mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 12:42:02 +00:00
c79a8d85d7
Fix some typos in five documentations, no functional change. Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
614 lines
25 KiB
Plaintext
614 lines
25 KiB
Plaintext
Tools that manage md devices can be found at
|
|
http://www.kernel.org/pub/linux/utils/raid/
|
|
|
|
|
|
Boot time assembly of RAID arrays
|
|
---------------------------------
|
|
|
|
You can boot with your md device with the following kernel command
|
|
lines:
|
|
|
|
for old raid arrays without persistent superblocks:
|
|
md=<md device no.>,<raid level>,<chunk size factor>,<fault level>,dev0,dev1,...,devn
|
|
|
|
for raid arrays with persistent superblocks
|
|
md=<md device no.>,dev0,dev1,...,devn
|
|
or, to assemble a partitionable array:
|
|
md=d<md device no.>,dev0,dev1,...,devn
|
|
|
|
md device no. = the number of the md device ...
|
|
0 means md0,
|
|
1 md1,
|
|
2 md2,
|
|
3 md3,
|
|
4 md4
|
|
|
|
raid level = -1 linear mode
|
|
0 striped mode
|
|
other modes are only supported with persistent super blocks
|
|
|
|
chunk size factor = (raid-0 and raid-1 only)
|
|
Set the chunk size as 4k << n.
|
|
|
|
fault level = totally ignored
|
|
|
|
dev0-devn: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
|
|
|
|
A possible loadlin line (Harald Hoyer <HarryH@Royal.Net>) looks like this:
|
|
|
|
e:\loadlin\loadlin e:\zimage root=/dev/md0 md=0,0,4,0,/dev/hdb2,/dev/hdc3 ro
|
|
|
|
|
|
Boot time autodetection of RAID arrays
|
|
--------------------------------------
|
|
|
|
When md is compiled into the kernel (not as module), partitions of
|
|
type 0xfd are scanned and automatically assembled into RAID arrays.
|
|
This autodetection may be suppressed with the kernel parameter
|
|
"raid=noautodetect". As of kernel 2.6.9, only drives with a type 0
|
|
superblock can be autodetected and run at boot time.
|
|
|
|
The kernel parameter "raid=partitionable" (or "raid=part") means
|
|
that all auto-detected arrays are assembled as partitionable.
|
|
|
|
Boot time assembly of degraded/dirty arrays
|
|
-------------------------------------------
|
|
|
|
If a raid5 or raid6 array is both dirty and degraded, it could have
|
|
undetectable data corruption. This is because the fact that it is
|
|
'dirty' means that the parity cannot be trusted, and the fact that it
|
|
is degraded means that some datablocks are missing and cannot reliably
|
|
be reconstructed (due to no parity).
|
|
|
|
For this reason, md will normally refuse to start such an array. This
|
|
requires the sysadmin to take action to explicitly start the array
|
|
despite possible corruption. This is normally done with
|
|
mdadm --assemble --force ....
|
|
|
|
This option is not really available if the array has the root
|
|
filesystem on it. In order to support this booting from such an
|
|
array, md supports a module parameter "start_dirty_degraded" which,
|
|
when set to 1, bypassed the checks and will allows dirty degraded
|
|
arrays to be started.
|
|
|
|
So, to boot with a root filesystem of a dirty degraded raid[56], use
|
|
|
|
md-mod.start_dirty_degraded=1
|
|
|
|
|
|
Superblock formats
|
|
------------------
|
|
|
|
The md driver can support a variety of different superblock formats.
|
|
Currently, it supports superblock formats "0.90.0" and the "md-1" format
|
|
introduced in the 2.5 development series.
|
|
|
|
The kernel will autodetect which format superblock is being used.
|
|
|
|
Superblock format '0' is treated differently to others for legacy
|
|
reasons - it is the original superblock format.
|
|
|
|
|
|
General Rules - apply for all superblock formats
|
|
------------------------------------------------
|
|
|
|
An array is 'created' by writing appropriate superblocks to all
|
|
devices.
|
|
|
|
It is 'assembled' by associating each of these devices with an
|
|
particular md virtual device. Once it is completely assembled, it can
|
|
be accessed.
|
|
|
|
An array should be created by a user-space tool. This will write
|
|
superblocks to all devices. It will usually mark the array as
|
|
'unclean', or with some devices missing so that the kernel md driver
|
|
can create appropriate redundancy (copying in raid1, parity
|
|
calculation in raid4/5).
