mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 04:31:50 +00:00
ee01c0b438
Message Handling Unit version is v2.1. When arm_mhuv2 working with the data protocol transfer mode. We have split one mhu into two channels, and every channel include four channel windows, the two channels share one gic spi interrupt. There is a problem with the sending scenario. The first channel will take up 0-3 channel windows, and the second channel take up 4-7 channel windows. When the first channel send the data, and the receiver will clear all the four channels status. Although we only enabled the interrupt on the last channel window with register CH_INT_EN,the register CHCOMB_INT_ST0 will be 0xf, not be 0x8. Currently we just clear the last channel windows int status with the data proctol mode.So after that,the CHCOMB_INT_ST0 status will be 0x7, not be the 0x0. Then the second channel send the data, the receiver read the data, clear all the four channel windows status, trigger the sender interrupt. But currently the CHCOMB_INT_ST0 register will be 0xf7, get_irq_chan_comb function will always return the first channel. So this patch clear all channel windows int status to avoid this interrupt confusion. Signed-off-by: Xiaowu.ding <xiaowu.ding@jaguarmicro.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
1139 lines
30 KiB
C
1139 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ARM Message Handling Unit Version 2 (MHUv2) driver.
|
|
*
|
|
* Copyright (C) 2020 ARM Ltd.
|
|
* Copyright (C) 2020 Linaro Ltd.
|
|
*
|
|
* An MHUv2 mailbox controller can provide up to 124 channel windows (each 32
|
|
* bit long) and the driver allows any combination of both the transport
|
|
* protocol modes: data-transfer and doorbell, to be used on those channel
|
|
* windows.
|
|
*
|
|
* The transport protocols should be specified in the device tree entry for the
|
|
* device. The transport protocols determine how the underlying hardware
|
|
* resources of the device are utilized when transmitting data. Refer to the
|
|
* device tree bindings of the ARM MHUv2 controller for more details.
|
|
*
|
|
* The number of registered mailbox channels is dependent on both the underlying
|
|
* hardware - mainly the number of channel windows implemented by the platform,
|
|
* as well as the selected transport protocols.
|
|
*
|
|
* The MHUv2 controller can work both as a sender and receiver, but the driver
|
|
* and the DT bindings support unidirectional transfers for better allocation of
|
|
* the channels. That is, this driver will be probed for two separate devices
|
|
* for each mailbox controller, a sender device and a receiver device.
|
|
*/
|
|
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mailbox_controller.h>
|
|
#include <linux/mailbox/arm_mhuv2_message.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
/* ====== MHUv2 Registers ====== */
|
|
|
|
/* Maximum number of channel windows */
|
|
#define MHUV2_CH_WN_MAX 124
|
|
/* Number of combined interrupt status registers */
|
|
#define MHUV2_CMB_INT_ST_REG_CNT 4
|
|
#define MHUV2_STAT_BYTES (sizeof(u32))
|
|
#define MHUV2_STAT_BITS (MHUV2_STAT_BYTES * __CHAR_BIT__)
|
|
|
|
#define LSB_MASK(n) ((1 << (n * __CHAR_BIT__)) - 1)
|
|
#define MHUV2_PROTOCOL_PROP "arm,mhuv2-protocols"
|
|
|
|
/* Register Message Handling Unit Configuration fields */
|
|
struct mhu_cfg_t {
|
|
u32 num_ch : 7;
|
|
u32 pad : 25;
|
|
} __packed;
|
|
|
|
/* register Interrupt Status fields */
|
|
struct int_st_t {
|
|
u32 nr2r : 1;
|
|
u32 r2nr : 1;
|
|
u32 pad : 30;
|
|
} __packed;
|
|
|
|
/* Register Interrupt Clear fields */
|
|
struct int_clr_t {
|
|
u32 nr2r : 1;
|
|
u32 r2nr : 1;
|
|
u32 pad : 30;
|
|
} __packed;
|
|
|
|
/* Register Interrupt Enable fields */
|
|
struct int_en_t {
|
|
u32 r2nr : 1;
|
|
u32 nr2r : 1;
|
|
u32 chcomb : 1;
|
|
u32 pad : 29;
|
|
} __packed;
|
|
|
|
/* Register Implementer Identification fields */
|
|
struct iidr_t {
|
|
u32 implementer : 12;
|
|
u32 revision : 4;
|
|
u32 variant : 4;
|
|
u32 product_id : 12;
|
|
} __packed;
|
|
|
|
/* Register Architecture Identification Register fields */
|
|
struct aidr_t {
|
|
u32 arch_minor_rev : 4;
|
|
u32 arch_major_rev : 4;
|
|
u32 pad : 24;
|
|
} __packed;
|
|
|
|
/* Sender Channel Window fields */
|
|
