mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 21:33:00 +00:00
4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
29 lines
839 B
Plaintext
29 lines
839 B
Plaintext
* Clock bindings for Freescale i.MX5
|
|
|
|
Required properties:
|
|
- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
|
|
- reg: Address and length of the register set
|
|
- interrupts: Should contain CCM interrupt
|
|
- #clock-cells: Should be <1>
|
|
|
|
The clock consumer should specify the desired clock by having the clock
|
|
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
|
|
for the full list of i.MX5 clock IDs.
|
|
|
|
Examples (for mx53):
|
|
|
|
clks: ccm@53fd4000{
|
|
compatible = "fsl,imx53-ccm";
|
|
reg = <0x53fd4000 0x4000>;
|
|
interrupts = <0 71 0x04 0 72 0x04>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
can1: can@53fc8000 {
|
|
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
|
|
reg = <0x53fc8000 0x4000>;
|
|
interrupts = <82>;
|
|
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
|
|
clock-names = "ipg", "per";
|
|
};
|