mirror of
https://github.com/torvalds/linux.git
synced 2024-12-16 16:12:52 +00:00
9420e1d495
In order to implement byte queue limits (bql) in CAN drivers, the length of the CAN frame needs to be passed into the networking stack after queueing and after transmission completion. To avoid to calculate this length twice, extend can_get_echo_skb() to return that value. Convert all users of this function, too. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20210111141930.693847-14-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
1144 lines
26 KiB
C
1144 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* CAN driver for esd CAN-USB/2 and CAN-USB/Micro
|
|
*
|
|
* Copyright (C) 2010-2012 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh
|
|
*/
|
|
#include <linux/signal.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include <linux/can.h>
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
|
|
MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@esd.eu>");
|
|
MODULE_DESCRIPTION("CAN driver for esd CAN-USB/2 and CAN-USB/Micro interfaces");
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
/* Define these values to match your devices */
|
|
#define USB_ESDGMBH_VENDOR_ID 0x0ab4
|
|
#define USB_CANUSB2_PRODUCT_ID 0x0010
|
|
#define USB_CANUSBM_PRODUCT_ID 0x0011
|
|
|
|
#define ESD_USB2_CAN_CLOCK 60000000
|
|
#define ESD_USBM_CAN_CLOCK 36000000
|
|
#define ESD_USB2_MAX_NETS 2
|
|
|
|
/* USB2 commands */
|
|
#define CMD_VERSION 1 /* also used for VERSION_REPLY */
|
|
#define CMD_CAN_RX 2 /* device to host only */
|
|
#define CMD_CAN_TX 3 /* also used for TX_DONE */
|
|
#define CMD_SETBAUD 4 /* also used for SETBAUD_REPLY */
|
|
#define CMD_TS 5 /* also used for TS_REPLY */
|
|
#define CMD_IDADD 6 /* also used for IDADD_REPLY */
|
|
|
|
/* esd CAN message flags - dlc field */
|
|
#define ESD_RTR 0x10
|
|
|
|
/* esd CAN message flags - id field */
|
|
#define ESD_EXTID 0x20000000
|
|
#define ESD_EVENT 0x40000000
|
|
#define ESD_IDMASK 0x1fffffff
|
|
|
|
/* esd CAN event ids used by this driver */
|
|
#define ESD_EV_CAN_ERROR_EXT 2
|
|
|
|
/* baudrate message flags */
|
|
#define ESD_USB2_UBR 0x80000000
|
|
#define ESD_USB2_LOM 0x40000000
|
|
#define ESD_USB2_NO_BAUDRATE 0x7fffffff
|
|
#define ESD_USB2_TSEG1_MIN 1
|
|
#define ESD_USB2_TSEG1_MAX 16
|
|
#define ESD_USB2_TSEG1_SHIFT 16
|
|
#define ESD_USB2_TSEG2_MIN 1
|
|
#define ESD_USB2_TSEG2_MAX 8
|
|
#define ESD_USB2_TSEG2_SHIFT 20
|
|
#define ESD_USB2_SJW_MAX 4
|
|
#define ESD_USB2_SJW_SHIFT 14
|
|
#define ESD_USBM_SJW_SHIFT 24
|
|
#define ESD_USB2_BRP_MIN 1
|
|
#define ESD_USB2_BRP_MAX 1024
|
|
#define ESD_USB2_BRP_INC 1
|
|
#define ESD_USB2_3_SAMPLES 0x00800000
|
|
|
|
/* esd IDADD message */
|
|
#define ESD_ID_ENABLE 0x80
|
|
#define ESD_MAX_ID_SEGMENT 64
|
|
|
|
/* SJA1000 ECC register (emulated by usb2 firmware) */
|
|
#define SJA1000_ECC_SEG 0x1F
|
|
#define SJA1000_ECC_DIR 0x20
|
|
#define SJA1000_ECC_ERR 0x06
|
|
#define SJA1000_ECC_BIT 0x00
|
|
#define SJA1000_ECC_FORM 0x40
|
|
#define SJA1000_ECC_STUFF 0x80
|
|
#define SJA1000_ECC_MASK 0xc0
|
|
|
|
/* esd bus state event codes */
|
|
#define ESD_BUSSTATE_MASK 0xc0
|
|
#define ESD_BUSSTATE_WARN 0x40
|
|
#define ESD_BUSSTATE_ERRPASSIVE 0x80
|
|
#define ESD_BUSSTATE_BUSOFF 0xc0
|
|
|
|
#define RX_BUFFER_SIZE 1024
|
|
#define MAX_RX_URBS 4
|
|
#define MAX_TX_URBS 16 /* must be power of 2 */
|
|
|
|
struct header_msg {
|
|
u8 len; /* len is always the total message length in 32bit words */
|
|
u8 cmd;
|
|
u8 rsvd[2];
|
|
};
|
|
|
|
struct version_msg {
|
|
u8 len;
|
|
u8 cmd;
|
|
u8 rsvd;
|
|
u8 flags;
|
|
__le32 drv_version;
|
|
};
|
|
|
|
struct version_reply_msg {
|
|
u8 len;
|
|
u8 cmd;
|
|
u8 nets;
|
|
u8 features;
|
|
__le32 version;
|
|
u8 name[16];
|
|
__le32 rsvd;
|
|
__le32 ts;
|
|
};
|
|
|
|
struct rx_msg {
|
|
u8 len;
|
|
u8 cmd;
|
|
u8 net;
|
|
u8 dlc;
|
|
__le32 ts;
|
|
__le32 id; /* upper 3 bits contain flags */
|
|
u8 data[8];
|
|
};
|
|
|