struct mhu2_send_ch_wn_reg {
|
|
u32 stat;
|
|
u8 pad1[0x0C - 0x04];
|
|
u32 stat_set;
|
|
u32 int_st;
|
|
u32 int_clr;
|
|
u32 int_en;
|
|
u8 pad2[0x20 - 0x1C];
|
|
} __packed;
|
|
|
|
/* Sender frame register fields */
|
|
struct mhu2_send_frame_reg {
|
|
struct mhu2_send_ch_wn_reg ch_wn[MHUV2_CH_WN_MAX];
|
|
struct mhu_cfg_t mhu_cfg;
|
|
u32 resp_cfg;
|
|
u32 access_request;
|
|
u32 access_ready;
|
|
struct int_st_t int_st;
|
|
struct int_clr_t int_clr;
|
|
struct int_en_t int_en;
|
|
u32 reserved0;
|
|
u32 chcomb_int_st[MHUV2_CMB_INT_ST_REG_CNT];
|
|
u8 pad[0xFC8 - 0xFB0];
|
|
struct iidr_t iidr;
|
|
struct aidr_t aidr;
|
|
} __packed;
|
|
|
|
/* Receiver Channel Window fields */
|
|
struct mhu2_recv_ch_wn_reg {
|
|
u32 stat;
|
|
u32 stat_masked;
|
|
u32 stat_clear;
|
|
u8 reserved0[0x10 - 0x0C];
|
|
u32 mask;
|
|
u32 mask_set;
|
|
u32 mask_clear;
|
|
u8 pad[0x20 - 0x1C];
|
|
} __packed;
|
|
|
|
/* Receiver frame register fields */
|
|
struct mhu2_recv_frame_reg {
|
|
struct mhu2_recv_ch_wn_reg ch_wn[MHUV2_CH_WN_MAX];
|
|
struct mhu_cfg_t mhu_cfg;
|
|
u8 reserved0[0xF90 - 0xF84];
|
|
struct int_st_t int_st;
|
|
struct int_clr_t int_clr;
|
|
struct int_en_t int_en;
|
|
u32 pad;
|
|
u32 chcomb_int_st[MHUV2_CMB_INT_ST_REG_CNT];
|
|
u8 reserved2[0xFC8 - 0xFB0];
|
|
struct iidr_t iidr;
|
|
struct aidr_t aidr;
|
|
} __packed;
|
|
|
|
|
|
/* ====== MHUv2 data structures ====== */
|
|
|
|
enum mhuv2_transport_protocol {
|
|
DOORBELL = 0,
|
|
DATA_TRANSFER = 1
|
|
};
|
|
|
|
enum mhuv2_frame {
|
|
RECEIVER_FRAME,
|
|
SENDER_FRAME
|
|
};
|
|
|
|
/**
|
|
* struct mhuv2 - MHUv2 mailbox controller data
|
|
*
|
|
* @mbox: Mailbox controller belonging to the MHU frame.
|
|
* @send: Base address of the register mapping region.
|
|
* @recv: Base address of the register mapping region.
|
|
* @frame: Frame type: RECEIVER_FRAME or SENDER_FRAME.
|
|
* @irq: Interrupt.
|
|
* @windows: Channel windows implemented by the platform.
|
|
* @minor: Minor version of the controller.
|
|
* @length: Length of the protocols array in bytes.
|
|
* @protocols: Raw protocol information, derived from device tree.
|
|
* @doorbell_pending_lock: spinlock required for correct operation of Tx
|
|
* interrupt for doorbells.
|
|
*/
|
|
struct mhuv2 {
|
|
struct mbox_controller mbox;
|
|
union {
|
|
struct mhu2_send_frame_reg __iomem *send;
|
|
struct mhu2_recv_frame_reg __iomem *recv;
|
|
};
|
|
enum mhuv2_frame frame;
|
|
unsigned int irq;
|
|
unsigned int windows;
|
|
unsigned int minor;
|
|
unsigned int length;
|
|
u32 *protocols;
|
|
|
|
spinlock_t doorbell_pending_lock;
|
|
};
|
|
|
|
#define mhu_from_mbox(_mbox) container_of(_mbox, struct mhuv2, mbox)
|
|
|
|
/**
|
|
* struct mhuv2_protocol_ops - MHUv2 operations
|
|
*
|
|
* Each transport protocol must provide an implementation of the operations
|
|
* provided here.
|
|
*
|
|
* @rx_startup: Startup callback for receiver.
|
|
* @rx_shutdown: Shutdown callback for receiver.
|
|
* @read_data: Reads and clears newly available data.
|
|
* @tx_startup: Startup callback for receiver.
|
|
* @tx_shutdown: Shutdown callback for receiver.
|
|
* @last_tx_done: Report back if the last tx is completed or not.
|
|
* @send_data: Send data to the receiver.
|
|
*/
|
|
struct mhuv2_protocol_ops {
|
|
int (*rx_startup)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
void (*rx_shutdown)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
void *(*read_data)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
|
|
void (*tx_startup)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
void (*tx_shutdown)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
int (*last_tx_done)(struct mhuv2 *mhu, struct mbox_chan *chan);
|
|
int (*send_data)(struct mhuv2 *mhu, struct mbox_chan *chan, void *arg);
|
|
};
|
|
|
|
/*
|
|
* MHUv2 mailbox channel's private information
|
|
*
|
|
* @ops: protocol specific ops for the channel.
|
|
* @ch_wn_idx: Channel window index allocated to the channel.
|
|
* @windows: Total number of windows consumed by the channel, only relevant
|
|
* in DATA_TRANSFER protocol.
|
|
* @doorbell: Doorbell bit number within the ch_wn_idx window, only relevant
|
|
* in DOORBELL protocol.
|
|
* @pending: Flag indicating pending doorbell interrupt, only relevant in
|
|
* DOORBELL protocol.
