linux/include/drm/drm_modes.h
Linus Torvalds faa392181a drm pull for 5.8-rc1
core:
 - uapi: error out EBUSY when existing master
 - uapi: rework SET/DROP MASTER permission handling
 - remove drm_pci.h
 - drm_pci* are now legacy
 - introduced managed DRM resources
 - subclassing support for drm_framebuffer
 - simple encoder helper
 - edid improvements
 - vblank + writeback documentation improved
 - drm/mm - optimise tree searches
 - port drivers to use devm_drm_dev_alloc
 
 dma-buf:
 - add flag for p2p buffer support
 
 mst:
 - ACT timeout improvements
 - remove drm_dp_mst_has_audio
 - don't use 2nd TX slot - spec recommends against it
 
 bridge:
 - dw-hdmi various improvements
 - chrontel ch7033 support
 - fix stack issues with old gcc
 
 hdmi:
 - add unpack function for drm infoframe
 
 fbdev:
 - misc fbdev driver fixes
 
 i915:
 - uapi: global sseu pinning
 - uapi: OA buffer polling
 - uapi: remove generated perf code
 - uapi: per-engine default property values in sysfs
 - Tigerlake GEN12 enabled.
 - Lots of gem refactoring
 - Tigerlake enablement patches
 - move to drm_device logging
 - Icelake gamma HW readout
 - push MST link retrain to hotplug work
 - bandwidth atomic helpers
 - ICL fixes
 - RPS/GT refactoring
 - Cherryview full-ppgtt support
 - i915 locking guidelines documented
 - require linear fb stride to be 512 multiple on gen9
 - Tigerlake SAGV support
 
 amdgpu:
 - uapi: encrypted GPU memory handling
 - uapi: add MEM_SYNC IB flag
 - p2p dma-buf support
 - export VRAM dma-bufs
 - FRU chip access support
 - RAS/SR-IOV updates
 - Powerplay locking fixes
 - VCN DPG (powergating) enablement
 - GFX10 clockgating fixes
 - DC fixes
 - GPU reset fixes
 - navi SDMA fix
 - expose FP16 for modesetting
 - DP 1.4 compliance fixes
 - gfx10 soft recovery
 - Improved Critical Thermal Faults handling
 - resizable BAR on gmc10
 
 amdkfd:
 - uapi: GWS resource management
 - track GPU memory per process
 - report PCI domain in topology
 
 radeon:
 - safe reg list generator fixes
 
 nouveau:
 - HD audio fixes on recent systems
 - vGPU detection (fail probe if we're on one, for now)
 - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
 - SVM improvements/fixes
 - NVIDIA format modifier support
 - Misc other fixes.
 
 adv7511:
 - HDMI SPDIF support
 
 ast:
 - allocate crtc state size
 - fix double assignment
 - fix suspend
 
 bochs:
 - drop connector register
 
 cirrus:
 - move to tiny drivers.
 
 exynos:
 - fix imported dma-buf mapping
 - enable runtime PM
 - fixes and cleanups
 
 mediatek:
 - DPI pin mode swap
 - config mipi_tx current/impedance
 
 lima:
 - devfreq + cooling device support
 - task handling improvements
 - runtime PM support
 
 pl111:
 - vexpress init improvements
 - fix module auto-load
 
 rcar-du:
 - DT bindings conversion to YAML
 - Planes zpos sanity check and fix
 - MAINTAINERS entry for LVDS panel driver
 
