mirror of
https://github.com/torvalds/linux.git
synced 2024-12-15 07:33:56 +00:00
bd0b9ac405
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
916 lines
24 KiB
C
916 lines
24 KiB
C
/*
|
|
* linux/arch/arm/common/locomo.c
|
|
*
|
|
* Sharp LoCoMo support
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This file contains all generic LoCoMo support.
|
|
*
|
|
* All initialization functions provided here are intended to be called
|
|
* from machine specific code with proper arguments when required.
|
|
*
|
|
* Based on sa1111.c
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <asm/hardware/locomo.h>
|
|
|
|
/* LoCoMo Interrupts */
|
|
#define IRQ_LOCOMO_KEY (0)
|
|
#define IRQ_LOCOMO_GPIO (1)
|
|
#define IRQ_LOCOMO_LT (2)
|
|
#define IRQ_LOCOMO_SPI (3)
|
|
|
|
/* M62332 output channel selection */
|
|
#define M62332_EVR_CH 1 /* M62332 volume channel number */
|
|
/* 0 : CH.1 , 1 : CH. 2 */
|
|
/* DAC send data */
|
|
#define M62332_SLAVE_ADDR 0x4e /* Slave address */
|
|
#define M62332_W_BIT 0x00 /* W bit (0 only) */
|
|
#define M62332_SUB_ADDR 0x00 /* Sub address */
|
|
#define M62332_A_BIT 0x00 /* A bit (0 only) */
|
|
|
|
/* DAC setup and hold times (expressed in us) */
|
|
#define DAC_BUS_FREE_TIME 5 /* 4.7 us */
|
|
#define DAC_START_SETUP_TIME 5 /* 4.7 us */
|
|
#define DAC_STOP_SETUP_TIME 4 /* 4.0 us */
|
|
#define DAC_START_HOLD_TIME 5 /* 4.7 us */
|
|
#define DAC_SCL_LOW_HOLD_TIME 5 /* 4.7 us */
|
|
#define DAC_SCL_HIGH_HOLD_TIME 4 /* 4.0 us */
|
|
#define DAC_DATA_SETUP_TIME 1 /* 250 ns */
|
|
#define DAC_DATA_HOLD_TIME 1 /* 300 ns */
|
|
#define DAC_LOW_SETUP_TIME 1 /* 300 ns */
|
|
#define DAC_HIGH_SETUP_TIME 1 /* 1000 ns */
|
|
|
|
/* the following is the overall data for the locomo chip */
|
|
struct locomo {
|
|
struct device *dev;
|
|
unsigned long phys;
|
|
unsigned int irq;
|
|
int irq_base;
|
|
spinlock_t lock;
|
|
void __iomem *base;
|
|
#ifdef CONFIG_PM
|
|
void *saved_state;
|
|
#endif
|
|
};
|
|
|
|
struct locomo_dev_info {
|
|
unsigned long offset;
|
|
unsigned long length;
|
|
unsigned int devid;
|
|
unsigned int irq[1];
|
|
const char * name;
|
|
};
|
|
|
|
/* All the locomo devices. If offset is non-zero, the mapbase for the
|
|
* locomo_dev will be set to the chip base plus offset. If offset is
|
|
* zero, then the mapbase for the locomo_dev will be set to zero. An
|
|
* offset of zero means the device only uses GPIOs or other helper
|
|
* functions inside this file */
|
|
static struct locomo_dev_info locomo_devices[] = {
|
|
{
|
|
.devid = LOCOMO_DEVID_KEYBOARD,
|
|
.irq = { IRQ_LOCOMO_KEY },
|
|
.name = "locomo-keyboard",
|
|
.offset = LOCOMO_KEYBOARD,
|
|
.length = 16,
|
|
},
|
|
{
|
|
.devid = LOCOMO_DEVID_FRONTLIGHT,
|
|
.irq = {},
|
|
.name = "locomo-frontlight",
|
|
.offset = LOCOMO_FRONTLIGHT,
|
|
.length = 8,
|
|
|
|
},
|
|
{
|
|
.devid = LOCOMO_DEVID_BACKLIGHT,
|
|
.irq = {},
|
|
.name = "locomo-backlight",
|
|
.offset = LOCOMO_BACKLIGHT,
|
|
.length = 8,
|
|
},
|
|
