linux/include/linux/micrel_phy.h
Sascha Hauer 1fadee0c36 net/phy: micrel: Add clock support for KSZ8021/KSZ8031
The KSZ8021 and KSZ8031 support RMII reference input clocks of 25MHz
and 50MHz. Both PHYs differ in the default frequency they expect
after reset. If this differs from the actual input clock, then
register 0x1f bit 7 must be changed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-10 15:35:13 -04:00

48 lines
1.4 KiB
C

/*
* include/linux/micrel_phy.h
*
* Micrel PHY IDs
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef _MICREL_PHY_H
#define _MICREL_PHY_H
#define MICREL_PHY_ID_MASK 0x00fffff0
#define PHY_ID_KSZ8873MLL 0x000e7237
#define PHY_ID_KSZ9021 0x00221610
#define PHY_ID_KSZ9021RLRN 0x00221611
#define PHY_ID_KS8737 0x00221720
#define PHY_ID_KSZ8021 0x00221555
#define PHY_ID_KSZ8031 0x00221556
#define PHY_ID_KSZ8041 0x00221510
/* undocumented */
#define PHY_ID_KSZ8041RNLI 0x00221537
#define PHY_ID_KSZ8051 0x00221550
/* same id: ks8001 Rev. A/B, and ks8721 Rev 3. */
#define PHY_ID_KSZ8001 0x0022161A
/* same id: KS8081, KS8091 */
#define PHY_ID_KSZ8081 0x00221560
#define PHY_ID_KSZ8061 0x00221570
#define PHY_ID_KSZ9031 0x00221620
#define PHY_ID_KSZ886X 0x00221430
#define PHY_ID_KSZ8863 0x00221435
/* struct phy_device dev_flags definitions */
#define MICREL_PHY_50MHZ_CLK 0x00000001
#define MICREL_PHY_25MHZ_CLK 0x00000002
#define MICREL_KSZ9021_EXTREG_CTRL 0xB
#define MICREL_KSZ9021_EXTREG_DATA_WRITE 0xC
#define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW 0x104
#define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW 0x105
#endif /* _MICREL_PHY_H */