 mcde:
 - fix return value
 
 mgag200:
 - use managed config init
 
 stm:
 - read endpoints from DT
 
 vboxvideo:
 - use PCI managed functions
 - drop WC mtrr
 
 vkms:
 - enable cursor by default
 
 rockchip:
 - afbc support
 
 virtio:
 - various cleanups
 
 qxl:
 - fix cursor notify port
 
 hisilicon:
 - 128-byte stride alignment fix
 
 sun4i:
 - improved format handling
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJe1edsAAoJEAx081l5xIa+bKEQAJAZv/8OMM2rx+p+GyKgrNpl
 ihTX/oyToy8dw97s1kWF7V5kKU+qjF8aWlKoPS0xovzaMAzYSFz9FRNEUgqtTXMI
 zIAzSXioqP21oL9/ZTHcXDULtz8Gk3uiPomgXMWLlNBdt3X5qvCwsmPRIYSwG0GJ
 00VCvxDbVxGSM3wzcvbfyRwHCq3SrFvIusXv5jHnnxEFGH0C7Mj2/FLYMKLNjvli
 Q8VEI2wQPZj1QdA8fLFVneIQsR6YUSko9OfFMANP8VJGpPMnUkvVxTJ5ACGJspvn
 U/h6NYqJeUU2Y3BSKqtjIC3a1LY51tp5tL9q4H9TD1hqMckt6F2V7T2IeFU8i6+V
 YzUsSiT4q1xB+uiFVcgopx2hyIp8INOEyWrVdYgw2JviROeRD+pDHvJd13ZNMnTe
 GvLWQ/PfBFrcz8eligjiYjOf66ZTU+j/rivaOBFyrs9gdlsaEW2QRurFrcNX+0lZ
 kDbLsIFjhYnPXsvHP87x4BuQCKQIEh8wWuxXuJjunBPdqVrJyltZWbBiKO571b5/
 BtX6xj6ztUOffR2RdiVanzY546I2hEi7SHMUuWnMqXsOV46GBN0QvlpZad/47n9x
 ZUy8HDDD0/qWuGwvPOJGIeAnUteWge9AhWXTeN5+1h5m+QEOzYkPKqC3Hp8TW1pM
 gToTWgAhnu731fhzLWyt
 =H7IS
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Highlights:

   - Core DRM had a lot of refactoring around managed drm resources to
     make drivers simpler.

   - Intel Tigerlake support is on by default

   - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory

  Details:

  core:
   - uapi: error out EBUSY when existing master
   - uapi: rework SET/DROP MASTER permission handling
   - remove drm_pci.h
   - drm_pci* are now legacy
   - introduced managed DRM resources
   - subclassing support for drm_framebuffer
   - simple encoder helper
   - edid improvements
   - vblank + writeback documentation improved
   - drm/mm - optimise tree searches
   - port drivers to use devm_drm_dev_alloc

  dma-buf:
   - add flag for p2p buffer support

  mst:
   - ACT timeout improvements
   - remove drm_dp_mst_has_audio
   - don't use 2nd TX slot - spec recommends against it

  bridge:
   - dw-hdmi various improvements
   - chrontel ch7033 support
   - fix stack issues with old gcc

  hdmi:
   - add unpack function for drm infoframe

  fbdev:
   - misc fbdev driver fixes

  i915:
   - uapi: global sseu pinning
   - uapi: OA buffer polling
   - uapi: remove generated perf code
   - uapi: per-engine default property values in sysfs
   - Tigerlake GEN12 enabled.
   - Lots of gem refactoring
   - Tigerlake enablement patches
   - move to drm_device logging
   - Icelake gamma HW readout
   - push MST link retrain to hotplug work
   - bandwidth atomic helpers
   - ICL fixes
   - RPS/GT refactoring
   - Cherryview full-ppgtt support
   - i915 locking guidelines documented
   - require linear fb stride to be 512 multiple on gen9
   - Tigerlake SAGV support

  amdgpu:
   - uapi: encrypted GPU memory handling
   - uapi: add MEM_SYNC IB flag
   - p2p dma-buf support
   - export VRAM dma-bufs
   - FRU chip access support
   - RAS/SR-IOV updates
   - Powerplay locking fixes
   - VCN DPG (powergating) enablement
   - GFX10 clockgating fixes
   - DC fixes
   - GPU reset fixes
   - navi SDMA fix
   - expose FP16 for modesetting
   - DP 1.4 compliance fixes
   - gfx10 soft recovery
   - Improved Critical Thermal Faults handling
   - resizable BAR on gmc10

  amdkfd:
   - uapi: GWS resource management
   - track GPU memory per process
   - report PCI domain in topology

  radeon:
   - safe reg list generator fixes

  nouveau:
   - HD audio fixes on recent systems
   - vGPU detection (fail probe if we're on one, for now)
   - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
   - SVM improvements/fixes
   - NVIDIA format modifier support
   - Misc other fixes.