{
|
|
.devid = LOCOMO_DEVID_AUDIO,
|
|
.irq = {},
|
|
.name = "locomo-audio",
|
|
.offset = LOCOMO_AUDIO,
|
|
.length = 4,
|
|
},
|
|
{
|
|
.devid = LOCOMO_DEVID_LED,
|
|
.irq = {},
|
|
.name = "locomo-led",
|
|
.offset = LOCOMO_LED,
|
|
.length = 8,
|
|
},
|
|
{
|
|
.devid = LOCOMO_DEVID_UART,
|
|
.irq = {},
|
|
.name = "locomo-uart",
|
|
.offset = 0,
|
|
.length = 0,
|
|
},
|
|
{
|
|
.devid = LOCOMO_DEVID_SPI,
|
|
.irq = {},
|
|
.name = "locomo-spi",
|
|
.offset = LOCOMO_SPI,
|
|
.length = 0x30,
|
|
},
|
|
};
|
|
|
|
static void locomo_handler(struct irq_desc *desc)
|
|
{
|
|
struct locomo *lchip = irq_desc_get_chip_data(desc);
|
|
int req, i;
|
|
|
|
/* Acknowledge the parent IRQ */
|
|
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
|
|
|
/* check why this interrupt was generated */
|
|
req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
|
|
|
|
if (req) {
|
|
unsigned int irq;
|
|
|
|
/* generate the next interrupt(s) */
|
|
irq = lchip->irq_base;
|
|
for (i = 0; i <= 3; i++, irq++) {
|
|
if (req & (0x0100 << i)) {
|
|
generic_handle_irq(irq);
|
|
}
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
static void locomo_ack_irq(struct irq_data *d)
|
|
{
|
|
}
|
|
|
|
static void locomo_mask_irq(struct irq_data *d)
|
|
{
|
|
struct locomo *lchip = irq_data_get_irq_chip_data(d);
|
|
unsigned int r;
|
|
r = locomo_readl(lchip->base + LOCOMO_ICR);
|
|
r &= ~(0x0010 << (d->irq - lchip->irq_base));
|
|
locomo_writel(r, lchip->base + LOCOMO_ICR);
|
|
}
|
|
|
|
static void locomo_unmask_irq(struct irq_data *d)
|
|
{
|
|
struct locomo *lchip = irq_data_get_irq_chip_data(d);
|
|
unsigned int r;
|
|
r = locomo_readl(lchip->base + LOCOMO_ICR);
|
|
r |= (0x0010 << (d->irq - lchip->irq_base));
|
|
locomo_writel(r, lchip->base + LOCOMO_ICR);
|
|
}
|
|
|
|
static struct irq_chip locomo_chip = {
|
|
.name = "LOCOMO",
|
|
.irq_ack = locomo_ack_irq,
|
|
.irq_mask = locomo_mask_irq,
|
|
.irq_unmask = locomo_unmask_irq,
|
|
};
|
|
|
|
static void locomo_setup_irq(struct locomo *lchip)
|
|
{
|
|
int irq = lchip->irq_base;
|
|
|
|
/*
|
|
* Install handler for IRQ_LOCOMO_HW.
|
|
*/
|
|
irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
|
|
irq_set_chip_data(lchip->irq, lchip);
|
|
irq_set_chained_handler(lchip->irq, locomo_handler);
|
|
|
|
/* Install handlers for IRQ_LOCOMO_* */
|
|
for ( ; irq <= lchip->irq_base + 3; irq++) {
|
|
irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq);
|
|
irq_set_chip_data(irq, lchip);
|
|
irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
|
|
}
|
|
}
|
|
|
|
|
|
static void locomo_dev_release(struct device *_dev)
|
|
{
|
|
struct locomo_dev *dev = LOCOMO_DEV(_dev);
|
|
|
|
kfree(dev);
|
|
}
|
|
|
|
static int
|
|
locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
|
|
{
|
|
struct locomo_dev *dev;
|
|
int ret;
|
|
|
|
dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* If the parent device has a DMA mask associated with it,
|
|
* propagate it down to the children.
