linux/arch/mips/ar7/platform.c
Florian Fainelli 142a2ceea7 MIPS: AR7: prevent race between clock initialization and devices registration
ar7_regiser_devices needs ar7_clocks_init to have been called first,
however clock.o is currently linked later due to its order in the Makefile,
therefore ar7_clocks_init always gets called later than ar7_register_devices
because both have the same initcall level. Fix this by moving
ar7_register_devices to the right initcall level.

Reported-by: Michael J. Evans <mjevans1983@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1212/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21 21:31:22 +01:00

651 lines
14 KiB
C

/*
* Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/vlynq.h>
#include <linux/leds.h>
#include <linux/string.h>
#include <linux/etherdevice.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
#include <asm/mach-ar7/gpio.h>
#include <asm/mach-ar7/prom.h>
/*****************************************************************************
* VLYNQ Bus
****************************************************************************/
struct plat_vlynq_data {
struct plat_vlynq_ops ops;
int gpio_bit;
int reset_bit;
};
static int vlynq_on(struct vlynq_device *dev)
{
int ret;
struct plat_vlynq_data *pdata = dev->dev.platform_data;
ret = gpio_request(pdata->gpio_bit, "vlynq");
if (ret)
goto out;
ar7_device_reset(pdata->reset_bit);
ret = ar7_gpio_disable(pdata->gpio_bit);
if (ret)
goto out_enabled;
ret = ar7_gpio_enable(pdata->gpio_bit);
if (ret)
goto out_enabled;
ret = gpio_direction_output(pdata->gpio_bit, 0);
if (ret)
goto out_gpio_enabled;
msleep(50);
gpio_set_value(pdata->gpio_bit, 1);
msleep(50);
return 0;
out_gpio_enabled:
ar7_gpio_disable(pdata->gpio_bit);
out_enabled:
ar7_device_disable(pdata->reset_bit);
gpio_free(pdata->gpio_bit);
out:
return ret;
}
static void vlynq_off(struct vlynq_device *dev)
{
struct plat_vlynq_data *pdata = dev->dev.platform_data;
ar7_gpio_disable(pdata->gpio_bit);
gpio_free(pdata->gpio_bit);
ar7_device_disable(pdata->reset_bit);
}
static struct resource vlynq_low_res[] = {
{
.name = "regs",
.flags = IORESOURCE_MEM,
.start = AR7_REGS_VLYNQ0,
.end = AR7_REGS_VLYNQ0 + 0xff,
},
{
.name = "irq",
.flags = IORESOURCE_IRQ,
.start = 29,
.end = 29,
},
{
.name = "mem",
.flags = IORESOURCE_MEM,
.start = 0x04000000,
.end = 0x04ffffff,
},
{
.name = "devirq",
.flags = IORESOURCE_IRQ,
.start = 80,
.end = 111,
},
};
static struct resource vlynq_high_res[] = {
{
.name = "regs",
.flags = IORESOURCE_MEM,
.start = AR7_REGS_VLYNQ1,
.end = AR7_REGS_VLYNQ1 + 0xff,
},
{
.name = "irq",
.flags = IORESOURCE_IRQ,
.start = 33,
.end = 33,
},
{
.name = "mem",
.flags = IORESOURCE_MEM,
.start = 0x0c000000,
.end = 0x0cffffff,
},
{
.name = "devirq",
.flags = IORESOURCE_IRQ,
.start = 112,
.end = 143,
},
};
static struct plat_vlynq_data vlynq_low_data = {
.ops = {
.on = vlynq_on,
.off = vlynq_off,
},
.reset_bit = 20,
.gpio_bit = 18,
};
static struct plat_vlynq_data vlynq_high_data = {
.ops = {
.on = vlynq_on,
.off = vlynq_off,
},
.reset_bit = 16,
.gpio_bit = 19,
};
static struct platform_device vlynq_low = {
.id = 0,
.name = "vlynq",
.dev = {
.platform_data = &vlynq_low_data,
},
.resource = vlynq_low_res,
.num_resources = ARRAY_SIZE(vlynq_low_res),
};
static struct platform_device vlynq_high = {
.id = 1,
.name = "vlynq",
.dev = {
.platform_data = &vlynq_high_data,
},
.resource = vlynq_high_res,
.num_resources = ARRAY_SIZE(vlynq_high_res),
};
/*****************************************************************************
* Flash
****************************************************************************/
static struct resource physmap_flash_resource = {
.name = "mem",
.flags = IORESOURCE_MEM,
.start = 0x10000000,
.end = 0x107fffff,
};
static struct physmap_flash_data physmap_flash_data = {
.width = 2,
};
static struct platform_device physmap_flash = {
.name = "physmap-flash",
.dev = {
.platform_data = &physmap_flash_data,
},
.resource = &physmap_flash_resource,
.num_resources = 1,
};
/*****************************************************************************
* Ethernet
****************************************************************************/
static struct resource cpmac_low_res[] = {