  adv7511:
   - HDMI SPDIF support

  ast:
   - allocate crtc state size
   - fix double assignment
   - fix suspend

  bochs:
   - drop connector register

  cirrus:
   - move to tiny drivers.

  exynos:
   - fix imported dma-buf mapping
   - enable runtime PM
   - fixes and cleanups

  mediatek:
   - DPI pin mode swap
   - config mipi_tx current/impedance

  lima:
   - devfreq + cooling device support
   - task handling improvements
   - runtime PM support

  pl111:
   - vexpress init improvements
   - fix module auto-load

  rcar-du:
   - DT bindings conversion to YAML
   - Planes zpos sanity check and fix
   - MAINTAINERS entry for LVDS panel driver

  mcde:
   - fix return value

  mgag200:
   - use managed config init

  stm:
   - read endpoints from DT

  vboxvideo:
   - use PCI managed functions
   - drop WC mtrr

  vkms:
   - enable cursor by default

  rockchip:
   - afbc support

  virtio:
   - various cleanups

  qxl:
   - fix cursor notify port

  hisilicon:
   - 128-byte stride alignment fix

  sun4i:
   - improved format handling"

* tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits)
  drm/amd/display: Fix potential integer wraparound resulting in a hang
  drm/amd/display: drop cursor position check in atomic test
  drm/amdgpu: fix device attribute node create failed with multi gpu
  drm/nouveau: use correct conflicting framebuffer API
  drm/vblank: Fix -Wformat compile warnings on some arches
  drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode
  drm/amd/display: Handle GPU reset for DC block
  drm/amdgpu: add apu flags (v2)
  drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven
  drm/amdgpu: fix pm sysfs node handling (v2)
  drm/amdgpu: move gpu_info parsing after common early init
  drm/amdgpu: move discovery gfx config fetching
  drm/nouveau/dispnv50: fix runtime pm imbalance on error
  drm/nouveau: fix runtime pm imbalance on error
  drm/nouveau: fix runtime pm imbalance on error
  drm/nouveau/debugfs: fix runtime pm imbalance on error
  drm/nouveau/nouveau/hmm: fix migrate zero page to GPU
  drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations
  drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
  drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes()
  ...
2020-06-02 15:04:15 -07:00

