mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 02:23:16 +00:00
311a68a51a
For fixed regulator, setting .n_voltages = 1 and .fixed_uV is enough, no need to set .min_uV and .list_volage. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
187 lines
4.4 KiB
C
187 lines
4.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (C) STMicroelectronics 2019
|
|
// Authors: Gabriel Fernandez <gabriel.fernandez@st.com>
|
|
// Pascal Paillet <p.paillet@st.com>.
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
/*
|
|
* Registers description
|
|
*/
|
|
#define REG_PWR_CR3 0x0C
|
|
|
|
#define USB_3_3_EN BIT(24)
|
|
#define USB_3_3_RDY BIT(26)
|
|
#define REG_1_8_EN BIT(28)
|
|
#define REG_1_8_RDY BIT(29)
|
|
#define REG_1_1_EN BIT(30)
|
|
#define REG_1_1_RDY BIT(31)
|
|
|
|
/* list of supported regulators */
|
|
enum {
|
|
PWR_REG11,
|
|
PWR_REG18,
|
|
PWR_USB33,
|
|
STM32PWR_REG_NUM_REGS
|
|
};
|
|
|
|
static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {
|
|
[PWR_REG11] = REG_1_1_RDY,
|
|
[PWR_REG18] = REG_1_8_RDY,
|
|
[PWR_USB33] = USB_3_3_RDY,
|
|
};
|
|
|
|
struct stm32_pwr_reg {
|
|
void __iomem *base;
|
|
u32 ready_mask;
|
|
};
|
|
|
|
static int stm32_pwr_reg_is_ready(struct regulator_dev *rdev)
|
|
{
|
|
struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
|
|
u32 val;
|
|
|
|
val = readl_relaxed(priv->base + REG_PWR_CR3);
|
|
|
|
return (val & priv->ready_mask);
|
|
}
|
|
|
|
static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
|
|
u32 val;
|
|
|
|
val = readl_relaxed(priv->base + REG_PWR_CR3);
|
|
|
|
return (val & rdev->desc->enable_mask);
|
|
}
|
|
|
|
static int stm32_pwr_reg_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
|
|
int ret;
|
|
u32 val;
|
|
|
|
val = readl_relaxed(priv->base + REG_PWR_CR3);
|
|
val |= rdev->desc->enable_mask;
|
|
writel_relaxed(val, priv->base + REG_PWR_CR3);
|
|
|
|
/* use an arbitrary timeout of 20ms */
|
|
ret = readx_poll_timeout(stm32_pwr_reg_is_ready, rdev, val, val,
|
|
100, 20 * 1000);
|
|
if (ret)
|
|
dev_err(&rdev->dev, "regulator enable timed out!\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_pwr_reg_disable(struct regulator_dev *rdev)
|
|
{
|
|
struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
|
|
int ret;
|
|
u32 val;
|
|
|
|
val = readl_relaxed(priv->base + REG_PWR_CR3);
|
|
val &= ~rdev->desc->enable_mask;
|
|
writel_relaxed(val, priv->base + REG_PWR_CR3);
|
|
|
|
/* use an arbitrary timeout of 20ms */
|
|
ret = readx_poll_timeout(stm32_pwr_reg_is_ready, rdev, val, !val,
|
|
100, 20 * 1000);
|
|
if (ret)
|
|
dev_err(&rdev->dev, "regulator disable timed out!\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct regulator_ops stm32_pwr_reg_ops = {
|
|
.enable = stm32_pwr_reg_enable,
|
|
.disable = stm32_pwr_reg_disable,
|
|
.is_enabled = stm32_pwr_reg_is_enabled,
|
|
};
|
|
|
|
#define PWR_REG(_id, _name, _volt, _en, _supply) \
|
|
[_id] = { \
|
|
.id = _id, \
|
|
.name = _name, \
|
|
.of_match = of_match_ptr(_name), \
|
|
.n_voltages = 1, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.fixed_uV = _volt, \
|
|
.ops = &stm32_pwr_reg_ops, \
|
|
.enable_mask = _en, \
|
|
.owner = THIS_MODULE, \
|
|
.supply_name = _supply, \
|
|
} \
|
|
|
|
static const struct regulator_desc stm32_pwr_desc[] = {
|
|
PWR_REG(PWR_REG11, "reg11", 1100000, REG_1_1_EN, "vdd"),
|
|
PWR_REG(PWR_REG18, "reg18", 1800000, REG_1_8_EN, "vdd"),
|
|
PWR_REG(PWR_USB33, "usb33", 3300000, USB_3_3_EN, "vdd_3v3_usbfs"),
|
|
};
|
|
|
|
static int stm32_pwr_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct stm32_pwr_reg *priv;
|
|
void __iomem *base;
|
|
struct regulator_dev *rdev;
|
|
struct regulator_config config = { };
|
|
int i, ret = 0;
|
|
|
|
base = of_iomap(np, 0);
|
|
if (!base) {
|
|
dev_err(&pdev->dev, "Unable to map IO memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
config.dev = &pdev->dev;
|
|
|
|
for (i = 0; i < STM32PWR_REG_NUM_REGS; i++) {
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(struct stm32_pwr_reg),
|
|
GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
priv->base = base;
|
|
priv->ready_mask = ready_mask_table[i];
|
|
config.driver_data = priv;
|
|
|
|
rdev = devm_regulator_register(&pdev->dev,
|
|
&stm32_pwr_desc[i],
|
|
&config);
|
|
if (IS_ERR(rdev)) {
|
|
ret = PTR_ERR(rdev);
|
|
dev_err(&pdev->dev,
|
|
"Failed to register regulator: %d\n", ret);
|
|
break;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id stm32_pwr_of_match[] = {
|
|
{ .compatible = "st,stm32mp1,pwr-reg", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm32_pwr_of_match);
|
|
|
|
static struct platform_driver stm32_pwr_driver = {
|
|
.probe = stm32_pwr_regulator_probe,
|
|
.driver = {
|
|
.name = "stm32-pwr-regulator",
|
|
.of_match_table = of_match_ptr(stm32_pwr_of_match),
|
|
},
|
|
};
|
|
module_platform_driver(stm32_pwr_driver);
|
|
|
|
MODULE_DESCRIPTION("STM32MP1 PWR voltage regulator driver");
|
|
MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
|
|
MODULE_LICENSE("GPL v2");
|