linux/arch/arm/mach-imx
Fabio Estevam a49fb63c87 ARM: mx6: Only check for 1.2GHz for mx6quad
It is only the mx6quad variant that can run up to 1.2GHz, so add the check
accordingly.

This avoids getting the following warning on a mx6solo:

failed to disable 1.2 GHz OPP

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:11:33 +08:00
..
devices ARM: imx5: remove i.MX5 non-DT device registration helpers 2014-07-18 16:10:05 +08:00
3ds_debugboard.c
3ds_debugboard.h
anatop.c ARM: imx: use imx_init_revision_from_anatop() on imx6sl 2013-10-21 09:13:13 +08:00
avic.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
board-mx31lilly.h
board-mx31lite.h
board-mx31moboard.h
board-pcm038.h
clk-busy.c ARM: arm-soc non-critical fixes for 3.10 2013-05-02 08:56:55 -07:00
clk-fixup-div.c ARM: imx: add common clock support for fixup div 2013-08-16 13:11:24 +08:00
clk-fixup-mux.c ARM: imx: initialize clk_init_data.flags for clk-fixup-mux 2013-09-17 10:04:23 +08:00
clk-gate2.c ARM: imx: add shared gate clock support 2014-05-12 22:58:48 +08:00
clk-imx1.c ARM: i.MX clk: Move clock check function in common location 2014-07-18 16:10:12 +08:00
clk-imx6q.c ARM: imx6qdl: switch to use macro for clock ID 2014-07-18 16:11:23 +08:00
clk-imx6sl.c ARM: i.MX clk: Move clock check function in common location 2014-07-18 16:10:12 +08:00
clk-imx6sx.c ARM: i.MX clk: Move clock check function in common location 2014-07-18 16:10:12 +08:00
clk-imx21.c ARM: i.MX21 clk: Add devicetree support 2014-07-18 16:11:32 +08:00
clk-imx25.c ARM: i.MX25 clk: Use of_clk_init() for DT case 2014-07-18 16:11:32 +08:00
clk-imx27.c ARM: i.MX clk: Move clock check function in common location 2014-07-18 16:10:12 +08:00
clk-imx31.c ARM: i.MX clk: Move clock check function in common location 2014-07-18 16:10:12 +08:00
clk-imx35.c ARM: i.MX clk: Move clock check function in common location 2014-07-18 16:10:12 +08:00
clk-imx51-imx53.c ARM: clk-imx51-imx53: Remove clk_register_clkdev() 2014-07-18 16:11:31 +08:00
clk-pfd.c ARM: imx: add necessary interface for pfd 2013-12-31 09:36:45 +08:00
clk-pllv1.c ARM: imx: pllv1: Fix PLL calculation for i.MX27 2013-12-31 09:36:29 +08:00
clk-pllv2.c ARM: mach-imx: clk-pllv2: Staticize clk_pllv2_ops 2013-04-01 16:17:50 +08:00
clk-pllv3.c ARM: imx: set up pllv3 POWER and BYPASS sequentially 2013-11-11 22:58:45 +08:00
clk-vf610.c ARM: i.MX clk: Move clock check function in common location 2014-07-18 16:10:12 +08:00
clk.c ARM: i.MX clk: Move clock check function in common location 2014-07-18 16:10:12 +08:00
clk.h ARM: i.MX21 clk: Clock initialization rework 2014-07-18 16:11:31 +08:00
common.h ARM: i.MX25 clk: Use of_clk_init() for DT case 2014-07-18 16:11:32 +08:00
cpu-imx5.c ARM: imx5: retrieve iim base from device tree 2014-07-18 16:10:07 +08:00
cpu-imx25.c
cpu-imx27.c
cpu-imx31.c
cpu-imx35.c
cpu.c ARM: imx: add basic imx6sx SoC support 2014-05-16 15:35:25 +08:00
cpuidle-imx5.c ARM: imx: cpuidle: use init/exit common routine 2013-04-23 13:45:23 +02:00
cpuidle-imx6q.c ARM: imx: mem bit must be cleared before entering DSM mode 2014-07-18 16:11:30 +08:00
cpuidle-imx6sl.c ARM: imx: add cpuidle support for i.mx6sl 2014-03-05 10:35:01 +08:00
cpuidle.h ARM: imx: add cpuidle support for i.mx6sl 2014-03-05 10:35:01 +08:00
crmregs-imx3.h
devices-imx1.h
devices-imx21.h
devices-imx25.h ARM i.MX: remove PWM platform support 2014-03-05 10:35:09 +08:00
devices-imx27.h
devices-imx31.h
devices-imx35.h ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
ehci-imx25.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx27.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx31.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci-imx35.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
ehci.h ARM: imx5: remove imx51 non-DT support files 2014-07-18 16:10:05 +08:00
epit.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
eukrea_mbimx27-baseboard.c ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro 2013-04-03 16:50:54 +08:00
eukrea_mbimxsd25-baseboard.c ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
eukrea_mbimxsd35-baseboard.c ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
eukrea-baseboards.h
gpc.c ARM: imx: add standby mode support for suspend 2014-07-18 16:11:30 +08:00
hardware.h ARM: imx5: remove mx51.h and mx53.h 2014-07-18 16:10:10 +08:00
headsmp.S ARM: imx6: drop .text.head section annotation from headsmp.S 2014-03-05 10:48:26 +08:00
hotplug.c ARM: imx: do not return from imx_cpu_die() call 2013-10-21 09:37:31 +08:00
iim.h
imx25-dt.c ARM: i.MX25 clk: Use of_clk_init() for DT case 2014-07-18 16:11:32 +08:00
imx27-dt.c ARM: i.MX27 clk: Use of_clk_init() for DT case 2014-07-18 16:10:12 +08:00
imx31-dt.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
imx35-dt.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