|
struct tx_msg {
|
|
u8 len;
|
|
u8 cmd;
|
|
u8 net;
|
|
u8 dlc;
|
|
u32 hnd; /* opaque handle, not used by device */
|
|
__le32 id; /* upper 3 bits contain flags */
|
|
u8 data[8];
|
|
};
|
|
|
|
struct tx_done_msg {
|
|
u8 len;
|
|
u8 cmd;
|
|
u8 net;
|
|
u8 status;
|
|
u32 hnd; /* opaque handle, not used by device */
|
|
__le32 ts;
|
|
};
|
|
|
|
struct id_filter_msg {
|
|
u8 len;
|
|
u8 cmd;
|
|
u8 net;
|
|
u8 option;
|
|
__le32 mask[ESD_MAX_ID_SEGMENT + 1];
|
|
};
|
|
|
|
struct set_baudrate_msg {
|
|
u8 len;
|
|
u8 cmd;
|
|
u8 net;
|
|
u8 rsvd;
|
|
__le32 baud;
|
|
};
|
|
|
|
/* Main message type used between library and application */
|
|
struct __attribute__ ((packed)) esd_usb2_msg {
|
|
union {
|
|
struct header_msg hdr;
|
|
struct version_msg version;
|
|
struct version_reply_msg version_reply;
|
|
struct rx_msg rx;
|
|
struct tx_msg tx;
|
|
struct tx_done_msg txdone;
|
|
struct set_baudrate_msg setbaud;
|
|
struct id_filter_msg filter;
|
|
} msg;
|
|
};
|
|
|
|
static struct usb_device_id esd_usb2_table[] = {
|
|
{USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSB2_PRODUCT_ID)},
|
|
{USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSBM_PRODUCT_ID)},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, esd_usb2_table);
|
|
|
|
struct esd_usb2_net_priv;
|
|
|
|
struct esd_tx_urb_context {
|
|
struct esd_usb2_net_priv *priv;
|
|
u32 echo_index;
|
|
int len; /* CAN payload length */
|
|
};
|
|
|
|
struct esd_usb2 {
|
|
struct usb_device *udev;
|
|
struct esd_usb2_net_priv *nets[ESD_USB2_MAX_NETS];
|
|
|
|
struct usb_anchor rx_submitted;
|
|
|
|
int net_count;
|
|
u32 version;
|
|
int rxinitdone;
|
|
};
|
|
|
|
struct esd_usb2_net_priv {
|
|
struct can_priv can; /* must be the first member */
|
|
|
|
atomic_t active_tx_jobs;
|
|
struct usb_anchor tx_submitted;
|
|
struct esd_tx_urb_context tx_contexts[MAX_TX_URBS];
|
|
|
|
struct esd_usb2 *usb2;
|
|
struct net_device *netdev;
|
|
int index;
|
|
u8 old_state;
|
|
struct can_berr_counter bec;
|
|
};
|
|
|
|
static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
|
|
struct esd_usb2_msg *msg)
|
|
{
|
|
struct net_device_stats *stats = &priv->netdev->stats;
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
u32 id = le32_to_cpu(msg->msg.rx.id) & ESD_IDMASK;
|
|
|
|
if (id == ESD_EV_CAN_ERROR_EXT) {
|
|
u8 state = msg->msg.rx.data[0];
|
|
u8 ecc = msg->msg.rx.data[1];
|
|
u8 txerr = msg->msg.rx.data[2];
|
|
u8 rxerr = msg->msg.rx.data[3];
|
|
|
|
skb = alloc_can_err_skb(priv->netdev, &cf);
|
|
if (skb == NULL) {
|
|
stats->rx_dropped++;
|
|
return;
|
|
}
|
|
|
|
if (state != priv->old_state) {
|
|
priv->old_state = state;
|
|
|
|
switch (state & ESD_BUSSTATE_MASK) {
|
|
case ESD_BUSSTATE_BUSOFF:
|
|
priv->can.state = CAN_STATE_BUS_OFF;
|
|
cf->can_id |= CAN_ERR_BUSOFF;
|
|
priv->can.can_stats.bus_off++;
|
|
can_bus_off(priv->netdev);
|
|
break;
|
|
case ESD_BUSSTATE_WARN:
|
|
priv->can.state = CAN_STATE_ERROR_WARNING;
|
|
priv->can.can_stats.error_warning++;
|
|
break;
|
|
case ESD_BUSSTATE_ERRPASSIVE:
|
|
priv->can.state = CAN_STATE_ERROR_PASSIVE;
|
|
priv->can.can_stats.error_passive++;
|
|
break;
|
|
default:
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
break;
|
|
}
|
|
} else {
|
|
priv->can.can_stats.bus_error++;
|
|
stats->rx_errors++;
|
|
|
|
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
|
|
|
|
switch (ecc & SJA1000_ECC_MASK) {
|
|
case SJA1000_ECC_BIT:
|
|
cf->data[2] |= CAN_ERR_PROT_BIT;
|
|
break;
|
|
case SJA1000_ECC_FORM:
|
|
cf->data[2] |= CAN_ERR_PROT_FORM;
|
|
break;
|
|
case SJA1000_ECC_STUFF:
|
|
cf->data[2] |= CAN_ERR_PROT_STUFF;
|
|
break;
|
|
default:
|
|
cf->data[3] = ecc & SJA1000_ECC_SEG;
|
|
break;
|
|
}
|
|
|
|
/* Error occurred during transmission? */
|
|
if (!(ecc & SJA1000_ECC_DIR))
|
|
cf->data[2] |= CAN_ERR_PROT_TX;
|
|
|
|
if (priv->can.state == CAN_STATE_ERROR_WARNING ||
|
|
priv->can.state == CAN_STATE_ERROR_PASSIVE) {
|
|
cf->data[1] = (txerr > rxerr) ?