|
|
*/
|
|
struct mhuv2_mbox_chan_priv {
|
|
const struct mhuv2_protocol_ops *ops;
|
|
u32 ch_wn_idx;
|
|
union {
|
|
u32 windows;
|
|
struct {
|
|
u32 doorbell;
|
|
u32 pending;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Macro for reading a bitfield within a physically mapped packed struct */
|
|
#define readl_relaxed_bitfield(_regptr, _type, _field) \
|
|
({ \
|
|
u32 _regval; \
|
|
_regval = readl_relaxed((_regptr)); \
|
|
(*(_type *)(&_regval))._field; \
|
|
})
|
|
|
|
/* Macro for writing a bitfield within a physically mapped packed struct */
|
|
#define writel_relaxed_bitfield(_value, _regptr, _type, _field) \
|
|
({ \
|
|
u32 _regval; \
|
|
_regval = readl_relaxed(_regptr); \
|
|
(*(_type *)(&_regval))._field = _value; \
|
|
writel_relaxed(_regval, _regptr); \
|
|
})
|
|
|
|
|
|
/* =================== Doorbell transport protocol operations =============== */
|
|
|
|
static int mhuv2_doorbell_rx_startup(struct mhuv2 *mhu, struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
writel_relaxed(BIT(priv->doorbell),
|
|
&mhu->recv->ch_wn[priv->ch_wn_idx].mask_clear);
|
|
return 0;
|
|
}
|
|
|
|
static void mhuv2_doorbell_rx_shutdown(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
writel_relaxed(BIT(priv->doorbell),
|
|
&mhu->recv->ch_wn[priv->ch_wn_idx].mask_set);
|
|
}
|
|
|
|
static void *mhuv2_doorbell_read_data(struct mhuv2 *mhu, struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
writel_relaxed(BIT(priv->doorbell),
|
|
&mhu->recv->ch_wn[priv->ch_wn_idx].stat_clear);
|
|
return NULL;
|
|
}
|
|
|
|
static int mhuv2_doorbell_last_tx_done(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
return !(readl_relaxed(&mhu->send->ch_wn[priv->ch_wn_idx].stat) &
|
|
BIT(priv->doorbell));
|
|
}
|
|
|
|
static int mhuv2_doorbell_send_data(struct mhuv2 *mhu, struct mbox_chan *chan,
|
|
void *arg)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mhu->doorbell_pending_lock, flags);
|
|
|
|
priv->pending = 1;
|
|
writel_relaxed(BIT(priv->doorbell),
|
|
&mhu->send->ch_wn[priv->ch_wn_idx].stat_set);
|
|
|
|
spin_unlock_irqrestore(&mhu->doorbell_pending_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mhuv2_protocol_ops mhuv2_doorbell_ops = {
|
|
.rx_startup = mhuv2_doorbell_rx_startup,
|
|
.rx_shutdown = mhuv2_doorbell_rx_shutdown,
|
|
.read_data = mhuv2_doorbell_read_data,
|
|
.last_tx_done = mhuv2_doorbell_last_tx_done,
|
|
.send_data = mhuv2_doorbell_send_data,
|
|
};
|
|
#define IS_PROTOCOL_DOORBELL(_priv) (_priv->ops == &mhuv2_doorbell_ops)
|
|
|
|
/* ============= Data transfer transport protocol operations ================ */
|
|
|
|
static int mhuv2_data_transfer_rx_startup(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int i = priv->ch_wn_idx + priv->windows - 1;
|
|
|
|
/*
|
|
* The protocol mandates that all but the last status register must be
|
|
* masked.
|
|
*/
|
|
writel_relaxed(0xFFFFFFFF, &mhu->recv->ch_wn[i].mask_clear);
|
|
return 0;
|
|
}
|
|
|
|
static void mhuv2_data_transfer_rx_shutdown(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int i = priv->ch_wn_idx + priv->windows - 1;
|
|
|
|
writel_relaxed(0xFFFFFFFF, &mhu->recv->ch_wn[i].mask_set);
|
|
}
|
|
|
|
static void *mhuv2_data_transfer_read_data(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
const int windows = priv->windows;
|
|
struct arm_mhuv2_mbox_msg *msg;
|
|
u32 *data;
|
|
int i, idx;
|
|
|
|
msg = kzalloc(sizeof(*msg) + windows * MHUV2_STAT_BYTES, GFP_KERNEL);
|
|
if (!msg)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
data = msg->data = msg + 1;
|
|
msg->len = windows * MHUV2_STAT_BYTES;
|
|
|
|
/*
|
|
* Messages are expected in order of most significant word to least
|
|
* significant word. Refer mhuv2_data_transfer_send_data() for more
|
|
* details.
|
|
*
|
|
* We also need to read the stat register instead of stat_masked, as we
|
|
* masked all but the last window.
|
|
*
|
|
* Last channel window must be cleared as the final operation. Upon
|
|
* clearing the last channel window register, which is unmasked in
|
|
* data-transfer protocol, the interrupt is de-asserted.
|
|
*/
|
|
for (i = 0; i < windows; i++) {
|
|
idx = priv->ch_wn_idx + i;
|
|
data[windows - 1 - i] = readl_relaxed(&mhu->recv->ch_wn[idx].stat);
|
|
writel_relaxed(0xFFFFFFFF, &mhu->recv->ch_wn[idx].stat_clear);
|
|
}
|
|
|
|
return msg;
|
|
}
|
|
|
|
static void mhuv2_data_transfer_tx_startup(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int i = priv->ch_wn_idx + priv->windows - 1;
|
|
|
|
/* Enable interrupts only for the last window */
|
|
if (mhu->minor) {
|
|
writel_relaxed(0x1, &mhu->send->ch_wn[i].int_clr);
|
|
writel_relaxed(0x1, &mhu->send->ch_wn[i].int_en);
|
|
}
|
|
}
|
|
|
|
static void mhuv2_data_transfer_tx_shutdown(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int i = priv->ch_wn_idx + priv->windows - 1;
|
|
|
|
if (mhu->minor)
|
|
writel_relaxed(0x0, &mhu->send->ch_wn[i].int_en);
|
|
}
|
|
|
|
static int mhuv2_data_transfer_last_tx_done(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int i = priv->ch_wn_idx + priv->windows - 1;
|
|
|
|
/* Just checking the last channel window should be enough */
|
|
return !readl_relaxed(&mhu->send->ch_wn[i].stat);
|
|
}
|
|
|
|
/*
|
|
* Message will be transmitted from most significant to least significant word.
