linux/drivers/remoteproc/xlnx_r5_remoteproc.c

// SPDX-License-Identifier: GPL-2.0
/*
 * ZynqMP R5 Remote Processor driver
 *
 */

#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <linux/dma-mapping.h>
#include <linux/firmware/xlnx-zynqmp.h>
#include <linux/kernel.h>
#include <linux/mailbox_client.h>
#include <linux/mailbox/zynqmp-ipi-message.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/remoteproc.h>

#include "remoteproc_internal.h"

/* IPI buffer MAX length */
#define IPI_BUF_LEN_MAX	32U

/* RX mailbox client buffer max length */
#define MBOX_CLIENT_BUF_MAX	(IPI_BUF_LEN_MAX + \
				 sizeof(struct zynqmp_ipi_message))

#define RSC_TBL_XLNX_MAGIC	((uint32_t)'x' << 24 | (uint32_t)'a' << 16 | \
				 (uint32_t)'m' << 8 | (uint32_t)'p')

/*
 * settings for RPU cluster mode which
 * reflects possible values of xlnx,cluster-mode dt-property
 */
enum zynqmp_r5_cluster_mode {
	SPLIT_MODE = 0, /* When cores run as separate processor */
	LOCKSTEP_MODE = 1, /* cores execute same code in lockstep,clk-for-clk */
	SINGLE_CPU_MODE = 2, /* core0 is held in reset and only core1 runs */
};

/**
 * struct mem_bank_data - Memory Bank description
 *
 * @addr: Start address of memory bank
 * @da: device address
 * @size: Size of Memory bank
 * @pm_domain_id: Power-domains id of memory bank for firmware to turn on/off
 * @bank_name: name of the bank for remoteproc framework
 */
struct mem_bank_data {
	phys_addr_t addr;
	u32 da;
	size_t size;
	u32 pm_domain_id;
	char *bank_name;
};

/**
 * struct zynqmp_sram_bank - sram bank description
 *
 * @sram_res: sram address region information
 * @da: device address of sram
 */
struct zynqmp_sram_bank {
	struct resource sram_res;
	u32 da;
};

/**
 * struct mbox_info
 *
 * @rx_mc_buf: to copy data from mailbox rx channel
 * @tx_mc_buf: to copy data to mailbox tx channel
 * @r5_core: this mailbox's corresponding r5_core pointer
 * @mbox_work: schedule work after receiving data from mailbox
 * @mbox_cl: mailbox client
 * @tx_chan: mailbox tx channel
 * @rx_chan: mailbox rx channel
 */
struct mbox_info {
	unsigned char rx_mc_buf[MBOX_CLIENT_BUF_MAX];
	unsigned char tx_mc_buf[MBOX_CLIENT_BUF_MAX];
	struct zynqmp_r5_core *r5_core;
	struct work_struct mbox_work;
	struct mbox_client mbox_cl;
	struct mbox_chan *tx_chan;
	struct mbox_chan *rx_chan;
};

/**
 * struct rsc_tbl_data
 *
 * Platform specific data structure used to sync resource table address.
 * It's important to maintain order and size of each field on remote side.
 *
 * @version: version of data structure
 * @magic_num: 32-bit magic number.
 * @comp_magic_num: complement of above magic number
 * @rsc_tbl_size: resource table size
 * @rsc_tbl: resource table address
 */
struct rsc_tbl_data {
	const int version;
	const u32 magic_num;
	const u32 comp_magic_num;
	const u32 rsc_tbl_size;
	const uintptr_t rsc_tbl;
} __packed;

/*
 * Hardcoded TCM bank values. This will stay in driver to maintain backward
 * compatibility with device-tree that does not have TCM information.
 */
static const struct mem_bank_data zynqmp_tcm_banks_split[] = {
	{0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
	{0xffe20000UL, 0x20000, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
	{0xffe90000UL, 0x0, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
	{0xffeb0000UL, 0x20000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
};

/* In lockstep mode cluster uses each 64KB TCM from second core as well */
static const struct mem_bank_data zynqmp_tcm_banks_lockstep[] = {
	{0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
	{0xffe20000UL, 0x20000, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
	{0xffe10000UL, 0x10000, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
	{0xffe30000UL, 0x30000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
};

/**
 * struct zynqmp_r5_core
 *
 * @rsc_tbl_va: resource table virtual address
 * @sram: Array of sram memories assigned to this core
 * @num_sram: number of sram for this core
 * @dev: device of RPU instance
 * @np: device node of RPU instance
 * @tcm_bank_count: number TCM banks accessible to this RPU
 * @tcm_banks: array of each TCM bank data
 * @rproc: rproc handle
 * @rsc_tbl_size: resource table size retrieved from remote
 * @pm_domain_id: RPU CPU power domain id
 * @ipi: pointer to mailbox information
 */
struct zynqmp_r5_core {
	void __iomem *rsc_tbl_va;
	struct zynqmp_sram_bank *sram;
	int num_sram;
	struct device *dev;
	struct device_node *np;
	int tcm_bank_count;
	struct mem_bank_data **tcm_banks;
	struct rproc *rproc;
	u32 rsc_tbl_size;
	u32 pm_domain_id;
	struct mbox_info *ipi;
};

/**
 * struct zynqmp_r5_cluster
 *
 * @dev: r5f subsystem cluster device node
 * @mode: cluster mode of type zynqmp_r5_cluster_mode
 * @core_count: number of r5 cores used for this cluster mode
 * @r5_cores: Array of pointers pointing to r5 core
 */
struct zynqmp_r5_cluster {
	struct device *dev;
	enum  zynqmp_r5_cluster_mode mode;
	int core_count;
	struct zynqmp_r5_core **r5_cores;
};

