linux/drivers/media/dvb/dvb-usb/gp8psk.h
VDR User 9e21ccaa69 [media] dvb-usb-gp8psk: get firmware and fpga versions
This patch adds retrieval of firmware and FPGA versions of Genpix devices.
That information is useful for users who experience performance differences
with the various firmware versions, and may want to use a specific firmware
that best suits their needs.

Example dmesg output:
gp8psk: FW Version = 2.09.4 (0x20904)  Build 2009/04/02
gp8psk: FPGA Version = 1

Signed-off-by: Derek Kelly <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29 08:16:38 -02:00

104 lines
4.0 KiB
C

/* DVB USB compliant Linux driver for the
* - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
*
* Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
* Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
*
* Thanks to GENPIX for the sample code used to implement this module.
*
* This module is based off the vp7045 and vp702x modules
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
#ifndef _DVB_USB_GP8PSK_H_
#define _DVB_USB_GP8PSK_H_
#define DVB_USB_LOG_PREFIX "gp8psk"
#include "dvb-usb.h"
extern int dvb_usb_gp8psk_debug;
#define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args)
#define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args)
#define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args)
#define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args)
/* Twinhan Vendor requests */
#define TH_COMMAND_IN 0xC0
#define TH_COMMAND_OUT 0xC1
/* gp8psk commands */
#define GET_8PSK_CONFIG 0x80 /* in */
#define SET_8PSK_CONFIG 0x81
#define I2C_WRITE 0x83
#define I2C_READ 0x84
#define ARM_TRANSFER 0x85
#define TUNE_8PSK 0x86
#define GET_SIGNAL_STRENGTH 0x87 /* in */
#define LOAD_BCM4500 0x88
#define BOOT_8PSK 0x89 /* in */
#define START_INTERSIL 0x8A /* in */
#define SET_LNB_VOLTAGE 0x8B
#define SET_22KHZ_TONE 0x8C
#define SEND_DISEQC_COMMAND 0x8D
#define SET_DVB_MODE 0x8E
#define SET_DN_SWITCH 0x8F
#define GET_SIGNAL_LOCK 0x90 /* in */
#define GET_FW_VERS 0x92
#define GET_SERIAL_NUMBER 0x93 /* in */
#define USE_EXTRA_VOLT 0x94
#define GET_FPGA_VERS 0x95
#define CW3K_INIT 0x9d
/* PSK_configuration bits */
#define bm8pskStarted 0x01
#define bm8pskFW_Loaded 0x02
#define bmIntersilOn 0x04
#define bmDVBmode 0x08
#define bm22kHz 0x10
#define bmSEL18V 0x20
#define bmDCtuned 0x40
#define bmArmed 0x80
/* Satellite modulation modes */
#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */
#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */
#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */
#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */
#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */
#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */
#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */
#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */
#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */
#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */
#define GET_USB_SPEED 0x07
#define USB_SPEED_LOW 0
#define USB_SPEED_FULL 1
#define USB_SPEED_HIGH 2
#define RESET_FX2 0x13
#define FW_VERSION_READ 0x0B
#define VENDOR_STRING_READ 0x0C
#define PRODUCT_STRING_READ 0x0D
#define FW_BCD_VERSION_READ 0x14
/* firmware revision id's */
#define GP8PSK_FW_REV1 0x020604
#define GP8PSK_FW_REV2 0x020704
#define GP8PSK_FW_VERS(_fw_vers) ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0])
extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
u16 index, u8 *b, int blen);
extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d);
#endif