mirror of
https://github.com/torvalds/linux.git
synced 2024-12-22 19:01:37 +00:00
b37b62fea1
The 'XFP' driver is really a driver for the QT2022C2 and QT2025C PHYs, covering both more and less than XFP. Rename its functions and constants to reflect reality and to reduce namespace pollution when sfc is a built-in driver. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
251 lines
6.4 KiB
C
251 lines
6.4 KiB
C
/****************************************************************************
|
|
* Driver for Solarflare Solarstorm network controllers and boards
|
|
* Copyright 2006-2008 Solarflare Communications Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation, incorporated herein by reference.
|
|
*/
|
|
/*
|
|
* Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details
|
|
*/
|
|
|
|
#include <linux/timer.h>
|
|
#include <linux/delay.h>
|
|
#include "efx.h"
|
|
#include "mdio_10g.h"
|
|
#include "phy.h"
|
|
#include "falcon.h"
|
|
|
|
#define QT202X_REQUIRED_DEVS (MDIO_DEVS_PCS | \
|
|
MDIO_DEVS_PMAPMD | \
|
|
MDIO_DEVS_PHYXS)
|
|
|
|
#define QT202X_LOOPBACKS ((1 << LOOPBACK_PCS) | \
|
|
(1 << LOOPBACK_PMAPMD) | \
|
|
(1 << LOOPBACK_NETWORK))
|
|
|
|
/****************************************************************************/
|
|
/* Quake-specific MDIO registers */
|
|
#define MDIO_QUAKE_LED0_REG (0xD006)
|
|
|
|
/* QT2025C only */
|
|
#define PCS_FW_HEARTBEAT_REG 0xd7ee
|
|
#define PCS_FW_HEARTB_LBN 0
|
|
#define PCS_FW_HEARTB_WIDTH 8
|
|
#define PCS_UC8051_STATUS_REG 0xd7fd
|
|
#define PCS_UC_STATUS_LBN 0
|
|
#define PCS_UC_STATUS_WIDTH 8
|
|
#define PCS_UC_STATUS_FW_SAVE 0x20
|
|
#define PMA_PMD_FTX_CTRL2_REG 0xc309
|
|
#define PMA_PMD_FTX_STATIC_LBN 13
|
|
#define PMA_PMD_VEND1_REG 0xc001
|
|
#define PMA_PMD_VEND1_LBTXD_LBN 15
|
|
#define PCS_VEND1_REG 0xc000
|
|
#define PCS_VEND1_LBTXD_LBN 5
|
|
|
|
void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode)
|
|
{
|
|
int addr = MDIO_QUAKE_LED0_REG + led;
|
|
efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
|
|
}
|
|
|
|
struct qt202x_phy_data {
|
|
enum efx_phy_mode phy_mode;
|
|
};
|
|
|
|
#define QT2022C2_MAX_RESET_TIME 500
|
|
#define QT2022C2_RESET_WAIT 10
|
|
|
|
static int qt2025c_wait_reset(struct efx_nic *efx)
|
|
{
|
|
unsigned long timeout = jiffies + 10 * HZ;
|
|
int reg, old_counter = 0;
|
|
|
|
/* Wait for firmware heartbeat to start */
|
|
for (;;) {
|
|
int counter;
|
|
reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG);
|
|
if (reg < 0)
|
|
return reg;
|
|
counter = ((reg >> PCS_FW_HEARTB_LBN) &
|
|
((1 << PCS_FW_HEARTB_WIDTH) - 1));
|
|
if (old_counter == 0)
|
|
old_counter = counter;
|
|
else if (counter != old_counter)
|
|
break;
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIMEDOUT;
|
|
msleep(10);
|
|
}
|
|
|
|
/* Wait for firmware status to look good */
|
|
for (;;) {
|
|
reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
|
|
if (reg < 0)
|
|
return reg;
|
|
if ((reg &
|
|
((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >=
|
|
PCS_UC_STATUS_FW_SAVE)
|
|
break;
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIMEDOUT;
|
|
msleep(100);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qt202x_reset_phy(struct efx_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
if (efx->phy_type == PHY_TYPE_QT2025C) {
|
|
/* Wait for the reset triggered by falcon_reset_hw()
|
|
* to complete */
|
|
rc = qt2025c_wait_reset(efx);
|
|
if (rc < 0)
|
|
goto fail;
|
|
} else {
|
|
/* Reset the PHYXS MMD. This is documented as doing
|
|
* a complete soft reset. */
|
|
rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
|
|
QT2022C2_MAX_RESET_TIME /
|
|
QT2022C2_RESET_WAIT,
|
|
QT2022C2_RESET_WAIT);
|
|
if (rc < 0)
|
|
goto fail;
|
|
}
|
|
|
|