/**
 * event_notified_idr_cb() - callback for vq_interrupt per notifyid
 * @id: rproc->notify id
 * @ptr: pointer to idr private data
 * @data: data passed to idr_for_each callback
 *
 * Pass notification to remoteproc virtio
 *
 * Return: 0. having return is to satisfy the idr_for_each() function
 *          pointer input argument requirement.
 **/
static int event_notified_idr_cb(int id, void *ptr, void *data)
{
	struct rproc *rproc = data;

	if (rproc_vq_interrupt(rproc, id) == IRQ_NONE)
		dev_dbg(&rproc->dev, "data not found for vqid=%d\n", id);

	return 0;
}

/**
 * handle_event_notified() - remoteproc notification work function
 * @work: pointer to the work structure
 *
 * It checks each registered remoteproc notify IDs.
 */
static void handle_event_notified(struct work_struct *work)
{
	struct mbox_info *ipi;
	struct rproc *rproc;

	ipi = container_of(work, struct mbox_info, mbox_work);
	rproc = ipi->r5_core->rproc;

	/*
	 * We only use IPI for interrupt. The RPU firmware side may or may
	 * not write the notifyid when it trigger IPI.
	 * And thus, we scan through all the registered notifyids and
	 * find which one is valid to get the message.
	 * Even if message from firmware is NULL, we attempt to get vqid
	 */
	idr_for_each(&rproc->notifyids, event_notified_idr_cb, rproc);
}

/**
 * zynqmp_r5_mb_rx_cb() - receive channel mailbox callback
 * @cl: mailbox client
 * @msg: message pointer
 *
 * Receive data from ipi buffer, ack interrupt and then
 * it will schedule the R5 notification work.
 */
static void zynqmp_r5_mb_rx_cb(struct mbox_client *cl, void *msg)
{
	struct zynqmp_ipi_message *ipi_msg, *buf_msg;
	struct mbox_info *ipi;
	size_t len;

	ipi = container_of(cl, struct mbox_info, mbox_cl);

	/* copy data from ipi buffer to r5_core */
	ipi_msg = (struct zynqmp_ipi_message *)msg;
	buf_msg = (struct zynqmp_ipi_message *)ipi->rx_mc_buf;
	len = ipi_msg->len;
	if (len > IPI_BUF_LEN_MAX) {
		dev_warn(cl->dev, "msg size exceeded than %d\n",
			 IPI_BUF_LEN_MAX);
		len = IPI_BUF_LEN_MAX;
	}
	buf_msg->len = len;
	memcpy(buf_msg->data, ipi_msg->data, len);

	/* received and processed interrupt ack */
	if (mbox_send_message(ipi->rx_chan, NULL) < 0)
		dev_err(cl->dev, "ack failed to mbox rx_chan\n");

	schedule_work(&ipi->mbox_work);
}

/**
 * zynqmp_r5_setup_mbox() - Setup mailboxes related properties
 *			    this is used for each individual R5 core
 *
 * @cdev: child node device
 *
 * Function to setup mailboxes related properties
 * return : NULL if failed else pointer to mbox_info
 */
static struct mbox_info *zynqmp_r5_setup_mbox(struct device *cdev)
{
	struct mbox_client *mbox_cl;
	struct mbox_info *ipi;

	ipi = kzalloc(sizeof(*ipi), GFP_KERNEL);
	if (!ipi)
		return NULL;

	mbox_cl = &ipi->mbox_cl;
	mbox_cl->rx_callback = zynqmp_r5_mb_rx_cb;
	mbox_cl->tx_block = false;
	mbox_cl->knows_txdone = false;
	mbox_cl->tx_done = NULL;
	mbox_cl->dev = cdev;

	/* Request TX and RX channels */
	ipi->tx_chan = mbox_request_channel_byname(mbox_cl, "tx");
	if (IS_ERR(ipi->tx_chan)) {
		ipi->tx_chan = NULL;
		kfree(ipi);
		dev_warn(cdev, "mbox tx channel request failed\n");
		return NULL;
	}

	ipi->rx_chan = mbox_request_channel_byname(mbox_cl, "rx");
	if (IS_ERR(ipi->rx_chan)) {
		mbox_free_channel(ipi->tx_chan);
		ipi->rx_chan = NULL;
		ipi->tx_chan = NULL;
		kfree(ipi);
		dev_warn(cdev, "mbox rx channel request failed\n");
		return NULL;
	}

	INIT_WORK(&ipi->mbox_work, handle_event_notified);

	return ipi;
}

static void zynqmp_r5_free_mbox(struct mbox_info *ipi)
{
	if (!ipi)
		return;

	if (ipi->tx_chan) {
		mbox_free_channel(ipi->tx_chan);
		ipi->tx_chan = NULL;
	}

	if (ipi->rx_chan) {
		mbox_free_channel(ipi->rx_chan);
		ipi->rx_chan = NULL;
	}

	kfree(ipi);
}

/*
 * zynqmp_r5_core_kick() - kick a firmware if mbox is provided
 * @rproc: r5 core's corresponding rproc structure
 * @vqid: virtqueue ID
 */
static void zynqmp_r5_rproc_kick(struct rproc *rproc, int vqid)
{
	struct zynqmp_r5_core *r5_core = rproc->priv;
	struct device *dev = r5_core->dev;
	struct zynqmp_ipi_message *mb_msg;
	struct mbox_info *ipi;
	int ret;

	ipi = r5_core->ipi;
	if (!ipi)
		return;

	mb_msg = (struct zynqmp_ipi_message *)ipi->tx_mc_buf;
	memcpy(mb_msg->data, &vqid, sizeof(vqid));
	mb_msg->len = sizeof(vqid);
	ret = mbox_send_message(ipi->tx_chan, mb_msg);
	if (ret < 0)
		dev_warn(dev, "failed to send message\n");
}

/*
 * zynqmp_r5_rproc_start()
 * @rproc: single R5 core's corresponding rproc instance
 *
 * Start R5 Core from designated boot address.
 *
 * return 0 on success, otherwise non-zero value on failure
 */
static int zynqmp_r5_rproc_start(struct rproc *rproc)
{
	struct zynqmp_r5_core *r5_core = rproc->priv;
	enum rpu_boot_mem bootmem;
	int ret;

