linux/drivers/iio
Marcin Malagowski 9ecca12edd iio: pressure: Add driver for Honeywell ABP family
This patch adds minimal driver for the Honeywell Amplified Basic
Pressure sensors series. Sensors are pretty simple but are
available in many variants:
- psi/mbar/kPa output,
- analog/i2c/spi,
- gage/differential measurement,
- different measure ranges etc.

Refer to datasheets for more details:
http://sensing.honeywell.com/honeywell-sensing-basic-board-mount-pressure-sensors-abp-series-datasheet-323005128-c-en.pdf
http://sensing.honeywell.com/index.php%3Fci_id%3D45841

Driver internals:
- i2c only. measure request is done by the SMBUS QUICK cmd, so if the i2c
  bus doesn't support it, it is required to send a dummy byte to trigger
  measurement,
- since iio sysfs expects kilopascals, mbar-variants are treated as their
  respective kPa-s, hence i2c id-table has doubled entries in one line:
	{ "abp060mg", ABP006KG }, { "abp006kg", ABP006KG },
- psi-variants have prescaled values in config,
- no temperature reads yet.

Work remained:
- optional temperature channel,
- SPI support,
- DT binding.

Changes since v1:
- mutex is now locked in read_raw(),
- corrected error codes,
- fixed coding style issues,
- renamed few defines and functions abp -> abp060mg
(some structs left as they were to keep the sensible meaning).

Signed-off-by: Marcin Malagowski <mrc@bourne.st>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-01 15:14:37 +01:00
..
accel iio:mma8452: Use new iio_trigger_validate_own_device() helper 2016-09-27 20:32:59 +01:00
adc iio: adc: ti-adc161s626: add regulator support 2016-09-27 20:33:03 +01:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio: add resource managed triggered buffer init helpers 2016-09-04 15:42:46 +01:00
chemical Second set of iio new device support, features and cleanups for the 4.9 cycle. 2016-09-14 20:42:03 +02:00
common Second set of iio new device support, features and cleanups for the 4.9 cycle. 2016-09-14 20:42:03 +02:00
dac drivers: iio: dac: Fix sparse warning 2016-09-27 20:25:32 +01:00
dummy iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro iio: common: ssp_sensors: gyro: constify iio_info structures 2016-09-18 11:59:51 +01:00
health First round of IIO new device support, features and cleanups for the 4.8 cycle. 2016-06-09 09:15:58 -07:00
humidity Merge 4.8-rc5 into staging-next 2016-09-05 08:13:24 +02:00
imu Third set of IIO new device support, features and cleanups for the 4.8 cycle. 2016-07-14 12:05:29 +09:00
light drivers: iio: light: Fix sparse warnings 2016-09-27 20:33:01 +01:00
magnetometer drivers: iio: magnetometer: Fix sparse endianness warnings cast to restricted __be16 2016-09-27 21:08:45 +01:00
orientation iio: orientation: hid-sensor-rotation: Fix memory leak in probe() 2015-05-17 09:10:25 +01:00
potentiometer iio: potentiometer: Fix typo in Kconfig 2016-07-03 12:40:01 +01:00
potentiostat iio: potentiostat: add LMP91000 support 2016-09-27 20:33:03 +01:00
pressure iio: pressure: Add driver for Honeywell ABP family 2016-10-01 15:14:37 +01:00
proximity Second set of iio new device support, features and cleanups for the 4.9 cycle. 2016-09-14 20:42:03 +02:00
temperature iio: temperature: fix non static symbol warnings 2016-08-29 19:49:00 +01:00
trigger iio:trigger: Experimental kthread tight loop trigger (thread only) 2016-06-03 13:18:44 +01:00
iio_core_trigger.h
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
industrialio-buffer.c iio: Use kmalloc_array() in iio_scan_mask_set() 2016-09-24 16:35:24 +01:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c Second set of iio new device support, features and cleanups for the 4.9 cycle. 2016-09-14 20:42:03 +02:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio:trigger: Add helper function to verify that a trigger belongs to the same device 2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c iio: inkern: add iio_read_channel_offset helper 2016-09-27 20:33:02 +01:00
Kconfig iio: potentiostat: add LMP91000 support 2016-09-27 20:33:03 +01:00
Makefile iio: potentiostat: add LMP91000 support 2016-09-27 20:33:03 +01:00