529 lines
18 KiB
C

/*
* Copyright © 2006 Keith Packard
* Copyright © 2007-2008 Dave Airlie
* Copyright © 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
* Copyright © 2014 Intel Corporation
* Daniel Vetter <daniel.vetter@ffwll.ch>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef __DRM_MODES_H__
#define __DRM_MODES_H__
#include <linux/hdmi.h>
#include <drm/drm_mode_object.h>
#include <drm/drm_connector.h>
struct videomode;
/*
* Note on terminology: here, for brevity and convenience, we refer to connector
* control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS,
* DVI, etc. And 'screen' refers to the whole of the visible display, which
* may span multiple monitors (and therefore multiple CRTC and connector
* structures).
*/
/**
* enum drm_mode_status - hardware support status of a mode
* @MODE_OK: Mode OK
* @MODE_HSYNC: hsync out of range
* @MODE_VSYNC: vsync out of range
* @MODE_H_ILLEGAL: mode has illegal horizontal timings
* @MODE_V_ILLEGAL: mode has illegal vertical timings
* @MODE_BAD_WIDTH: requires an unsupported linepitch
* @MODE_NOMODE: no mode with a matching name
* @MODE_NO_INTERLACE: interlaced mode not supported
* @MODE_NO_DBLESCAN: doublescan mode not supported
* @MODE_NO_VSCAN: multiscan mode not supported
* @MODE_MEM: insufficient video memory
* @MODE_VIRTUAL_X: mode width too large for specified virtual size
* @MODE_VIRTUAL_Y: mode height too large for specified virtual size
* @MODE_MEM_VIRT: insufficient video memory given virtual size
* @MODE_NOCLOCK: no fixed clock available
* @MODE_CLOCK_HIGH: clock required is too high
* @MODE_CLOCK_LOW: clock required is too low
* @MODE_CLOCK_RANGE: clock/mode isn't in a ClockRange
* @MODE_BAD_HVALUE: horizontal timing was out of range
* @MODE_BAD_VVALUE: vertical timing was out of range
* @MODE_BAD_VSCAN: VScan value out of range
* @MODE_HSYNC_NARROW: horizontal sync too narrow
* @MODE_HSYNC_WIDE: horizontal sync too wide
* @MODE_HBLANK_NARROW: horizontal blanking too narrow
* @MODE_HBLANK_WIDE: horizontal blanking too wide
* @MODE_VSYNC_NARROW: vertical sync too narrow
* @MODE_VSYNC_WIDE: vertical sync too wide
* @MODE_VBLANK_NARROW: vertical blanking too narrow
* @MODE_VBLANK_WIDE: vertical blanking too wide
* @MODE_PANEL: exceeds panel dimensions
* @MODE_INTERLACE_WIDTH: width too large for interlaced mode
* @MODE_ONE_WIDTH: only one width is supported
* @MODE_ONE_HEIGHT: only one height is supported
* @MODE_ONE_SIZE: only one resolution is supported
* @MODE_NO_REDUCED: monitor doesn't accept reduced blanking
* @MODE_NO_STEREO: stereo modes not supported
* @MODE_NO_420: ycbcr 420 modes not supported
* @MODE_STALE: mode has become stale
* @MODE_BAD: unspecified reason
* @MODE_ERROR: error condition
*
* This enum is used to filter out modes not supported by the driver/hardware
* combination.
*/
enum drm_mode_status {
MODE_OK = 0,
MODE_HSYNC,
MODE_VSYNC,
MODE_H_ILLEGAL,
MODE_V_ILLEGAL,
MODE_BAD_WIDTH,
MODE_NOMODE,
MODE_NO_INTERLACE,
MODE_NO_DBLESCAN,
MODE_NO_VSCAN,
MODE_MEM,
MODE_VIRTUAL_X,
MODE_VIRTUAL_Y,
MODE_MEM_VIRT,
MODE_NOCLOCK,
MODE_CLOCK_HIGH,
MODE_CLOCK_LOW,
MODE_CLOCK_RANGE,
MODE_BAD_HVALUE,
MODE_BAD_VVALUE,
MODE_BAD_VSCAN,
MODE_HSYNC_NARROW,
MODE_HSYNC_WIDE,
MODE_HBLANK_NARROW,
MODE_HBLANK_WIDE,
MODE_VSYNC_NARROW,
MODE_VSYNC_WIDE,
MODE_VBLANK_NARROW,
MODE_VBLANK_WIDE,
MODE_PANEL,
MODE_INTERLACE_WIDTH,
MODE_ONE_WIDTH,
MODE_ONE_HEIGHT,
MODE_ONE_SIZE,
MODE_NO_REDUCED,
MODE_NO_STEREO,
MODE_NO_420,
MODE_STALE = -3,
MODE_BAD = -2,
MODE_ERROR = -1
};
#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
.name = nm, .status = 0, .type = (t), .clock = (c), \
.hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
.htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
.vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
.vscan = (vs), .flags = (f)
/**
* DRM_SIMPLE_MODE - Simple display mode
* @hd: Horizontal resolution, width
* @vd: Vertical resolution, height
* @hd_mm: Display width in millimeters
* @vd_mm: Display height in millimeters
*
* This macro initializes a &drm_display_mode that only contains info about
* resolution and physical size.
*/