	/*
	 * The exception vector pointers (EVP) refer to the base-address of
	 * exception vectors (for reset, IRQ, FIQ, etc). The reset-vector
	 * starts at the base-address and subsequent vectors are on 4-byte
	 * boundaries.
	 *
	 * Exception vectors can start either from 0x0000_0000 (LOVEC) or
	 * from 0xFFFF_0000 (HIVEC) which is mapped in the OCM (On-Chip Memory)
	 *
	 * Usually firmware will put Exception vectors at LOVEC.
	 *
	 * It is not recommend that you change the exception vector.
	 * Changing the EVP to HIVEC will result in increased interrupt latency
	 * and jitter. Also, if the OCM is secured and the Cortex-R5F processor
	 * is non-secured, then the Cortex-R5F processor cannot access the
	 * HIVEC exception vectors in the OCM.
	 */
	bootmem = (rproc->bootaddr >= 0xFFFC0000) ?
		   PM_RPU_BOOTMEM_HIVEC : PM_RPU_BOOTMEM_LOVEC;

	dev_dbg(r5_core->dev, "RPU boot addr 0x%llx from %s.", rproc->bootaddr,
		bootmem == PM_RPU_BOOTMEM_HIVEC ? "OCM" : "TCM");

	ret = zynqmp_pm_request_wake(r5_core->pm_domain_id, 1,
				     bootmem, ZYNQMP_PM_REQUEST_ACK_NO);
	if (ret)
		dev_err(r5_core->dev,
			"failed to start RPU = 0x%x\n", r5_core->pm_domain_id);
	return ret;
}

/*
 * zynqmp_r5_rproc_stop()
 * @rproc: single R5 core's corresponding rproc instance
 *
 * Power down  R5 Core.
 *
 * return 0 on success, otherwise non-zero value on failure
 */
static int zynqmp_r5_rproc_stop(struct rproc *rproc)
{
	struct zynqmp_r5_core *r5_core = rproc->priv;
	int ret;

	ret = zynqmp_pm_force_pwrdwn(r5_core->pm_domain_id,
				     ZYNQMP_PM_REQUEST_ACK_BLOCKING);
	if (ret)
		dev_err(r5_core->dev, "failed to stop remoteproc RPU %d\n", ret);

	return ret;
}

/*
 * zynqmp_r5_mem_region_map()
 * @rproc: single R5 core's corresponding rproc instance
 * @mem: mem descriptor to map reserved memory-regions
 *
 * Callback to map va for memory-region's carveout.
 *
 * return 0 on success, otherwise non-zero value on failure
 */
static int zynqmp_r5_mem_region_map(struct rproc *rproc,
				    struct rproc_mem_entry *mem)
{
	void __iomem *va;

	va = ioremap_wc(mem->dma, mem->len);
	if (IS_ERR_OR_NULL(va))
		return -ENOMEM;

	mem->va = (void *)va;

	return 0;
}

/*
 * zynqmp_r5_rproc_mem_unmap
 * @rproc: single R5 core's corresponding rproc instance
 * @mem: mem entry to unmap
 *
 * Unmap memory-region carveout
 *
 * return: always returns 0
 */
static int zynqmp_r5_mem_region_unmap(struct rproc *rproc,
				      struct rproc_mem_entry *mem)
{
	iounmap((void __iomem *)mem->va);
	return 0;
}

/*
 * add_mem_regions_carveout()
 * @rproc: single R5 core's corresponding rproc instance
 *
 * Construct rproc mem carveouts from memory-region property nodes
 *
 * return 0 on success, otherwise non-zero value on failure
 */
static int add_mem_regions_carveout(struct rproc *rproc)
{
	struct rproc_mem_entry *rproc_mem;
	struct zynqmp_r5_core *r5_core;
	struct of_phandle_iterator it;
	struct reserved_mem *rmem;
	int i = 0;

	r5_core = rproc->priv;

	/* Register associated reserved memory regions */
	of_phandle_iterator_init(&it, r5_core->np, "memory-region", NULL, 0);

	while (of_phandle_iterator_next(&it) == 0) {
		rmem = of_reserved_mem_lookup(it.node);
		if (!rmem) {
			of_node_put(it.node);
			dev_err(&rproc->dev, "unable to acquire memory-region\n");
			return -EINVAL;
		}

		if (!strcmp(it.node->name, "vdev0buffer")) {
			/* Init reserved memory for vdev buffer */
			rproc_mem = rproc_of_resm_mem_entry_init(&rproc->dev, i,
								 rmem->size,
								 rmem->base,
								 it.node->name);
		} else {
			/* Register associated reserved memory regions */
			rproc_mem = rproc_mem_entry_init(&rproc->dev, NULL,
							 (dma_addr_t)rmem->base,
							 rmem->size, rmem->base,
							 zynqmp_r5_mem_region_map,
							 zynqmp_r5_mem_region_unmap,
							 it.node->name);
		}

		if (!rproc_mem) {
			of_node_put(it.node);
			return -ENOMEM;
		}

		rproc_add_carveout(rproc, rproc_mem);
		rproc_coredump_add_segment(rproc, rmem->base, rmem->size);

		dev_dbg(&rproc->dev, "reserved mem carveout %s addr=%llx, size=0x%llx",
			it.node->name, rmem->base, rmem->size);
		i++;
	}

	return 0;
}

static int add_sram_carveouts(struct rproc *rproc)
{
	struct zynqmp_r5_core *r5_core = rproc->priv;
	struct rproc_mem_entry *rproc_mem;
	struct zynqmp_sram_bank *sram;
	dma_addr_t dma_addr;
	size_t len;
	int da, i;

	for (i = 0; i < r5_core->num_sram; i++) {
		sram = &r5_core->sram[i];

		dma_addr = (dma_addr_t)sram->sram_res.start;

		len = resource_size(&sram->sram_res);
		da = sram->da;

		rproc_mem = rproc_mem_entry_init(&rproc->dev, NULL,
						 dma_addr,
						 len, da,
						 zynqmp_r5_mem_region_map,
						 zynqmp_r5_mem_region_unmap,
						 sram->sram_res.name);
		if (!rproc_mem) {
			dev_err(&rproc->dev, "failed to add sram %s da=0x%x, size=0x%lx",
				sram->sram_res.name, da, len);
			return -ENOMEM;
		}

		rproc_add_carveout(rproc, rproc_mem);
		rproc_coredump_add_segment(rproc, da, len);

		dev_dbg(&rproc->dev, "sram carveout %s addr=%llx, da=0x%x, size=0x%lx",
			sram->sram_res.name, dma_addr, da, len);
	}

