200R",
|
|
NULL
|
|
};
|
|
|
|
static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
|
|
const char * const list[])
|
|
{
|
|
unsigned char model_num[ATA_ID_PROD_LEN + 1];
|
|
int i;
|
|
|
|
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
|
|
|
|
i = match_string(list, -1, model_num);
|
|
if (i >= 0) {
|
|
ata_dev_warn(dev, "%s is not supported for %s\n", modestr, list[i]);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* hpt366_filter - mode selection filter
|
|
* @adev: ATA device
|
|
* @mask: Current mask to manipulate and pass back
|
|
*
|
|
* Block UDMA on devices that cause trouble with this controller.
|
|
*/
|
|
|
|
static unsigned int hpt366_filter(struct ata_device *adev, unsigned int mask)
|
|
{
|
|
if (adev->class == ATA_DEV_ATA) {
|
|
if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
|
|
mask &= ~ATA_MASK_UDMA;
|
|
if (hpt_dma_blacklisted(adev, "UDMA3", bad_ata66_3))
|
|
mask &= ~(0xF8 << ATA_SHIFT_UDMA);
|
|
if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
|
|
mask &= ~(0xF0 << ATA_SHIFT_UDMA);
|
|
} else if (adev->class == ATA_DEV_ATAPI)
|
|
mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
|
|
|
|
return mask;
|
|
}
|
|
|
|
static int hpt36x_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u8 ata66;
|
|
|
|
/*
|
|
* Each channel of pata_hpt366 occupies separate PCI function
|
|
* as the primary channel and bit1 indicates the cable type.
|
|
*/
|
|
pci_read_config_byte(pdev, 0x5A, &ata66);
|
|
if (ata66 & 2)
|
|
return ATA_CBL_PATA40;
|
|
return ATA_CBL_PATA80;
|
|
}
|
|
|
|
static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
|
|
u8 mode)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u32 addr = 0x40 + 4 * adev->devno;
|
|
u32 mask, reg, t;
|
|
|
|
/* determine timing mask and find matching clock entry */
|
|
if (mode < XFER_MW_DMA_0)
|
|
mask = 0xc1f8ffff;
|
|
else if (mode < XFER_UDMA_0)
|
|
mask = 0x303800ff;
|
|
else
|
|
mask = 0x30070000;
|
|
|
|
t = hpt36x_find_mode(ap, mode);
|
|
|
|
/*
|
|
* Combine new mode bits with old config bits and disable
|
|
* on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid
|
|
* problems handling I/O errors later.
|
|
*/
|
|
pci_read_config_dword(pdev, addr, ®);
|
|
reg = ((reg & ~mask) | (t & mask)) & ~0xc0000000;
|
|
pci_write_config_dword(pdev, addr, reg);
|
|
}
|
|
|
|
/**
|
|
* hpt366_set_piomode - PIO setup
|
|
* @ap: ATA interface
|
|
* @adev: device on the interface
|
|
*
|
|
* Perform PIO mode setup.
|
|
*/
|
|
|
|
static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
hpt366_set_mode(ap, adev, adev->pio_mode);
|
|
}
|
|
|
|
/**
|
|
* hpt366_set_dmamode - DMA timing setup
|
|
* @ap: ATA interface
|
|
* @adev: Device being configured
|
|
*
|
|
* Set up the channel for MWDMA or UDMA modes. Much the same as with
|
|
* PIO, load the mode number and then set MWDMA or UDMA flag.
|
|
*/
|
|
|
|
static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
hpt366_set_mode(ap, adev, adev->dma_mode);
|
|
}
|
|
|
|
/**
|
|
* hpt366_prereset - reset the hpt36x bus
|
|
* @link: ATA link to reset
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* Perform the initial reset handling for the 36x series controllers.
|
|
* Reset the hardware and state machine,
|
|
*/
|
|
|
|
static int hpt366_prereset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
/*
|
|
* HPT36x chips have one channel per function and have
|
|
* both channel enable bits located differently and visible
|
|
* to both functions -- really stupid design decision... :-(
|
|
* Bit 4 is for the primary channel, bit 5 for the secondary.