|
|
* This is to allow for messages shorter than channel windows to still trigger
|
|
* the receiver interrupt which gets activated when the last stat register is
|
|
* written. As an example, a 6-word message is to be written on a 4-channel MHU
|
|
* connection: Registers marked with '*' are masked, and will not generate an
|
|
* interrupt on the receiver side once written.
|
|
*
|
|
* u32 *data = [0x00000001], [0x00000002], [0x00000003], [0x00000004],
|
|
* [0x00000005], [0x00000006]
|
|
*
|
|
* ROUND 1:
|
|
* stat reg To write Write sequence
|
|
* [ stat 3 ] <- [0x00000001] 4 <- triggers interrupt on receiver
|
|
* [ stat 2 ] <- [0x00000002] 3
|
|
* [ stat 1 ] <- [0x00000003] 2
|
|
* [ stat 0 ] <- [0x00000004] 1
|
|
*
|
|
* data += 4 // Increment data pointer by number of stat regs
|
|
*
|
|
* ROUND 2:
|
|
* stat reg To write Write sequence
|
|
* [ stat 3 ] <- [0x00000005] 2 <- triggers interrupt on receiver
|
|
* [ stat 2 ] <- [0x00000006] 1
|
|
* [ stat 1 ] <- [0x00000000]
|
|
* [ stat 0 ] <- [0x00000000]
|
|
*/
|
|
static int mhuv2_data_transfer_send_data(struct mhuv2 *mhu,
|
|
struct mbox_chan *chan, void *arg)
|
|
{
|
|
const struct arm_mhuv2_mbox_msg *msg = arg;
|
|
int bytes_left = msg->len, bytes_to_send, bytes_in_round, i;
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
int windows = priv->windows;
|
|
u32 *data = msg->data, word;
|
|
|
|
while (bytes_left) {
|
|
if (!data[0]) {
|
|
dev_err(mhu->mbox.dev, "Data aligned at first window can't be zero to guarantee interrupt generation at receiver");
|
|
return -EINVAL;
|
|
}
|
|
|
|
while(!mhuv2_data_transfer_last_tx_done(mhu, chan))
|
|
continue;
|
|
|
|
bytes_in_round = min(bytes_left, (int)(windows * MHUV2_STAT_BYTES));
|
|
|
|
for (i = windows - 1; i >= 0; i--) {
|
|
/* Data less than windows can transfer ? */
|
|
if (unlikely(bytes_in_round <= i * MHUV2_STAT_BYTES))
|
|
continue;
|
|
|
|
word = data[i];
|
|
bytes_to_send = bytes_in_round & (MHUV2_STAT_BYTES - 1);
|
|
if (unlikely(bytes_to_send))
|
|
word &= LSB_MASK(bytes_to_send);
|
|
else
|
|
bytes_to_send = MHUV2_STAT_BYTES;
|
|
|
|
writel_relaxed(word, &mhu->send->ch_wn[priv->ch_wn_idx + windows - 1 - i].stat_set);
|
|
bytes_left -= bytes_to_send;
|
|
bytes_in_round -= bytes_to_send;
|
|
}
|
|
|
|
data += windows;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mhuv2_protocol_ops mhuv2_data_transfer_ops = {
|
|
.rx_startup = mhuv2_data_transfer_rx_startup,
|
|
.rx_shutdown = mhuv2_data_transfer_rx_shutdown,
|
|
.read_data = mhuv2_data_transfer_read_data,
|
|
.tx_startup = mhuv2_data_transfer_tx_startup,
|
|
.tx_shutdown = mhuv2_data_transfer_tx_shutdown,
|
|
.last_tx_done = mhuv2_data_transfer_last_tx_done,
|
|
.send_data = mhuv2_data_transfer_send_data,
|
|
};
|
|
|
|
/* Interrupt handlers */
|
|
|
|
static struct mbox_chan *get_irq_chan_comb(struct mhuv2 *mhu, u32 __iomem *reg)
|
|
{
|
|
struct mbox_chan *chans = mhu->mbox.chans;
|
|
int channel = 0, i, offset = 0, windows, protocol, ch_wn;
|
|
u32 stat;
|
|
|
|
for (i = 0; i < MHUV2_CMB_INT_ST_REG_CNT; i++) {
|
|
stat = readl_relaxed(reg + i);
|
|
if (!stat)
|
|
continue;
|
|
|
|
ch_wn = i * MHUV2_STAT_BITS + __builtin_ctz(stat);
|
|
|
|
for (i = 0; i < mhu->length; i += 2) {
|
|
protocol = mhu->protocols[i];
|
|
windows = mhu->protocols[i + 1];
|
|
|
|
if (ch_wn >= offset + windows) {
|
|
if (protocol == DOORBELL)