#define DRM_SIMPLE_MODE(hd, vd, hd_mm, vd_mm) \
.type = DRM_MODE_TYPE_DRIVER, .clock = 1 /* pass validation */, \
.hdisplay = (hd), .hsync_start = (hd), .hsync_end = (hd), \
.htotal = (hd), .vdisplay = (vd), .vsync_start = (vd), \
.vsync_end = (vd), .vtotal = (vd), .width_mm = (hd_mm), \
.height_mm = (vd_mm)
#define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */
#define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */
#define CRTC_NO_DBLSCAN (1 << 2) /* don't adjust doublescan */
#define CRTC_NO_VSCAN (1 << 3) /* don't adjust doublescan */
#define CRTC_STEREO_DOUBLE_ONLY (CRTC_STEREO_DOUBLE | CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
#define DRM_MODE_MATCH_TIMINGS (1 << 0)
#define DRM_MODE_MATCH_CLOCK (1 << 1)
#define DRM_MODE_MATCH_FLAGS (1 << 2)
#define DRM_MODE_MATCH_3D_FLAGS (1 << 3)
#define DRM_MODE_MATCH_ASPECT_RATIO (1 << 4)
/**
* struct drm_display_mode - DRM kernel-internal display mode structure
* @hdisplay: horizontal display size
* @hsync_start: horizontal sync start
* @hsync_end: horizontal sync end
* @htotal: horizontal total size
* @hskew: horizontal skew?!
* @vdisplay: vertical display size
* @vsync_start: vertical sync start
* @vsync_end: vertical sync end
* @vtotal: vertical total size
* @vscan: vertical scan?!
* @crtc_hdisplay: hardware mode horizontal display size
* @crtc_hblank_start: hardware mode horizontal blank start
* @crtc_hblank_end: hardware mode horizontal blank end
* @crtc_hsync_start: hardware mode horizontal sync start
* @crtc_hsync_end: hardware mode horizontal sync end
* @crtc_htotal: hardware mode horizontal total size
* @crtc_hskew: hardware mode horizontal skew?!
* @crtc_vdisplay: hardware mode vertical display size
* @crtc_vblank_start: hardware mode vertical blank start
* @crtc_vblank_end: hardware mode vertical blank end
* @crtc_vsync_start: hardware mode vertical sync start
* @crtc_vsync_end: hardware mode vertical sync end
* @crtc_vtotal: hardware mode vertical total size
*
* The horizontal and vertical timings are defined per the following diagram.
*
* ::
*
*
* Active Front Sync Back
* Region Porch Porch
* <-----------------------><----------------><-------------><-------------->
* //////////////////////|
* ////////////////////// |
* ////////////////////// |.................. ................
* _______________
* <----- [hv]display ----->
* <------------- [hv]sync_start ------------>
* <--------------------- [hv]sync_end --------------------->
* <-------------------------------- [hv]total ----------------------------->*
*
* This structure contains two copies of timings. First are the plain timings,
* which specify the logical mode, as it would be for a progressive 1:1 scanout
* at the refresh rate userspace can observe through vblank timestamps. Then
* there's the hardware timings, which are corrected for interlacing,
* double-clocking and similar things. They are provided as a convenience, and
* can be appropriately computed using drm_mode_set_crtcinfo().
*
* For printing you can use %DRM_MODE_FMT and DRM_MODE_ARG().
*/
struct drm_display_mode {
/**
* @head:
*
* struct list_head for mode lists.
*/
struct list_head head;
/**
* @name:
*
* Human-readable name of the mode, filled out with drm_mode_set_name().
*/
char name[DRM_DISPLAY_MODE_LEN];
/**
* @status:
*
* Status of the mode, used to filter out modes not supported by the
* hardware. See enum &drm_mode_status.
*/
enum drm_mode_status status;
/**
* @type:
*
* A bitmask of flags, mostly about the source of a mode. Possible flags
* are:
*
* - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native
* resolution of an LCD panel. There should only be one preferred
* mode per connector at any given time.
* - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of
* them really. Drivers must set this bit for all modes they create
* and expose to userspace.
* - DRM_MODE_TYPE_USERDEF: Mode defined via kernel command line
*
* Plus a big list of flags which shouldn't be used at all, but are
* still around since these flags are also used in the userspace ABI.
* We no longer accept modes with these types though:
*
* - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, unused.