|
|
*/
|
|
if (lchip->dev->dma_mask) {
|
|
dev->dma_mask = *lchip->dev->dma_mask;
|
|
dev->dev.dma_mask = &dev->dma_mask;
|
|
}
|
|
|
|
dev_set_name(&dev->dev, "%s", info->name);
|
|
dev->devid = info->devid;
|
|
dev->dev.parent = lchip->dev;
|
|
dev->dev.bus = &locomo_bus_type;
|
|
dev->dev.release = locomo_dev_release;
|
|
dev->dev.coherent_dma_mask = lchip->dev->coherent_dma_mask;
|
|
|
|
if (info->offset)
|
|
dev->mapbase = lchip->base + info->offset;
|
|
else
|
|
dev->mapbase = 0;
|
|
dev->length = info->length;
|
|
|
|
dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
|
|
NO_IRQ : lchip->irq_base + info->irq[0];
|
|
|
|
ret = device_register(&dev->dev);
|
|
if (ret) {
|
|
out:
|
|
kfree(dev);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
struct locomo_save_data {
|
|
u16 LCM_GPO;
|
|
u16 LCM_SPICT;
|
|
u16 LCM_GPE;
|
|
u16 LCM_ASD;
|
|
u16 LCM_SPIMD;
|
|
};
|
|
|
|
static int locomo_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct locomo *lchip = platform_get_drvdata(dev);
|
|
struct locomo_save_data *save;
|
|
unsigned long flags;
|
|
|
|
save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
|
|
if (!save)
|
|
return -ENOMEM;
|
|
|
|
lchip->saved_state = save;
|
|
|
|
spin_lock_irqsave(&lchip->lock, flags);
|
|
|
|
save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
|
|
locomo_writel(0x00, lchip->base + LOCOMO_GPO);
|
|
save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
|
|
locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
|
|
save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */
|
|
locomo_writel(0x00, lchip->base + LOCOMO_GPE);
|
|
save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */
|
|
locomo_writel(0x00, lchip->base + LOCOMO_ASD);
|
|
save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); /* SPI */
|
|
locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
|
|
|
|
locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
|
|
locomo_writel(0x00, lchip->base + LOCOMO_DAC);
|
|
locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
|
|
|
|
if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
|
|
locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */
|
|
else
|
|
/* 18MHz already enabled, so no wait */
|
|
locomo_writel(0xc1, lchip->base + LOCOMO_C32K); /* CLK32 on */
|
|
|
|
locomo_writel(0x00, lchip->base + LOCOMO_TADC); /* 18MHz clock off*/
|
|
locomo_writel(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC); /* 22MHz/24MHz clock off */
|
|
locomo_writel(0x00, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); /* FL */
|
|
|
|
spin_unlock_irqrestore(&lchip->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int locomo_resume(struct platform_device *dev)
|
|
{
|
|
struct locomo *lchip = platform_get_drvdata(dev);
|
|
struct locomo_save_data *save;
|
|
unsigned long r;
|
|
unsigned long flags;
|
|
|
|
save = lchip->saved_state;
|
|
if (!save)
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&lchip->lock, flags);
|
|
|
|
locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
|
|
locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
|
|
locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
|
|
locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
|
|
locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
|
|
|
|
locomo_writel(0x00, lchip->base + LOCOMO_C32K);
|
|
locomo_writel(0x90, lchip->base + LOCOMO_TADC);
|
|
|
|
locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KSC);
|
|
r = locomo_readl(lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
|
|
r &= 0xFEFF;
|
|
locomo_writel(r, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
|
|
locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD);
|
|
|
|
spin_unlock_irqrestore(&lchip->lock, flags);
|
|
|
|
lchip->saved_state = NULL;
|
|
kfree(save);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
|
|
/**
|
|
* locomo_probe - probe for a single LoCoMo chip.
