mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 21:02:19 +00:00
68bab8662f
In certain boards the source for the clk32k clock can be gated. In these boards the clk32k clock can be provided to the driver and it is going to be enabled/disabled when it is needed. If the clk32k clock is not provided the driver will assume that it is always running. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
68 lines
2.0 KiB
Plaintext
68 lines
2.0 KiB
Plaintext
Texas Instruments TWL6040 family
|
|
|
|
The TWL6040s are 8-channel high quality low-power audio codecs providing audio,
|
|
vibra and GPO functionality on OMAP4+ platforms.
|
|
They are connected ot the host processor via i2c for commands, McPDM for audio
|
|
data and commands.
|
|
|
|
Required properties:
|
|
- compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041
|
|
- reg: must be 0x4b for i2c address
|
|
- interrupts: twl6040 has one interrupt line connecteded to the main SoC
|
|
- interrupt-parent: The parent interrupt controller
|
|
- gpio-controller:
|
|
- #gpio-cells = <1>: twl6040 provides GPO lines.
|
|
- twl6040,audpwron-gpio: Power on GPIO line for the twl6040
|
|
|
|
- vio-supply: Regulator for the twl6040 VIO supply
|
|
- v2v1-supply: Regulator for the twl6040 V2V1 supply
|
|
|
|
Optional properties, nodes:
|
|
- enable-active-high: To power on the twl6040 during boot.
|
|
- clocks: phandle to the clk32k clock provider
|
|
- clock-names: Must be "clk32k"
|
|
|
|
Vibra functionality
|
|
Required properties:
|
|
- vddvibl-supply: Regulator for the left vibra motor
|
|
- vddvibr-supply: Regulator for the right vibra motor
|
|
- vibra { }: Configuration section for vibra parameters containing the following
|
|
properties:
|
|
- ti,vibldrv-res: Resistance parameter for left driver
|
|
- ti,vibrdrv-res: Resistance parameter for right driver
|
|
- ti,viblmotor-res: Resistance parameter for left motor
|
|
- ti,viblmotor-res: Resistance parameter for right motor
|
|
|
|
Optional properties within vibra { } section:
|
|
- vddvibl_uV: If the vddvibl default voltage need to be changed
|
|
- vddvibr_uV: If the vddvibr default voltage need to be changed
|
|
|
|
Example:
|
|
&i2c1 {
|
|
twl6040: twl@4b {
|
|
compatible = "ti,twl6040";
|
|
|
|
interrupts = <0 119 4>;
|
|
interrupt-parent = <&gic>;
|
|
twl6040,audpwron-gpio = <&gpio4 31 0>;
|
|
|
|
vio-supply = <&v1v8>;
|
|
v2v1-supply = <&v2v1>;
|
|
enable-active-high;
|
|
|
|
/* regulators for vibra motor */
|
|
vddvibl-supply = <&vbat>;
|
|
vddvibr-supply = <&vbat>;
|
|
|
|
vibra {
|
|
/* Vibra driver, motor resistance parameters */
|
|
ti,vibldrv-res = <8>;
|
|
ti,vibrdrv-res = <3>;
|
|
ti,viblmotor-res = <10>;
|
|
ti,vibrmotor-res = <10>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "twl6040.dtsi"
|