mirror of
https://github.com/torvalds/linux.git
synced 2024-12-13 14:43:03 +00:00
218f23e8a9
7712 is a 16nm process SoC with a 10/100 integrated Ethernet PHY, utilize the recently defined 16nm EPHY macro to configure that PHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
973 lines
26 KiB
C
973 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Broadcom BCM7xxx internal transceivers support.
|
|
*
|
|
* Copyright (C) 2014-2017 Broadcom
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/delay.h>
|
|
#include "bcm-phy-lib.h"
|
|
#include <linux/bitops.h>
|
|
#include <linux/brcmphy.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mdio.h>
|
|
|
|
/* Broadcom BCM7xxx internal PHY registers */
|
|
|
|
/* EPHY only register definitions */
|
|
#define MII_BCM7XXX_100TX_AUX_CTL 0x10
|
|
#define MII_BCM7XXX_100TX_FALSE_CAR 0x13
|
|
#define MII_BCM7XXX_100TX_DISC 0x14
|
|
#define MII_BCM7XXX_AUX_MODE 0x1d
|
|
#define MII_BCM7XXX_64CLK_MDIO BIT(12)
|
|
#define MII_BCM7XXX_TEST 0x1f
|
|
#define MII_BCM7XXX_SHD_MODE_2 BIT(2)
|
|
#define MII_BCM7XXX_SHD_2_ADDR_CTRL 0xe
|
|
#define MII_BCM7XXX_SHD_2_CTRL_STAT 0xf
|
|
#define MII_BCM7XXX_SHD_2_BIAS_TRIM 0x1a
|
|
#define MII_BCM7XXX_SHD_3_PCS_CTRL 0x0
|
|
#define MII_BCM7XXX_SHD_3_PCS_STATUS 0x1
|
|
#define MII_BCM7XXX_SHD_3_EEE_CAP 0x2
|
|
#define MII_BCM7XXX_SHD_3_AN_EEE_ADV 0x3
|
|
#define MII_BCM7XXX_SHD_3_EEE_LP 0x4
|
|
#define MII_BCM7XXX_SHD_3_EEE_WK_ERR 0x5
|
|
#define MII_BCM7XXX_SHD_3_PCS_CTRL_2 0x6
|
|
#define MII_BCM7XXX_PCS_CTRL_2_DEF 0x4400
|
|
#define MII_BCM7XXX_SHD_3_AN_STAT 0xb
|
|
#define MII_BCM7XXX_AN_NULL_MSG_EN BIT(0)
|
|
#define MII_BCM7XXX_AN_EEE_EN BIT(1)
|
|
#define MII_BCM7XXX_SHD_3_EEE_THRESH 0xe
|
|
#define MII_BCM7XXX_EEE_THRESH_DEF 0x50
|
|
#define MII_BCM7XXX_SHD_3_TL4 0x23
|
|
#define MII_BCM7XXX_TL4_RST_MSK (BIT(2) | BIT(1))
|
|
|
|
struct bcm7xxx_phy_priv {
|
|
u64 *stats;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
|
|
{
|
|
/* AFE_RXCONFIG_0 */
|
|
bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
|
|
|
|
/* AFE_RXCONFIG_1 */
|
|
bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
|
|
|
|
/* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */
|
|
bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
|
|
|
|
/* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */
|
|
bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
|
|
|
|
/* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */
|
|
bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
|
|
|
|
/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
|
|
bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
|
|
|
|
/* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */
|
|
bcm_phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
|
|
|
|
/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
|
|
* offset for HT=0 code
|
|
*/
|
|
bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
|
|
|
|
/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
|
|
phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010);
|
|
|
|
/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
|
|
bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
|
|
|
|
/* Reset R_CAL/RC_CAL engine */
|
|
bcm_phy_r_rc_cal_reset(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
|
|
{
|
|
/* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */
|
|
bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
|
|
|
|
/* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */
|
|
bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
|
|
|
|
/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
|
|
bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
|
|
|
|
/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
|
|
* offset for HT=0 code
|
|
*/
|
|
bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
|
|
|
|
/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
|
|
phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010);
|
|
|
|
/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
|
|
bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
|
|
|
|
/* Reset R_CAL/RC_CAL engine */