|
|
* @phys_addr: physical address of device.
|
|
*
|
|
* Probe for a LoCoMo chip. This must be called
|
|
* before any other locomo-specific code.
|
|
*
|
|
* Returns:
|
|
* %-ENODEV device not found.
|
|
* %-EBUSY physical address already marked in-use.
|
|
* %0 successful.
|
|
*/
|
|
static int
|
|
__locomo_probe(struct device *me, struct resource *mem, int irq)
|
|
{
|
|
struct locomo_platform_data *pdata = me->platform_data;
|
|
struct locomo *lchip;
|
|
unsigned long r;
|
|
int i, ret = -ENODEV;
|
|
|
|
lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL);
|
|
if (!lchip)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&lchip->lock);
|
|
|
|
lchip->dev = me;
|
|
dev_set_drvdata(lchip->dev, lchip);
|
|
|
|
lchip->phys = mem->start;
|
|
lchip->irq = irq;
|
|
lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
|
|
|
|
/*
|
|
* Map the whole region. This also maps the
|
|
* registers for our children.
|
|
*/
|
|
lchip->base = ioremap(mem->start, PAGE_SIZE);
|
|
if (!lchip->base) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
/* locomo initialize */
|
|
locomo_writel(0, lchip->base + LOCOMO_ICR);
|
|
/* KEYBOARD */
|
|
locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
|
|
|
|
/* GPIO */
|
|
locomo_writel(0, lchip->base + LOCOMO_GPO);
|
|
locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
|
|
, lchip->base + LOCOMO_GPE);
|
|
locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
|
|
, lchip->base + LOCOMO_GPD);
|
|
locomo_writel(0, lchip->base + LOCOMO_GIE);
|
|
|
|
/* Frontlight */
|
|
locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
|
|
locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
|
|
|
|
/* Longtime timer */
|
|
locomo_writel(0, lchip->base + LOCOMO_LTINT);
|
|
/* SPI */
|
|
locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
|
|
|
|
locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
|
|
r = locomo_readl(lchip->base + LOCOMO_ASD);
|
|
r |= 0x8000;
|
|
locomo_writel(r, lchip->base + LOCOMO_ASD);
|
|
|
|
locomo_writel(6 + 8 + 320 + 30 - 10 - 128 + 4, lchip->base + LOCOMO_HSD);
|
|
r = locomo_readl(lchip->base + LOCOMO_HSD);
|
|
r |= 0x8000;
|
|
locomo_writel(r, lchip->base + LOCOMO_HSD);
|
|
|
|
locomo_writel(128 / 8, lchip->base + LOCOMO_HSC);
|
|
|
|
/* XON */
|
|
locomo_writel(0x80, lchip->base + LOCOMO_TADC);
|
|
udelay(1000);
|
|
/* CLK9MEN */
|
|
r = locomo_readl(lchip->base + LOCOMO_TADC);
|
|
r |= 0x10;
|
|
locomo_writel(r, lchip->base + LOCOMO_TADC);
|
|
udelay(100);
|
|
|
|
/* init DAC */
|
|
r = locomo_readl(lchip->base + LOCOMO_DAC);
|
|
r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
|
|
locomo_writel(r, lchip->base + LOCOMO_DAC);
|
|
|
|
r = locomo_readl(lchip->base + LOCOMO_VER);
|
|
printk(KERN_INFO "LoCoMo Chip: %lu%lu\n", (r >> 8), (r & 0xff));
|
|
|
|
/*
|
|
* The interrupt controller must be initialised before any
|
|
* other device to ensure that the interrupts are available.