|
|
*/
|
|
static const struct pci_bits hpt366_enable_bits = {
|
|
0x50, 1, 0x30, 0x30
|
|
};
|
|
u8 mcr2;
|
|
|
|
if (!pci_test_config_bits(pdev, &hpt366_enable_bits))
|
|
return -ENOENT;
|
|
|
|
pci_read_config_byte(pdev, 0x51, &mcr2);
|
|
if (mcr2 & 0x80)
|
|
pci_write_config_byte(pdev, 0x51, mcr2 & ~0x80);
|
|
|
|
return ata_sff_prereset(link, deadline);
|
|
}
|
|
|
|
static const struct scsi_host_template hpt36x_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
/*
|
|
* Configuration for HPT366/68
|
|
*/
|
|
|
|
static struct ata_port_operations hpt366_port_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.prereset = hpt366_prereset,
|
|
.cable_detect = hpt36x_cable_detect,
|
|
.mode_filter = hpt366_filter,
|
|
.set_piomode = hpt366_set_piomode,
|
|
.set_dmamode = hpt366_set_dmamode,
|
|
};
|
|
|
|
/**
|
|
* hpt36x_init_chipset - common chip setup
|
|
* @dev: PCI device
|
|
*
|
|
* Perform the chip setup work that must be done at both init and
|
|
* resume time
|
|
*/
|
|
|
|
static void hpt36x_init_chipset(struct pci_dev *dev)
|
|
{
|
|
u8 mcr1;
|
|
|
|
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
|
|
pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
|
|
pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
|
|
|
|
/*
|
|
* Now we'll have to force both channels enabled if at least one
|
|
* of them has been enabled by BIOS...
|
|
*/
|
|
pci_read_config_byte(dev, 0x50, &mcr1);
|
|
if (mcr1 & 0x30)
|
|
pci_write_config_byte(dev, 0x50, mcr1 | 0x30);
|
|
}
|
|
|
|
/**
|
|
* hpt36x_init_one - Initialise an HPT366/368
|
|
* @dev: PCI device
|
|
* @id: Entry in match table
|
|
*
|
|
* Initialise an HPT36x device. There are some interesting complications
|
|
* here. Firstly the chip may report 366 and be one of several variants.
|
|
* Secondly all the timings depend on the clock for the chip which we must
|
|
* detect and look up
|
|
*
|
|
* This is the known chip mappings. It may be missing a couple of later
|
|
* releases.
|
|
*
|
|
* Chip version PCI Rev Notes
|
|
* HPT366 4 (HPT366) 0 UDMA66
|
|
* HPT366 4 (HPT366) 1 UDMA66
|
|
* HPT368 4 (HPT366) 2 UDMA66
|
|
* HPT37x/30x 4 (HPT366) 3+ Other driver
|
|
*
|
|
*/
|
|
|
|
static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info_hpt366 = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA4,
|
|
.port_ops = &hpt366_port_ops
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
|
|
|
|
const void *hpriv = NULL;
|
|
u32 reg1;
|
|
int rc;
|
|
|
|
rc = pcim_enable_device(dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* May be a later chip in disguise. Check */
|
|
/* Newer chips are not in the HPT36x driver. Ignore them */
|
|
if (dev->revision > 2)
|
|
return -ENODEV;
|
|
|
|
hpt36x_init_chipset(dev);
|
|
|
|
pci_read_config_dword(dev, 0x40, ®1);
|
|
|
|
/* PCI clocking determines the ATA timing values to use */
|
|
/* info_hpt366 is safe against re-entry so we can scribble on it */
|
|
switch ((reg1 & 0xf00) >> 8) {
|
|
case 9:
|
|
hpriv = &hpt366_40;
|
|
break;
|
|
case 5:
|
|
hpriv = &hpt366_25;
|
|
break;
|
|
default:
|
|
hpriv = &hpt366_33;
|
|
break;
|
|
}
|
|
/* Now kick off ATA set up */
|
|
return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, (void *)hpriv, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int hpt36x_reinit_one(struct pci_dev *dev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(dev);
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(dev);
|
|
if (rc)
|
|
return rc;
|
|
hpt36x_init_chipset(dev);
|
|
ata_host_resume(host);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct pci_device_id hpt36x[] = {
|
|
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver hpt36x_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = hpt36x,
|
|
.probe = hpt36x_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = hpt36x_reinit_one,
|
|
#endif
|
|
};
|
|
|
|
module_pci_driver(hpt36x_pci_driver);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for the Highpoint HPT366/368");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, hpt36x);
|
|
MODULE_VERSION(DRV_VERSION);
|