|
|
bcm_phy_r_rc_cal_reset(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
|
|
{
|
|
/* +1 RC_CAL codes for RL centering for both LT and HT conditions */
|
|
bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003);
|
|
|
|
/* Cut master bias current by 2% to compensate for RC_CAL offset */
|
|
bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b);
|
|
|
|
/* Improve hybrid leakage */
|
|
bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3);
|
|
|
|
/* Change rx_on_tune 8 to 0xf */
|
|
bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6);
|
|
|
|
/* Change 100Tx EEE bandwidth */
|
|
bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d);
|
|
|
|
/* Enable ffe zero detection for Vitesse interoperability */
|
|
bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
|
|
|
|
bcm_phy_r_rc_cal_reset(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
|
|
{
|
|
u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
|
|
u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
|
|
u8 count;
|
|
int ret = 0;
|
|
|
|
/* Newer devices have moved the revision information back into a
|
|
* standard location in MII_PHYS_ID[23]
|
|
*/
|
|
if (rev == 0)
|
|
rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
|
|
|
|
pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
|
|
phydev_name(phydev), phydev->drv->name, rev, patch);
|
|
|
|
/* Dummy read to a register to workaround an issue upon reset where the
|
|
* internal inverter may not allow the first MDIO transaction to pass
|
|
* the MDIO management controller and make us return 0xffff for such
|
|
* reads.
|
|
*/
|
|
phy_read(phydev, MII_BMSR);
|
|
|
|
switch (rev) {
|
|
case 0xa0:
|
|
case 0xb0:
|
|
ret = bcm_phy_28nm_a0b0_afe_config_init(phydev);
|
|
break;
|
|
case 0xd0:
|
|
ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
|
|
break;
|
|
case 0xe0:
|
|
case 0xf0:
|
|
/* Rev G0 introduces a roll over */
|
|
case 0x10:
|
|
ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
|
|
break;
|
|
case 0x01:
|
|
ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm_phy_enable_jumbo(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm_phy_downshift_get(phydev, &count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Only enable EEE if Wirespeed/downshift is disabled */
|
|
ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return bcm_phy_enable_apd(phydev, true);
|
|
}
|
|
|
|
static int bcm7xxx_28nm_resume(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Re-apply workarounds coming out suspend/resume */
|
|
ret = bcm7xxx_28nm_config_init(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 28nm Gigabit PHYs come out of reset without any half-duplex
|
|
* or "hub" compliant advertised mode, fix that. This does not
|
|
* cause any problems with the PHY library since genphy_config_aneg()
|
|
* gracefully handles auto-negotiated and forced modes.
|
|
*/
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int __phy_set_clr_bits(struct phy_device *dev, int location,
|
|
int set_mask, int clr_mask)
|
|
{
|
|
int v, ret;
|
|
|
|
v = __phy_read(dev, location);
|
|
if (v < 0)
|
|
return v;
|
|
|
|
v &= ~clr_mask;
|
|
v |= set_mask;
|
|
|
|
ret = __phy_write(dev, location, v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return v;
|
|
}
|
|
|
|
static int phy_set_clr_bits(struct phy_device *dev, int location,
|
|
int set_mask, int clr_mask)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&dev->mdio.bus->mdio_lock);
|
|
ret = __phy_set_clr_bits(dev, location, set_mask, clr_mask);
|
|
mutex_unlock(&dev->mdio.bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_ephy_01_afe_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* set shadow mode 2 */
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
|
|
MII_BCM7XXX_SHD_MODE_2, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set current trim values INT_trim = -1, Ext_trim =0 */
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_BIAS_TRIM, 0x3BE0);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
|
|
/* Cal reset */
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
|
|