|
|
|
|
When an array is assembled, it is first initialized with the
|
|
SET_ARRAY_INFO ioctl. This contains, in particular, a major and minor
|
|
version number. The major version number selects which superblock
|
|
format is to be used. The minor number might be used to tune handling
|
|
of the format, such as suggesting where on each device to look for the
|
|
superblock.
|
|
|
|
Then each device is added using the ADD_NEW_DISK ioctl. This
|
|
provides, in particular, a major and minor number identifying the
|
|
device to add.
|
|
|
|
The array is started with the RUN_ARRAY ioctl.
|
|
|
|
Once started, new devices can be added. They should have an
|
|
appropriate superblock written to them, and then be passed in with
|
|
ADD_NEW_DISK.
|
|
|
|
Devices that have failed or are not yet active can be detached from an
|
|
array using HOT_REMOVE_DISK.
|
|
|
|
|
|
Specific Rules that apply to format-0 super block arrays, and
|
|
arrays with no superblock (non-persistent).
|
|
-------------------------------------------------------------
|
|
|
|
An array can be 'created' by describing the array (level, chunksize
|
|
etc) in a SET_ARRAY_INFO ioctl. This must have major_version==0 and
|
|
raid_disks != 0.
|
|
|
|
Then uninitialized devices can be added with ADD_NEW_DISK. The
|
|
structure passed to ADD_NEW_DISK must specify the state of the device
|
|
and its role in the array.
|
|
|
|
Once started with RUN_ARRAY, uninitialized spares can be added with
|
|
HOT_ADD_DISK.
|
|
|
|
|
|
|
|
MD devices in sysfs
|
|
-------------------
|
|
md devices appear in sysfs (/sys) as regular block devices,
|
|
e.g.
|
|
/sys/block/md0
|
|
|
|
Each 'md' device will contain a subdirectory called 'md' which
|
|
contains further md-specific information about the device.
|
|
|
|
All md devices contain:
|
|
level
|
|
a text file indicating the 'raid level'. e.g. raid0, raid1,
|
|
raid5, linear, multipath, faulty.
|
|
If no raid level has been set yet (array is still being
|
|
assembled), the value will reflect whatever has been written
|
|
to it, which may be a name like the above, or may be a number
|
|
such as '0', '5', etc.
|
|
|
|
raid_disks
|
|
a text file with a simple number indicating the number of devices
|
|
in a fully functional array. If this is not yet known, the file
|
|
will be empty. If an array is being resized this will contain
|
|
the new number of devices.
|
|
Some raid levels allow this value to be set while the array is
|
|
active. This will reconfigure the array. Otherwise it can only
|
|
be set while assembling an array.
|
|
A change to this attribute will not be permitted if it would
|
|
reduce the size of the array. To reduce the number of drives
|
|
in an e.g. raid5, the array size must first be reduced by
|
|
setting the 'array_size' attribute.
|
|
|
|
chunk_size
|
|
This is the size in bytes for 'chunks' and is only relevant to
|
|
raid levels that involve striping (0,4,5,6,10). The address space
|
|
of the array is conceptually divided into chunks and consecutive
|
|
chunks are striped onto neighbouring devices.
|
|
The size should be at least PAGE_SIZE (4k) and should be a power
|
|
of 2. This can only be set while assembling an array
|
|
|
|
layout
|
|
The "layout" for the array for the particular level. This is
|
|
simply a number that is interpretted differently by different
|
|
levels. It can be written while assembling an array.
|
|
|
|
array_size
|
|
This can be used to artificially constrain the available space in
|
|
the array to be less than is actually available on the combined
|
|
devices. Writing a number (in Kilobytes) which is less than
|
|
the available size will set the size. Any reconfiguration of the
|
|
array (e.g. adding devices) will not cause the size to change.
|
|
Writing the word 'default' will cause the effective size of the
|
|
array to be whatever size is actually available based on
|
|
'level', 'chunk_size' and 'component_size'.
|
|
|
|
This can be used to reduce the size of the array before reducing
|
|
the number of devices in a raid4/5/6, or to support external
|
|
metadata formats which mandate such clipping.
|
|
|
|
reshape_position
|
|
This is either "none" or a sector number within the devices of
|
|
the array where "reshape" is up to. If this is set, the three
|
|
attributes mentioned above (raid_disks, chunk_size, layout) can
|
|
potentially have 2 values, an old and a new value. If these
|
|
values differ, reading the attribute returns
|
|
new (old)
|
|
and writing will effect the 'new' value, leaving the 'old'
|
|
unchanged.
