mirror of
https://github.com/torvalds/linux.git
synced 2024-12-28 13:51:44 +00:00
d28ffb42f4
Add compatible string for QMP UFS phy on msm8998. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
215 lines
6.6 KiB
Plaintext
215 lines
6.6 KiB
Plaintext
Qualcomm QMP PHY controller
|
|
===========================
|
|
|
|
QMP phy controller supports physical layer functionality for a number of
|
|
controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
|
|
|
|
Required properties:
|
|
- compatible: compatible list, contains:
|
|
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
|
|
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
|
|
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
|
|
"qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
|
|
"qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
|
|
"qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
|
|
"qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
|
|
"qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
|
|
|
|
- reg:
|
|
- index 0: address and length of register set for PHY's common
|
|
serdes block.
|
|
- index 1: address and length of the DP_COM control block (for
|
|
"qcom,sdm845-qmp-usb3-phy" only).
|
|
|
|
- reg-names:
|
|
- For "qcom,sdm845-qmp-usb3-phy":
|
|
- Should be: "reg-base", "dp_com"
|
|
- For all others:
|
|
- The reg-names property shouldn't be defined.
|
|
|
|
- #address-cells: must be 1
|
|
- #size-cells: must be 1
|
|
- ranges: must be present
|
|
|
|
- clocks: a list of phandles and clock-specifier pairs,
|
|
one for each entry in clock-names.
|
|
- clock-names: "cfg_ahb" for phy config clock,
|
|
"aux" for phy aux clock,
|
|
"ref" for 19.2 MHz ref clk,
|
|
"com_aux" for phy common block aux clock,
|
|
"ref_aux" for phy reference aux clock,
|
|
|
|
For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
|
|
For "qcom,msm8996-qmp-pcie-phy" must contain:
|
|
"aux", "cfg_ahb", "ref".
|
|
For "qcom,msm8996-qmp-usb3-phy" must contain:
|
|
"aux", "cfg_ahb", "ref".
|
|
For "qcom,msm8998-qmp-usb3-phy" must contain:
|
|
"aux", "cfg_ahb", "ref".
|
|
For "qcom,msm8998-qmp-ufs-phy" must contain:
|
|
"ref", "ref_aux".
|
|
For "qcom,sdm845-qmp-usb3-phy" must contain:
|
|
"aux", "cfg_ahb", "ref", "com_aux".
|
|
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
|
|
"aux", "cfg_ahb", "ref", "com_aux".
|
|
For "qcom,sdm845-qmp-ufs-phy" must contain:
|
|
"ref", "ref_aux".
|
|
|
|
- resets: a list of phandles and reset controller specifier pairs,
|
|
one for each entry in reset-names.
|
|
- reset-names: "phy" for reset of phy block,
|
|
"common" for phy common block reset,
|
|
"cfg" for phy's ahb cfg block reset.
|
|
|
|
For "qcom,ipq8074-qmp-pcie-phy" must contain:
|
|
"phy", "common".
|
|
For "qcom,msm8996-qmp-pcie-phy" must contain:
|
|
"phy", "common", "cfg".
|
|
For "qcom,msm8996-qmp-usb3-phy" must contain
|
|
"phy", "common".
|
|
For "qcom,msm8998-qmp-usb3-phy" must contain
|
|
"phy", "common".
|
|
For "qcom,msm8998-qmp-ufs-phy": no resets are listed.
|
|
For "qcom,sdm845-qmp-usb3-phy" must contain:
|
|
"phy", "common".
|
|
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
|
|
"phy", "common".
|
|
For "qcom,sdm845-qmp-ufs-phy": no resets are listed.
|
|
|
|
- vdda-phy-supply: Phandle to a regulator supply to PHY core block.
|
|
- vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
|
|
|
|
Optional properties:
|
|
- vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk
|
|
pll block.
|
|
|
|
Required nodes:
|
|
- Each device node of QMP phy is required to have as many child nodes as
|
|
the number of lanes the PHY has.
|
|
|
|
Required properties for child nodes of PCIe PHYs (one child per lane):
|
|
- reg: list of offset and length pairs of register sets for PHY blocks -
|
|
tx, rx, pcs, and pcs_misc (optional).