MII_BCM7XXX_SHD_3_TL4);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
|
|
MII_BCM7XXX_TL4_RST_MSK, 0);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
|
|
/* Cal reset disable */
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
|
|
MII_BCM7XXX_SHD_3_TL4);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
|
|
0, MII_BCM7XXX_TL4_RST_MSK);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
|
|
reset_shadow_mode:
|
|
/* reset shadow mode 2 */
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
|
|
MII_BCM7XXX_SHD_MODE_2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* The 28nm EPHY does not support Clause 45 (MMD) used by bcm-phy-lib */
|
|
static int bcm7xxx_28nm_ephy_apd_enable(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* set shadow mode 1 */
|
|
ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST,
|
|
MII_BRCM_FET_BT_SRE, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Enable auto-power down */
|
|
ret = phy_set_clr_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
|
|
MII_BRCM_FET_SHDW_AS2_APDE, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* reset shadow mode 1 */
|
|
ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST, 0,
|
|
MII_BRCM_FET_BT_SRE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_ephy_eee_enable(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* set shadow mode 2 */
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
|
|
MII_BCM7XXX_SHD_MODE_2, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Advertise supported modes */
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
|
|
MII_BCM7XXX_SHD_3_AN_EEE_ADV);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
|
|
MDIO_EEE_100TX);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
|
|
/* Restore Defaults */
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
|
|
MII_BCM7XXX_SHD_3_PCS_CTRL_2);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
|
|
MII_BCM7XXX_PCS_CTRL_2_DEF);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
|
|
MII_BCM7XXX_SHD_3_EEE_THRESH);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
|
|
MII_BCM7XXX_EEE_THRESH_DEF);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
|
|
/* Enable EEE autonegotiation */
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
|
|
MII_BCM7XXX_SHD_3_AN_STAT);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
|
|
(MII_BCM7XXX_AN_NULL_MSG_EN | MII_BCM7XXX_AN_EEE_EN));
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
|
|
reset_shadow_mode:
|
|
/* reset shadow mode 2 */
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
|
|
MII_BCM7XXX_SHD_MODE_2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Restart autoneg */
|
|
phy_write(phydev, MII_BMCR,
|
|
(BMCR_SPEED100 | BMCR_ANENABLE | BMCR_ANRESTART));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_ephy_config_init(struct phy_device *phydev)
|
|
{
|
|
u8 rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
|
|
int ret = 0;
|
|
|
|
pr_info_once("%s: %s PHY revision: 0x%02x\n",
|
|
phydev_name(phydev), phydev->drv->name, rev);
|
|
|
|
/* Dummy read to a register to workaround a possible issue upon reset
|
|
* where the internal inverter may not allow the first MDIO transaction
|
|
* to pass the MDIO management controller and make us return 0xffff for
|
|
* such reads.
|
|
*/
|
|
phy_read(phydev, MII_BMSR);
|
|
|
|
/* Apply AFE software work-around if necessary */
|
|
if (rev == 0x01) {
|
|
ret = bcm7xxx_28nm_ephy_01_afe_config_init(phydev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = bcm7xxx_28nm_ephy_eee_enable(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return bcm7xxx_28nm_ephy_apd_enable(phydev);
|
|
}
|
|
|
|
static int bcm7xxx_16nm_ephy_afe_config(struct phy_device *phydev)
|
|
{
|
|
int tmp, rcalcode, rcalnewcodelp, rcalnewcode11, rcalnewcode11d2;
|
|
|
|
/* Reset PHY */
|
|
tmp = genphy_soft_reset(phydev);
|
|
if (tmp)
|
|
return tmp;
|
|
|
|
/* Reset AFE and PLL */
|
|
bcm_phy_write_exp_sel(phydev, 0x0003, 0x0006);
|
|
/* Clear reset */
|
|
bcm_phy_write_exp_sel(phydev, 0x0003, 0x0000);
|
|
|
|
/* Write PLL/AFE control register to select 54MHz crystal */