|
|
*/
|
|
if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
|
|
locomo_setup_irq(lchip);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
|
|
locomo_init_one_child(lchip, &locomo_devices[i]);
|
|
return 0;
|
|
|
|
out:
|
|
kfree(lchip);
|
|
return ret;
|
|
}
|
|
|
|
static int locomo_remove_child(struct device *dev, void *data)
|
|
{
|
|
device_unregister(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void __locomo_remove(struct locomo *lchip)
|
|
{
|
|
device_for_each_child(lchip->dev, NULL, locomo_remove_child);
|
|
|
|
if (lchip->irq != NO_IRQ) {
|
|
irq_set_chained_handler_and_data(lchip->irq, NULL, NULL);
|
|
}
|
|
|
|
iounmap(lchip->base);
|
|
kfree(lchip);
|
|
}
|
|
|
|
static int locomo_probe(struct platform_device *dev)
|
|
{
|
|
struct resource *mem;
|
|
int irq;
|
|
|
|
mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
if (!mem)
|
|
return -EINVAL;
|
|
irq = platform_get_irq(dev, 0);
|
|
if (irq < 0)
|
|
return -ENXIO;
|
|
|
|
return __locomo_probe(&dev->dev, mem, irq);
|
|
}
|
|
|
|
static int locomo_remove(struct platform_device *dev)
|
|
{
|
|
struct locomo *lchip = platform_get_drvdata(dev);
|
|
|
|
if (lchip) {
|
|
__locomo_remove(lchip);
|
|
platform_set_drvdata(dev, NULL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Not sure if this should be on the system bus or not yet.
|
|
* We really want some way to register a system device at
|
|
* the per-machine level, and then have this driver pick
|
|
* up the registered devices.
|
|
*/
|
|
static struct platform_driver locomo_device_driver = {
|
|
.probe = locomo_probe,
|
|
.remove = locomo_remove,
|
|
#ifdef CONFIG_PM
|
|
.suspend = locomo_suspend,
|
|
.resume = locomo_resume,
|
|
#endif
|
|
.driver = {
|
|
.name = "locomo",
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Get the parent device driver (us) structure
|
|
* from a child function device
|
|
*/
|
|
static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev)
|
|
{
|
|
return (struct locomo *)dev_get_drvdata(ldev->dev.parent);
|
|
}
|
|
|
|
void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir)
|
|
{
|
|
struct locomo *lchip = dev_get_drvdata(dev);
|
|
unsigned long flags;
|
|
unsigned int r;
|
|
|
|
if (!lchip)
|
|
return;
|
|
|
|
spin_lock_irqsave(&lchip->lock, flags);
|
|
|
|
r = locomo_readl(lchip->base + LOCOMO_GPD);
|
|
if (dir)
|
|
r |= bits;
|
|
else
|
|
r &= ~bits;
|
|
locomo_writel(r, lchip->base + LOCOMO_GPD);
|
|
|
|
r = locomo_readl(lchip->base + LOCOMO_GPE);
|
|
if (dir)
|
|
r |= bits;
|
|
else
|
|
r &= ~bits;
|
|
locomo_writel(r, lchip->base + LOCOMO_GPE);
|
|
|
|
spin_unlock_irqrestore(&lchip->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(locomo_gpio_set_dir);
|
|
|
|
int locomo_gpio_read_level(struct device *dev, unsigned int bits)
|
|
{
|
|
struct locomo *lchip = dev_get_drvdata(dev);
|
|
unsigned long flags;
|
|
unsigned int ret;
|
|
|
|
if (!lchip)
|
|
return -ENODEV;
|
|
|
|
spin_lock_irqsave(&lchip->lock, flags);
|
|
ret = locomo_readl(lchip->base + LOCOMO_GPL);
|
|
spin_unlock_irqrestore(&lchip->lock, flags);
|
|
|
|
ret &= bits;
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(locomo_gpio_read_level);
|
|
|
|
int locomo_gpio_read_output(struct device *dev, unsigned int bits)
|
|
{
|
|
struct locomo *lchip = dev_get_drvdata(dev);
|
|
unsigned long flags;
|
|
unsigned int ret;
|
|
|
|
if (!lchip)
|
|
return -ENODEV;
|
|
|
|
spin_lock_irqsave(&lchip->lock, flags);
|
|
ret = locomo_readl(lchip->base + LOCOMO_GPO);
|
|
spin_unlock_irqrestore(&lchip->lock, flags);
|
|
|
|
ret &= bits;
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(locomo_gpio_read_output);
|
|
|
|
void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
|
|
{
|
|
struct locomo *lchip = dev_get_drvdata(dev);
|
|
unsigned long flags;
|
|
unsigned int r;
|
|
|
|
if (!lchip)
|
|
return;
|
|
|
|
spin_lock_irqsave(&lchip->lock, flags);
|
|
|
|
r = locomo_readl(lchip->base + LOCOMO_GPO);
|
|
if (set)
|
|
r |= bits;
|
|
else
|
|
r &= ~bits;
|
|
locomo_writel(r, lchip->base + LOCOMO_GPO);
|
|
|
|
spin_unlock_irqrestore(&lchip->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(locomo_gpio_write);
|
|
|
|
static void locomo_m62332_sendbit(void *mapbase, int bit)
|
|
{
|
|
unsigned int r;
|
|
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SCLOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
|
|
udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SCLOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
|
|
udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
|
|
|
|
if (bit & 1) {
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r |= LOCOMO_DAC_SDAOEB;
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
|
|
} else {
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SDAOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