|
|
- #phy-cells: must be 0
|
|
|
|
Required properties for a single "lanes" child node of non-PCIe PHYs:
|
|
- reg: list of offset and length pairs of register sets for PHY blocks
|
|
For 1-lane devices:
|
|
tx, rx, pcs, and (optionally) pcs_misc
|
|
For 2-lane devices:
|
|
tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc
|
|
- #phy-cells: must be 0
|
|
|
|
Required properties for child node of PCIe and USB3 qmp phys:
|
|
- clocks: a list of phandles and clock-specifier pairs,
|
|
one for each entry in clock-names.
|
|
- clock-names: Must contain following:
|
|
"pipe<lane-number>" for pipe clock specific to each lane.
|
|
- clock-output-names: Name of the PHY clock that will be the parent for
|
|
the above pipe clock.
|
|
For "qcom,ipq8074-qmp-pcie-phy":
|
|
- "pcie20_phy0_pipe_clk" Pipe Clock parent
|
|
(or)
|
|
"pcie20_phy1_pipe_clk"
|
|
- #clock-cells: must be 0
|
|
- Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then
|
|
gate-controlled by the gcc.
|
|
|
|
Required properties for child node of PHYs with lane reset, AKA:
|
|
"qcom,msm8996-qmp-pcie-phy"
|
|
- resets: a list of phandles and reset controller specifier pairs,
|
|
one for each entry in reset-names.
|
|
- reset-names: Must contain following:
|
|
"lane<lane-number>" for reset specific to each lane.
|
|
|
|
Example:
|
|
phy@34000 {
|
|
compatible = "qcom,msm8996-qmp-pcie-phy";
|
|
reg = <0x34000 0x488>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
|
|
<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
|
|
<&gcc GCC_PCIE_CLKREF_CLK>;
|
|
clock-names = "aux", "cfg_ahb", "ref";
|
|
|
|
vdda-phy-supply = <&pm8994_l28>;
|
|
vdda-pll-supply = <&pm8994_l12>;
|
|
|
|
resets = <&gcc GCC_PCIE_PHY_BCR>,
|
|
<&gcc GCC_PCIE_PHY_COM_BCR>,
|
|
<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
|
|
reset-names = "phy", "common", "cfg";
|
|
|
|
pciephy_0: lane@35000 {
|
|
reg = <0x35000 0x130>,
|
|
<0x35200 0x200>,
|
|
<0x35400 0x1dc>;
|
|
#clock-cells = <0>;
|
|
#phy-cells = <0>;
|
|
|
|
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
|
|
clock-names = "pipe0";
|
|
clock-output-names = "pcie_0_pipe_clk_src";
|
|
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
|
|
reset-names = "lane0";
|
|
};
|
|
|
|
pciephy_1: lane@36000 {
|
|
...
|
|
...
|
|
};
|
|
|
|
phy@88eb000 {
|
|
compatible = "qcom,sdm845-qmp-usb3-uni-phy";
|
|
reg = <0x88eb000 0x18c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
|
|
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
|
|
<&gcc GCC_USB3_SEC_CLKREF_CLK>,
|
|
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
|
|
clock-names = "aux", "cfg_ahb", "ref", "com_aux";
|
|
|
|
resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
|
|
<&gcc GCC_USB3_PHY_SEC_BCR>;
|
|
reset-names = "phy", "common";
|
|
|
|
lane@88eb200 {
|
|
reg = <0x88eb200 0x128>,
|
|
<0x88eb400 0x1fc>,
|
|
<0x88eb800 0x218>,
|
|
<0x88eb600 0x70>;
|
|
#clock-cells = <0>;
|
|
#phy-cells = <0>;
|
|
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
|
|
clock-names = "pipe0";
|
|
clock-output-names = "usb3_uni_phy_pipe_clk_src";
|
|
};
|
|
};
|
|
|
|
phy@1d87000 {
|
|
compatible = "qcom,sdm845-qmp-ufs-phy";
|
|
reg = <0x1d87000 0x18c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clock-names = "ref",
|
|
"ref_aux";
|
|
clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
|
|
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
|
|
|
|
lanes@1d87400 {
|
|
reg = <0x1d87400 0x108>,
|
|
<0x1d87600 0x1e0>,
|
|
<0x1d87c00 0x1dc>,
|
|
<0x1d87800 0x108>,
|
|
<0x1d87a00 0x1e0>;
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|