|
|
|
|
component_size
|
|
For arrays with data redundancy (i.e. not raid0, linear, faulty,
|
|
multipath), all components must be the same size - or at least
|
|
there must a size that they all provide space for. This is a key
|
|
part or the geometry of the array. It is measured in sectors
|
|
and can be read from here. Writing to this value may resize
|
|
the array if the personality supports it (raid1, raid5, raid6),
|
|
and if the component drives are large enough.
|
|
|
|
metadata_version
|
|
This indicates the format that is being used to record metadata
|
|
about the array. It can be 0.90 (traditional format), 1.0, 1.1,
|
|
1.2 (newer format in varying locations) or "none" indicating that
|
|
the kernel isn't managing metadata at all.
|
|
Alternately it can be "external:" followed by a string which
|
|
is set by user-space. This indicates that metadata is managed
|
|
by a user-space program. Any device failure or other event that
|
|
requires a metadata update will cause array activity to be
|
|
suspended until the event is acknowledged.
|
|
|
|
resync_start
|
|
The point at which resync should start. If no resync is needed,
|
|
this will be a very large number (or 'none' since 2.6.30-rc1). At
|
|
array creation it will default to 0, though starting the array as
|
|
'clean' will set it much larger.
|
|
|
|
new_dev
|
|
This file can be written but not read. The value written should
|
|
be a block device number as major:minor. e.g. 8:0
|
|
This will cause that device to be attached to the array, if it is
|
|
available. It will then appear at md/dev-XXX (depending on the
|
|
name of the device) and further configuration is then possible.
|
|
|
|
safe_mode_delay
|
|
When an md array has seen no write requests for a certain period
|
|
of time, it will be marked as 'clean'. When another write
|
|
request arrives, the array is marked as 'dirty' before the write
|
|
commences. This is known as 'safe_mode'.
|
|
The 'certain period' is controlled by this file which stores the
|
|
period as a number of seconds. The default is 200msec (0.200).
|
|
Writing a value of 0 disables safemode.
|
|
|
|
array_state
|
|
This file contains a single word which describes the current
|
|
state of the array. In many cases, the state can be set by
|
|
writing the word for the desired state, however some states
|
|
cannot be explicitly set, and some transitions are not allowed.
|
|
|
|
Select/poll works on this file. All changes except between
|
|
active_idle and active (which can be frequent and are not
|
|
very interesting) are notified. active->active_idle is
|
|
reported if the metadata is externally managed.
|
|
|
|
clear
|
|
No devices, no size, no level
|
|
Writing is equivalent to STOP_ARRAY ioctl
|
|
inactive
|
|
May have some settings, but array is not active
|
|
all IO results in error
|
|
When written, doesn't tear down array, but just stops it
|
|
suspended (not supported yet)
|
|
All IO requests will block. The array can be reconfigured.
|
|
Writing this, if accepted, will block until array is quiessent
|
|
readonly
|
|
no resync can happen. no superblocks get written.
|
|
write requests fail
|
|
read-auto
|
|
like readonly, but behaves like 'clean' on a write request.
|
|
|
|
clean - no pending writes, but otherwise active.
|
|
When written to inactive array, starts without resync
|
|
If a write request arrives then
|
|
if metadata is known, mark 'dirty' and switch to 'active'.
|
|
if not known, block and switch to write-pending
|
|
If written to an active array that has pending writes, then fails.
|
|
active
|
|
fully active: IO and resync can be happening.
|
|
When written to inactive array, starts with resync
|
|
|
|
write-pending
|
|
clean, but writes are blocked waiting for 'active' to be written.
|
|
|
|
active-idle
|
|
like active, but no writes have been seen for a while (safe_mode_delay).
|
|
|
|
bitmap/location
|
|
This indicates where the write-intent bitmap for the array is
|
|
stored.
|
|
It can be one of "none", "file" or "[+-]N".
|
|
"file" may later be extended to "file:/file/name"
|
|
"[+-]N" means that many sectors from the start of the metadata.
|
|
This is replicated on all devices. For arrays with externally
|
|
managed metadata, the offset is from the beginning of the
|
|
device.