* Use DRM_MODE_TYPE_DRIVER instead.
* - DRM_MODE_TYPE_DEFAULT: Again a leftover, use
* DRM_MODE_TYPE_PREFERRED instead.
* - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers
* which are stuck around for hysterical raisins only. No one has an
* idea what they were meant for. Don't use.
*/
unsigned int type;
/**
* @clock:
*
* Pixel clock in kHz.
*/
int clock; /* in kHz */
int hdisplay;
int hsync_start;
int hsync_end;
int htotal;
int hskew;
int vdisplay;
int vsync_start;
int vsync_end;
int vtotal;
int vscan;
/**
* @flags:
*
* Sync and timing flags:
*
* - DRM_MODE_FLAG_PHSYNC: horizontal sync is active high.
* - DRM_MODE_FLAG_NHSYNC: horizontal sync is active low.
* - DRM_MODE_FLAG_PVSYNC: vertical sync is active high.
* - DRM_MODE_FLAG_NVSYNC: vertical sync is active low.
* - DRM_MODE_FLAG_INTERLACE: mode is interlaced.
* - DRM_MODE_FLAG_DBLSCAN: mode uses doublescan.
* - DRM_MODE_FLAG_CSYNC: mode uses composite sync.
* - DRM_MODE_FLAG_PCSYNC: composite sync is active high.
* - DRM_MODE_FLAG_NCSYNC: composite sync is active low.
* - DRM_MODE_FLAG_HSKEW: hskew provided (not used?).
* - DRM_MODE_FLAG_BCAST: <deprecated>
* - DRM_MODE_FLAG_PIXMUX: <deprecated>
* - DRM_MODE_FLAG_DBLCLK: double-clocked mode.
* - DRM_MODE_FLAG_CLKDIV2: half-clocked mode.
*
* Additionally there's flags to specify how 3D modes are packed:
*
* - DRM_MODE_FLAG_3D_NONE: normal, non-3D mode.
* - DRM_MODE_FLAG_3D_FRAME_PACKING: 2 full frames for left and right.
* - DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: interleaved like fields.
* - DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: interleaved lines.
* - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: side-by-side full frames.
* - DRM_MODE_FLAG_3D_L_DEPTH: ?
* - DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ?
* - DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: frame split into top and bottom
* parts.
* - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and
* right parts.
*/
unsigned int flags;
/**
* @width_mm:
*
* Addressable size of the output in mm, projectors should set this to
* 0.
*/
int width_mm;
/**
* @height_mm:
*
* Addressable size of the output in mm, projectors should set this to
* 0.
*/
int height_mm;
/**
* @crtc_clock:
*
* Actual pixel or dot clock in the hardware. This differs from the
* logical @clock when e.g. using interlacing, double-clocking, stereo
* modes or other fancy stuff that changes the timings and signals
* actually sent over the wire.
*
* This is again in kHz.
*
* Note that with digital outputs like HDMI or DP there's usually a
* massive confusion between the dot clock and the signal clock at the
* bit encoding level. Especially when a 8b/10b encoding is used and the
* difference is exactly a factor of 10.
*/
int crtc_clock;
int crtc_hdisplay;
int crtc_hblank_start;
int crtc_hblank_end;
int crtc_hsync_start;
int crtc_hsync_end;
int crtc_htotal;
int crtc_hskew;
int crtc_vdisplay;
int crtc_vblank_start;
int crtc_vblank_end;
int crtc_vsync_start;
int crtc_vsync_end;
int crtc_vtotal;
/**
* @private_flags:
*
* Driver private flags. private_flags can only be used for mode
* objects passed to drivers in modeset operations. It shouldn't be used
* by atomic drivers since they can store any additional data by
* subclassing state structures.
*/
int private_flags;
/**
* @vrefresh:
*
* Vertical refresh rate, for debug output in human readable form. Not
* used in a functional way.
*
* This value is in Hz.
*/
int vrefresh;
/**
* @picture_aspect_ratio:
*
* Field for setting the HDMI picture aspect ratio of a mode.
*/
enum hdmi_picture_aspect picture_aspect_ratio;
/**
* @export_head:
*
* struct list_head for modes to be exposed to the userspace.
* This is to maintain a list of exposed modes while preparing
* user-mode's list in drm_mode_getconnector ioctl. The purpose of this
* list_head only lies in the ioctl function, and is not expected to be
* used outside the function.
* Once used, the stale pointers are not reset, but left as it is, to
* avoid overhead of protecting it by mode_config.mutex.
*/
struct list_head export_head;
};
/**
