linux/drivers/video/aty/radeon_i2c.c
Dennis Munsie 7a45093b7c [PATCH] radeonfb: Use generic DDC reading
Uses the generic ddc read functionality in fbmon.c instead of the previous
functionality.

Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:10 -07:00

165 lines
3.9 KiB
C

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
#include <asm/io.h>
#include <video/radeon.h>
#include "radeonfb.h"
#include "../edid.h"
static void radeon_gpio_setscl(void* data, int state)
{
struct radeon_i2c_chan *chan = data;
struct radeonfb_info *rinfo = chan->rinfo;
u32 val;
val = INREG(chan->ddc_reg) & ~(VGA_DDC_CLK_OUT_EN);
if (!state)
val |= VGA_DDC_CLK_OUT_EN;
OUTREG(chan->ddc_reg, val);
(void)INREG(chan->ddc_reg);
}
static void radeon_gpio_setsda(void* data, int state)
{
struct radeon_i2c_chan *chan = data;
struct radeonfb_info *rinfo = chan->rinfo;
u32 val;
val = INREG(chan->ddc_reg) & ~(VGA_DDC_DATA_OUT_EN);
if (!state)
val |= VGA_DDC_DATA_OUT_EN;
OUTREG(chan->ddc_reg, val);
(void)INREG(chan->ddc_reg);
}
static int radeon_gpio_getscl(void* data)
{
struct radeon_i2c_chan *chan = data;
struct radeonfb_info *rinfo = chan->rinfo;
u32 val;
val = INREG(chan->ddc_reg);
return (val & VGA_DDC_CLK_INPUT) ? 1 : 0;
}
static int radeon_gpio_getsda(void* data)
{
struct radeon_i2c_chan *chan = data;
struct radeonfb_info *rinfo = chan->rinfo;
u32 val;
val = INREG(chan->ddc_reg);
return (val & VGA_DDC_DATA_INPUT) ? 1 : 0;
}
static int radeon_setup_i2c_bus(struct radeon_i2c_chan *chan, const char *name)
{
int rc;
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
chan->adapter.id = I2C_HW_B_RADEON;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->rinfo->pdev->dev;
chan->algo.setsda = radeon_gpio_setsda;
chan->algo.setscl = radeon_gpio_setscl;
chan->algo.getsda = radeon_gpio_getsda;
chan->algo.getscl = radeon_gpio_getscl;
chan->algo.udelay = 40;
chan->algo.timeout = 20;
chan->algo.data = chan;
i2c_set_adapdata(&chan->adapter, chan);
/* Raise SCL and SDA */
radeon_gpio_setsda(chan, 1);
radeon_gpio_setscl(chan, 1);
udelay(20);
rc = i2c_bit_add_bus(&chan->adapter);
if (rc == 0)
dev_dbg(&chan->rinfo->pdev->dev, "I2C bus %s registered.\n", name);
else
dev_warn(&chan->rinfo->pdev->dev, "Failed to register I2C bus %s.\n", name);
return rc;
}
void radeon_create_i2c_busses(struct radeonfb_info *rinfo)
{
rinfo->i2c[0].rinfo = rinfo;
rinfo->i2c[0].ddc_reg = GPIO_MONID;
radeon_setup_i2c_bus(&rinfo->i2c[0], "monid");
rinfo->i2c[1].rinfo = rinfo;
rinfo->i2c[1].ddc_reg = GPIO_DVI_DDC;
radeon_setup_i2c_bus(&rinfo->i2c[1], "dvi");
rinfo->i2c[2].rinfo = rinfo;
rinfo->i2c[2].ddc_reg = GPIO_VGA_DDC;
radeon_setup_i2c_bus(&rinfo->i2c[2], "vga");
rinfo->i2c[3].rinfo = rinfo;
rinfo->i2c[3].ddc_reg = GPIO_CRT2_DDC;
radeon_setup_i2c_bus(&rinfo->i2c[3], "crt2");
}
void radeon_delete_i2c_busses(struct radeonfb_info *rinfo)
{
if (rinfo->i2c[0].rinfo)
i2c_bit_del_bus(&rinfo->i2c[0].adapter);
rinfo->i2c[0].rinfo = NULL;
if (rinfo->i2c[1].rinfo)
i2c_bit_del_bus(&rinfo->i2c[1].adapter);
rinfo->i2c[1].rinfo = NULL;
if (rinfo->i2c[2].rinfo)
i2c_bit_del_bus(&rinfo->i2c[2].adapter);
rinfo->i2c[2].rinfo = NULL;
if (rinfo->i2c[3].rinfo)
i2c_bit_del_bus(&rinfo->i2c[3].adapter);
rinfo->i2c[3].rinfo = NULL;
}
int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, int conn,
u8 **out_edid)
{
u8 *edid = fb_ddc_read(&rinfo->i2c[conn-1].adapter);
if (out_edid)
*out_edid = edid;
if (!edid) {
RTRACE("radeonfb: I2C (port %d) ... not found\n", conn);
return MT_NONE;
}
if (edid[0x14] & 0x80) {
/* Fix detection using BIOS tables */
if (rinfo->is_mobility /*&& conn == ddc_dvi*/ &&
(INREG(LVDS_GEN_CNTL) & LVDS_ON)) {
RTRACE("radeonfb: I2C (port %d) ... found LVDS panel\n", conn);
return MT_LCD;
} else {
RTRACE("radeonfb: I2C (port %d) ... found TMDS panel\n", conn);
return MT_DFP;
}
}
RTRACE("radeonfb: I2C (port %d) ... found CRT display\n", conn);
return MT_CRT;
}