mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
99c88eb244
The bq24192 and bq24192i are mostly identical to the bq24190, TI even published a single datasheet for all 3 of them. The difference between the bq24190 and bq24192[i] is the way charger-type detection is done, the bq24190 is to be directly connected to the USB a/b lines, where as the the bq24192[i] has a gpio which should be driven high/low externally depending on the type of charger connected, from a register level access pov there is no difference. The differences between the bq24192 and bq24192i are: 1) Lower default charge rate on the bq24192i 2) Pre-charge-current can be max 640 mA on the bq24192i On x86/ACPI systems the code which instantiates the i2c client may not know the exact variant being used, so instead of coding the model-id in the i2c_id struct and bailing if it does not match, check the reported model-id matches one of the supported variants. This commit only adds support for the bq24192i as I don't have a bq24192 to test with, adding support for the bq24192 should be as simple as also accepting its model-id in the model-id test. Cc: Liam Breck <kernel@networkimprov.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> |
||
|---|---|---|
| .. | ||
| avs | ||
| reset | ||
| supply | ||
| Kconfig | ||
| Makefile | ||