{
.name = "regs",
.flags = IORESOURCE_MEM,
.start = AR7_REGS_MAC0,
.end = AR7_REGS_MAC0 + 0x7ff,
},
{
.name = "irq",
.flags = IORESOURCE_IRQ,
.start = 27,
.end = 27,
},
};
static struct resource cpmac_high_res[] = {
{
.name = "regs",
.flags = IORESOURCE_MEM,
.start = AR7_REGS_MAC1,
.end = AR7_REGS_MAC1 + 0x7ff,
},
{
.name = "irq",
.flags = IORESOURCE_IRQ,
.start = 41,
.end = 41,
},
};
static struct fixed_phy_status fixed_phy_status __initdata = {
.link = 1,
.speed = 100,
.duplex = 1,
};
static struct plat_cpmac_data cpmac_low_data = {
.reset_bit = 17,
.power_bit = 20,
.phy_mask = 0x80000000,
};
static struct plat_cpmac_data cpmac_high_data = {
.reset_bit = 21,
.power_bit = 22,
.phy_mask = 0x7fffffff,
};
static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
static struct platform_device cpmac_low = {
.id = 0,
.name = "cpmac",
.dev = {
.dma_mask = &cpmac_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &cpmac_low_data,
},
.resource = cpmac_low_res,
.num_resources = ARRAY_SIZE(cpmac_low_res),
};
static struct platform_device cpmac_high = {
.id = 1,
.name = "cpmac",
.dev = {
.dma_mask = &cpmac_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &cpmac_high_data,
},
.resource = cpmac_high_res,
.num_resources = ARRAY_SIZE(cpmac_high_res),
};
static inline unsigned char char2hex(char h)
{
switch (h) {
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
return h - '0';
case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
return h - 'A' + 10;
case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
return h - 'a' + 10;
default:
return 0;
}
}
static void cpmac_get_mac(int instance, unsigned char *dev_addr)
{
int i;
char name[5], default_mac[ETH_ALEN], *mac;
mac = NULL;
sprintf(name, "mac%c", 'a' + instance);
mac = prom_getenv(name);
if (!mac) {
sprintf(name, "mac%c", 'a');
mac = prom_getenv(name);
}
if (!mac) {
random_ether_addr(default_mac);
mac = default_mac;
}
for (i = 0; i < 6; i++)
dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
char2hex(mac[i * 3 + 1]);
}
/*****************************************************************************
* USB
****************************************************************************/
static struct resource usb_res[] = {
{
.name = "regs",
.flags = IORESOURCE_MEM,
.start = AR7_REGS_USB,
.end = AR7_REGS_USB + 0xff,
},
{
.name = "irq",
.flags = IORESOURCE_IRQ,
.start = 32,
.end = 32,
},
{
.name = "mem",
.flags = IORESOURCE_MEM,
.start = 0x03400000,
.end = 0x03401fff,
},
};
static struct platform_device ar7_udc = {
.name = "ar7_udc",
.resource = usb_res,
.num_resources = ARRAY_SIZE(usb_res),
};
/*****************************************************************************
* LEDs
****************************************************************************/
static struct gpio_led default_leds[] = {
{
.name = "status",
.gpio = 8,
.active_low = 1,
},
};
static struct gpio_led dsl502t_leds[] = {
{
.name = "status",
.gpio = 9,
.active_low = 1,
},
{
.name = "ethernet",
.gpio = 7,
.active_low = 1,
},
{
.name = "usb",
.gpio = 12,
.active_low = 1,
},
};
static struct gpio_led dg834g_leds[] = {
{
.name = "ppp",
.gpio = 6,
.active_low = 1,
},
{
.name = "status",
.gpio = 7,
.active_low = 1,
},
{
.name = "adsl",
.gpio = 8,
.active_low = 1,
},
{
.name = "wifi",
.gpio = 12,
.active_low = 1,
},
{
.name = "power",
.gpio = 14,
.active_low = 1,
.default_trigger = "default-on",
},
};
static struct gpio_led fb_sl_leds[] = {
{
.name = "1",
.gpio = 7,
},
{
.name = "2",
.gpio = 13,
.active_low = 1,
},
{
.name = "3",
.gpio = 10,
.active_low = 1,
},
{
.name = "4",
.gpio = 12,
.active_low = 1,
},
{
.name = "5",
.gpio = 9,
.active_low = 1,
},
};
static struct gpio_led fb_fon_leds[] = {
{
.name = "1",
.gpio = 8,
},
{
.name = "2",
.gpio = 3,
.active_low = 1,
},
{
.name = "3",
.gpio = 5,
},
{
.name = "4",
.gpio = 4,
.active_low = 1,
},
{
.name = "5",
.gpio = 11,
.active_low = 1,
},
};
static struct gpio_led_platform_data ar7_led_data;
static struct platform_device ar7_gpio_leds = {
.name = "leds-gpio",
.dev = {
.platform_data = &ar7_led_data,
}
};
static void __init detect_leds(void)
{
char *prid, *usb_prod;
/* Default LEDs */
ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
ar7_led_data.leds = default_leds;
