mirror of
https://github.com/torvalds/linux.git
synced 2024-12-21 02:21:36 +00:00
46e130d298
Most of the ASM sleep code (in arch/arm/mach-omap2/sleep34xx.S) is copied to internal SRAM at boot and after wake-up from CORE OFF mode. However only a small part of the code really needs to run from internal SRAM. This fix lets most of the ASM idle code run from the DDR in order to minimize the SRAM usage and the overhead in the code copy. The only pieces of code that are mandatory in SRAM are: - the i443 erratum WA, - the i581 erratum WA, - the security extension code. SRAM usage: - original code: . 560 bytes for omap3_sram_configure_core_dpll (used by DVFS), . 852 bytes for omap_sram_idle (used by suspend/resume in RETention), . 124 bytes for es3_sdrc_fix (used by suspend/resume in OFF mode on ES3.x), . 108 bytes for save_secure_ram_context (used on HS parts only). With this fix the usage for suspend/resume in RETention goes down 288 bytes, so the gain in SRAM usage for suspend/resume is 564 bytes. Also fixed the SRAM initialization sequence to avoid an unnecessary copy to SRAM at boot time and for readability. Tested on Beagleboard (ES2.x) in idle with full RET and OFF modes. Kevin Hilman tested retention and off on 3430/n900, 3530/Overo and 3630/Zoom3 Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
423 lines
12 KiB
C
423 lines
12 KiB
C
/*
|
|
* linux/arch/arm/plat-omap/sram.c
|
|
*
|
|
* OMAP SRAM detection and management
|
|
*
|
|
* Copyright (C) 2005 Nokia Corporation
|
|
* Written by Tony Lindgren <tony@atomide.com>
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments
|
|
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/omapfb.h>
|
|
|
|
#include <asm/tlb.h>
|
|
#include <asm/cacheflush.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <plat/sram.h>
|
|
#include <plat/board.h>
|
|
#include <plat/cpu.h>
|
|
#include <plat/vram.h>
|
|
|
|
#include "sram.h"
|
|
#include "fb.h"
|
|
|
|
/* XXX These "sideways" includes are a sign that something is wrong */
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
# include "../mach-omap2/prm2xxx_3xxx.h"
|
|
# include "../mach-omap2/sdrc.h"
|
|
#endif
|
|
|
|
#define OMAP1_SRAM_PA 0x20000000
|
|
#define OMAP1_SRAM_VA VMALLOC_END
|
|
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
|
|
#define OMAP2_SRAM_VA 0xfe400000
|
|
#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
|
|
#define OMAP3_SRAM_VA 0xfe400000
|
|
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
|
|
#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
|
|
#define OMAP4_SRAM_VA 0xfe400000
|
|
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
|
|
#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
|
|
|
|
#if defined(CONFIG_ARCH_OMAP2PLUS)
|
|
#define SRAM_BOOTLOADER_SZ 0x00
|
|
#else
|
|
#define SRAM_BOOTLOADER_SZ 0x80
|
|
#endif
|
|
|
|
#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
|
|
#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
|
|
#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
|
|
|
|
#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
|
|
#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
|
|
#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
|
|
#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
|
|
#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
|
|
|
|
#define GP_DEVICE 0x300
|
|
|
|
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
|
|
|
|
static unsigned long omap_sram_start;
|
|
static unsigned long omap_sram_base;
|
|
static unsigned long omap_sram_size;
|
|
static unsigned long omap_sram_ceil;
|
|
|
|
/*
|
|
* Depending on the target RAMFS firewall setup, the public usable amount of
|
|
* SRAM varies. The default accessible size for all device types is 2k. A GP
|
|
* device allows ARM11 but not other initiators for full size. This
|
|
* functionality seems ok until some nice security API happens.
|
|
*/
|
|
static int is_sram_locked(void)
|
|
{
|
|
if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
|
|
/* RAMFW: R/W access to all initiators for all qualifier sets */
|
|
if (cpu_is_omap242x()) {
|
|
__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
|
|
__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
|
|
__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
|
|
}
|
|
if (cpu_is_omap34xx()) {
|
|
__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
|
|
__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
|
|
__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
|
|
__raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
|
|
__raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
|
|
}
|
|
return 0;
|
|
} else
|
|
return 1; /* assume locked with no PPA or security driver */
|
|
}
|
|
|
|
/*
|
|
* The amount of SRAM depends on the core type.
|
|
* Note that we cannot try to test for SRAM here because writes
|
|
* to secure SRAM will hang the system. Also the SRAM is not
|
|
* yet mapped at this point.