|
|
CAN_ERR_CRTL_TX_PASSIVE :
|
|
CAN_ERR_CRTL_RX_PASSIVE;
|
|
}
|
|
cf->data[6] = txerr;
|
|
cf->data[7] = rxerr;
|
|
}
|
|
|
|
priv->bec.txerr = txerr;
|
|
priv->bec.rxerr = rxerr;
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->len;
|
|
netif_rx(skb);
|
|
}
|
|
}
|
|
|
|
static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv *priv,
|
|
struct esd_usb2_msg *msg)
|
|
{
|
|
struct net_device_stats *stats = &priv->netdev->stats;
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
u32 id;
|
|
|
|
if (!netif_device_present(priv->netdev))
|
|
return;
|
|
|
|
id = le32_to_cpu(msg->msg.rx.id);
|
|
|
|
if (id & ESD_EVENT) {
|
|
esd_usb2_rx_event(priv, msg);
|
|
} else {
|
|
skb = alloc_can_skb(priv->netdev, &cf);
|
|
if (skb == NULL) {
|
|
stats->rx_dropped++;
|
|
return;
|
|
}
|
|
|
|
cf->can_id = id & ESD_IDMASK;
|
|
can_frame_set_cc_len(cf, msg->msg.rx.dlc & ~ESD_RTR,
|
|
priv->can.ctrlmode);
|
|
|
|
if (id & ESD_EXTID)
|
|
cf->can_id |= CAN_EFF_FLAG;
|
|
|
|
if (msg->msg.rx.dlc & ESD_RTR) {
|
|
cf->can_id |= CAN_RTR_FLAG;
|
|
} else {
|
|
for (i = 0; i < cf->len; i++)
|
|
cf->data[i] = msg->msg.rx.data[i];
|
|
}
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->len;
|
|
netif_rx(skb);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv,
|
|
struct esd_usb2_msg *msg)
|
|
{
|
|
struct net_device_stats *stats = &priv->netdev->stats;
|
|
struct net_device *netdev = priv->netdev;
|
|
struct esd_tx_urb_context *context;
|
|
|
|
if (!netif_device_present(netdev))
|
|
return;
|
|
|
|
context = &priv->tx_contexts[msg->msg.txdone.hnd & (MAX_TX_URBS - 1)];
|
|
|
|
if (!msg->msg.txdone.status) {
|
|
stats->tx_packets++;
|
|
stats->tx_bytes += context->len;
|
|
can_get_echo_skb(netdev, context->echo_index, NULL);
|
|
} else {
|
|
stats->tx_errors++;
|
|
can_free_echo_skb(netdev, context->echo_index);
|
|
}
|
|
|
|
/* Release context */
|
|
context->echo_index = MAX_TX_URBS;
|
|
atomic_dec(&priv->active_tx_jobs);
|
|
|
|
netif_wake_queue(netdev);
|
|
}
|
|
|
|
static void esd_usb2_read_bulk_callback(struct urb *urb)
|
|
{
|
|
struct esd_usb2 *dev = urb->context;
|
|
int retval;
|
|
int pos = 0;
|
|
int i;
|
|
|
|
switch (urb->status) {
|
|
case 0: /* success */
|
|
break;
|
|
|
|
case -ENOENT:
|
|
case -EPIPE:
|
|
case -EPROTO:
|
|
case -ESHUTDOWN:
|
|
return;
|
|
|
|
default:
|
|
dev_info(dev->udev->dev.parent,
|
|
"Rx URB aborted (%d)\n", urb->status);
|
|
goto resubmit_urb;
|
|
}
|
|
|
|
while (pos < urb->actual_length) {
|
|
struct esd_usb2_msg *msg;
|
|
|
|
msg = (struct esd_usb2_msg *)(urb->transfer_buffer + pos);
|
|
|
|
switch (msg->msg.hdr.cmd) {
|
|
case CMD_CAN_RX:
|
|
if (msg->msg.rx.net >= dev->net_count) {
|
|
dev_err(dev->udev->dev.parent, "format error\n");
|
|
break;
|
|
}
|
|
|
|
esd_usb2_rx_can_msg(dev->nets[msg->msg.rx.net], msg);
|
|
break;
|
|
|
|
case CMD_CAN_TX:
|
|
if (msg->msg.txdone.net >= dev->net_count) {
|
|
dev_err(dev->udev->dev.parent, "format error\n");
|
|
break;
|
|
}
|
|
|
|
esd_usb2_tx_done_msg(dev->nets[msg->msg.txdone.net],
|
|
msg);
|
|
break;
|
|
}
|
|
|
|
pos += msg->msg.hdr.len << 2;
|
|
|
|
if (pos > urb->actual_length) {
|
|
dev_err(dev->udev->dev.parent, "format error\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
resubmit_urb:
|
|
usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
|
|
urb->transfer_buffer, RX_BUFFER_SIZE,
|
|
esd_usb2_read_bulk_callback, dev);
|
|
|
|
retval = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (retval == -ENODEV) {
|
|
for (i = 0; i < dev->net_count; i++) {
|
|
if (dev->nets[i])
|
|
netif_device_detach(dev->nets[i]->netdev);
|
|
}
|
|
} else if (retval) {
|
|
dev_err(dev->udev->dev.parent,
|
|