|
|
channel += MHUV2_STAT_BITS * windows;
|
|
else
|
|
channel++;
|
|
|
|
offset += windows;
|
|
continue;
|
|
}
|
|
|
|
/* Return first chan of the window in doorbell mode */
|
|
if (protocol == DOORBELL)
|
|
channel += MHUV2_STAT_BITS * (ch_wn - offset);
|
|
|
|
return &chans[channel];
|
|
}
|
|
}
|
|
|
|
return ERR_PTR(-EIO);
|
|
}
|
|
|
|
static irqreturn_t mhuv2_sender_interrupt(int irq, void *data)
|
|
{
|
|
struct mhuv2 *mhu = data;
|
|
struct device *dev = mhu->mbox.dev;
|
|
struct mhuv2_mbox_chan_priv *priv;
|
|
struct mbox_chan *chan;
|
|
unsigned long flags;
|
|
int i, found = 0;
|
|
u32 stat;
|
|
|
|
chan = get_irq_chan_comb(mhu, mhu->send->chcomb_int_st);
|
|
if (IS_ERR(chan)) {
|
|
dev_warn(dev, "Failed to find channel for the Tx interrupt\n");
|
|
return IRQ_NONE;
|
|
}
|
|
priv = chan->con_priv;
|
|
|
|
if (!IS_PROTOCOL_DOORBELL(priv)) {
|
|
for (i = 0; i < priv->windows; i++)
|
|
writel_relaxed(1, &mhu->send->ch_wn[priv->ch_wn_idx + i].int_clr);
|
|
|
|
if (chan->cl) {
|
|
mbox_chan_txdone(chan, 0);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
dev_warn(dev, "Tx interrupt Received on channel (%u) not currently attached to a mailbox client\n",
|
|
priv->ch_wn_idx);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* Clear the interrupt first, so we don't miss any doorbell later */
|
|
writel_relaxed(1, &mhu->send->ch_wn[priv->ch_wn_idx].int_clr);
|
|
|
|
/*
|
|
* In Doorbell mode, make sure no new transitions happen while the
|
|
* interrupt handler is trying to find the finished doorbell tx
|
|
* operations, else we may think few of the transfers were complete
|
|
* before they actually were.
|
|
*/
|
|
spin_lock_irqsave(&mhu->doorbell_pending_lock, flags);
|
|
|
|
/*
|
|
* In case of doorbell mode, the first channel of the window is returned
|
|
* by get_irq_chan_comb(). Find all the pending channels here.
|
|
*/
|
|
stat = readl_relaxed(&mhu->send->ch_wn[priv->ch_wn_idx].stat);
|
|
|
|
for (i = 0; i < MHUV2_STAT_BITS; i++) {
|
|
priv = chan[i].con_priv;
|
|
|
|
/* Find cases where pending was 1, but stat's bit is cleared */
|
|
if (priv->pending ^ ((stat >> i) & 0x1)) {
|
|
BUG_ON(!priv->pending);
|
|
|
|
if (!chan->cl) {
|
|
dev_warn(dev, "Tx interrupt received on doorbell (%u : %u) channel not currently attached to a mailbox client\n",
|
|
priv->ch_wn_idx, i);
|
|
continue;
|
|
}
|
|
|
|
mbox_chan_txdone(&chan[i], 0);
|
|
priv->pending = 0;
|
|
found++;
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&mhu->doorbell_pending_lock, flags);
|
|
|
|
if (!found) {
|
|
/*
|
|
* We may have already processed the doorbell in the previous
|
|
* iteration if the interrupt came right after we cleared it but
|
|
* before we read the stat register.
|
|
*/
|
|
dev_dbg(dev, "Couldn't find the doorbell (%u) for the Tx interrupt interrupt\n",
|
|
priv->ch_wn_idx);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct mbox_chan *get_irq_chan_comb_rx(struct mhuv2 *mhu)
|
|
{
|
|
struct mhuv2_mbox_chan_priv *priv;
|
|
struct mbox_chan *chan;
|
|
u32 stat;
|
|
|
|
chan = get_irq_chan_comb(mhu, mhu->recv->chcomb_int_st);
|
|
if (IS_ERR(chan))
|
|
return chan;
|
|
|
|
priv = chan->con_priv;
|
|
if (!IS_PROTOCOL_DOORBELL(priv))
|
|
return chan;
|
|
|
|
/*
|
|
* In case of doorbell mode, the first channel of the window is returned
|
|
* by the routine. Find the exact channel here.