|
|
*/
|
|
static void __init omap_detect_sram(void)
|
|
{
|
|
unsigned long reserved;
|
|
|
|
if (cpu_class_is_omap2()) {
|
|
if (is_sram_locked()) {
|
|
if (cpu_is_omap34xx()) {
|
|
omap_sram_base = OMAP3_SRAM_PUB_VA;
|
|
omap_sram_start = OMAP3_SRAM_PUB_PA;
|
|
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
|
|
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
|
|
omap_sram_size = 0x7000; /* 28K */
|
|
} else {
|
|
omap_sram_size = 0x8000; /* 32K */
|
|
}
|
|
} else if (cpu_is_omap44xx()) {
|
|
omap_sram_base = OMAP4_SRAM_PUB_VA;
|
|
omap_sram_start = OMAP4_SRAM_PUB_PA;
|
|
omap_sram_size = 0xa000; /* 40K */
|
|
} else {
|
|
omap_sram_base = OMAP2_SRAM_PUB_VA;
|
|
omap_sram_start = OMAP2_SRAM_PUB_PA;
|
|
omap_sram_size = 0x800; /* 2K */
|
|
}
|
|
} else {
|
|
if (cpu_is_omap34xx()) {
|
|
omap_sram_base = OMAP3_SRAM_VA;
|
|
omap_sram_start = OMAP3_SRAM_PA;
|
|
omap_sram_size = 0x10000; /* 64K */
|
|
} else if (cpu_is_omap44xx()) {
|
|
omap_sram_base = OMAP4_SRAM_VA;
|
|
omap_sram_start = OMAP4_SRAM_PA;
|
|
omap_sram_size = 0xe000; /* 56K */
|
|
} else {
|
|
omap_sram_base = OMAP2_SRAM_VA;
|
|
omap_sram_start = OMAP2_SRAM_PA;
|
|
if (cpu_is_omap242x())
|
|
omap_sram_size = 0xa0000; /* 640K */
|
|
else if (cpu_is_omap243x())
|
|
omap_sram_size = 0x10000; /* 64K */
|
|
}
|
|
}
|
|
} else {
|
|
omap_sram_base = OMAP1_SRAM_VA;
|
|
omap_sram_start = OMAP1_SRAM_PA;
|
|
|
|
if (cpu_is_omap7xx())
|
|
omap_sram_size = 0x32000; /* 200K */
|
|
else if (cpu_is_omap15xx())
|
|
omap_sram_size = 0x30000; /* 192K */
|
|
else if (cpu_is_omap1610() || cpu_is_omap1621() ||
|
|
cpu_is_omap1710())
|
|
omap_sram_size = 0x4000; /* 16K */
|
|
else if (cpu_is_omap1611())
|
|
omap_sram_size = SZ_256K;
|
|
else {
|
|
pr_err("Could not detect SRAM size\n");
|
|
omap_sram_size = 0x4000;
|
|
}
|
|
}
|
|
reserved = omapfb_reserve_sram(omap_sram_start, omap_sram_base,
|
|
omap_sram_size,
|
|
omap_sram_start + SRAM_BOOTLOADER_SZ,
|
|
omap_sram_size - SRAM_BOOTLOADER_SZ);
|
|
omap_sram_size -= reserved;
|
|
|
|
reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
|
|
omap_sram_size,
|
|
omap_sram_start + SRAM_BOOTLOADER_SZ,
|
|
omap_sram_size - SRAM_BOOTLOADER_SZ);
|
|
omap_sram_size -= reserved;
|
|
|
|
omap_sram_ceil = omap_sram_base + omap_sram_size;
|
|
}
|
|
|
|
static struct map_desc omap_sram_io_desc[] __initdata = {
|
|
{ /* .length gets filled in at runtime */
|
|
.virtual = OMAP1_SRAM_VA,
|
|
.pfn = __phys_to_pfn(OMAP1_SRAM_PA),
|
|
.type = MT_MEMORY
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
|
|
*/
|
|
static void __init omap_map_sram(void)
|
|
{
|
|
unsigned long base;
|
|
|
|
if (omap_sram_size == 0)
|
|
return;
|
|
|
|
if (cpu_is_omap34xx()) {
|
|
/*
|
|
* SRAM must be marked as non-cached on OMAP3 since the
|
|
* CORE DPLL M2 divider change code (in SRAM) runs with the
|
|
* SDRAM controller disabled, and if it is marked cached,
|
|
* the ARM may attempt to write cache lines back to SDRAM
|
|
* which will cause the system to hang.
|
|
*/
|
|
omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
|
|
}
|
|
|
|
omap_sram_io_desc[0].virtual = omap_sram_base;
|
|
base = omap_sram_start;
|
|
base = ROUND_DOWN(base, PAGE_SIZE);
|
|
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
|
|
omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
|
|
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
|
|
|
|
pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
|
|
(long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
|
|
omap_sram_io_desc[0].virtual,
|
|
omap_sram_io_desc[0].length);
|
|
|
|
/*
|
|
* Normally devicemaps_init() would flush caches and tlb after
|
|
* mdesc->map_io(), but since we're called from map_io(), we
|
|
* must do it here.