* DRM_MODE_FMT - printf string for &struct drm_display_mode
*/
#define DRM_MODE_FMT "\"%s\": %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x"
/**
* DRM_MODE_ARG - printf arguments for &struct drm_display_mode
* @m: display mode
*/
#define DRM_MODE_ARG(m) \
(m)->name, (m)->vrefresh, (m)->clock, \
(m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \
(m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \
(m)->type, (m)->flags
#define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
/**
* drm_mode_is_stereo - check for stereo mode flags
* @mode: drm_display_mode to check
*
* Returns:
* True if the mode is one of the stereo modes (like side-by-side), false if
* not.
*/
static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode)
{
return mode->flags & DRM_MODE_FLAG_3D_MASK;
}
struct drm_connector;
struct drm_cmdline_mode;
struct drm_display_mode *drm_mode_create(struct drm_device *dev);
void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out,
const struct drm_display_mode *in);
int drm_mode_convert_umode(struct drm_device *dev,
struct drm_display_mode *out,
const struct drm_mode_modeinfo *in);
void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
void drm_mode_debug_printmodeline(const struct drm_display_mode *mode);
bool drm_mode_is_420_only(const struct drm_display_info *display,
const struct drm_display_mode *mode);
bool drm_mode_is_420_also(const struct drm_display_info *display,
const struct drm_display_mode *mode);
bool drm_mode_is_420(const struct drm_display_info *display,
const struct drm_display_mode *mode);
struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
int hdisplay, int vdisplay, int vrefresh,
bool reduced, bool interlaced,
bool margins);
struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
int hdisplay, int vdisplay, int vrefresh,
bool interlaced, int margins);
struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
int hdisplay, int vdisplay,
int vrefresh, bool interlaced,
int margins,
int GTF_M, int GTF_2C,
int GTF_K, int GTF_2J);
void drm_display_mode_from_videomode(const struct videomode *vm,
struct drm_display_mode *dmode);
void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
struct videomode *vm);
void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags);
int of_get_drm_display_mode(struct device_node *np,
struct drm_display_mode *dmode, u32 *bus_flags,
int index);
void drm_mode_set_name(struct drm_display_mode *mode);
int drm_mode_vrefresh(const struct drm_display_mode *mode);
void drm_mode_get_hv_timing(const struct drm_display_mode *mode,
int *hdisplay, int *vdisplay);
void drm_mode_set_crtcinfo(struct drm_display_mode *p,
int adjust_flags);
void drm_mode_copy(struct drm_display_mode *dst,
const struct drm_display_mode *src);
struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
const struct drm_display_mode *mode);
bool drm_mode_match(const struct drm_display_mode *mode1,
const struct drm_display_mode *mode2,
unsigned int match_flags);
bool drm_mode_equal(const struct drm_display_mode *mode1,
const struct drm_display_mode *mode2);
bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1,
const struct drm_display_mode *mode2);
bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
const struct drm_display_mode *mode2);
/* for use by the crtc helper probe functions */
enum drm_mode_status drm_mode_validate_driver(struct drm_device *dev,
const struct drm_display_mode *mode);
enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode,
int maxX, int maxY);
enum drm_mode_status
drm_mode_validate_ycbcr420(const struct drm_display_mode *mode,
struct drm_connector *connector);
void drm_mode_prune_invalid(struct drm_device *dev,
struct list_head *mode_list, bool verbose);
void drm_mode_sort(struct list_head *mode_list);
void drm_connector_list_update(struct drm_connector *connector);
/* parsing cmdline modes */
bool
drm_mode_parse_command_line_for_connector(const char *mode_option,
const struct drm_connector *connector,
struct drm_cmdline_mode *mode);
struct drm_display_mode *
drm_mode_create_from_cmdline_mode(struct drm_device *dev,
struct drm_cmdline_mode *cmd);
#endif /* __DRM_MODES_H__ */