|
|
bcm_phy_write_misc(phydev, 0x0030, 0x0001, 0x0000);
|
|
bcm_phy_write_misc(phydev, 0x0031, 0x0000, 0x044a);
|
|
|
|
/* Change Ka,Kp,Ki to pdiv=1 */
|
|
bcm_phy_write_misc(phydev, 0x0033, 0x0002, 0x71a1);
|
|
/* Configuration override */
|
|
bcm_phy_write_misc(phydev, 0x0033, 0x0001, 0x8000);
|
|
|
|
/* Change PLL_NDIV and PLL_NUDGE */
|
|
bcm_phy_write_misc(phydev, 0x0031, 0x0001, 0x2f68);
|
|
bcm_phy_write_misc(phydev, 0x0031, 0x0002, 0x0000);
|
|
|
|
/* Reference frequency is 54Mhz, config_mode[15:14] = 3 (low
|
|
* phase)
|
|
*/
|
|
bcm_phy_write_misc(phydev, 0x0030, 0x0003, 0xc036);
|
|
|
|
/* Initialize bypass mode */
|
|
bcm_phy_write_misc(phydev, 0x0032, 0x0003, 0x0000);
|
|
/* Bypass code, default: VCOCLK enabled */
|
|
bcm_phy_write_misc(phydev, 0x0033, 0x0000, 0x0002);
|
|
/* LDOs at default setting */
|
|
bcm_phy_write_misc(phydev, 0x0030, 0x0002, 0x01c0);
|
|
/* Release PLL reset */
|
|
bcm_phy_write_misc(phydev, 0x0030, 0x0001, 0x0001);
|
|
|
|
/* Bandgap curvature correction to correct default */
|
|
bcm_phy_write_misc(phydev, 0x0038, 0x0000, 0x0010);
|
|
|
|
/* Run RCAL */
|
|
bcm_phy_write_misc(phydev, 0x0039, 0x0003, 0x0038);
|
|
bcm_phy_write_misc(phydev, 0x0039, 0x0003, 0x003b);
|
|
udelay(2);
|
|
bcm_phy_write_misc(phydev, 0x0039, 0x0003, 0x003f);
|
|
mdelay(5);
|
|
|
|
/* AFE_CAL_CONFIG_0, Vref=1000, Target=10, averaging enabled */
|
|
bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x1c82);
|
|
/* AFE_CAL_CONFIG_0, no reset and analog powerup */
|
|
bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9e82);
|
|
udelay(2);
|
|
/* AFE_CAL_CONFIG_0, start calibration */
|
|
bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9f82);
|
|
udelay(100);
|
|
/* AFE_CAL_CONFIG_0, clear start calibration, set HiBW */
|
|
bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9e86);
|
|
udelay(2);
|
|
/* AFE_CAL_CONFIG_0, start calibration with hi BW mode set */
|
|
bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9f86);
|
|
udelay(100);
|
|
|
|
/* Adjust 10BT amplitude additional +7% and 100BT +2% */
|
|
bcm_phy_write_misc(phydev, 0x0038, 0x0001, 0xe7ea);
|
|
/* Adjust 1G mode amplitude and 1G testmode1 */
|
|
bcm_phy_write_misc(phydev, 0x0038, 0x0002, 0xede0);
|
|
|
|
/* Read CORE_EXPA9 */
|
|
tmp = bcm_phy_read_exp(phydev, 0x00a9);
|
|
/* CORE_EXPA9[6:1] is rcalcode[5:0] */
|
|
rcalcode = (tmp & 0x7e) / 2;
|
|
/* Correct RCAL code + 1 is -1% rprogr, LP: +16 */
|
|
rcalnewcodelp = rcalcode + 16;
|
|
/* Correct RCAL code + 1 is -15 rprogr, 11: +10 */
|
|
rcalnewcode11 = rcalcode + 10;
|
|
/* Saturate if necessary */
|
|
if (rcalnewcodelp > 0x3f)
|
|
rcalnewcodelp = 0x3f;
|
|
if (rcalnewcode11 > 0x3f)
|
|
rcalnewcode11 = 0x3f;
|
|
/* REXT=1 BYP=1 RCAL_st1<5:0>=new rcal code */
|
|
tmp = 0x00f8 + rcalnewcodelp * 256;
|
|
/* Program into AFE_CAL_CONFIG_2 */
|
|
bcm_phy_write_misc(phydev, 0x0039, 0x0003, tmp);
|
|
/* AFE_BIAS_CONFIG_0 10BT bias code (Bias: E4) */
|
|
bcm_phy_write_misc(phydev, 0x0038, 0x0001, 0xe7e4);
|
|
/* invert adc clock output and 'adc refp ldo current To correct
|
|
* default
|
|
*/
|
|
bcm_phy_write_misc(phydev, 0x003b, 0x0000, 0x8002);
|
|
/* 100BT stair case, high BW, 1G stair case, alternate encode */
|
|
bcm_phy_write_misc(phydev, 0x003c, 0x0003, 0xf882);
|
|
/* 1000BT DAC transition method per Erol, bits[32], DAC Shuffle
|
|
* sequence 1 + 10BT imp adjust bits
|
|
*/
|
|
bcm_phy_write_misc(phydev, 0x003d, 0x0000, 0x3201);
|
|
/* Non-overlap fix */
|
|
bcm_phy_write_misc(phydev, 0x003a, 0x0002, 0x0c00);
|
|
|
|
/* pwdb override (rxconfig<5>) to turn on RX LDO indpendent of
|
|
* pwdb controls from DSP_TAP10
|
|
*/
|
|
bcm_phy_write_misc(phydev, 0x003a, 0x0001, 0x0020);
|
|
|
|
/* Remove references to channel 2 and 3 */
|
|
bcm_phy_write_misc(phydev, 0x003b, 0x0002, 0x0000);
|
|
bcm_phy_write_misc(phydev, 0x003b, 0x0003, 0x0000);
|
|
|
|
/* Set cal_bypassb bit rxconfig<43> */
|
|
bcm_phy_write_misc(phydev, 0x003a, 0x0003, 0x0800);
|
|
udelay(2);
|
|
|
|
/* Revert pwdb_override (rxconfig<5>) to 0 so that the RX pwr
|
|
* is controlled by DSP.
