mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
8cdf2d1903
SRCU:
- Introduction of the new SRCU-lite flavour with a new pair of
srcu_read_[un]lock_lite() APIs. In practice the read side using
this flavour becomes lighter by removing a full memory barrier on
LOCK and a full memory barrier on UNLOCK. This comes at the
expense of a higher latency write side with two (in the best case
of a snaphot of unused read-sides) or more RCU grace periods on
the update side which now assumes by itself the whole full
ordering guarantee against the LOCK/UNLOCK counters on both
indexes, along with the accesses performed inside.
Uretprobes is a known potential user.
Note this doesn't replace the default normal flavour of SRCU which
still behaves the same as usual.
- Add testing of SRCU-lite through rcutorture and rcuscale
- Various cleanups on the way.
FIXES:
- Allow short-circuiting RCU-TASKS-RUDE grace periods on architectures
that have sane noinstr boundaries forbidding tracing on low-level
idle and kernel entry code. RCU-TASKS is enough on such configurations
because it involves an RCU grace period that waits for all idle
tasks to either schedule out voluntarily or enter into RCU
unwatched noinstr code.
- Allow and test start_poll_synchronize_rcu() with IRQs disabled.
- Mention rcuog kthreads in relevant documentation and Kconfig help
- Various fixes and consolidations
RCUTORTURE:
- Add --no-affinity on tools to leave the affinity setting of guests
up to the user.
- Add guest_os_delay parameter to rcuscale for better warm-up
control.
- Fix and improve some rcuscale error handling.
- Various cleanups and fixes
STALL:
- Remove dead code
- Stop dumping tasks if a stalled grace period eventually ended
midway as that only produces confusing output.
- Optimize detection of stalling CPUs and avoid useless node
locking otherwise.
NOCB:
- Fix rcu_barrier() hang due to a race against callbacks
deoffloading. This is not yet used, except by rcutorture, and
waits for its promised cpusets interface.
- Remove leftover function declaration
-----BEGIN PGP SIGNATURE-----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=MWrw
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Introduction of the new SRCU-lite flavour with a new pair of
srcu_read_[un]lock_lite() APIs. In practice the read side using
this flavour becomes lighter by removing a full memory barrier on
LOCK and a full memory barrier on UNLOCK. This comes at the expense
of a higher latency write side with two (in the best case of a
snaphot of unused read-sides) or more RCU grace periods on the
update side which now assumes by itself the whole full ordering
guarantee against the LOCK/UNLOCK counters on both indexes, along
with the accesses performed inside.
Uretprobes is a known potential user.
Note this doesn't replace the default normal flavour of SRCU which
still behaves the same as usual.
- Add testing of SRCU-lite through rcutorture and rcuscale
- Various cleanups on the way.
Fixes:
- Allow short-circuiting RCU-TASKS-RUDE grace periods on
architectures that have sane noinstr boundaries forbidding tracing
on low-level idle and kernel entry code. RCU-TASKS is enough on
such configurations because it involves an RCU grace period that
waits for all idle tasks to either schedule out voluntarily or
enter into RCU unwatched noinstr code.
- Allow and test start_poll_synchronize_rcu() with IRQs disabled.
- Mention rcuog kthreads in relevant documentation and Kconfig help
- Various fixes and consolidations
rcutorture:
- Add --no-affinity on tools to leave the affinity setting of guests
up to the user.
- Add guest_os_delay parameter to rcuscale for better warm-up
control.
- Fix and improve some rcuscale error handling.
- Various cleanups and fixes
stall:
- Remove dead code
- Stop dumping tasks if a stalled grace period eventually ended
midway as that only produces confusing output.
- Optimize detection of stalling CPUs and avoid useless node locking
otherwise.
NOCB:
- Fix rcu_barrier() hang due to a race against callbacks
deoffloading. This is not yet used, except by rcutorture, and waits
for its promised cpusets interface.
- Remove leftover function declaration"
* tag 'rcu.release.v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (42 commits)
rcuscale: Remove redundant WARN_ON_ONCE() splat
rcuscale: Do a proper cleanup if kfree_scale_init() fails
srcu: Unconditionally record srcu_read_lock_lite() in ->srcu_reader_flavor
srcu: Check for srcu_read_lock_lite() across all CPUs
srcu: Remove smp_mb() from srcu_read_unlock_lite()
rcutorture: Avoid printing cpu=-1 for no-fault RCU boost failure
rcuscale: Add guest_os_delay module parameter
refscale: Correct affinity check
torture: Add --no-affinity parameter to kvm.sh
rcu/nocb: Fix missed RCU barrier on deoffloading
rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu
rcu/srcutiny: don't return before reenabling preemption
rcu-tasks: Remove open-coded one-byte cmpxchg() emulation
doc: Remove kernel-parameters.txt entry for rcutorture.read_exit
rcutorture: Test start-poll primitives with interrupts disabled
rcu: Permit start_poll_synchronize_rcu*() with interrupts disabled
rcu: Allow short-circuiting of synchronize_rcu_tasks_rude()
doc: Add rcuog kthreads to kernel-per-CPU-kthreads.rst
rcu: Add rcuog kthreads to RCU_NOCB_CPU help text
rcu: Use the BITS_PER_LONG macro
...
|
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Kconfig.debug | ||
| Makefile | ||
| rcu_segcblist.c | ||
| rcu_segcblist.h | ||
| rcu.h | ||
| rcuscale.c | ||
| rcutorture.c | ||
| refscale.c | ||
| srcutiny.c | ||
| srcutree.c | ||
| sync.c | ||
| tasks.h | ||
| tiny.c | ||
| tree_exp.h | ||
| tree_nocb.h | ||
| tree_plugin.h | ||
| tree_stall.h | ||
| tree.c | ||
| tree.h | ||
| update.c | ||