|
|
bitmap/chunksize
|
|
The size, in bytes, of the chunk which will be represented by a
|
|
single bit. For RAID456, it is a portion of an individual
|
|
device. For RAID10, it is a portion of the array. For RAID1, it
|
|
is both (they come to the same thing).
|
|
bitmap/time_base
|
|
The time, in seconds, between looking for bits in the bitmap to
|
|
be cleared. In the current implementation, a bit will be cleared
|
|
between 2 and 3 times "time_base" after all the covered blocks
|
|
are known to be in-sync.
|
|
bitmap/backlog
|
|
When write-mostly devices are active in a RAID1, write requests
|
|
to those devices proceed in the background - the filesystem (or
|
|
other user of the device) does not have to wait for them.
|
|
'backlog' sets a limit on the number of concurrent background
|
|
writes. If there are more than this, new writes will by
|
|
synchronous.
|
|
bitmap/metadata
|
|
This can be either 'internal' or 'external'.
|
|
'internal' is the default and means the metadata for the bitmap
|
|
is stored in the first 256 bytes of the allocated space and is
|
|
managed by the md module.
|
|
'external' means that bitmap metadata is managed externally to
|
|
the kernel (i.e. by some userspace program)
|
|
bitmap/can_clear
|
|
This is either 'true' or 'false'. If 'true', then bits in the
|
|
bitmap will be cleared when the corresponding blocks are thought
|
|
to be in-sync. If 'false', bits will never be cleared.
|
|
This is automatically set to 'false' if a write happens on a
|
|
degraded array, or if the array becomes degraded during a write.
|
|
When metadata is managed externally, it should be set to true
|
|
once the array becomes non-degraded, and this fact has been
|
|
recorded in the metadata.
|
|
|
|
|
|
|
|
|
|
As component devices are added to an md array, they appear in the 'md'
|
|
directory as new directories named
|
|
dev-XXX
|
|
where XXX is a name that the kernel knows for the device, e.g. hdb1.
|
|
Each directory contains:
|
|
|
|
block
|
|
a symlink to the block device in /sys/block, e.g.
|
|
/sys/block/md0/md/dev-hdb1/block -> ../../../../block/hdb/hdb1
|
|
|
|
super
|
|
A file containing an image of the superblock read from, or
|
|
written to, that device.
|
|
|
|
state
|
|
A file recording the current state of the device in the array
|
|
which can be a comma separated list of
|
|
faulty - device has been kicked from active use due to
|
|
a detected fault, or it has unacknowledged bad
|
|
blocks
|
|
in_sync - device is a fully in-sync member of the array
|
|
writemostly - device will only be subject to read
|
|
requests if there are no other options.
|
|
This applies only to raid1 arrays.
|
|
blocked - device has failed, and the failure hasn't been
|
|
acknowledged yet by the metadata handler.
|
|
Writes that would write to this device if
|
|
it were not faulty are blocked.
|
|
spare - device is working, but not a full member.
|
|
This includes spares that are in the process
|
|
of being recovered to
|
|
write_error - device has ever seen a write error.
|
|
want_replacement - device is (mostly) working but probably
|
|
should be replaced, either due to errors or
|
|
due to user request.
|
|
replacement - device is a replacement for another active
|
|
device with same raid_disk.
|
|
|
|
|
|
This list may grow in future.
|
|
This can be written to.
|
|
Writing "faulty" simulates a failure on the device.
|
|
Writing "remove" removes the device from the array.
|
|
Writing "writemostly" sets the writemostly flag.
|
|
Writing "-writemostly" clears the writemostly flag.
|
|
Writing "blocked" sets the "blocked" flag.
|
|
Writing "-blocked" clears the "blocked" flags and allows writes
|
|
to complete and possibly simulates an error.
|
|
Writing "in_sync" sets the in_sync flag.
|
|
Writing "write_error" sets writeerrorseen flag.
|
|
Writing "-write_error" clears writeerrorseen flag.
|
|
Writing "want_replacement" is allowed at any time except to a
|
|
replacement device or a spare. It sets the flag.
|
|
Writing "-want_replacement" is allowed at any time. It clears
|
|
the flag.
|
|
Writing "replacement" or "-replacement" is only allowed before
|
|
starting the array. It sets or clears the flag.
|
|
|
|
|
|
This file responds to select/poll. Any change to 'faulty'
|
|
or 'blocked' causes an event.