|
|
*/
|
|
bcm_phy_write_misc(phydev, 0x003a, 0x0001, 0x0000);
|
|
|
|
/* Drop LSB */
|
|
rcalnewcode11d2 = (rcalnewcode11 & 0xfffe) / 2;
|
|
tmp = bcm_phy_read_misc(phydev, 0x003d, 0x0001);
|
|
/* Clear bits [11:5] */
|
|
tmp &= ~0xfe0;
|
|
/* set txcfg_ch0<5>=1 (enable + set local rcal) */
|
|
tmp |= 0x0020 | (rcalnewcode11d2 * 64);
|
|
bcm_phy_write_misc(phydev, 0x003d, 0x0001, tmp);
|
|
bcm_phy_write_misc(phydev, 0x003d, 0x0002, tmp);
|
|
|
|
tmp = bcm_phy_read_misc(phydev, 0x003d, 0x0000);
|
|
/* set txcfg<45:44>=11 (enable Rextra + invert fullscaledetect)
|
|
*/
|
|
tmp &= ~0x3000;
|
|
tmp |= 0x3000;
|
|
bcm_phy_write_misc(phydev, 0x003d, 0x0000, tmp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_16nm_ephy_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret, val;
|
|
|
|
ret = bcm7xxx_16nm_ephy_afe_config(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm_phy_set_eee(phydev, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = ret;
|
|
|
|
/* Auto power down of DLL enabled,
|
|
* TXC/RXC disabled during auto power down.
|
|
*/
|
|
val &= ~BCM54XX_SHD_SCR3_DLLAPD_DIS;
|
|
val |= BIT(8);
|
|
|
|
ret = bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return bcm_phy_enable_apd(phydev, true);
|
|
}
|
|
|
|
static int bcm7xxx_16nm_ephy_resume(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Re-apply workarounds coming out suspend/resume */
|
|
ret = bcm7xxx_16nm_ephy_config_init(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
#define MII_BCM7XXX_REG_INVALID 0xff
|
|
|
|
static u8 bcm7xxx_28nm_ephy_regnum_to_shd(u16 regnum)
|
|
{
|
|
switch (regnum) {
|
|
case MDIO_CTRL1:
|
|
return MII_BCM7XXX_SHD_3_PCS_CTRL;
|
|
case MDIO_STAT1:
|
|
return MII_BCM7XXX_SHD_3_PCS_STATUS;
|
|
case MDIO_PCS_EEE_ABLE:
|
|
return MII_BCM7XXX_SHD_3_EEE_CAP;
|
|
case MDIO_AN_EEE_ADV:
|
|
return MII_BCM7XXX_SHD_3_AN_EEE_ADV;
|
|
case MDIO_AN_EEE_LPABLE:
|
|
return MII_BCM7XXX_SHD_3_EEE_LP;
|
|
case MDIO_PCS_EEE_WK_ERR:
|
|
return MII_BCM7XXX_SHD_3_EEE_WK_ERR;
|
|
default:
|
|
return MII_BCM7XXX_REG_INVALID;
|
|
}
|
|
}
|
|
|
|
static bool bcm7xxx_28nm_ephy_dev_valid(int devnum)
|
|
{
|
|
return devnum == MDIO_MMD_AN || devnum == MDIO_MMD_PCS;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_ephy_read_mmd(struct phy_device *phydev,
|
|
int devnum, u16 regnum)
|
|
{
|
|
u8 shd = bcm7xxx_28nm_ephy_regnum_to_shd(regnum);
|
|
int ret;
|
|
|
|
if (!bcm7xxx_28nm_ephy_dev_valid(devnum) ||
|
|
shd == MII_BCM7XXX_REG_INVALID)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* set shadow mode 2 */
|
|
ret = __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
|
|
MII_BCM7XXX_SHD_MODE_2, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Access the desired shadow register address */
|
|
ret = __phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, shd);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
|
|
ret = __phy_read(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT);
|
|
|
|
reset_shadow_mode:
|
|
/* reset shadow mode 2 */
|
|
__phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
|
|
MII_BCM7XXX_SHD_MODE_2);
|
|
return ret;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_ephy_write_mmd(struct phy_device *phydev,
|
|
