linux/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
Matthias Brugger f5e489e6ee dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
This patch add the binding documentation for the iommu and smi
devices on the MT7623 SoC.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-10-05 10:11:33 +02:00

45 lines
1.5 KiB
Plaintext

SMI (Smart Multimedia Interface) Local Arbiter
The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
Required properties:
- compatible : must be one of :
"mediatek,mt2701-smi-larb"
"mediatek,mt2712-smi-larb"
"mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
"mediatek,mt8173-smi-larb"
- reg : the register and size of this local arbiter.
- mediatek,smi : a phandle to the smi_common node.
- power-domains : a phandle to the power domain of this local arbiter.
- clocks : Must contain an entry for each entry in clock-names.
- clock-names: must contain 2 entries, as follows:
- "apb" : Advanced Peripheral Bus clock, It's the clock for setting
the register.
- "smi" : It's the clock for transfer data and command.
Required property for mt2701, mt2712 and mt7623:
- mediatek,larb-id :the hardware id of this larb.
Example:
larb1: larb@16010000 {
compatible = "mediatek,mt8173-smi-larb";
reg = <0 0x16010000 0 0x1000>;
mediatek,smi = <&smi_common>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
clocks = <&vdecsys CLK_VDEC_CKEN>,
<&vdecsys CLK_VDEC_LARB_CKEN>;
clock-names = "apb", "smi";
};
Example for mt2701:
larb0: larb@14010000 {
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x14010000 0 0x1000>;
mediatek,smi = <&smi_common>;
mediatek,larb-id = <0>;
clocks = <&mmsys CLK_MM_SMI_LARB0>,
<&mmsys CLK_MM_SMI_LARB0>;
clock-names = "apb", "smi";
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};