	return 0;
}

/*
 * tcm_mem_unmap()
 * @rproc: single R5 core's corresponding rproc instance
 * @mem: tcm mem entry to unmap
 *
 * Unmap TCM banks when powering down R5 core.
 *
 * return always 0
 */
static int tcm_mem_unmap(struct rproc *rproc, struct rproc_mem_entry *mem)
{
	iounmap((void __iomem *)mem->va);

	return 0;
}

/*
 * tcm_mem_map()
 * @rproc: single R5 core's corresponding rproc instance
 * @mem: tcm memory entry descriptor
 *
 * Given TCM bank entry, this func setup virtual address for TCM bank
 * remoteproc carveout. It also takes care of va to da address translation
 *
 * return 0 on success, otherwise non-zero value on failure
 */
static int tcm_mem_map(struct rproc *rproc,
		       struct rproc_mem_entry *mem)
{
	void __iomem *va;

	va = ioremap_wc(mem->dma, mem->len);
	if (IS_ERR_OR_NULL(va))
		return -ENOMEM;

	/* Update memory entry va */
	mem->va = (void *)va;

	/* clear TCMs */
	memset_io(va, 0, mem->len);

	return 0;
}

/*
 * add_tcm_banks()
 * @rproc: single R5 core's corresponding rproc instance
 *
 * allocate and add remoteproc carveout for TCM memory
 *
 * return 0 on success, otherwise non-zero value on failure
 */
static int add_tcm_banks(struct rproc *rproc)
{
	struct rproc_mem_entry *rproc_mem;
	struct zynqmp_r5_core *r5_core;
	int i, num_banks, ret;
	phys_addr_t bank_addr;
	struct device *dev;
	u32 pm_domain_id;
	size_t bank_size;
	char *bank_name;
	u32 da;

	r5_core = rproc->priv;
	dev = r5_core->dev;
	num_banks = r5_core->tcm_bank_count;

	/*
	 * Power-on Each 64KB TCM,
	 * register its address space, map and unmap functions
	 * and add carveouts accordingly
	 */
	for (i = 0; i < num_banks; i++) {
		bank_addr = r5_core->tcm_banks[i]->addr;
		da = r5_core->tcm_banks[i]->da;
		bank_name = r5_core->tcm_banks[i]->bank_name;
		bank_size = r5_core->tcm_banks[i]->size;
		pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;

		ret = zynqmp_pm_request_node(pm_domain_id,
					     ZYNQMP_PM_CAPABILITY_ACCESS, 0,
					     ZYNQMP_PM_REQUEST_ACK_BLOCKING);
		if (ret < 0) {
			dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
			goto release_tcm;
		}

		dev_dbg(dev, "TCM carveout %s addr=%llx, da=0x%x, size=0x%lx",
			bank_name, bank_addr, da, bank_size);

		/*
		 * In DETACHED state firmware is already running so no need to
		 * request add TCM registers. However, request TCM PD node to let
		 * platform management firmware know that TCM is in use.
		 */
		if (rproc->state == RPROC_DETACHED)
			continue;

		rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
						 bank_size, da,
						 tcm_mem_map, tcm_mem_unmap,
						 bank_name);
		if (!rproc_mem) {
			ret = -ENOMEM;
			zynqmp_pm_release_node(pm_domain_id);
			goto release_tcm;
		}

		rproc_add_carveout(rproc, rproc_mem);
		rproc_coredump_add_segment(rproc, da, bank_size);
	}

	return 0;

release_tcm:
	/* If failed, Turn off all TCM banks turned on before */
	for (i--; i >= 0; i--) {
		pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
		zynqmp_pm_release_node(pm_domain_id);
	}
	return ret;
}

/*
 * zynqmp_r5_parse_fw()
 * @rproc: single R5 core's corresponding rproc instance
 * @fw: ptr to firmware to be loaded onto r5 core
 *
 * get resource table if available
 *
 * return 0 on success, otherwise non-zero value on failure
 */
static int zynqmp_r5_parse_fw(struct rproc *rproc, const struct firmware *fw)
{
	int ret;

	ret = rproc_elf_load_rsc_table(rproc, fw);
	if (ret == -EINVAL) {
		/*
		 * resource table only required for IPC.
		 * if not present, this is not necessarily an error;
		 * for example, loading r5 hello world application
		 * so simply inform user and keep going.
		 */
		dev_info(&rproc->dev, "no resource table found.\n");
		ret = 0;
	}
	return ret;
}

/**
 * zynqmp_r5_rproc_prepare()
 * adds carveouts for TCM bank and reserved memory regions
 *
 * @rproc: Device node of each rproc
 *
 * Return: 0 for success else < 0 error code
 */
static int zynqmp_r5_rproc_prepare(struct rproc *rproc)
{
	int ret;

	ret = add_tcm_banks(rproc);
	if (ret) {
		dev_err(&rproc->dev, "failed to get TCM banks, err %d\n", ret);
		return ret;
	}

	ret = add_mem_regions_carveout(rproc);
	if (ret) {
		dev_err(&rproc->dev, "failed to get reserve mem regions %d\n", ret);
		return ret;
	}

	ret = add_sram_carveouts(rproc);
	if (ret) {
		dev_err(&rproc->dev, "failed to get sram carveout %d\n", ret);
		return ret;
	}

	return 0;
}

/**
 * zynqmp_r5_rproc_unprepare()
 * Turns off TCM banks using power-domain id
 *
 * @rproc: Device node of each rproc
 *
 * Return: always 0
 */
static int zynqmp_r5_rproc_unprepare(struct rproc *rproc)
{
	struct zynqmp_r5_core *r5_core;
	u32 pm_domain_id;
	int i;

	r5_core = rproc->priv;

	for (i = 0; i < r5_core->tcm_bank_count; i++) {
		pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
		if (zynqmp_pm_release_node(pm_domain_id))
			dev_warn(r5_core->dev,
				 "can't turn off TCM bank 0x%x", pm_domain_id);
	}

	return 0;
}

static struct resource_table *zynqmp_r5_get_loaded_rsc_table(struct rproc *rproc,
							     size_t *size)
{
	struct zynqmp_r5_core *r5_core;

	r5_core = rproc->priv;