iomux-imx31.c ARM: mach-imx: iomux-imx31: Staticize mxc_pin_alloc_map 2013-04-01 16:17:48 +08:00
iomux-mx1.h
iomux-mx2x.h
iomux-mx3.h
iomux-mx21.h
iomux-mx25.h
iomux-mx27.h
iomux-mx35.h
iomux-v1.c
iomux-v1.h
iomux-v3.c
iomux-v3.h
irq-common.c ARM: imx: irq-common: Include header to avoid sparse warning 2013-06-17 15:45:14 +08:00
irq-common.h ARM: imx: drop support for irq priorisation 2013-12-09 13:18:25 +08:00
Kconfig ARM: i.MX: Remove Freescale i.MX27 IP Camera board support 2014-07-18 16:10:14 +08:00
mach-apf9328.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-armadillo5x0.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-bug.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-cpuimx27.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-cpuimx35.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-eukrea_cpuimx25.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-imx6q.c ARM: mx6: Only check for 1.2GHz for mx6quad 2014-07-18 16:11:33 +08:00
mach-imx6sl.c ARM: imx: add suspend in ocram support for i.mx6q 2014-03-05 10:35:10 +08:00
mach-imx6sx.c ARM: imx: add cpuidle support for i.mx6sx 2014-07-18 16:10:14 +08:00
mach-imx27_visstrim_m10.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-imx27lite.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-imx50.c ARM: imx5: remove file mm-imx5.c 2014-07-18 16:10:09 +08:00
mach-imx51.c ARM: imx5: remove mx51.h and mx53.h 2014-07-18 16:10:10 +08:00
mach-imx53.c ARM: imx5: remove mx51.h and mx53.h 2014-07-18 16:10:10 +08:00
mach-kzm_arm11_01.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-mx1ads.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-mx21ads.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-mx25_3ds.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx27_3ds.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx27ads.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-mx31_3ds.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx31ads.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-mx31lilly.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx31lite.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx31moboard.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mx35_3ds.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-mxt_td60.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-pca100.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-pcm037_eet.c
mach-pcm037.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-pcm038.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-pcm043.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mach-qong.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-scb9328.c ARM: i.MX: Setup IRQ handler from IRQ driver 2014-05-12 22:58:51 +08:00
mach-vf610.c ARM: l2c: imx vf610: convert to generic l2c OF initialisation 2014-05-30 00:49:28 +01:00
mach-vpr200.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
Makefile ARM: i.MX: Remove Freescale i.MX27 IP Camera board support 2014-07-18 16:10:14 +08:00
mm-imx1.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx3.c Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm 2013-07-03 09:46:29 -07:00
mm-imx21.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx25.c ARM: i.MX: remove sdma script address arrays from platform data 2013-08-26 20:47:16 +05:30
mm-imx27.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mmdc.c
mx1-camera-fiq-ksym.c
mx1-camera-fiq.S
mx1.h
mx2x.h
mx3x.h
mx21.h
mx25.h
mx27.h ARM: i.MX27: Typo fix 2013-07-15 08:28:07 +08:00
mx31.h
mx31lilly-db.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
mx31lite-db.c
mx31moboard-devboard.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mx31moboard-marxbot.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mx31moboard-smartbot.c ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
mx35.h
mxc.h ARM: imx: add basic imx6sx SoC support 2014-05-16 15:35:25 +08:00
pcm037.h
pcm970-baseboard.c
platsmp.c ARM: clean up cache handling in platform code 2013-12-11 16:24:34 -08:00
pm-imx3.c
pm-imx5.c ARM: imx5: use dynamic mapping for Cortex and GPC block 2014-07-18 16:10:09 +08:00
pm-imx6.c ARM: imx: add standby mode support for suspend 2014-07-18 16:11:30 +08:00
pm-imx27.c
src.c ARM: imx: remove imx_src_prepare_restart() call 2013-11-11 22:58:43 +08:00
ssi-fiq-ksym.c
ssi-fiq.S
suspend-imx6.S ARM: l2c: imx: convert to common l2c310 early resume functionality 2014-05-30 00:49:24 +01:00
system.c ARM: i.MX system: Add a reset fallback if base address of watchdog is not set 2014-07-18 16:10:13 +08:00
time.c ARM: i.MX: Remove excess variable 2014-07-18 16:10:11 +08:00
tzic.c ARM: imx5: tzic_init_irq() can directly be .init_irq hook 2014-07-18 16:10:06 +08:00
ulpi.h ARM: imx: Remove mxc specific ulpi access ops 2013-06-17 15:45:16 +08:00