|
|
*/
|
|
stat = readl_relaxed(&mhu->recv->ch_wn[priv->ch_wn_idx].stat_masked);
|
|
BUG_ON(!stat);
|
|
|
|
return chan + __builtin_ctz(stat);
|
|
}
|
|
|
|
static struct mbox_chan *get_irq_chan_stat_rx(struct mhuv2 *mhu)
|
|
{
|
|
struct mbox_chan *chans = mhu->mbox.chans;
|
|
struct mhuv2_mbox_chan_priv *priv;
|
|
u32 stat;
|
|
int i = 0;
|
|
|
|
while (i < mhu->mbox.num_chans) {
|
|
priv = chans[i].con_priv;
|
|
stat = readl_relaxed(&mhu->recv->ch_wn[priv->ch_wn_idx].stat_masked);
|
|
|
|
if (stat) {
|
|
if (IS_PROTOCOL_DOORBELL(priv))
|
|
i += __builtin_ctz(stat);
|
|
return &chans[i];
|
|
}
|
|
|
|
i += IS_PROTOCOL_DOORBELL(priv) ? MHUV2_STAT_BITS : 1;
|
|
}
|
|
|
|
return ERR_PTR(-EIO);
|
|
}
|
|
|
|
static struct mbox_chan *get_irq_chan_rx(struct mhuv2 *mhu)
|
|
{
|
|
if (!mhu->minor)
|
|
return get_irq_chan_stat_rx(mhu);
|
|
|
|
return get_irq_chan_comb_rx(mhu);
|
|
}
|
|
|
|
static irqreturn_t mhuv2_receiver_interrupt(int irq, void *arg)
|
|
{
|
|
struct mhuv2 *mhu = arg;
|
|
struct mbox_chan *chan = get_irq_chan_rx(mhu);
|
|
struct device *dev = mhu->mbox.dev;
|
|
struct mhuv2_mbox_chan_priv *priv;
|
|
int ret = IRQ_NONE;
|
|
void *data;
|
|
|
|
if (IS_ERR(chan)) {
|
|
dev_warn(dev, "Failed to find channel for the rx interrupt\n");
|
|
return IRQ_NONE;
|
|
}
|
|
priv = chan->con_priv;
|
|
|
|
/* Read and clear the data first */
|
|
data = priv->ops->read_data(mhu, chan);
|
|
|
|
if (!chan->cl) {
|
|
dev_warn(dev, "Received data on channel (%u) not currently attached to a mailbox client\n",
|
|
priv->ch_wn_idx);
|
|
} else if (IS_ERR(data)) {
|
|
dev_err(dev, "Failed to read data: %lu\n", PTR_ERR(data));
|
|
} else {
|
|
mbox_chan_received_data(chan, data);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if (!IS_ERR(data))
|
|
kfree(data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Sender and receiver ops */
|
|
static bool mhuv2_sender_last_tx_done(struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
return priv->ops->last_tx_done(mhu, chan);
|
|
}
|
|
|
|
static int mhuv2_sender_send_data(struct mbox_chan *chan, void *data)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
if (!priv->ops->last_tx_done(mhu, chan))
|
|
return -EBUSY;
|
|
|
|
return priv->ops->send_data(mhu, chan, data);
|
|
}
|
|
|
|
static int mhuv2_sender_startup(struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
if (priv->ops->tx_startup)
|
|
priv->ops->tx_startup(mhu, chan);
|
|
return 0;
|
|
}
|
|
|
|
static void mhuv2_sender_shutdown(struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
if (priv->ops->tx_shutdown)
|
|
priv->ops->tx_shutdown(mhu, chan);
|
|
}
|
|
|
|
static const struct mbox_chan_ops mhuv2_sender_ops = {
|
|
.send_data = mhuv2_sender_send_data,
|
|
.startup = mhuv2_sender_startup,
|
|
.shutdown = mhuv2_sender_shutdown,
|
|
.last_tx_done = mhuv2_sender_last_tx_done,
|
|
};
|
|
|
|
static int mhuv2_receiver_startup(struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
return priv->ops->rx_startup(mhu, chan);
|
|
}
|
|
|
|
static void mhuv2_receiver_shutdown(struct mbox_chan *chan)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(chan->mbox);
|
|
struct mhuv2_mbox_chan_priv *priv = chan->con_priv;
|
|
|
|
priv->ops->rx_shutdown(mhu, chan);
|
|
}
|
|
|
|
static int mhuv2_receiver_send_data(struct mbox_chan *chan, void *data)
|
|
{
|
|
dev_err(chan->mbox->dev,
|
|
"Trying to transmit on a receiver MHU frame\n");
|
|
return -EIO;
|
|
}
|
|
|
|
static bool mhuv2_receiver_last_tx_done(struct mbox_chan *chan)
|
|
{
|
|
dev_err(chan->mbox->dev, "Trying to Tx poll on a receiver MHU frame\n");
|
|
return true;
|
|
}
|
|
|
|
static const struct mbox_chan_ops mhuv2_receiver_ops = {
|
|
.send_data = mhuv2_receiver_send_data,
|
|
.startup = mhuv2_receiver_startup,
|
|
.shutdown = mhuv2_receiver_shutdown,
|
|
.last_tx_done = mhuv2_receiver_last_tx_done,
|
|
};
|
|
|
|
static struct mbox_chan *mhuv2_mbox_of_xlate(struct mbox_controller *mbox,
|
|
const struct of_phandle_args *pa)
|
|
{
|
|
struct mhuv2 *mhu = mhu_from_mbox(mbox);
|
|
struct mbox_chan *chans = mbox->chans;
|
|
int channel = 0, i, offset, doorbell, protocol, windows;
|
|
|
|
if (pa->args_count != 2)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
offset = pa->args[0];
|
|
doorbell = pa->args[1];
|
|
if (doorbell >= MHUV2_STAT_BITS)
|
|
goto out;
|
|
|
|
for (i = 0; i < mhu->length; i += 2) {
|
|
protocol = mhu->protocols[i];
|
|
windows = mhu->protocols[i + 1];
|
|
|
|
if (protocol == DOORBELL) {
|
|