|
|
}
|
|
|
|
udelay(DAC_DATA_SETUP_TIME); /* 250 nsec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r |= LOCOMO_DAC_SCLOEB;
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
|
|
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.0 usec */
|
|
}
|
|
|
|
void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel)
|
|
{
|
|
struct locomo *lchip = locomo_chip_driver(ldev);
|
|
int i;
|
|
unsigned char data;
|
|
unsigned int r;
|
|
void *mapbase = lchip->base;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&lchip->lock, flags);
|
|
|
|
/* Start */
|
|
udelay(DAC_BUS_FREE_TIME); /* 5.0 usec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
|
|
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.0 usec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SDAOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_START_HOLD_TIME); /* 5.0 usec */
|
|
udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */
|
|
|
|
/* Send slave address and W bit (LSB is W bit) */
|
|
data = (M62332_SLAVE_ADDR << 1) | M62332_W_BIT;
|
|
for (i = 1; i <= 8; i++) {
|
|
locomo_m62332_sendbit(mapbase, data >> (8 - i));
|
|
}
|
|
|
|
/* Check A bit */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SCLOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
|
|
udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SDAOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r |= LOCOMO_DAC_SCLOEB;
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
|
|
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
|
|
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
|
|
printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
|
|
goto out;
|
|
}
|
|
|
|
/* Send Sub address (LSB is channel select) */
|
|
/* channel = 0 : ch1 select */
|
|
/* = 1 : ch2 select */
|
|
data = M62332_SUB_ADDR + channel;
|
|
for (i = 1; i <= 8; i++) {
|
|
locomo_m62332_sendbit(mapbase, data >> (8 - i));
|
|
}
|
|
|
|
/* Check A bit */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SCLOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
|
|
udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SDAOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r |= LOCOMO_DAC_SCLOEB;
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
|
|
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
|
|
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
|
|
printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
|
|
goto out;
|
|
}
|
|
|
|
/* Send DAC data */
|
|
for (i = 1; i <= 8; i++) {
|
|
locomo_m62332_sendbit(mapbase, dac_data >> (8 - i));
|
|
}
|
|
|
|
/* Check A bit */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SCLOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
|
|
udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SDAOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r |= LOCOMO_DAC_SCLOEB;
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
|
|
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
|
|
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
|
|
printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
|
|
}
|
|
|
|
out:
|
|
/* stop */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r &= ~(LOCOMO_DAC_SCLOEB);
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
|
|
udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r |= LOCOMO_DAC_SCLOEB;
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
|
|
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4 usec */
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r |= LOCOMO_DAC_SDAOEB;
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
|
|
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4 usec */
|
|
|
|
r = locomo_readl(mapbase + LOCOMO_DAC);
|
|
r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
|
|
locomo_writel(r, mapbase + LOCOMO_DAC);
|
|
udelay(DAC_LOW_SETUP_TIME); /* 1000 nsec */
|
|
udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
|
|
|
|
spin_unlock_irqrestore(&lchip->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(locomo_m62332_senddata);
|
|
|
|
/*
|
|
* Frontlight control
|
|
*/
|
|
|
|
void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
|
|
{
|
|
unsigned long flags;
|
|
struct locomo *lchip = locomo_chip_driver(dev);
|
|
|
|
if (vr)
|
|
locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1);
|
|
else
|
|
locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
|
|
|
|
spin_lock_irqsave(&lchip->lock, flags);
|
|
locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
|
|
udelay(100);
|
|
locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
|
|
locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
|
|
spin_unlock_irqrestore(&lchip->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(locomo_frontlight_set);
|
|
|
|
/*
|
|
* LoCoMo "Register Access Bus."