|
|
|
|
errors
|
|
An approximate count of read errors that have been detected on
|
|
this device but have not caused the device to be evicted from
|
|
the array (either because they were corrected or because they
|
|
happened while the array was read-only). When using version-1
|
|
metadata, this value persists across restarts of the array.
|
|
|
|
This value can be written while assembling an array thus
|
|
providing an ongoing count for arrays with metadata managed by
|
|
userspace.
|
|
|
|
slot
|
|
This gives the role that the device has in the array. It will
|
|
either be 'none' if the device is not active in the array
|
|
(i.e. is a spare or has failed) or an integer less than the
|
|
'raid_disks' number for the array indicating which position
|
|
it currently fills. This can only be set while assembling an
|
|
array. A device for which this is set is assumed to be working.
|
|
|
|
offset
|
|
This gives the location in the device (in sectors from the
|
|
start) where data from the array will be stored. Any part of
|
|
the device before this offset is not touched, unless it is
|
|
used for storing metadata (Formats 1.1 and 1.2).
|
|
|
|
size
|
|
The amount of the device, after the offset, that can be used
|
|
for storage of data. This will normally be the same as the
|
|
component_size. This can be written while assembling an
|
|
array. If a value less than the current component_size is
|
|
written, it will be rejected.
|
|
|
|
recovery_start
|
|
When the device is not 'in_sync', this records the number of
|
|
sectors from the start of the device which are known to be
|
|
correct. This is normally zero, but during a recovery
|
|
operation it will steadily increase, and if the recovery is
|
|
interrupted, restoring this value can cause recovery to
|
|
avoid repeating the earlier blocks. With v1.x metadata, this
|
|
value is saved and restored automatically.
|
|
|
|
This can be set whenever the device is not an active member of
|
|
the array, either before the array is activated, or before
|
|
the 'slot' is set.
|
|
|
|
Setting this to 'none' is equivalent to setting 'in_sync'.
|
|
Setting to any other value also clears the 'in_sync' flag.
|
|
|
|
bad_blocks
|
|
This gives the list of all known bad blocks in the form of
|
|
start address and length (in sectors respectively). If output
|
|
is too big to fit in a page, it will be truncated. Writing
|
|
"sector length" to this file adds new acknowledged (i.e.
|
|
recorded to disk safely) bad blocks.
|
|
|
|
unacknowledged_bad_blocks
|
|
This gives the list of known-but-not-yet-saved-to-disk bad
|
|
blocks in the same form of 'bad_blocks'. If output is too big
|
|
to fit in a page, it will be truncated. Writing to this file
|
|
adds bad blocks without acknowledging them. This is largely
|
|
for testing.
|
|
|
|
|
|
|
|
An active md device will also contain an entry for each active device
|
|
in the array. These are named
|
|
|
|
rdNN
|
|
|
|
where 'NN' is the position in the array, starting from 0.
|
|
So for a 3 drive array there will be rd0, rd1, rd2.
|
|
These are symbolic links to the appropriate 'dev-XXX' entry.
|
|
Thus, for example,
|
|
cat /sys/block/md*/md/rd*/state
|
|
will show 'in_sync' on every line.
|
|
|
|
|
|
|
|
Active md devices for levels that support data redundancy (1,4,5,6,10)
|
|
also have
|
|
|
|
sync_action
|
|
a text file that can be used to monitor and control the rebuild
|
|
process. It contains one word which can be one of:
|
|
resync - redundancy is being recalculated after unclean
|
|
shutdown or creation
|
|
recover - a hot spare is being built to replace a
|
|
failed/missing device
|
|
idle - nothing is happening
|
|
check - A full check of redundancy was requested and is
|
|
happening. This reads all blocks and checks
|
|
them. A repair may also happen for some raid
|
|
levels.
|
|
repair - A full check and repair is happening. This is
|
|
similar to 'resync', but was requested by the
|
|
user, and the write-intent bitmap is NOT used to
|
|
optimise the process.
|
|
|
|
This file is writable, and each of the strings that could be
|
|
read are meaningful for writing.
|
|
|
|
'idle' will stop an active resync/recovery etc. There is no
|
|
guarantee that another resync/recovery may not be automatically
|
|
started again, though some event will be needed to trigger
|
|
this.
|
|
'resync' or 'recovery' can be used to restart the
|
|
corresponding operation if it was stopped with 'idle'.
|
|
'check' and 'repair' will start the appropriate process
|
|
providing the current state is 'idle'.