"failed resubmitting read bulk urb: %d\n", retval);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* callback for bulk IN urb
|
|
*/
|
|
static void esd_usb2_write_bulk_callback(struct urb *urb)
|
|
{
|
|
struct esd_tx_urb_context *context = urb->context;
|
|
struct esd_usb2_net_priv *priv;
|
|
struct net_device *netdev;
|
|
size_t size = sizeof(struct esd_usb2_msg);
|
|
|
|
WARN_ON(!context);
|
|
|
|
priv = context->priv;
|
|
netdev = priv->netdev;
|
|
|
|
/* free up our allocated buffer */
|
|
usb_free_coherent(urb->dev, size,
|
|
urb->transfer_buffer, urb->transfer_dma);
|
|
|
|
if (!netif_device_present(netdev))
|
|
return;
|
|
|
|
if (urb->status)
|
|
netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status);
|
|
|
|
netif_trans_update(netdev);
|
|
}
|
|
|
|
static ssize_t show_firmware(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct usb_interface *intf = to_usb_interface(d);
|
|
struct esd_usb2 *dev = usb_get_intfdata(intf);
|
|
|
|
return sprintf(buf, "%d.%d.%d\n",
|
|
(dev->version >> 12) & 0xf,
|
|
(dev->version >> 8) & 0xf,
|
|
dev->version & 0xff);
|
|
}
|
|
static DEVICE_ATTR(firmware, 0444, show_firmware, NULL);
|
|
|
|
static ssize_t show_hardware(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct usb_interface *intf = to_usb_interface(d);
|
|
struct esd_usb2 *dev = usb_get_intfdata(intf);
|
|
|
|
return sprintf(buf, "%d.%d.%d\n",
|
|
(dev->version >> 28) & 0xf,
|
|
(dev->version >> 24) & 0xf,
|
|
(dev->version >> 16) & 0xff);
|
|
}
|
|
static DEVICE_ATTR(hardware, 0444, show_hardware, NULL);
|
|
|
|
static ssize_t show_nets(struct device *d,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct usb_interface *intf = to_usb_interface(d);
|
|
struct esd_usb2 *dev = usb_get_intfdata(intf);
|
|
|
|
return sprintf(buf, "%d", dev->net_count);
|
|
}
|
|
static DEVICE_ATTR(nets, 0444, show_nets, NULL);
|
|
|
|
static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg)
|
|
{
|
|
int actual_length;
|
|
|
|
return usb_bulk_msg(dev->udev,
|
|
usb_sndbulkpipe(dev->udev, 2),
|
|
msg,
|
|
msg->msg.hdr.len << 2,
|
|
&actual_length,
|
|
1000);
|
|
}
|
|
|
|
static int esd_usb2_wait_msg(struct esd_usb2 *dev,
|
|
struct esd_usb2_msg *msg)
|
|
{
|
|
int actual_length;
|
|
|
|
return usb_bulk_msg(dev->udev,
|
|
usb_rcvbulkpipe(dev->udev, 1),
|
|
msg,
|
|
sizeof(*msg),
|
|
&actual_length,
|
|
1000);
|
|
}
|
|
|
|
static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev)
|
|
{
|
|
int i, err = 0;
|
|
|
|
if (dev->rxinitdone)
|
|
return 0;
|
|
|
|
for (i = 0; i < MAX_RX_URBS; i++) {
|
|
struct urb *urb = NULL;
|
|
u8 *buf = NULL;
|
|
|
|
/* create a URB, and a buffer for it */
|
|
urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!urb) {
|
|
err = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
|
|
&urb->transfer_dma);
|
|
if (!buf) {
|
|
dev_warn(dev->udev->dev.parent,
|
|
"No memory left for USB buffer\n");
|
|
err = -ENOMEM;
|
|
goto freeurb;
|
|
}
|
|
|
|
usb_fill_bulk_urb(urb, dev->udev,
|
|
usb_rcvbulkpipe(dev->udev, 1),
|
|
buf, RX_BUFFER_SIZE,
|
|
esd_usb2_read_bulk_callback, dev);
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
usb_anchor_urb(urb, &dev->rx_submitted);
|
|
|
|
err = usb_submit_urb(urb, GFP_KERNEL);
|
|
if (err) {
|
|
usb_unanchor_urb(urb);
|
|
usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf,
|
|
urb->transfer_dma);
|
|
}
|
|
|
|
freeurb:
|
|
/* Drop reference, USB core will take care of freeing it */
|
|
usb_free_urb(urb);
|
|
if (err)
|
|
break;
|
|
}
|
|
|
|
/* Did we submit any URBs */
|
|
if (i == 0) {
|
|
dev_err(dev->udev->dev.parent, "couldn't setup read URBs\n");
|
|
return err;
|
|
}
|
|
|
|
/* Warn if we've couldn't transmit all the URBs */
|
|
if (i < MAX_RX_URBS) {
|
|