|
|
*
|
|
* We model this as a regular bus type, and hang devices directly
|
|
* off this.
|
|
*/
|
|
static int locomo_match(struct device *_dev, struct device_driver *_drv)
|
|
{
|
|
struct locomo_dev *dev = LOCOMO_DEV(_dev);
|
|
struct locomo_driver *drv = LOCOMO_DRV(_drv);
|
|
|
|
return dev->devid == drv->devid;
|
|
}
|
|
|
|
static int locomo_bus_suspend(struct device *dev, pm_message_t state)
|
|
{
|
|
struct locomo_dev *ldev = LOCOMO_DEV(dev);
|
|
struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
|
|
int ret = 0;
|
|
|
|
if (drv && drv->suspend)
|
|
ret = drv->suspend(ldev, state);
|
|
return ret;
|
|
}
|
|
|
|
static int locomo_bus_resume(struct device *dev)
|
|
{
|
|
struct locomo_dev *ldev = LOCOMO_DEV(dev);
|
|
struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
|
|
int ret = 0;
|
|
|
|
if (drv && drv->resume)
|
|
ret = drv->resume(ldev);
|
|
return ret;
|
|
}
|
|
|
|
static int locomo_bus_probe(struct device *dev)
|
|
{
|
|
struct locomo_dev *ldev = LOCOMO_DEV(dev);
|
|
struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
|
|
int ret = -ENODEV;
|
|
|
|
if (drv->probe)
|
|
ret = drv->probe(ldev);
|
|
return ret;
|
|
}
|
|
|
|
static int locomo_bus_remove(struct device *dev)
|
|
{
|
|
struct locomo_dev *ldev = LOCOMO_DEV(dev);
|
|
struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
|
|
int ret = 0;
|
|
|
|
if (drv->remove)
|
|
ret = drv->remove(ldev);
|
|
return ret;
|
|
}
|
|
|
|
struct bus_type locomo_bus_type = {
|
|
.name = "locomo-bus",
|
|
.match = locomo_match,
|
|
.probe = locomo_bus_probe,
|
|
.remove = locomo_bus_remove,
|
|
.suspend = locomo_bus_suspend,
|
|
.resume = locomo_bus_resume,
|
|
};
|
|
|
|
int locomo_driver_register(struct locomo_driver *driver)
|
|
{
|
|
driver->drv.bus = &locomo_bus_type;
|
|
return driver_register(&driver->drv);
|
|
}
|
|
EXPORT_SYMBOL(locomo_driver_register);
|
|
|
|
void locomo_driver_unregister(struct locomo_driver *driver)
|
|
{
|
|
driver_unregister(&driver->drv);
|
|
}
|
|
EXPORT_SYMBOL(locomo_driver_unregister);
|
|
|
|
static int __init locomo_init(void)
|
|
{
|
|
int ret = bus_register(&locomo_bus_type);
|
|
if (ret == 0)
|
|
platform_driver_register(&locomo_device_driver);
|
|
return ret;
|
|
}
|
|
|
|
static void __exit locomo_exit(void)
|
|
{
|
|
platform_driver_unregister(&locomo_device_driver);
|
|
bus_unregister(&locomo_bus_type);
|
|
}
|
|
|
|
module_init(locomo_init);
|
|
module_exit(locomo_exit);
|
|
|
|
MODULE_DESCRIPTION("Sharp LoCoMo core driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
|