int devnum, u16 regnum, u16 val)
|
|
{
|
|
u8 shd = bcm7xxx_28nm_ephy_regnum_to_shd(regnum);
|
|
int ret;
|
|
|
|
if (!bcm7xxx_28nm_ephy_dev_valid(devnum) ||
|
|
shd == MII_BCM7XXX_REG_INVALID)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* set shadow mode 2 */
|
|
ret = __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
|
|
MII_BCM7XXX_SHD_MODE_2, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Access the desired shadow register address */
|
|
ret = __phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, shd);
|
|
if (ret < 0)
|
|
goto reset_shadow_mode;
|
|
|
|
/* Write the desired value in the shadow register */
|
|
__phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, val);
|
|
|
|
reset_shadow_mode:
|
|
/* reset shadow mode 2 */
|
|
return __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
|
|
MII_BCM7XXX_SHD_MODE_2);
|
|
}
|
|
|
|
static int bcm7xxx_28nm_ephy_resume(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Re-apply workarounds coming out suspend/resume */
|
|
ret = bcm7xxx_28nm_ephy_config_init(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int bcm7xxx_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable 64 clock MDIO */
|
|
phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XXX_64CLK_MDIO);
|
|
phy_read(phydev, MII_BCM7XXX_AUX_MODE);
|
|
|
|
/* set shadow mode 2 */
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
|
|
MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set iddq_clkbias */
|
|
phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0F00);
|
|
udelay(10);
|
|
|
|
/* reset iddq_clkbias */
|
|
phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0C00);
|
|
|
|
phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
|
|
|
|
/* reset shadow mode 2 */
|
|
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Workaround for putting the PHY in IDDQ mode, required
|
|
* for all BCM7XXX 40nm and 65nm PHYs
|
|
*/
|
|
static int bcm7xxx_suspend(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
static const struct bcm7xxx_regs {
|
|
int reg;
|
|
u16 value;
|
|
} bcm7xxx_suspend_cfg[] = {
|
|
{ MII_BCM7XXX_TEST, 0x008b },
|
|
{ MII_BCM7XXX_100TX_AUX_CTL, 0x01c0 },
|
|
{ MII_BCM7XXX_100TX_DISC, 0x7000 },
|
|
{ MII_BCM7XXX_TEST, 0x000f },
|
|
{ MII_BCM7XXX_100TX_AUX_CTL, 0x20d0 },
|
|
{ MII_BCM7XXX_TEST, 0x000b },
|
|
};
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) {
|
|
ret = phy_write(phydev,
|
|
bcm7xxx_suspend_cfg[i].reg,
|
|
bcm7xxx_suspend_cfg[i].value);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm7xxx_28nm_get_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna,
|
|
void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return bcm_phy_downshift_get(phydev, (u8 *)data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int bcm7xxx_28nm_set_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna,
|
|
const void *data)
|
|
{
|
|
u8 count = *(u8 *)data;
|
|
int ret;
|
|
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
ret = bcm_phy_downshift_set(phydev, count);
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Disable EEE advertisement since this prevents the PHY
|
|
* from successfully linking up, trigger auto-negotiation restart
|
|
* to let the MAC decide what to do.