dev_warn(dev->udev->dev.parent,
|
|
"rx performance may be slow\n");
|
|
}
|
|
|
|
dev->rxinitdone = 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Start interface
|
|
*/
|
|
static int esd_usb2_start(struct esd_usb2_net_priv *priv)
|
|
{
|
|
struct esd_usb2 *dev = priv->usb2;
|
|
struct net_device *netdev = priv->netdev;
|
|
struct esd_usb2_msg *msg;
|
|
int err, i;
|
|
|
|
msg = kmalloc(sizeof(*msg), GFP_KERNEL);
|
|
if (!msg) {
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Enable all IDs
|
|
* The IDADD message takes up to 64 32 bit bitmasks (2048 bits).
|
|
* Each bit represents one 11 bit CAN identifier. A set bit
|
|
* enables reception of the corresponding CAN identifier. A cleared
|
|
* bit disabled this identifier. An additional bitmask value
|
|
* following the CAN 2.0A bits is used to enable reception of
|
|
* extended CAN frames. Only the LSB of this final mask is checked
|
|
* for the complete 29 bit ID range. The IDADD message also allows
|
|
* filter configuration for an ID subset. In this case you can add
|
|
* the number of the starting bitmask (0..64) to the filter.option
|
|
* field followed by only some bitmasks.
|
|
*/
|
|
msg->msg.hdr.cmd = CMD_IDADD;
|
|
msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT;
|
|
msg->msg.filter.net = priv->index;
|
|
msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */
|
|
for (i = 0; i < ESD_MAX_ID_SEGMENT; i++)
|
|
msg->msg.filter.mask[i] = cpu_to_le32(0xffffffff);
|
|
/* enable 29bit extended IDs */
|
|
msg->msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001);
|
|
|
|
err = esd_usb2_send_msg(dev, msg);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = esd_usb2_setup_rx_urbs(dev);
|
|
if (err)
|
|
goto out;
|
|
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
|
|
out:
|
|
if (err == -ENODEV)
|
|
netif_device_detach(netdev);
|
|
if (err)
|
|
netdev_err(netdev, "couldn't start device: %d\n", err);
|
|
|
|
kfree(msg);
|
|
return err;
|
|
}
|
|
|
|
static void unlink_all_urbs(struct esd_usb2 *dev)
|
|
{
|
|
struct esd_usb2_net_priv *priv;
|
|
int i, j;
|
|
|
|
usb_kill_anchored_urbs(&dev->rx_submitted);
|
|
for (i = 0; i < dev->net_count; i++) {
|
|
priv = dev->nets[i];
|
|
if (priv) {
|
|
usb_kill_anchored_urbs(&priv->tx_submitted);
|
|
atomic_set(&priv->active_tx_jobs, 0);
|
|
|
|
for (j = 0; j < MAX_TX_URBS; j++)
|
|
priv->tx_contexts[j].echo_index = MAX_TX_URBS;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int esd_usb2_open(struct net_device *netdev)
|
|
{
|
|
struct esd_usb2_net_priv *priv = netdev_priv(netdev);
|
|
int err;
|
|
|
|
/* common open */
|
|
err = open_candev(netdev);
|
|
if (err)
|
|
return err;
|
|
|
|
/* finally start device */
|
|
err = esd_usb2_start(priv);
|
|
if (err) {
|
|
netdev_warn(netdev, "couldn't start device: %d\n", err);
|
|
close_candev(netdev);
|
|
return err;
|
|
}
|
|
|
|
netif_start_queue(netdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb,
|
|
struct net_device *netdev)
|
|
{
|
|
struct esd_usb2_net_priv *priv = netdev_priv(netdev);
|
|
struct esd_usb2 *dev = priv->usb2;
|
|
struct esd_tx_urb_context *context = NULL;
|
|
struct net_device_stats *stats = &netdev->stats;
|
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
|
struct esd_usb2_msg *msg;
|
|
struct urb *urb;
|
|
u8 *buf;
|
|
int i, err;
|
|
int ret = NETDEV_TX_OK;
|
|
size_t size = sizeof(struct esd_usb2_msg);
|
|
|
|
if (can_dropped_invalid_skb(netdev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
/* create a URB, and a buffer for it, and copy the data to the URB */
|
|
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!urb) {
|
|
stats->tx_dropped++;
|
|
dev_kfree_skb(skb);
|
|
goto nourbmem;
|
|
}
|
|
|
|
buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC,
|
|
&urb->transfer_dma);
|
|
if (!buf) {
|
|
netdev_err(netdev, "No memory left for USB buffer\n");
|
|
stats->tx_dropped++;
|
|
dev_kfree_skb(skb);
|
|
goto nobufmem;
|
|
}
|
|
|
|
msg = (struct esd_usb2_msg *)buf;
|
|
|
|
msg->msg.hdr.len = 3; /* minimal length */
|
|
msg->msg.hdr.cmd = CMD_CAN_TX;
|
|
msg->msg.tx.net = priv->index;
|
|
msg->msg.tx.dlc = can_get_cc_dlc(cf, priv->can.ctrlmode);
|
|
msg->msg.tx.id = cpu_to_le32(cf->can_id & CAN_ERR_MASK);
|
|
|
|
if (cf->can_id & CAN_RTR_FLAG)
|
|
msg->msg.tx.dlc |= ESD_RTR;
|
|
|
|
if (cf->can_id & CAN_EFF_FLAG)
|
|
msg->msg.tx.id |= cpu_to_le32(ESD_EXTID);
|
|
|
|
for (i = 0; i < cf->len; i++)
|
|
msg->msg.tx.data[i] = cf->data[i];
|
|
|
|
msg->msg.hdr.len += (cf->len + 3) >> 2;
|
|
|
|
for (i = 0; i < MAX_TX_URBS; i++) {
|
|
if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) {
|
|
context = &priv->tx_contexts[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This may never happen.
|
|
*/
|
|
if (!context) {
|
|
netdev_warn(netdev, "couldn't find free context\n");
|
|
ret = NETDEV_TX_BUSY;
|
|
goto releasebuf;
|
|
}
|
|
|
|
context->priv = priv;
|
|
context->echo_index = i;
|
|
context->len = cf->len;
|
|
|
|
/* hnd must not be 0 - MSB is stripped in txdone handling */
|
|
msg->msg.tx.hnd = 0x80000000 | i; /* returned in TX done message */
|
|
|
|
usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf,
|
|
msg->msg.hdr.len << 2,
|
|
esd_usb2_write_bulk_callback, context);
|
|
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
|
|
usb_anchor_urb(urb, &priv->tx_submitted);
|
|
|
|
can_put_echo_skb(skb, netdev, context->echo_index, 0);
|
|
|
|
atomic_inc(&priv->active_tx_jobs);
|
|
|
|
/* Slow down tx path */
|
|
if (atomic_read(&priv->active_tx_jobs) >= MAX_TX_URBS)
|
|
netif_stop_queue(netdev);
|
|
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err) {
|
|
can_free_echo_skb(netdev, context->echo_index);
|
|
|
|
atomic_dec(&priv->active_tx_jobs);
|
|
usb_unanchor_urb(urb);
|
|
|
|
stats->tx_dropped++;
|
|
|
|
if (err == -ENODEV)
|
|
netif_device_detach(netdev);
|
|
else
|
|
netdev_warn(netdev, "failed tx_urb %d\n", err);
|
|
|
|
goto releasebuf;
|
|
}
|
|
|
|
netif_trans_update(netdev);
|
|
|
|
/*
|
|
* Release our reference to this URB, the USB core will eventually free
|
|
* it entirely.
|
|
*/
|
|
usb_free_urb(urb);
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
releasebuf:
|
|
usb_free_coherent(dev->udev, size, buf, urb->transfer_dma);
|
|
|
|
nobufmem:
|
|
usb_free_urb(urb);
|
|
|
|
nourbmem:
|
|
return ret;
|
|
}
|
|
|
|
static int esd_usb2_close(struct net_device *netdev)
|
|
{
|
|
struct esd_usb2_net_priv *priv = netdev_priv(netdev);
|
|
struct esd_usb2_msg *msg;
|
|
int i;
|
|
|
|
msg = kmalloc(sizeof(*msg), GFP_KERNEL);
|
|
if (!msg)
|
|
return -ENOMEM;
|
|
|
|
/* Disable all IDs (see esd_usb2_start()) */
|
|
msg->msg.hdr.cmd = CMD_IDADD;
|
|
msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT;
|
|
msg->msg.filter.net = priv->index;
|
|
msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */
|
|
for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++)
|
|
msg->msg.filter.mask[i] = 0;
|
|
if (esd_usb2_send_msg(priv->usb2, msg) < 0)
|
|
netdev_err(netdev, "sending idadd message failed\n");
|
|
|
|
/* set CAN controller to reset mode */
|
|
msg->msg.hdr.len = 2;
|
|
msg->msg.hdr.cmd = CMD_SETBAUD;
|
|
msg->msg.setbaud.net = priv->index;
|
|
msg->msg.setbaud.rsvd = 0;
|
|
msg->msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE);
|
|
if (esd_usb2_send_msg(priv->usb2, msg) < 0)
|
|
netdev_err(netdev, "sending setbaud message failed\n");
|
|
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
