linux/net/dsa
Vladimir Oltean 9d5ef190e5 net: dsa: automatically bring up DSA master when opening user port
DSA wants the master interface to be open before the user port is due to
historical reasons. The promiscuity of interfaces that are down used to
have issues, as referenced Lennert Buytenhek in commit df02c6ff2e
("dsa: fix master interface allmulti/promisc handling").

The bugfix mentioned there, commit b6c40d68ff ("net: only invoke
dev->change_rx_flags when device is UP"), was basically a "don't do
that" approach to working around the promiscuity while down issue.

Further work done by Vlad Yasevich in commit d2615bf450 ("net: core:
Always propagate flag changes to interfaces") has resolved the
underlying issue, and it is strictly up to the DSA and 8021q drivers
now, it is no longer mandated by the networking core that the master
interface must be up when changing its promiscuity.

From DSA's point of view, deciding to error out in dsa_slave_open
because the master isn't up is
(a) a bad user experience and
(b) knocking at an open door.
Even if there still was an issue with promiscuity while down, DSA could
still just open the master and avoid it.

Doing it this way has the additional benefit that user space can now
remove DSA-specific workarounds, like systemd-networkd with BindCarrier:
https://github.com/systemd/systemd/issues/7478

And we can finally remove one of the 2 bullets in the "Common pitfalls
using DSA setups" chapter.

Tested with two cascaded DSA switches:

$ ip link set sw0p2 up
fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode
fsl_enetc 0000:00:00.2 eno2: Link is Up - 1Gbps/Full - flow control rx/tx
mscc_felix 0000:00:00.5 swp0: configuring for fixed/sgmii link mode
mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off
8021q: adding VLAN 0 to HW filter on device swp0
sja1105 spi2.0 sw0p2: configuring for phy/rgmii-id link mode
IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:42:57 -08:00
..
dsa_priv.h net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored 2021-02-03 18:25:49 -08:00
dsa.c net: dsa: allow changing the tag protocol via the "tagging" device attribute 2021-01-29 21:24:39 -08:00
dsa2.c net: dsa: allow changing the tag protocol via the "tagging" device attribute 2021-01-29 21:24:39 -08:00
Kconfig net: dsa: add a second tagger for Ocelot switches based on tag_8021q 2021-01-29 21:25:27 -08:00
Makefile net: dsa: add a second tagger for Ocelot switches based on tag_8021q 2021-01-29 21:25:27 -08:00
master.c net: dsa: allow changing the tag protocol via the "tagging" device attribute 2021-01-29 21:24:39 -08:00
port.c net: dsa: allow changing the tag protocol via the "tagging" device attribute 2021-01-29 21:24:39 -08:00
slave.c net: dsa: automatically bring up DSA master when opening user port 2021-02-06 14:42:57 -08:00
switch.c net: dsa: allow changing the tag protocol via the "tagging" device attribute 2021-01-29 21:24:39 -08:00
tag_8021q.c net: dsa: tag_8021q: add helpers to deduce whether a VLAN ID is RX or TX VLAN 2021-01-29 21:24:30 -08:00
tag_ar9331.c net: dsa: tag_ar9331: let DSA core deal with TX reallocation 2020-11-02 17:41:17 -08:00
tag_brcm.c net: dsa: move the Broadcom tag information in a separate header file 2021-01-07 15:42:07 -08:00
tag_dsa.c net: dsa: tag_dsa: Support reception of packets from LAG devices 2021-01-14 17:11:56 -08:00
tag_gswip.c net: dsa: tag_gswip: let DSA core deal with TX reallocation 2020-11-02 17:41:16 -08:00
tag_hellcreek.c net: dsa: tag_hellcreek: Cleanup includes 2020-11-23 16:57:21 -08:00
tag_ksz.c net: dsa: tag_ksz: don't allocate additional memory for padding/tagging 2020-11-02 17:41:16 -08:00
tag_lan9303.c net: dsa: tag_lan9303: let DSA core deal with TX reallocation 2020-11-02 17:41:16 -08:00
tag_mtk.c net: dsa: tag_mtk: let DSA core deal with TX reallocation 2020-11-02 17:41:16 -08:00
tag_ocelot_8021q.c net: dsa: add a second tagger for Ocelot switches based on tag_8021q 2021-01-29 21:25:27 -08:00
tag_ocelot.c net: dsa: tag_ocelot: let DSA core deal with TX reallocation 2020-11-02 17:41:16 -08:00
tag_qca.c net: dsa: tag_qca: let DSA core deal with TX reallocation 2020-11-02 17:41:16 -08:00
tag_rtl4_a.c net: dsa: tag_rtl4_a: use the generic flow dissector procedure 2020-09-26 14:17:59 -07:00
tag_sja1105.c net: dsa: tag_sja1105: use a custom flow dissector procedure 2020-09-26 14:17:59 -07:00
tag_trailer.c net: dsa: trailer: don't allocate additional memory for padding/tagging 2020-11-02 17:41:16 -08:00
tag_xrs700x.c dsa: add support for Arrow XRS700x tag trailer 2021-01-15 15:36:31 -08:00