	*size = r5_core->rsc_tbl_size;

	return (struct resource_table *)r5_core->rsc_tbl_va;
}

static int zynqmp_r5_get_rsc_table_va(struct zynqmp_r5_core *r5_core)
{
	struct resource_table *rsc_tbl_addr;
	struct device *dev = r5_core->dev;
	struct rsc_tbl_data *rsc_data_va;
	struct resource res_mem;
	struct device_node *np;
	int ret;

	/*
	 * It is expected from remote processor firmware to provide resource
	 * table address via struct rsc_tbl_data data structure.
	 * Start address of first entry under "memory-region" property list
	 * contains that data structure which holds resource table address, size
	 * and some magic number to validate correct resource table entry.
	 */
	np = of_parse_phandle(r5_core->np, "memory-region", 0);
	if (!np) {
		dev_err(dev, "failed to get memory region dev node\n");
		return -EINVAL;
	}

	ret = of_address_to_resource(np, 0, &res_mem);
	of_node_put(np);
	if (ret) {
		dev_err(dev, "failed to get memory-region resource addr\n");
		return -EINVAL;
	}

	rsc_data_va = (struct rsc_tbl_data *)ioremap_wc(res_mem.start,
							sizeof(struct rsc_tbl_data));
	if (!rsc_data_va) {
		dev_err(dev, "failed to map resource table data address\n");
		return -EIO;
	}

	/*
	 * If RSC_TBL_XLNX_MAGIC number and its complement isn't found then
	 * do not consider resource table address valid and don't attach
	 */
	if (rsc_data_va->magic_num != RSC_TBL_XLNX_MAGIC ||
	    rsc_data_va->comp_magic_num != ~RSC_TBL_XLNX_MAGIC) {
		dev_dbg(dev, "invalid magic number, won't attach\n");
		return -EINVAL;
	}

	r5_core->rsc_tbl_va = ioremap_wc(rsc_data_va->rsc_tbl,
					 rsc_data_va->rsc_tbl_size);
	if (!r5_core->rsc_tbl_va) {
		dev_err(dev, "failed to get resource table va\n");
		return -EINVAL;
	}

	rsc_tbl_addr = (struct resource_table *)r5_core->rsc_tbl_va;

	/*
	 * As of now resource table version 1 is expected. Don't fail to attach
	 * but warn users about it.
	 */
	if (rsc_tbl_addr->ver != 1)
		dev_warn(dev, "unexpected resource table version %d\n",
			 rsc_tbl_addr->ver);

	r5_core->rsc_tbl_size = rsc_data_va->rsc_tbl_size;

	iounmap((void __iomem *)rsc_data_va);

	return 0;
}

static int zynqmp_r5_attach(struct rproc *rproc)
{
	dev_dbg(&rproc->dev, "rproc %d attached\n", rproc->index);

	return 0;
}

static int zynqmp_r5_detach(struct rproc *rproc)
{
	/*
	 * Generate last notification to remote after clearing virtio flag.
	 * Remote can avoid polling on virtio reset flag if kick is generated
	 * during detach by host and check virtio reset flag on kick interrupt.
	 */
	zynqmp_r5_rproc_kick(rproc, 0);

	return 0;
}

static const struct rproc_ops zynqmp_r5_rproc_ops = {
	.prepare	= zynqmp_r5_rproc_prepare,
	.unprepare	= zynqmp_r5_rproc_unprepare,
	.start		= zynqmp_r5_rproc_start,
	.stop		= zynqmp_r5_rproc_stop,
	.load		= rproc_elf_load_segments,
	.parse_fw	= zynqmp_r5_parse_fw,
	.find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
	.sanity_check	= rproc_elf_sanity_check,
	.get_boot_addr	= rproc_elf_get_boot_addr,
	.kick		= zynqmp_r5_rproc_kick,
	.get_loaded_rsc_table = zynqmp_r5_get_loaded_rsc_table,
	.attach		= zynqmp_r5_attach,
	.detach		= zynqmp_r5_detach,
};

/**
 * zynqmp_r5_add_rproc_core()
 * Allocate and add struct rproc object for each r5f core
 * This is called for each individual r5f core
 *
 * @cdev: Device node of each r5 core
 *
 * Return: zynqmp_r5_core object for success else error code pointer
 */
static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
{
	struct zynqmp_r5_core *r5_core;
	struct rproc *r5_rproc;
	int ret;

	/* Set up DMA mask */
	ret = dma_set_coherent_mask(cdev, DMA_BIT_MASK(32));
	if (ret)
		return ERR_PTR(ret);

	/* Allocate remoteproc instance */
	r5_rproc = rproc_alloc(cdev, dev_name(cdev),
			       &zynqmp_r5_rproc_ops,
			       NULL, sizeof(struct zynqmp_r5_core));
	if (!r5_rproc) {
		dev_err(cdev, "failed to allocate memory for rproc instance\n");
		return ERR_PTR(-ENOMEM);
	}

	rproc_coredump_set_elf_info(r5_rproc, ELFCLASS32, EM_ARM);

	r5_rproc->auto_boot = false;
	r5_core = r5_rproc->priv;
	r5_core->dev = cdev;
	r5_core->np = dev_of_node(cdev);
	if (!r5_core->np) {
		dev_err(cdev, "can't get device node for r5 core\n");
		ret = -EINVAL;
		goto free_rproc;
	}

	/* Add R5 remoteproc core */
	ret = rproc_add(r5_rproc);
	if (ret) {
		dev_err(cdev, "failed to add r5 remoteproc\n");
		goto free_rproc;
	}

	/*
	 * If firmware is already available in the memory then move rproc state
	 * to DETACHED. Firmware can be preloaded via debugger or by any other
	 * agent (processors) in the system.
	 * If firmware isn't available in the memory and resource table isn't
	 * found, then rproc state remains OFFLINE.
	 */
	if (!zynqmp_r5_get_rsc_table_va(r5_core))
		r5_rproc->state = RPROC_DETACHED;

	r5_core->rproc = r5_rproc;
	return r5_core;

free_rproc:
	rproc_free(r5_rproc);
	return ERR_PTR(ret);
}

static int zynqmp_r5_get_sram_banks(struct zynqmp_r5_core *r5_core)
{
	struct device_node *np = r5_core->np;
	struct device *dev = r5_core->dev;
	struct zynqmp_sram_bank *sram;
	struct device_node *sram_np;
	int num_sram, i, ret;
	u64 abs_addr, size;