|
|
netif_stop_queue(netdev);
|
|
|
|
close_candev(netdev);
|
|
|
|
kfree(msg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops esd_usb2_netdev_ops = {
|
|
.ndo_open = esd_usb2_open,
|
|
.ndo_stop = esd_usb2_close,
|
|
.ndo_start_xmit = esd_usb2_start_xmit,
|
|
.ndo_change_mtu = can_change_mtu,
|
|
};
|
|
|
|
static const struct can_bittiming_const esd_usb2_bittiming_const = {
|
|
.name = "esd_usb2",
|
|
.tseg1_min = ESD_USB2_TSEG1_MIN,
|
|
.tseg1_max = ESD_USB2_TSEG1_MAX,
|
|
.tseg2_min = ESD_USB2_TSEG2_MIN,
|
|
.tseg2_max = ESD_USB2_TSEG2_MAX,
|
|
.sjw_max = ESD_USB2_SJW_MAX,
|
|
.brp_min = ESD_USB2_BRP_MIN,
|
|
.brp_max = ESD_USB2_BRP_MAX,
|
|
.brp_inc = ESD_USB2_BRP_INC,
|
|
};
|
|
|
|
static int esd_usb2_set_bittiming(struct net_device *netdev)
|
|
{
|
|
struct esd_usb2_net_priv *priv = netdev_priv(netdev);
|
|
struct can_bittiming *bt = &priv->can.bittiming;
|
|
struct esd_usb2_msg *msg;
|
|
int err;
|
|
u32 canbtr;
|
|
int sjw_shift;
|
|
|
|
canbtr = ESD_USB2_UBR;
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
|
|
canbtr |= ESD_USB2_LOM;
|
|
|
|
canbtr |= (bt->brp - 1) & (ESD_USB2_BRP_MAX - 1);
|
|
|
|
if (le16_to_cpu(priv->usb2->udev->descriptor.idProduct) ==
|
|
USB_CANUSBM_PRODUCT_ID)
|
|
sjw_shift = ESD_USBM_SJW_SHIFT;
|
|
else
|
|
sjw_shift = ESD_USB2_SJW_SHIFT;
|
|
|
|
canbtr |= ((bt->sjw - 1) & (ESD_USB2_SJW_MAX - 1))
|
|
<< sjw_shift;
|
|
canbtr |= ((bt->prop_seg + bt->phase_seg1 - 1)
|
|
& (ESD_USB2_TSEG1_MAX - 1))
|
|
<< ESD_USB2_TSEG1_SHIFT;
|
|
canbtr |= ((bt->phase_seg2 - 1) & (ESD_USB2_TSEG2_MAX - 1))
|
|
<< ESD_USB2_TSEG2_SHIFT;
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
|
|
canbtr |= ESD_USB2_3_SAMPLES;
|
|
|
|
msg = kmalloc(sizeof(*msg), GFP_KERNEL);
|
|
if (!msg)
|
|
return -ENOMEM;
|
|
|
|
msg->msg.hdr.len = 2;
|
|
msg->msg.hdr.cmd = CMD_SETBAUD;
|
|
msg->msg.setbaud.net = priv->index;
|
|
msg->msg.setbaud.rsvd = 0;
|
|
msg->msg.setbaud.baud = cpu_to_le32(canbtr);
|
|
|
|
netdev_info(netdev, "setting BTR=%#x\n", canbtr);
|
|
|
|
err = esd_usb2_send_msg(priv->usb2, msg);
|
|
|
|
kfree(msg);
|
|
return err;
|
|
}
|
|
|
|
static int esd_usb2_get_berr_counter(const struct net_device *netdev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
struct esd_usb2_net_priv *priv = netdev_priv(netdev);
|
|
|
|
bec->txerr = priv->bec.txerr;
|
|
bec->rxerr = priv->bec.rxerr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int esd_usb2_set_mode(struct net_device *netdev, enum can_mode mode)
|
|
{
|
|
switch (mode) {
|
|
case CAN_MODE_START:
|
|
netif_wake_queue(netdev);
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int esd_usb2_probe_one_net(struct usb_interface *intf, int index)
|
|
{
|
|
struct esd_usb2 *dev = usb_get_intfdata(intf);
|
|
struct net_device *netdev;
|
|
struct esd_usb2_net_priv *priv;
|
|
int err = 0;
|
|
int i;
|
|
|
|
netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS);
|
|
if (!netdev) {
|
|
dev_err(&intf->dev, "couldn't alloc candev\n");
|
|
err = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
priv = netdev_priv(netdev);
|
|
|
|
init_usb_anchor(&priv->tx_submitted);
|
|
atomic_set(&priv->active_tx_jobs, 0);
|
|
|
|
for (i = 0; i < MAX_TX_URBS; i++)
|
|
priv->tx_contexts[i].echo_index = MAX_TX_URBS;
|
|
|
|
priv->usb2 = dev;
|
|
priv->netdev = netdev;
|
|
priv->index = index;
|
|
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
priv->can.ctrlmode_supported = CAN_CTRLMODE_LISTENONLY |
|
|
CAN_CTRLMODE_CC_LEN8_DLC;
|
|
|
|
if (le16_to_cpu(dev->udev->descriptor.idProduct) ==
|
|
USB_CANUSBM_PRODUCT_ID)
|
|
priv->can.clock.freq = ESD_USBM_CAN_CLOCK;
|
|
else {
|
|
priv->can.clock.freq = ESD_USB2_CAN_CLOCK;
|
|
priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