|
|
*/
|
|
local_flush_tlb_all();
|
|
flush_cache_all();
|
|
|
|
/*
|
|
* Looks like we need to preserve some bootloader code at the
|
|
* beginning of SRAM for jumping to flash for reboot to work...
|
|
*/
|
|
memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
|
|
omap_sram_size - SRAM_BOOTLOADER_SZ);
|
|
}
|
|
|
|
/*
|
|
* Memory allocator for SRAM: calculates the new ceiling address
|
|
* for pushing a function using the fncpy API.
|
|
*
|
|
* Note that fncpy requires the returned address to be aligned
|
|
* to an 8-byte boundary.
|
|
*/
|
|
void *omap_sram_push_address(unsigned long size)
|
|
{
|
|
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
|
|
pr_err("Not enough space in SRAM\n");
|
|
return NULL;
|
|
}
|
|
|
|
omap_sram_ceil -= size;
|
|
omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
|
|
|
|
return (void *)omap_sram_ceil;
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
|
|
static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
|
|
|
|
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
|
|
{
|
|
BUG_ON(!_omap_sram_reprogram_clock);
|
|
_omap_sram_reprogram_clock(dpllctl, ckctl);
|
|
}
|
|
|
|
static int __init omap1_sram_init(void)
|
|
{
|
|
_omap_sram_reprogram_clock =
|
|
omap_sram_push(omap1_sram_reprogram_clock,
|
|
omap1_sram_reprogram_clock_sz);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define omap1_sram_init() do {} while (0)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_OMAP2)
|
|
|
|
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
|
|
u32 base_cs, u32 force_unlock);
|
|
|
|
void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
|
|
u32 base_cs, u32 force_unlock)
|
|
{
|
|
BUG_ON(!_omap2_sram_ddr_init);
|
|
_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
|
|
base_cs, force_unlock);
|
|
}
|
|
|
|
static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
|
|
u32 mem_type);
|
|
|
|
void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
|
|
{
|
|
BUG_ON(!_omap2_sram_reprogram_sdrc);
|
|
_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
|
|
}
|
|
|
|
static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
|
|
|
|
u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
|
|
{
|
|
BUG_ON(!_omap2_set_prcm);
|
|
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_OMAP2420
|
|
static int __init omap242x_sram_init(void)
|
|
{
|
|
_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
|
|
omap242x_sram_ddr_init_sz);
|
|
|
|
_omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
|
|
omap242x_sram_reprogram_sdrc_sz);
|
|
|
|
_omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
|
|
omap242x_sram_set_prcm_sz);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int omap242x_sram_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_OMAP2430
|
|
static int __init omap243x_sram_init(void)
|
|
{
|
|
_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
|
|
omap243x_sram_ddr_init_sz);
|
|
|
|
_omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
|
|
omap243x_sram_reprogram_sdrc_sz);
|
|
|
|
_omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
|
|
omap243x_sram_set_prcm_sz);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int omap243x_sram_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
|
|
static u32 (*_omap3_sram_configure_core_dpll)(
|
|
u32 m2, u32 unlock_dll, u32 f, u32 inc,
|
|
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
|
|
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
|
|
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
|
|
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
|
|
|
|
u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
|
|
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
|
|
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
|
|
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
|
|
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
|
|
{
|
|
BUG_ON(!_omap3_sram_configure_core_dpll);
|
|
return _omap3_sram_configure_core_dpll(
|
|
m2, unlock_dll, f, inc,
|
|
sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
|
|
sdrc_actim_ctrl_b_0, sdrc_mr_0,
|
|
sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
|
|
sdrc_actim_ctrl_b_1, sdrc_mr_1);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
void omap3_sram_restore_context(void)
|
|
{
|
|
omap_sram_ceil = omap_sram_base + omap_sram_size;
|
|
|
|
_omap3_sram_configure_core_dpll =
|
|
omap_sram_push(omap3_sram_configure_core_dpll,
|
|
omap3_sram_configure_core_dpll_sz);
|
|
omap_push_sram_idle();
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
#endif /* CONFIG_ARCH_OMAP3 */
|
|
|
|
static inline int omap34xx_sram_init(void)
|
|
{
|
|
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
|
|
omap3_sram_restore_context();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int __init omap_sram_init(void)
|
|
{
|
|
omap_detect_sram();
|
|
omap_map_sram();
|
|
|
|
if (!(cpu_class_is_omap2()))
|
|
omap1_sram_init();
|
|
else if (cpu_is_omap242x())
|
|
omap242x_sram_init();
|
|
else if (cpu_is_omap2430())
|
|
omap243x_sram_init();
|
|
else if (cpu_is_omap34xx())
|
|
omap34xx_sram_init();
|
|
|
|
return 0;
|
|
}
|