	/* "sram" is optional property. Do not fail, if unavailable. */
	if (!of_property_present(r5_core->np, "sram"))
		return 0;

	num_sram = of_property_count_elems_of_size(np, "sram", sizeof(phandle));
	if (num_sram <= 0) {
		dev_err(dev, "Invalid sram property, ret = %d\n",
			num_sram);
		return -EINVAL;
	}

	sram = devm_kcalloc(dev, num_sram,
			    sizeof(struct zynqmp_sram_bank), GFP_KERNEL);
	if (!sram)
		return -ENOMEM;

	for (i = 0; i < num_sram; i++) {
		sram_np = of_parse_phandle(np, "sram", i);
		if (!sram_np) {
			dev_err(dev, "failed to get sram %d phandle\n", i);
			return -EINVAL;
		}

		if (!of_device_is_available(sram_np)) {
			dev_err(dev, "sram device not available\n");
			ret = -EINVAL;
			goto fail_sram_get;
		}

		ret = of_address_to_resource(sram_np, 0, &sram[i].sram_res);
		if (ret) {
			dev_err(dev, "addr to res failed\n");
			goto fail_sram_get;
		}

		/* Get SRAM device address */
		ret = of_property_read_reg(sram_np, i, &abs_addr, &size);
		if (ret) {
			dev_err(dev, "failed to get reg property\n");
			goto fail_sram_get;
		}

		sram[i].da = (u32)abs_addr;

		of_node_put(sram_np);

		dev_dbg(dev, "sram %d: name=%s, addr=0x%llx, da=0x%x, size=0x%llx\n",
			i, sram[i].sram_res.name, sram[i].sram_res.start,
			sram[i].da, resource_size(&sram[i].sram_res));
	}

	r5_core->sram = sram;
	r5_core->num_sram = num_sram;

	return 0;

fail_sram_get:
	of_node_put(sram_np);

	return ret;
}

static int zynqmp_r5_get_tcm_node_from_dt(struct zynqmp_r5_cluster *cluster)
{
	int i, j, tcm_bank_count, ret, tcm_pd_idx, pd_count;
	struct of_phandle_args out_args;
	struct zynqmp_r5_core *r5_core;
	struct platform_device *cpdev;
	struct mem_bank_data *tcm;
	struct device_node *np;
	struct resource *res;
	u64 abs_addr, size;
	struct device *dev;

	for (i = 0; i < cluster->core_count; i++) {
		r5_core = cluster->r5_cores[i];
		dev = r5_core->dev;
		np = r5_core->np;

		pd_count = of_count_phandle_with_args(np, "power-domains",
						      "#power-domain-cells");

		if (pd_count <= 0) {
			dev_err(dev, "invalid power-domains property, %d\n", pd_count);
			return -EINVAL;
		}

		/* First entry in power-domains list is for r5 core, rest for TCM. */
		tcm_bank_count = pd_count - 1;

		if (tcm_bank_count <= 0) {
			dev_err(dev, "invalid TCM count %d\n", tcm_bank_count);
			return -EINVAL;
		}

		r5_core->tcm_banks = devm_kcalloc(dev, tcm_bank_count,
						  sizeof(struct mem_bank_data *),
						  GFP_KERNEL);
		if (!r5_core->tcm_banks)
			return -ENOMEM;

		r5_core->tcm_bank_count = tcm_bank_count;
		for (j = 0, tcm_pd_idx = 1; j < tcm_bank_count; j++, tcm_pd_idx++) {
			tcm = devm_kzalloc(dev, sizeof(struct mem_bank_data),
					   GFP_KERNEL);
			if (!tcm)
				return -ENOMEM;

			r5_core->tcm_banks[j] = tcm;

			/* Get power-domains id of TCM. */
			ret = of_parse_phandle_with_args(np, "power-domains",
							 "#power-domain-cells",
							 tcm_pd_idx, &out_args);
			if (ret) {
				dev_err(r5_core->dev,
					"failed to get tcm %d pm domain, ret %d\n",
					tcm_pd_idx, ret);
				return ret;
			}
			tcm->pm_domain_id = out_args.args[0];
			of_node_put(out_args.np);

			/* Get TCM address without translation. */
			ret = of_property_read_reg(np, j, &abs_addr, &size);
			if (ret) {
				dev_err(dev, "failed to get reg property\n");
				return ret;
			}

			/*
			 * Remote processor can address only 32 bits
			 * so convert 64-bits into 32-bits. This will discard
			 * any unwanted upper 32-bits.
			 */
			tcm->da = (u32)abs_addr;
			tcm->size = (u32)size;

			cpdev = to_platform_device(dev);
			res = platform_get_resource(cpdev, IORESOURCE_MEM, j);
			if (!res) {
				dev_err(dev, "failed to get tcm resource\n");
				return -EINVAL;
			}

			tcm->addr = (u32)res->start;
			tcm->bank_name = (char *)res->name;
			res = devm_request_mem_region(dev, tcm->addr, tcm->size,
						      tcm->bank_name);
			if (!res) {
				dev_err(dev, "failed to request tcm resource\n");
				return -EINVAL;
			}
		}
	}

	return 0;
}

/**
 * zynqmp_r5_get_tcm_node()
 * Ideally this function should parse tcm node and store information
 * in r5_core instance. For now, Hardcoded TCM information is used.
 * This approach is used as TCM bindings for system-dt is being developed
 *
 * @cluster: pointer to zynqmp_r5_cluster type object
 *
 * Return: 0 for success and < 0 error code for failure.
 */
static int zynqmp_r5_get_tcm_node(struct zynqmp_r5_cluster *cluster)
{
	const struct mem_bank_data *zynqmp_tcm_banks;
	struct device *dev = cluster->dev;
	struct zynqmp_r5_core *r5_core;
	int tcm_bank_count, tcm_node;
	int i, j;

	if (cluster->mode == SPLIT_MODE) {
		zynqmp_tcm_banks = zynqmp_tcm_banks_split;
		tcm_bank_count = ARRAY_SIZE(zynqmp_tcm_banks_split);
	} else {
		zynqmp_tcm_banks = zynqmp_tcm_banks_lockstep;
		tcm_bank_count = ARRAY_SIZE(zynqmp_tcm_banks_lockstep);
	}