|
|
*/
|
|
ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return genphy_restart_aneg(phydev);
|
|
}
|
|
|
|
static void bcm7xxx_28nm_get_phy_stats(struct phy_device *phydev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
struct bcm7xxx_phy_priv *priv = phydev->priv;
|
|
|
|
bcm_phy_get_stats(phydev, priv->stats, stats, data);
|
|
}
|
|
|
|
static int bcm7xxx_28nm_probe(struct phy_device *phydev)
|
|
{
|
|
struct bcm7xxx_phy_priv *priv;
|
|
int ret = 0;
|
|
|
|
priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
phydev->priv = priv;
|
|
|
|
priv->stats = devm_kcalloc(&phydev->mdio.dev,
|
|
bcm_phy_get_sset_count(phydev), sizeof(u64),
|
|
GFP_KERNEL);
|
|
if (!priv->stats)
|
|
return -ENOMEM;
|
|
|
|
priv->clk = devm_clk_get_optional(&phydev->mdio.dev, NULL);
|
|
if (IS_ERR(priv->clk))
|
|
return PTR_ERR(priv->clk);
|
|
|
|
ret = clk_prepare_enable(priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Dummy read to a register to workaround an issue upon reset where the
|
|
* internal inverter may not allow the first MDIO transaction to pass
|
|
* the MDIO management controller and make us return 0xffff for such
|
|
* reads. This is needed to ensure that any subsequent reads to the
|
|
* PHY will succeed.
|
|
*/
|
|
phy_read(phydev, MII_BMSR);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void bcm7xxx_28nm_remove(struct phy_device *phydev)
|
|
{
|
|
struct bcm7xxx_phy_priv *priv = phydev->priv;
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
}
|
|
|
|
#define BCM7XXX_28NM_GPHY(_oui, _name) \
|
|
{ \
|
|
.phy_id = (_oui), \
|
|
.phy_id_mask = 0xfffffff0, \
|
|
.name = _name, \
|
|
/* PHY_GBIT_FEATURES */ \
|
|
.flags = PHY_IS_INTERNAL, \
|
|
.config_init = bcm7xxx_28nm_config_init, \
|
|
.resume = bcm7xxx_28nm_resume, \
|
|
.get_tunable = bcm7xxx_28nm_get_tunable, \
|
|
.set_tunable = bcm7xxx_28nm_set_tunable, \
|
|
.get_sset_count = bcm_phy_get_sset_count, \
|
|
.get_strings = bcm_phy_get_strings, \
|
|
.get_stats = bcm7xxx_28nm_get_phy_stats, \
|
|
.probe = bcm7xxx_28nm_probe, \
|
|
.remove = bcm7xxx_28nm_remove, \
|
|
}
|
|
|
|
#define BCM7XXX_28NM_EPHY(_oui, _name) \
|
|
{ \
|
|
.phy_id = (_oui), \
|
|
.phy_id_mask = 0xfffffff0, \
|
|
.name = _name, \
|
|
/* PHY_BASIC_FEATURES */ \
|
|
.flags = PHY_IS_INTERNAL, \
|
|
.config_init = bcm7xxx_28nm_ephy_config_init, \
|
|
.resume = bcm7xxx_28nm_ephy_resume, \
|
|
.get_sset_count = bcm_phy_get_sset_count, \
|
|
.get_strings = bcm_phy_get_strings, \
|
|
.get_stats = bcm7xxx_28nm_get_phy_stats, \
|
|
.probe = bcm7xxx_28nm_probe, \
|
|
.remove = bcm7xxx_28nm_remove, \
|
|
.read_mmd = bcm7xxx_28nm_ephy_read_mmd, \
|
|
.write_mmd = bcm7xxx_28nm_ephy_write_mmd, \
|
|
}
|
|
|
|
#define BCM7XXX_40NM_EPHY(_oui, _name) \
|
|
{ \
|
|
.phy_id = (_oui), \
|
|
.phy_id_mask = 0xfffffff0, \
