linux/arch/powerpc/boot/dts/mpc8544ds.dtsi
Kumar Gala b7f817547d powerpc/85xx: Rework MPC8544DS device tree
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.

Other changes include:
* Moved to a standard 2 #address-cells & #size-cells at top-level
* Moved to specifying interrupt-parent for mpic at root
* Moved to 4-cell mpic interrupt cells to support MPIC timers
* Removed CPU properties setup by u-boot to match other .dts
* Added localbus node, but no chipselect details at this point
* Reworked PCIe nodes to allow supportin IRQs for controller (errors)
  and moved PCI device IRQs down to virtual bridge level
* Moved mdio nodes up one level instead of under tsec nodes
* Updated ethernet 'model' to 'eTSEC' as that's what on MPC8544
* Dropping "fsl,mpc8544-IP..." from compatibles for standard blocks

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24 02:01:36 -06:00

162 lines
4.3 KiB
Plaintext

/*
* MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_soc {
enet0: ethernet@24000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi0>;
phy-connection-type = "rgmii-id";
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <10 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <10 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
phy-handle = <&phy1>;
tbi-handle = <&tbi1>;
phy-connection-type = "rgmii-id";
};
mdio@26520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
&board_pci3 {
pcie@0 {
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
// IDSEL 0x1c USB
0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
// IDSEL 0x1d Audio
0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
// IDSEL 0x1e Legacy
0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
// IDSEL 0x1f IDE/SATA
0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
>;
uli1575@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0xb0000000
0x2000000 0x0 0xb0000000
0x0 0x100000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0
0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <9 2 0 0>;
interrupt-parent = <&mpic>;
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
keyboard@0 {
reg = <0x0>;
compatible = "pnpPNP,303";
};
mouse@1 {
reg = <0x1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
gpio@400 {
reg = <0x1 0x400 0x80>;
};
};
};
};
};