	/* count per core tcm banks */
	tcm_bank_count = tcm_bank_count / cluster->core_count;

	/*
	 * r5 core 0 will use all of TCM banks in lockstep mode.
	 * In split mode, r5 core0 will use 128k and r5 core1 will use another
	 * 128k. Assign TCM banks to each core accordingly
	 */
	tcm_node = 0;
	for (i = 0; i < cluster->core_count; i++) {
		r5_core = cluster->r5_cores[i];
		r5_core->tcm_banks = devm_kcalloc(dev, tcm_bank_count,
						  sizeof(struct mem_bank_data *),
						  GFP_KERNEL);
		if (!r5_core->tcm_banks)
			return -ENOMEM;

		for (j = 0; j < tcm_bank_count; j++) {
			/*
			 * Use pre-defined TCM reg values.
			 * Eventually this should be replaced by values
			 * parsed from dts.
			 */
			r5_core->tcm_banks[j] =
				(struct mem_bank_data *)&zynqmp_tcm_banks[tcm_node];
			tcm_node++;
		}

		r5_core->tcm_bank_count = tcm_bank_count;
	}

	return 0;
}

/*
 * zynqmp_r5_core_init()
 * Create and initialize zynqmp_r5_core type object
 *
 * @cluster: pointer to zynqmp_r5_cluster type object
 * @fw_reg_val: value expected by firmware to configure RPU cluster mode
 * @tcm_mode: value expected by fw to configure TCM mode (lockstep or split)
 *
 * Return: 0 for success and error code for failure.
 */
static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
			       enum rpu_oper_mode fw_reg_val,
			       enum rpu_tcm_comb tcm_mode)
{
	struct device *dev = cluster->dev;
	struct zynqmp_r5_core *r5_core;
	int ret = -EINVAL, i;

	r5_core = cluster->r5_cores[0];

	/* Maintain backward compatibility for zynqmp by using hardcode TCM address. */
	if (of_property_present(r5_core->np, "reg"))
		ret = zynqmp_r5_get_tcm_node_from_dt(cluster);
	else if (device_is_compatible(dev, "xlnx,zynqmp-r5fss"))
		ret = zynqmp_r5_get_tcm_node(cluster);

	if (ret) {
		dev_err(dev, "can't get tcm, err %d\n", ret);
		return ret;
	}

	for (i = 0; i < cluster->core_count; i++) {
		r5_core = cluster->r5_cores[i];

		/* Initialize r5 cores with power-domains parsed from dts */
		ret = of_property_read_u32_index(r5_core->np, "power-domains",
						 1, &r5_core->pm_domain_id);
		if (ret) {
			dev_err(dev, "failed to get power-domains property\n");
			return ret;
		}

		ret = zynqmp_pm_set_rpu_mode(r5_core->pm_domain_id, fw_reg_val);
		if (ret < 0) {
			dev_err(r5_core->dev, "failed to set RPU mode\n");
			return ret;
		}

		if (of_property_present(dev_of_node(dev), "xlnx,tcm-mode") ||
		    device_is_compatible(dev, "xlnx,zynqmp-r5fss")) {
			ret = zynqmp_pm_set_tcm_config(r5_core->pm_domain_id,
						       tcm_mode);
			if (ret < 0) {
				dev_err(r5_core->dev, "failed to configure TCM\n");
				return ret;
			}
		}

		ret = zynqmp_r5_get_sram_banks(r5_core);
		if (ret)
			return ret;
	}

	return 0;
}

/*
 * zynqmp_r5_cluster_init()
 * Create and initialize zynqmp_r5_cluster type object
 *
 * @cluster: pointer to zynqmp_r5_cluster type object
 *
 * Return: 0 for success and error code for failure.
 */
static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster)
{
	enum zynqmp_r5_cluster_mode cluster_mode = LOCKSTEP_MODE;
	struct device *dev = cluster->dev;
	struct device_node *dev_node = dev_of_node(dev);
	struct platform_device *child_pdev;
	struct zynqmp_r5_core **r5_cores;
	enum rpu_oper_mode fw_reg_val;
	struct device **child_devs;
	struct device_node *child;
	enum rpu_tcm_comb tcm_mode;
	int core_count, ret, i;
	struct mbox_info *ipi;

	ret = of_property_read_u32(dev_node, "xlnx,cluster-mode", &cluster_mode);

	/*
	 * on success returns 0, if not defined then returns -EINVAL,
	 * In that case, default is LOCKSTEP mode. Other than that
	 * returns relative error code < 0.
	 */
	if (ret != -EINVAL && ret != 0) {
		dev_err(dev, "Invalid xlnx,cluster-mode property\n");
		return ret;
	}

	/*
	 * For now driver only supports split mode and lockstep mode.
	 * fail driver probe if either of that is not set in dts.
	 */
	if (cluster_mode == LOCKSTEP_MODE) {
		fw_reg_val = PM_RPU_MODE_LOCKSTEP;
	} else if (cluster_mode == SPLIT_MODE) {
		fw_reg_val = PM_RPU_MODE_SPLIT;
	} else {
		dev_err(dev, "driver does not support cluster mode %d\n", cluster_mode);
		return -EINVAL;
	}

	if (of_property_present(dev_node, "xlnx,tcm-mode")) {
		ret = of_property_read_u32(dev_node, "xlnx,tcm-mode", (u32 *)&tcm_mode);
		if (ret)
			return ret;
	} else if (device_is_compatible(dev, "xlnx,zynqmp-r5fss")) {
		if (cluster_mode == LOCKSTEP_MODE)
			tcm_mode = PM_RPU_TCM_COMB;
		else
			tcm_mode = PM_RPU_TCM_SPLIT;
	} else {
		tcm_mode = PM_RPU_TCM_COMB;
	}

