mirror of
https://github.com/torvalds/linux.git
synced 2024-11-07 04:32:03 +00:00
aa62f85d0c
(Updated to address Ben's comments. With regard to the message segment restriction it's not something we hit on the actual platform so while I will investigate that further I don't think its a blocker to submission. At worst its a spot over-restrictive) From: Wen Wang <wen.w.wang@intel.com> Initial release of the driver. Updated and verified on hardware. Cleaned up as follows Alan Cox: Squash down the switches into tables, and use the PCI ident field. We could perhaps take this further and put the platform and port number into this. uint32t -> u32 bracketing of case statements spacing and '!' usage Check the speed (which is now 0/1/2) is valid and ignore otherwise. Fix remaining problems/suggestions from Jean's review Fix items from Ben's review Arjan van de Ven: Initial power management hooks Yong Wang <youg.y.wang@intel.com>: Shared IRQ support Wen Wang <wen.w.wang@intel.com>: D3 support Fixes for OCT test runs Interrupt optimisations Hong Liu <hong.liu@intel.com> The runtime PM code is working on the wrong device (i2c_adapter->dev). The correct one should be pci_dev->dev. This breaks attached i2c slave devices with runtime PM enabled. Slave device needs to runtime resume parent device before runtime resuming itself, but we always get error since we don't have pm_runtime callback for i2c_adapter->dev. Bin Yang <bin.yang@intel.com>: Update speed table Saadi Maalem <saadi.maalem@intel.com>: Clear all interrupts in the hardware init Celine Chotard <celinex.chotard@intel.com>: Correct ordering of clear/disable of IRQs Signed-off-by: Wen Wang <wen.w.wang@intel.com> Signed-off-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Bin Yang <bin.yang@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
81 lines
2.9 KiB
Makefile
81 lines
2.9 KiB
Makefile
#
|
|
# Makefile for the i2c bus drivers.
|
|
#
|
|
|
|
# ACPI drivers
|
|
obj-$(CONFIG_I2C_SCMI) += i2c-scmi.o
|
|
|
|
# PC SMBus host controller drivers
|
|
obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o
|
|
obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o
|
|
obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o
|
|
obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
|
|
obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o
|
|
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
|
|
obj-$(CONFIG_I2C_I801) += i2c-i801.o
|
|
obj-$(CONFIG_I2C_ISCH) += i2c-isch.o
|
|
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
|
|
obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o
|
|
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
|
|
obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
|
|
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
|
|
obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
|
|
obj-$(CONFIG_I2C_VIA) += i2c-via.o
|
|
obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
|
|
|
|
# Mac SMBus host controller drivers
|
|
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
|
|
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
|
|
|
|
# Embedded system I2C/SMBus host controller drivers
|
|
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
|
|
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
|
|
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
|
|
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
|
|
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
|
|
obj-$(CONFIG_I2C_DESIGNWARE) += i2c-designware.o
|
|
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
|
|
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
|
|
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
|
|
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
|
|
obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o
|
|
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
|
|
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
|
|
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
|
|
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
|
|
obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o
|
|
obj-$(CONFIG_I2C_NUC900) += i2c-nuc900.o
|
|
obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
|
|
obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
|
|
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
|
|
obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
|
|
obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
|
|
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
|
|
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
|
|
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
|
|
obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
|
|
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
|
|
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
|
|
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
|
|
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
|
|
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
|
|
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
|
|
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
|
|
|
|
# External I2C/SMBus adapter drivers
|
|
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
|
|
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
|
|
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
|
|
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
|
|
|
|
# Other I2C/SMBus bus drivers
|
|
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
|
|
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
|
|
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
|
|
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
|
|
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
|
|
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
|
|
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
|
|
|
|
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
|