linux/arch/arm/plat-samsung/include/plat/gpio-core.h
Kukjin Kim 782d8a3c0b ARM: SAMSUNG: Update the name of regarding Samsung GPIO
According to gpio-samsung.c, this patch updates the name of
regarding Samsung GPIO. Basically the samsung_xxx prefix is
used in gpio-samsung.c instead of s3c_xxx, because unified
name can reduce its complexity.

Note: some s3c_xxx stil remains because it is used widely.
It will be updated next time.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-21 15:07:04 +09:00

125 lines
3.9 KiB
C

/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
*
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C Platform - GPIO core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define GPIOCON_OFF (0x00)
#define GPIODAT_OFF (0x04)
#define con_4bit_shift(__off) ((__off) * 4)
/* Define the core gpiolib support functions that the s3c platforms may
* need to extend or change depending on the hardware and the s3c chip
* selected at build or found at run time.
*
* These definitions are not intended for driver inclusion, there is
* nothing here that should not live outside the platform and core
* specific code.
*/
struct samsung_gpio_chip;
/**
* struct samsung_gpio_pm - power management (suspend/resume) information
* @save: Routine to save the state of the GPIO block
* @resume: Routine to resume the GPIO block.
*/
struct samsung_gpio_pm {
void (*save)(struct samsung_gpio_chip *chip);
void (*resume)(struct samsung_gpio_chip *chip);
};
struct samsung_gpio_cfg;
/**
* struct samsung_gpio_chip - wrapper for specific implementation of gpio
* @chip: The chip structure to be exported via gpiolib.
* @base: The base pointer to the gpio configuration registers.
* @group: The group register number for gpio interrupt support.
* @irq_base: The base irq number.
* @config: special function and pull-resistor control information.
* @lock: Lock for exclusive access to this gpio bank.
* @pm_save: Save information for suspend/resume support.
*
* This wrapper provides the necessary information for the Samsung
* specific gpios being registered with gpiolib.
*
* The lock protects each gpio bank from multiple access of the shared
* configuration registers, or from reading of data whilst another thread
* is writing to the register set.
*
* Each chip has its own lock to avoid any contention between different
* CPU cores trying to get one lock for different GPIO banks, where each
* bank of GPIO has its own register space and configuration registers.
*/
struct samsung_gpio_chip {
struct gpio_chip chip;
struct samsung_gpio_cfg *config;
struct samsung_gpio_pm *pm;
void __iomem *base;
int irq_base;
int group;
spinlock_t lock;
#ifdef CONFIG_PM
u32 pm_save[4];
#endif
};
static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
{
return container_of(gpc, struct samsung_gpio_chip, chip);
}
/**
* samsung_gpiolib_to_irq - convert gpio pin to irq number
* @chip: The gpio chip that the pin belongs to.
* @offset: The offset of the pin in the chip.
*
* This helper returns the irq number calculated from the chip->irq_base and
* the provided offset.
*/
extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
/* exported for core SoC support to change */
extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
#ifdef CONFIG_S3C_GPIO_TRACK
extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
{
return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
}
#else
/* machine specific code should provide samsung_gpiolib_getchip */
#include <mach/gpio-track.h>
static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
#endif
#ifdef CONFIG_PM
extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
#define __gpio_pm(x) x
#else
#define samsung_gpio_pm_1bit NULL
#define samsung_gpio_pm_2bit NULL
#define samsung_gpio_pm_4bit NULL
#define __gpio_pm(x) NULL
#endif /* CONFIG_PM */
/* locking wrappers to deal with multiple access to the same gpio bank */
#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)