|
|
.name = _name, \
|
|
/* PHY_BASIC_FEATURES */ \
|
|
.flags = PHY_IS_INTERNAL, \
|
|
.soft_reset = genphy_soft_reset, \
|
|
.config_init = bcm7xxx_config_init, \
|
|
.suspend = bcm7xxx_suspend, \
|
|
.resume = bcm7xxx_config_init, \
|
|
}
|
|
|
|
#define BCM7XXX_16NM_EPHY(_oui, _name) \
|
|
{ \
|
|
.phy_id = (_oui), \
|
|
.phy_id_mask = 0xfffffff0, \
|
|
.name = _name, \
|
|
/* PHY_BASIC_FEATURES */ \
|
|
.flags = PHY_IS_INTERNAL, \
|
|
.probe = bcm7xxx_28nm_probe, \
|
|
.remove = bcm7xxx_28nm_remove, \
|
|
.config_init = bcm7xxx_16nm_ephy_config_init, \
|
|
.config_aneg = genphy_config_aneg, \
|
|
.read_status = genphy_read_status, \
|
|
.resume = bcm7xxx_16nm_ephy_resume, \
|
|
}
|
|
|
|
static struct phy_driver bcm7xxx_driver[] = {
|
|
BCM7XXX_28NM_EPHY(PHY_ID_BCM72113, "Broadcom BCM72113"),
|
|
BCM7XXX_28NM_EPHY(PHY_ID_BCM72116, "Broadcom BCM72116"),
|
|
BCM7XXX_16NM_EPHY(PHY_ID_BCM72165, "Broadcom BCM72165"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
|
|
BCM7XXX_28NM_EPHY(PHY_ID_BCM7255, "Broadcom BCM7255"),
|
|
BCM7XXX_28NM_EPHY(PHY_ID_BCM7260, "Broadcom BCM7260"),
|
|
BCM7XXX_28NM_EPHY(PHY_ID_BCM7268, "Broadcom BCM7268"),
|
|
BCM7XXX_28NM_EPHY(PHY_ID_BCM7271, "Broadcom BCM7271"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM74371, "Broadcom BCM74371"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"),
|
|
BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
|
|
BCM7XXX_40NM_EPHY(PHY_ID_BCM7346, "Broadcom BCM7346"),
|
|
BCM7XXX_40NM_EPHY(PHY_ID_BCM7362, "Broadcom BCM7362"),
|
|
BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),
|
|
BCM7XXX_40NM_EPHY(PHY_ID_BCM7429, "Broadcom BCM7429"),
|
|
BCM7XXX_40NM_EPHY(PHY_ID_BCM7435, "Broadcom BCM7435"),
|
|
BCM7XXX_16NM_EPHY(PHY_ID_BCM7712, "Broadcom BCM7712"),
|
|
};
|
|
|
|
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
|
|
{ PHY_ID_BCM72113, 0xfffffff0 },
|
|
{ PHY_ID_BCM72116, 0xfffffff0, },
|
|
{ PHY_ID_BCM72165, 0xfffffff0, },
|
|
{ PHY_ID_BCM7250, 0xfffffff0, },
|
|
{ PHY_ID_BCM7255, 0xfffffff0, },
|
|
{ PHY_ID_BCM7260, 0xfffffff0, },
|
|
{ PHY_ID_BCM7268, 0xfffffff0, },
|
|
{ PHY_ID_BCM7271, 0xfffffff0, },
|
|
{ PHY_ID_BCM7278, 0xfffffff0, },
|
|
{ PHY_ID_BCM7364, 0xfffffff0, },
|
|
{ PHY_ID_BCM7366, 0xfffffff0, },
|
|
{ PHY_ID_BCM7346, 0xfffffff0, },
|
|
{ PHY_ID_BCM7362, 0xfffffff0, },
|
|
{ PHY_ID_BCM7425, 0xfffffff0, },
|
|
{ PHY_ID_BCM7429, 0xfffffff0, },
|
|
{ PHY_ID_BCM74371, 0xfffffff0, },
|
|
{ PHY_ID_BCM7439, 0xfffffff0, },
|
|
{ PHY_ID_BCM7435, 0xfffffff0, },
|
|
{ PHY_ID_BCM7445, 0xfffffff0, },
|
|
{ PHY_ID_BCM7712, 0xfffffff0, },
|
|
{ }
|
|
};
|
|
|
|
module_phy_driver(bcm7xxx_driver);
|
|
|
|
MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);
|
|
|
|
MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Broadcom Corporation");
|