	/*
	 * Number of cores is decided by number of child nodes of
	 * r5f subsystem node in dts. If Split mode is used in dts
	 * 2 child nodes are expected.
	 * In lockstep mode if two child nodes are available,
	 * only use first child node and consider it as core0
	 * and ignore core1 dt node.
	 */
	core_count = of_get_available_child_count(dev_node);
	if (core_count == 0) {
		dev_err(dev, "Invalid number of r5 cores %d", core_count);
		return -EINVAL;
	} else if (cluster_mode == SPLIT_MODE && core_count != 2) {
		dev_err(dev, "Invalid number of r5 cores for split mode\n");
		return -EINVAL;
	} else if (cluster_mode == LOCKSTEP_MODE && core_count == 2) {
		dev_warn(dev, "Only r5 core0 will be used\n");
		core_count = 1;
	}

	child_devs = kcalloc(core_count, sizeof(struct device *), GFP_KERNEL);
	if (!child_devs)
		return -ENOMEM;

	r5_cores = kcalloc(core_count,
			   sizeof(struct zynqmp_r5_core *), GFP_KERNEL);
	if (!r5_cores) {
		kfree(child_devs);
		return -ENOMEM;
	}

	i = 0;
	for_each_available_child_of_node(dev_node, child) {
		child_pdev = of_find_device_by_node(child);
		if (!child_pdev) {
			of_node_put(child);
			ret = -ENODEV;
			goto release_r5_cores;
		}

		child_devs[i] = &child_pdev->dev;

		/* create and add remoteproc instance of type struct rproc */
		r5_cores[i] = zynqmp_r5_add_rproc_core(&child_pdev->dev);
		if (IS_ERR(r5_cores[i])) {
			of_node_put(child);
			ret = PTR_ERR(r5_cores[i]);
			r5_cores[i] = NULL;
			goto release_r5_cores;
		}

		/*
		 * If mailbox nodes are disabled using "status" property then
		 * setting up mailbox channels will fail.
		 */
		ipi = zynqmp_r5_setup_mbox(&child_pdev->dev);
		if (ipi) {
			r5_cores[i]->ipi = ipi;
			ipi->r5_core = r5_cores[i];
		}

		/*
		 * If two child nodes are available in dts in lockstep mode,
		 * then ignore second child node.
		 */
		if (cluster_mode == LOCKSTEP_MODE) {
			of_node_put(child);
			break;
		}

		i++;
	}

	cluster->mode = cluster_mode;
	cluster->core_count = core_count;
	cluster->r5_cores = r5_cores;

	ret = zynqmp_r5_core_init(cluster, fw_reg_val, tcm_mode);
	if (ret < 0) {
		dev_err(dev, "failed to init r5 core err %d\n", ret);
		cluster->core_count = 0;
		cluster->r5_cores = NULL;

		/*
		 * at this point rproc resources for each core are allocated.
		 * adjust index to free resources in reverse order
		 */
		i = core_count - 1;
		goto release_r5_cores;
	}

	kfree(child_devs);
	return 0;

release_r5_cores:
	while (i >= 0) {
		put_device(child_devs[i]);
		if (r5_cores[i]) {
			zynqmp_r5_free_mbox(r5_cores[i]->ipi);
			of_reserved_mem_device_release(r5_cores[i]->dev);
			rproc_del(r5_cores[i]->rproc);
			rproc_free(r5_cores[i]->rproc);
		}
		i--;
	}
	kfree(r5_cores);
	kfree(child_devs);
	return ret;
}

static void zynqmp_r5_cluster_exit(void *data)
{
	struct platform_device *pdev = data;
	struct zynqmp_r5_cluster *cluster;
	struct zynqmp_r5_core *r5_core;
	int i;

	cluster = platform_get_drvdata(pdev);
	if (!cluster)
		return;

	for (i = 0; i < cluster->core_count; i++) {
		r5_core = cluster->r5_cores[i];
		zynqmp_r5_free_mbox(r5_core->ipi);
		iounmap(r5_core->rsc_tbl_va);
		of_reserved_mem_device_release(r5_core->dev);
		put_device(r5_core->dev);
		rproc_del(r5_core->rproc);
		rproc_free(r5_core->rproc);
	}

	kfree(cluster->r5_cores);
	kfree(cluster);
	platform_set_drvdata(pdev, NULL);
}

/*
 * zynqmp_r5_remoteproc_probe()
 * parse device-tree, initialize hardware and allocate required resources
 * and remoteproc ops
 *
 * @pdev: domain platform device for R5 cluster
 *
 * Return: 0 for success and < 0 for failure.
 */
static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev)
{
	struct zynqmp_r5_cluster *cluster;
	struct device *dev = &pdev->dev;
	int ret;

	cluster = kzalloc(sizeof(*cluster), GFP_KERNEL);
	if (!cluster)
		return -ENOMEM;

	cluster->dev = dev;

	ret = devm_of_platform_populate(dev);
	if (ret) {
		dev_err_probe(dev, ret, "failed to populate platform dev\n");
		kfree(cluster);
		return ret;
	}

	/* wire in so each core can be cleaned up at driver remove */
	platform_set_drvdata(pdev, cluster);

	ret = zynqmp_r5_cluster_init(cluster);
	if (ret) {
		kfree(cluster);
		platform_set_drvdata(pdev, NULL);
		dev_err_probe(dev, ret, "Invalid r5f subsystem device tree\n");
		return ret;
	}

	ret = devm_add_action_or_reset(dev, zynqmp_r5_cluster_exit, pdev);
	if (ret)
		return ret;

	return 0;
}

/* Match table for OF platform binding */
static const struct of_device_id zynqmp_r5_remoteproc_match[] = {
	{ .compatible = "xlnx,versal-net-r52fss", },
	{ .compatible = "xlnx,versal-r5fss", },
	{ .compatible = "xlnx,zynqmp-r5fss", },
	{ /* end of list */ },
};
MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);

static struct platform_driver zynqmp_r5_remoteproc_driver = {
	.probe = zynqmp_r5_remoteproc_probe,
	.driver = {
		.name = "zynqmp_r5_remoteproc",
		.of_match_table = zynqmp_r5_remoteproc_match,
	},
};
module_platform_driver(zynqmp_r5_remoteproc_driver);

MODULE_DESCRIPTION("Xilinx R5F remote processor driver");
MODULE_AUTHOR("Xilinx Inc.");
MODULE_LICENSE("GPL");