mirror of
https://github.com/torvalds/linux.git
synced 2024-12-16 16:12:52 +00:00
b37bde1478
This is the driver for latest Blackfin on-chip nand flash controller - use nand_chip and mtd_info common nand driver interface - provide both PIO and dma operation - compiled with ezkit bf548 configuration - use hardware 1-bit ECC - tested with YAFFS2 and can mount YAFFS2 filesystem as rootfs ChangeLog from try#1 - use hweight32() instead of count_bits() - replace bf54x with bf5xx and BF54X with BF5XX - compare against plat->page_size in 2 cases when enable hardware ECC ChangeLog from try#2 - passed nand_test suites - use cpu_relax() instead of busy wait loop - some coding style issue pointed out by Andrew Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
34 lines
1.2 KiB
Makefile
34 lines
1.2 KiB
Makefile
#
|
|
# linux/drivers/nand/Makefile
|
|
#
|
|
# $Id: Makefile.common,v 1.15 2004/11/26 12:28:22 dedekind Exp $
|
|
|
|
obj-$(CONFIG_MTD_NAND) += nand.o nand_ecc.o
|
|
obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o
|
|
|
|
obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
|
|
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
|
|
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
|
|
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
|
|
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
|
|
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
|
|
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
|
|
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
|
|
obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
|
|
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
|
|
obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
|
|
obj-$(CONFIG_MTD_NAND_H1900) += h1910.o
|
|
obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o
|
|
obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o
|
|
obj-$(CONFIG_MTD_NAND_TS7250) += ts7250.o
|
|
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
|
|
obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
|
|
obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
|
|
obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
|
|
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
|
|
obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
|
|
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
|
|
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
|
|
|
|
nand-objs := nand_base.o nand_bbt.o
|