if (offset < windows)
|
|
return &chans[channel + MHUV2_STAT_BITS * offset + doorbell];
|
|
|
|
channel += MHUV2_STAT_BITS * windows;
|
|
offset -= windows;
|
|
} else {
|
|
if (offset == 0) {
|
|
if (doorbell)
|
|
goto out;
|
|
|
|
return &chans[channel];
|
|
}
|
|
|
|
channel++;
|
|
offset--;
|
|
}
|
|
}
|
|
|
|
out:
|
|
dev_err(mbox->dev, "Couldn't xlate to a valid channel (%d: %d)\n",
|
|
pa->args[0], doorbell);
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
static int mhuv2_verify_protocol(struct mhuv2 *mhu)
|
|
{
|
|
struct device *dev = mhu->mbox.dev;
|
|
int protocol, windows, channels = 0, total_windows = 0, i;
|
|
|
|
for (i = 0; i < mhu->length; i += 2) {
|
|
protocol = mhu->protocols[i];
|
|
windows = mhu->protocols[i + 1];
|
|
|
|
if (!windows) {
|
|
dev_err(dev, "Window size can't be zero (%d)\n", i);
|
|
return -EINVAL;
|
|
}
|
|
total_windows += windows;
|
|
|
|
if (protocol == DOORBELL) {
|
|
channels += MHUV2_STAT_BITS * windows;
|
|
} else if (protocol == DATA_TRANSFER) {
|
|
channels++;
|
|
} else {
|
|
dev_err(dev, "Invalid protocol (%d) present in %s property at index %d\n",
|
|
protocol, MHUV2_PROTOCOL_PROP, i);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (total_windows > mhu->windows) {
|
|
dev_err(dev, "Channel windows can't be more than what's implemented by the hardware ( %d: %d)\n",
|
|
total_windows, mhu->windows);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mhu->mbox.num_chans = channels;
|
|
return 0;
|
|
}
|
|
|
|
static int mhuv2_allocate_channels(struct mhuv2 *mhu)
|
|
{
|
|
struct mbox_controller *mbox = &mhu->mbox;
|
|
struct mhuv2_mbox_chan_priv *priv;
|
|
struct device *dev = mbox->dev;
|
|
struct mbox_chan *chans;
|
|
int protocol, windows = 0, next_window = 0, i, j, k;
|
|
|
|
chans = devm_kcalloc(dev, mbox->num_chans, sizeof(*chans), GFP_KERNEL);
|
|
if (!chans)
|
|
return -ENOMEM;
|
|
|
|
mbox->chans = chans;
|
|
|
|
for (i = 0; i < mhu->length; i += 2) {
|
|
next_window += windows;
|
|
|
|
protocol = mhu->protocols[i];
|
|
windows = mhu->protocols[i + 1];
|
|
|
|
if (protocol == DATA_TRANSFER) {
|
|
priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->ch_wn_idx = next_window;
|
|
priv->ops = &mhuv2_data_transfer_ops;
|
|
priv->windows = windows;
|
|
chans++->con_priv = priv;
|
|
continue;
|
|
}
|
|
|
|
for (j = 0; j < windows; j++) {
|
|
for (k = 0; k < MHUV2_STAT_BITS; k++) {
|
|
priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->ch_wn_idx = next_window + j;
|
|
priv->ops = &mhuv2_doorbell_ops;
|
|
priv->doorbell = k;
|
|
chans++->con_priv = priv;
|
|
}
|
|
|
|
/*
|
|
* Permanently enable interrupt as we can't
|
|
* control it per doorbell.
|
|
*/
|
|
if (mhu->frame == SENDER_FRAME && mhu->minor)
|
|
writel_relaxed(0x1, &mhu->send->ch_wn[priv->ch_wn_idx].int_en);
|
|
}
|
|
}
|
|
|
|
/* Make sure we have initialized all channels */
|
|
BUG_ON(chans - mbox->chans != mbox->num_chans);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mhuv2_parse_channels(struct mhuv2 *mhu)
|
|
{
|
|
struct device *dev = mhu->mbox.dev;
|
|
const struct device_node *np = dev->of_node;
|
|
int ret, count;
|
|
u32 *protocols;
|
|
|
|
count = of_property_count_u32_elems(np, MHUV2_PROTOCOL_PROP);
|
|
if (count <= 0 || count % 2) {
|
|
dev_err(dev, "Invalid %s property (%d)\n", MHUV2_PROTOCOL_PROP,
|
|
count);
|
|
return -EINVAL;
|
|
}
|
|
|
|
protocols = devm_kmalloc_array(dev, count, sizeof(*protocols), GFP_KERNEL);
|
|
if (!protocols)
|
|
return -ENOMEM;
|
|
|
|
ret = of_property_read_u32_array(np, MHUV2_PROTOCOL_PROP, protocols, count);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to read %s property: %d\n",
|
|
MHUV2_PROTOCOL_PROP, ret);
|
|
return ret;
|
|
}
|
|
|
|
mhu->protocols = protocols;
|
|
mhu->length = count;
|
|
|
|
ret = mhuv2_verify_protocol(mhu);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mhuv2_allocate_channels(mhu);
|
|
}
|
|
|
|
static int mhuv2_tx_init(struct amba_device *adev, struct mhuv2 *mhu,
|
|
void __iomem *reg)
|
|
{
|
|
struct device *dev = mhu->mbox.dev;
|
|
int ret, i;
|
|
|
|
mhu->frame = SENDER_FRAME;
|
|
mhu->mbox.ops = &mhuv2_sender_ops;
|
|
mhu->send = reg;
|
|
|
|
mhu->windows = readl_relaxed_bitfield(&mhu->send->mhu_cfg, struct mhu_cfg_t, num_ch);
|
|
mhu->minor = readl_relaxed_bitfield(&mhu->send->aidr, struct aidr_t, arch_minor_rev);
|
|
|
|
spin_lock_init(&mhu->doorbell_pending_lock);
|
|
|
|
/*
|
|
* For minor version 1 and forward, tx interrupt is provided by
|
|
* the controller.