|
|
}
|
|
|
|
priv->can.bittiming_const = &esd_usb2_bittiming_const;
|
|
priv->can.do_set_bittiming = esd_usb2_set_bittiming;
|
|
priv->can.do_set_mode = esd_usb2_set_mode;
|
|
priv->can.do_get_berr_counter = esd_usb2_get_berr_counter;
|
|
|
|
netdev->flags |= IFF_ECHO; /* we support local echo */
|
|
|
|
netdev->netdev_ops = &esd_usb2_netdev_ops;
|
|
|
|
SET_NETDEV_DEV(netdev, &intf->dev);
|
|
netdev->dev_id = index;
|
|
|
|
err = register_candev(netdev);
|
|
if (err) {
|
|
dev_err(&intf->dev, "couldn't register CAN device: %d\n", err);
|
|
free_candev(netdev);
|
|
err = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
dev->nets[index] = priv;
|
|
netdev_info(netdev, "device %s registered\n", netdev->name);
|
|
|
|
done:
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* probe function for new USB2 devices
|
|
*
|
|
* check version information and number of available
|
|
* CAN interfaces
|
|
*/
|
|
static int esd_usb2_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct esd_usb2 *dev;
|
|
struct esd_usb2_msg *msg;
|
|
int i, err;
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
err = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
dev->udev = interface_to_usbdev(intf);
|
|
|
|
init_usb_anchor(&dev->rx_submitted);
|
|
|
|
usb_set_intfdata(intf, dev);
|
|
|
|
msg = kmalloc(sizeof(*msg), GFP_KERNEL);
|
|
if (!msg) {
|
|
err = -ENOMEM;
|
|
goto free_msg;
|
|
}
|
|
|
|
/* query number of CAN interfaces (nets) */
|
|
msg->msg.hdr.cmd = CMD_VERSION;
|
|
msg->msg.hdr.len = 2;
|
|
msg->msg.version.rsvd = 0;
|
|
msg->msg.version.flags = 0;
|
|
msg->msg.version.drv_version = 0;
|
|
|
|
err = esd_usb2_send_msg(dev, msg);
|
|
if (err < 0) {
|
|
dev_err(&intf->dev, "sending version message failed\n");
|
|
goto free_msg;
|
|
}
|
|
|
|
err = esd_usb2_wait_msg(dev, msg);
|
|
if (err < 0) {
|
|
dev_err(&intf->dev, "no version message answer\n");
|
|
goto free_msg;
|
|
}
|
|
|
|
dev->net_count = (int)msg->msg.version_reply.nets;
|
|
dev->version = le32_to_cpu(msg->msg.version_reply.version);
|
|
|
|
if (device_create_file(&intf->dev, &dev_attr_firmware))
|
|
dev_err(&intf->dev,
|
|
"Couldn't create device file for firmware\n");
|
|
|
|
if (device_create_file(&intf->dev, &dev_attr_hardware))
|
|
dev_err(&intf->dev,
|
|
"Couldn't create device file for hardware\n");
|
|
|
|
if (device_create_file(&intf->dev, &dev_attr_nets))
|
|
dev_err(&intf->dev,
|
|
"Couldn't create device file for nets\n");
|
|
|
|
/* do per device probing */
|
|
for (i = 0; i < dev->net_count; i++)
|
|
esd_usb2_probe_one_net(intf, i);
|
|
|
|
free_msg:
|
|
kfree(msg);
|
|
if (err)
|
|
kfree(dev);
|
|
done:
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* called by the usb core when the device is removed from the system
|
|
*/
|
|
static void esd_usb2_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct esd_usb2 *dev = usb_get_intfdata(intf);
|
|
struct net_device *netdev;
|
|
int i;
|
|
|
|
device_remove_file(&intf->dev, &dev_attr_firmware);
|
|
device_remove_file(&intf->dev, &dev_attr_hardware);
|
|
device_remove_file(&intf->dev, &dev_attr_nets);
|
|
|
|
usb_set_intfdata(intf, NULL);
|
|
|
|
if (dev) {
|
|
for (i = 0; i < dev->net_count; i++) {
|
|
if (dev->nets[i]) {
|
|
netdev = dev->nets[i]->netdev;
|
|
unregister_netdev(netdev);
|
|
free_candev(netdev);
|
|
}
|
|
}
|
|
unlink_all_urbs(dev);
|
|
kfree(dev);
|
|
}
|
|
}
|
|
|
|
/* usb specific object needed to register this driver with the usb subsystem */
|
|
static struct usb_driver esd_usb2_driver = {
|
|
.name = "esd_usb2",
|
|
.probe = esd_usb2_probe,
|
|
.disconnect = esd_usb2_disconnect,
|
|
.id_table = esd_usb2_table,
|
|
};
|
|
|
|
module_usb_driver(esd_usb2_driver);
|