/* Wait 250ms for the PHY to complete bootup */
|
|
msleep(250);
|
|
|
|
/* Check that all the MMDs we expect are present and responding. We
|
|
* expect faults on some if the link is down, but not on the PHY XS */
|
|
rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
|
|
if (rc < 0)
|
|
goto fail;
|
|
|
|
efx->board_info.init_leds(efx);
|
|
|
|
return rc;
|
|
|
|
fail:
|
|
EFX_ERR(efx, "PHY reset timed out\n");
|
|
return rc;
|
|
}
|
|
|
|
static int qt202x_phy_init(struct efx_nic *efx)
|
|
{
|
|
struct qt202x_phy_data *phy_data;
|
|
u32 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
|
|
int rc;
|
|
|
|
phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
|
|
if (!phy_data)
|
|
return -ENOMEM;
|
|
efx->phy_data = phy_data;
|
|
|
|
EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
|
|
devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
|
|
efx_mdio_id_rev(devid));
|
|
|
|
phy_data->phy_mode = efx->phy_mode;
|
|
|
|
rc = qt202x_reset_phy(efx);
|
|
|
|
EFX_INFO(efx, "PHY init %s.\n",
|
|
rc ? "failed" : "successful");
|
|
if (rc < 0)
|
|
goto fail;
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
kfree(efx->phy_data);
|
|
efx->phy_data = NULL;
|
|
return rc;
|
|
}
|
|
|
|
static void qt202x_phy_clear_interrupt(struct efx_nic *efx)
|
|
{
|
|
/* Read to clear link status alarm */
|
|
efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT);
|
|
}
|
|
|
|
static int qt202x_link_ok(struct efx_nic *efx)
|
|
{
|
|
return efx_mdio_links_ok(efx, QT202X_REQUIRED_DEVS);
|
|
}
|
|
|
|
static void qt202x_phy_poll(struct efx_nic *efx)
|
|
{
|
|
int link_up = qt202x_link_ok(efx);
|
|
/* Simulate a PHY event if link state has changed */
|
|
if (link_up != efx->link_up)
|
|
falcon_sim_phy_event(efx);
|
|
}
|
|
|
|
static void qt202x_phy_reconfigure(struct efx_nic *efx)
|
|
{
|
|
struct qt202x_phy_data *phy_data = efx->phy_data;
|
|
|
|
if (efx->phy_type == PHY_TYPE_QT2025C) {
|
|
/* There are several different register bits which can
|
|
* disable TX (and save power) on direct-attach cables
|
|
* or optical transceivers, varying somewhat between
|
|
* firmware versions. Only 'static mode' appears to
|
|
* cover everything. */
|
|
mdio_set_flag(
|
|
&efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD,
|
|
PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN,
|
|
efx->phy_mode & PHY_MODE_TX_DISABLED ||
|
|
efx->phy_mode & PHY_MODE_LOW_POWER ||
|
|
efx->loopback_mode == LOOPBACK_PCS ||
|
|
efx->loopback_mode == LOOPBACK_PMAPMD);
|
|
} else {
|
|
/* Reset the PHY when moving from tx off to tx on */
|
|
if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
|
|
(phy_data->phy_mode & PHY_MODE_TX_DISABLED))
|
|
qt202x_reset_phy(efx);
|
|
|
|
efx_mdio_transmit_disable(efx);
|
|
}
|
|
|
|
efx_mdio_phy_reconfigure(efx);
|
|
|
|
phy_data->phy_mode = efx->phy_mode;
|
|
efx->link_up = qt202x_link_ok(efx);
|
|
efx->link_speed = 10000;
|
|
efx->link_fd = true;
|
|
efx->link_fc = efx->wanted_fc;
|
|
}
|
|
|
|
static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
|
|
{
|
|
mdio45_ethtool_gset(&efx->mdio, ecmd);
|
|
}
|
|
|
|
static void qt202x_phy_fini(struct efx_nic *efx)
|
|
{
|
|
/* Clobber the LED if it was blinking */
|
|
efx->board_info.blink(efx, false);
|
|
|
|
/* Free the context block */
|
|
kfree(efx->phy_data);
|
|
efx->phy_data = NULL;
|
|
}
|
|
|
|
struct efx_phy_operations falcon_qt202x_phy_ops = {
|
|
.macs = EFX_XMAC,
|
|
.init = qt202x_phy_init,
|
|
.reconfigure = qt202x_phy_reconfigure,
|
|
.poll = qt202x_phy_poll,
|
|
.fini = qt202x_phy_fini,
|
|
.clear_interrupt = qt202x_phy_clear_interrupt,
|
|
.get_settings = qt202x_phy_get_settings,
|
|
.set_settings = efx_mdio_set_settings,
|
|
.mmds = QT202X_REQUIRED_DEVS,
|
|
.loopbacks = QT202X_LOOPBACKS,
|
|
};
|