/* FIXME: the whole thing is unreliable */
prid = prom_getenv("ProductID");
usb_prod = prom_getenv("usb_prod");
/* If we can't get the product id from PROM, use the default LEDs */
if (!prid)
return;
if (strstr(prid, "Fritz_Box_FON")) {
ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
ar7_led_data.leds = fb_fon_leds;
} else if (strstr(prid, "Fritz_Box_")) {
ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
ar7_led_data.leds = fb_sl_leds;
} else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
&& usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
ar7_led_data.leds = dsl502t_leds;
} else if (strstr(prid, "DG834")) {
ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
ar7_led_data.leds = dg834g_leds;
}
}
/*****************************************************************************
* Watchdog
****************************************************************************/
static struct resource ar7_wdt_res = {
.name = "regs",
.flags = IORESOURCE_MEM,
.start = -1, /* Filled at runtime */
.end = -1, /* Filled at runtime */
};
static struct platform_device ar7_wdt = {
.name = "ar7_wdt",
.resource = &ar7_wdt_res,
.num_resources = 1,
};
/*****************************************************************************
* Init
****************************************************************************/
static int __init ar7_register_uarts(void)
{
#ifdef CONFIG_SERIAL_8250
static struct uart_port uart_port __initdata;
struct clk *bus_clk;
int res;
memset(&uart_port, 0, sizeof(struct uart_port));
bus_clk = clk_get(NULL, "bus");
if (IS_ERR(bus_clk))
panic("unable to get bus clk\n");
uart_port.type = PORT_16550A;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
uart_port.regshift = 2;
uart_port.line = 0;
uart_port.irq = AR7_IRQ_UART0;
uart_port.mapbase = AR7_REGS_UART0;
uart_port.membase = ioremap(uart_port.mapbase, 256);
res = early_serial_setup(&uart_port);
if (res)
return res;
/* Only TNETD73xx have a second serial port */
if (ar7_has_second_uart()) {
uart_port.line = 1;
uart_port.irq = AR7_IRQ_UART1;
uart_port.mapbase = UR8_REGS_UART1;
uart_port.membase = ioremap(uart_port.mapbase, 256);
res = early_serial_setup(&uart_port);
if (res)
return res;
}
#endif
return 0;
}
static int __init ar7_register_devices(void)
{
void __iomem *bootcr;
u32 val;
int res;
res = ar7_register_uarts();
if (res)
pr_err("unable to setup uart(s): %d\n", res);
res = platform_device_register(&physmap_flash);
if (res)
pr_warning("unable to register physmap-flash: %d\n", res);
ar7_device_disable(vlynq_low_data.reset_bit);
res = platform_device_register(&vlynq_low);
if (res)
pr_warning("unable to register vlynq-low: %d\n", res);
if (ar7_has_high_vlynq()) {
ar7_device_disable(vlynq_high_data.reset_bit);
res = platform_device_register(&vlynq_high);
if (res)
pr_warning("unable to register vlynq-high: %d\n", res);
}
if (ar7_has_high_cpmac()) {
res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
if (!res) {
cpmac_get_mac(1, cpmac_high_data.dev_addr);
res = platform_device_register(&cpmac_high);
if (res)
pr_warning("unable to register cpmac-high: %d\n", res);
} else
pr_warning("unable to add cpmac-high phy: %d\n", res);
} else
cpmac_low_data.phy_mask = 0xffffffff;
res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
if (!res) {
cpmac_get_mac(0, cpmac_low_data.dev_addr);
res = platform_device_register(&cpmac_low);
if (res)
pr_warning("unable to register cpmac-low: %d\n", res);
} else
pr_warning("unable to add cpmac-low phy: %d\n", res);
detect_leds();
res = platform_device_register(&ar7_gpio_leds);
if (res)
pr_warning("unable to register leds: %d\n", res);
res = platform_device_register(&ar7_udc);
if (res)
pr_warning("unable to register usb slave: %d\n", res);
/* Register watchdog only if enabled in hardware */
bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
val = readl(bootcr);
iounmap(bootcr);
if (val & AR7_WDT_HW_ENA) {
if (ar7_has_high_vlynq())
ar7_wdt_res.start = UR8_REGS_WDT;
else
ar7_wdt_res.start = AR7_REGS_WDT;
ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
res = platform_device_register(&ar7_wdt);
if (res)
pr_warning("unable to register watchdog: %d\n", res);
}
return 0;
}
device_initcall(ar7_register_devices);