|
|
*/
|
|
if (mhu->minor && adev->irq[0]) {
|
|
ret = devm_request_threaded_irq(dev, adev->irq[0], NULL,
|
|
mhuv2_sender_interrupt,
|
|
IRQF_ONESHOT, "mhuv2-tx", mhu);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to request tx IRQ, fallback to polling mode: %d\n",
|
|
ret);
|
|
} else {
|
|
mhu->mbox.txdone_irq = true;
|
|
mhu->mbox.txdone_poll = false;
|
|
mhu->irq = adev->irq[0];
|
|
|
|
writel_relaxed_bitfield(1, &mhu->send->int_en, struct int_en_t, chcomb);
|
|
|
|
/* Disable all channel interrupts */
|
|
for (i = 0; i < mhu->windows; i++)
|
|
writel_relaxed(0x0, &mhu->send->ch_wn[i].int_en);
|
|
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
mhu->mbox.txdone_irq = false;
|
|
mhu->mbox.txdone_poll = true;
|
|
mhu->mbox.txpoll_period = 1;
|
|
|
|
out:
|
|
/* Wait for receiver to be ready */
|
|
writel_relaxed(0x1, &mhu->send->access_request);
|
|
while (!readl_relaxed(&mhu->send->access_ready))
|
|
continue;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mhuv2_rx_init(struct amba_device *adev, struct mhuv2 *mhu,
|
|
void __iomem *reg)
|
|
{
|
|
struct device *dev = mhu->mbox.dev;
|
|
int ret, i;
|
|
|
|
mhu->frame = RECEIVER_FRAME;
|
|
mhu->mbox.ops = &mhuv2_receiver_ops;
|
|
mhu->recv = reg;
|
|
|
|
mhu->windows = readl_relaxed_bitfield(&mhu->recv->mhu_cfg, struct mhu_cfg_t, num_ch);
|
|
mhu->minor = readl_relaxed_bitfield(&mhu->recv->aidr, struct aidr_t, arch_minor_rev);
|
|
|
|
mhu->irq = adev->irq[0];
|
|
if (!mhu->irq) {
|
|
dev_err(dev, "Missing receiver IRQ\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(dev, mhu->irq, NULL,
|
|
mhuv2_receiver_interrupt, IRQF_ONESHOT,
|
|
"mhuv2-rx", mhu);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to request rx IRQ\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Mask all the channel windows */
|
|
for (i = 0; i < mhu->windows; i++)
|
|
writel_relaxed(0xFFFFFFFF, &mhu->recv->ch_wn[i].mask_set);
|
|
|
|
if (mhu->minor)
|
|
writel_relaxed_bitfield(1, &mhu->recv->int_en, struct int_en_t, chcomb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mhuv2_probe(struct amba_device *adev, const struct amba_id *id)
|
|
{
|
|
struct device *dev = &adev->dev;
|
|
const struct device_node *np = dev->of_node;
|
|
struct mhuv2 *mhu;
|
|
void __iomem *reg;
|
|
int ret = -EINVAL;
|
|
|
|
reg = devm_of_iomap(dev, dev->of_node, 0, NULL);
|
|
if (IS_ERR(reg))
|
|
return PTR_ERR(reg);
|
|
|
|
mhu = devm_kzalloc(dev, sizeof(*mhu), GFP_KERNEL);
|
|
if (!mhu)
|
|
return -ENOMEM;
|
|
|
|
mhu->mbox.dev = dev;
|
|
mhu->mbox.of_xlate = mhuv2_mbox_of_xlate;
|
|
|
|
if (of_device_is_compatible(np, "arm,mhuv2-tx"))
|
|
ret = mhuv2_tx_init(adev, mhu, reg);
|
|
else if (of_device_is_compatible(np, "arm,mhuv2-rx"))
|
|
ret = mhuv2_rx_init(adev, mhu, reg);
|
|
else
|
|
dev_err(dev, "Invalid compatible property\n");
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Channel windows can't be 0 */
|
|
BUG_ON(!mhu->windows);
|
|
|
|
ret = mhuv2_parse_channels(mhu);
|
|
if (ret)
|
|
return ret;
|
|
|
|
amba_set_drvdata(adev, mhu);
|
|
|
|
ret = devm_mbox_controller_register(dev, &mhu->mbox);
|
|
if (ret)
|
|
dev_err(dev, "failed to register ARM MHUv2 driver %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mhuv2_remove(struct amba_device *adev)
|
|
{
|
|
struct mhuv2 *mhu = amba_get_drvdata(adev);
|
|
|
|
if (mhu->frame == SENDER_FRAME)
|
|
writel_relaxed(0x0, &mhu->send->access_request);
|
|
}
|
|
|
|
static struct amba_id mhuv2_ids[] = {
|
|
{
|
|
/* 2.0 */
|
|
.id = 0xbb0d1,
|
|
.mask = 0xfffff,
|
|
},
|
|
{
|
|
/* 2.1 */
|
|
.id = 0xbb076,
|
|
.mask = 0xfffff,
|
|
},
|
|
{ 0, 0 },
|
|
};
|
|
MODULE_DEVICE_TABLE(amba, mhuv2_ids);
|
|
|
|
static struct amba_driver mhuv2_driver = {
|
|
.drv = {
|
|
.name = "arm-mhuv2",
|
|
},
|
|
.id_table = mhuv2_ids,
|
|
.probe = mhuv2_probe,
|
|
.remove = mhuv2_remove,
|
|
};
|
|
module_amba_driver(mhuv2_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("ARM MHUv2 Driver");
|
|
MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
|
|
MODULE_AUTHOR("Tushar Khandelwal <tushar.khandelwal@arm.com>");
|