|
|
|
|
This file responds to select/poll. Any important change in the value
|
|
triggers a poll event. Sometimes the value will briefly be
|
|
"recover" if a recovery seems to be needed, but cannot be
|
|
achieved. In that case, the transition to "recover" isn't
|
|
notified, but the transition away is.
|
|
|
|
degraded
|
|
This contains a count of the number of devices by which the
|
|
arrays is degraded. So an optimal array will show '0'. A
|
|
single failed/missing drive will show '1', etc.
|
|
This file responds to select/poll, any increase or decrease
|
|
in the count of missing devices will trigger an event.
|
|
|
|
mismatch_count
|
|
When performing 'check' and 'repair', and possibly when
|
|
performing 'resync', md will count the number of errors that are
|
|
found. The count in 'mismatch_cnt' is the number of sectors
|
|
that were re-written, or (for 'check') would have been
|
|
re-written. As most raid levels work in units of pages rather
|
|
than sectors, this may be larger than the number of actual errors
|
|
by a factor of the number of sectors in a page.
|
|
|
|
bitmap_set_bits
|
|
If the array has a write-intent bitmap, then writing to this
|
|
attribute can set bits in the bitmap, indicating that a resync
|
|
would need to check the corresponding blocks. Either individual
|
|
numbers or start-end pairs can be written. Multiple numbers
|
|
can be separated by a space.
|
|
Note that the numbers are 'bit' numbers, not 'block' numbers.
|
|
They should be scaled by the bitmap_chunksize.
|
|
|
|
sync_speed_min
|
|
sync_speed_max
|
|
This are similar to /proc/sys/dev/raid/speed_limit_{min,max}
|
|
however they only apply to the particular array.
|
|
If no value has been written to these, of if the word 'system'
|
|
is written, then the system-wide value is used. If a value,
|
|
in kibibytes-per-second is written, then it is used.
|
|
When the files are read, they show the currently active value
|
|
followed by "(local)" or "(system)" depending on whether it is
|
|
a locally set or system-wide value.
|
|
|
|
sync_completed
|
|
This shows the number of sectors that have been completed of
|
|
whatever the current sync_action is, followed by the number of
|
|
sectors in total that could need to be processed. The two
|
|
numbers are separated by a '/' thus effectively showing one
|
|
value, a fraction of the process that is complete.
|
|
A 'select' on this attribute will return when resync completes,
|
|
when it reaches the current sync_max (below) and possibly at
|
|
other times.
|
|
|
|
sync_speed
|
|
This shows the current actual speed, in K/sec, of the current
|
|
sync_action. It is averaged over the last 30 seconds.
|
|
|
|
suspend_lo
|
|
suspend_hi
|
|
The two values, given as numbers of sectors, indicate a range
|
|
within the array where IO will be blocked. This is currently
|
|
only supported for raid4/5/6.
|
|
|
|
sync_min
|
|
sync_max
|
|
The two values, given as numbers of sectors, indicate a range
|
|
within the array where 'check'/'repair' will operate. Must be
|
|
a multiple of chunk_size. When it reaches "sync_max" it will
|
|
pause, rather than complete.
|
|
You can use 'select' or 'poll' on "sync_completed" to wait for
|
|
that number to reach sync_max. Then you can either increase
|
|
"sync_max", or can write 'idle' to "sync_action".
|
|
|
|
The value of 'max' for "sync_max" effectively disables the limit.
|
|
When a resync is active, the value can only ever be increased,
|
|
never decreased.
|
|
The value of '0' is the minimum for "sync_min".
|
|
|
|
|
|
|
|
Each active md device may also have attributes specific to the
|
|
personality module that manages it.
|
|
These are specific to the implementation of the module and could
|
|
change substantially if the implementation changes.
|
|
|
|
These currently include
|
|
|
|
stripe_cache_size (currently raid5 only)
|
|
number of entries in the stripe cache. This is writable, but
|
|
there are upper and lower limits (32768, 16). Default is 128.
|
|
strip_cache_active (currently raid5 only)
|
|
number of active entries in the stripe cache
|
|
preread_bypass_threshold (currently raid5 only)
|
|
number of times a stripe requiring preread will be bypassed by
|
|
a stripe that does not require preread. For fairness defaults
|
|
to 1. Setting this to 0 disables bypass accounting and
|
|
requires preread stripes to wait until all full-width stripe-
|
|
writes are complete. Valid values are 0 to stripe_cache_size.
|