mirror of
https://github.com/torvalds/linux.git
synced 2024-12-13 22:53:20 +00:00
752451f01c
Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...
94 lines
3.5 KiB
Makefile
94 lines
3.5 KiB
Makefile
#
|
|
# Makefile for the i2c bus drivers.
|
|
#
|
|
|
|
# ACPI drivers
|
|
obj-$(CONFIG_I2C_SCMI) += i2c-scmi.o
|
|
|
|
# PC SMBus host controller drivers
|
|
obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o
|
|
obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o
|
|
obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o
|
|
obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
|
|
obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o
|
|
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
|
|
obj-$(CONFIG_I2C_I801) += i2c-i801.o
|
|
obj-$(CONFIG_I2C_ISCH) += i2c-isch.o
|
|
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
|
|
obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o
|
|
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
|
|
obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
|
|
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
|
|
obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
|
|
obj-$(CONFIG_I2C_VIA) += i2c-via.o
|
|
obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
|
|
|
|
# Mac SMBus host controller drivers
|
|
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
|
|
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
|
|
|
|
# Embedded system I2C/SMBus host controller drivers
|
|
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
|
|
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
|
|
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
|
|
obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
|
|
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
|
|
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
|
|
obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o
|
|
obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
|
|
i2c-designware-platform-objs := i2c-designware-platdrv.o
|
|
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
|
|
i2c-designware-pci-objs := i2c-designware-pcidrv.o
|
|
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
|
|
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
|
|
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
|
|
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
|
|
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
|
|
obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o
|
|
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
|
|
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
|
|
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
|
|
obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
|
|
obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o
|
|
obj-$(CONFIG_I2C_NUC900) += i2c-nuc900.o
|
|
obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
|
|
obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
|
|
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
|
|
obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
|
|
obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
|
|
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
|
|
obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
|
|
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
|
|
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
|
|
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
|
|
obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
|
|
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
|
|
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
|
|
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
|
|
obj-$(CONFIG_I2C_SIRF) += i2c-sirf.o
|
|
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
|
|
obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o
|
|
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
|
|
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
|
|
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
|
|
obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
|
|
obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o
|
|
|
|
# External I2C/SMBus adapter drivers
|
|
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
|
|
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
|
|
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
|
|
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
|
|
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
|
|
obj-$(CONFIG_I2C_VIPERBOARD) += i2c-viperboard.o
|
|
|
|
# Other I2C/SMBus bus drivers
|
|
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
|
|
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
|
|
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
|
|
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
|
|
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
|
|
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
|
|
|
|
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
|