linux/drivers/rtc/rtc-pl030.c
viresh kumar 9e5ed094c8 ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver
For simple modules that contain a single amba_driver without any
additional setup code then ends up being a block of duplicated
boilerplate. This patch adds a new macro, module_amba_driver(),
which replaces the module_init()/module_exit() registrations with
template functions.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-16 23:32:35 +00:00

193 lines
3.9 KiB
C

/*
* linux/drivers/rtc/rtc-pl030.c
*
* Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/io.h>
#include <linux/slab.h>
#define RTC_DR (0)
#define RTC_MR (4)
#define RTC_STAT (8)
#define RTC_EOI (8)
#define RTC_LR (12)
#define RTC_CR (16)
#define RTC_CR_MIE (1 << 0)
struct pl030_rtc {
struct rtc_device *rtc;
void __iomem *base;
};
static irqreturn_t pl030_interrupt(int irq, void *dev_id)
{
struct pl030_rtc *rtc = dev_id;
writel(0, rtc->base + RTC_EOI);
return IRQ_HANDLED;
}
static int pl030_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct pl030_rtc *rtc = dev_get_drvdata(dev);
rtc_time_to_tm(readl(rtc->base + RTC_MR), &alrm->time);
return 0;
}
static int pl030_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct pl030_rtc *rtc = dev_get_drvdata(dev);
unsigned long time;
int ret;
/*
* At the moment, we can only deal with non-wildcarded alarm times.
*/
ret = rtc_valid_tm(&alrm->time);
if (ret == 0)
ret = rtc_tm_to_time(&alrm->time, &time);
if (ret == 0)
writel(time, rtc->base + RTC_MR);
return ret;
}
static int pl030_read_time(struct device *dev, struct rtc_time *tm)
{
struct pl030_rtc *rtc = dev_get_drvdata(dev);
rtc_time_to_tm(readl(rtc->base + RTC_DR), tm);
return 0;
}
/*
* Set the RTC time. Unfortunately, we can't accurately set
* the point at which the counter updates.
*
* Also, since RTC_LR is transferred to RTC_CR on next rising
* edge of the 1Hz clock, we must write the time one second
* in advance.
*/
static int pl030_set_time(struct device *dev, struct rtc_time *tm)
{
struct pl030_rtc *rtc = dev_get_drvdata(dev);
unsigned long time;
int ret;
ret = rtc_tm_to_time(tm, &time);
if (ret == 0)
writel(time + 1, rtc->base + RTC_LR);
return ret;
}
static const struct rtc_class_ops pl030_ops = {
.read_time = pl030_read_time,
.set_time = pl030_set_time,
.read_alarm = pl030_read_alarm,
.set_alarm = pl030_set_alarm,
};
static int pl030_probe(struct amba_device *dev, const struct amba_id *id)
{
struct pl030_rtc *rtc;
int ret;
ret = amba_request_regions(dev, NULL);
if (ret)
goto err_req;
rtc = kmalloc(sizeof(*rtc), GFP_KERNEL);
if (!rtc) {
ret = -ENOMEM;
goto err_rtc;
}
rtc->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!rtc->base) {
ret = -ENOMEM;
goto err_map;
}
__raw_writel(0, rtc->base + RTC_CR);
__raw_writel(0, rtc->base + RTC_EOI);
amba_set_drvdata(dev, rtc);
ret = request_irq(dev->irq[0], pl030_interrupt, IRQF_DISABLED,
"rtc-pl030", rtc);
if (ret)
goto err_irq;
rtc->rtc = rtc_device_register("pl030", &dev->dev, &pl030_ops,
THIS_MODULE);
if (IS_ERR(rtc->rtc)) {
ret = PTR_ERR(rtc->rtc);
goto err_reg;
}
return 0;
err_reg:
free_irq(dev->irq[0], rtc);
err_irq:
iounmap(rtc->base);
err_map:
kfree(rtc);
err_rtc:
amba_release_regions(dev);
err_req:
return ret;
}
static int pl030_remove(struct amba_device *dev)
{
struct pl030_rtc *rtc = amba_get_drvdata(dev);
amba_set_drvdata(dev, NULL);
writel(0, rtc->base + RTC_CR);
free_irq(dev->irq[0], rtc);
rtc_device_unregister(rtc->rtc);
iounmap(rtc->base);
kfree(rtc);
amba_release_regions(dev);
return 0;
}
static struct amba_id pl030_ids[] = {
{
.id = 0x00041030,
.mask = 0x000fffff,
},
{ 0, 0 },
};
MODULE_DEVICE_TABLE(amba, pl030_ids);
static struct amba_driver pl030_driver = {
.drv = {
.name = "rtc-pl030",
},
.probe = pl030_probe,
.remove = pl030_remove,
.id_table = pl030_ids,
};
module_amba_driver(pl030_driver);
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("ARM AMBA PL030 RTC Driver");
MODULE_LICENSE("GPL");