mirror of
https://github.com/torvalds/linux.git
synced 2024-12-23 11:21:33 +00:00
a4e6f1c49e
The Samsung S6E63J0X03 is a 1.63" 320x320 AMOLED panel connected using MIPI-DSI interfaces. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1499912443-3671-2-git-send-email-hoegeun.kwon@samsung.com
25 lines
676 B
Plaintext
25 lines
676 B
Plaintext
Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode)
|
|
|
|
Required properties:
|
|
- compatible: "samsung,s6e63j0x03"
|
|
- reg: the virtual channel number of a DSI peripheral
|
|
- vdd3-supply: I/O voltage supply
|
|
- vci-supply: voltage supply for analog circuits
|
|
- reset-gpios: a GPIO spec for the reset pin (active low)
|
|
- te-gpios: a GPIO spec for the tearing effect synchronization signal
|
|
gpio pin (active high)
|
|
|
|
Example:
|
|
&dsi {
|
|
...
|
|
|
|
panel@0 {
|
|
compatible = "samsung,s6e63j0x03";
|
|
reg = <0>;
|
|
vdd3-supply = <&ldo16_reg>;
|
|
vci-supply = <&ldo20_reg>;
|
|
reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
|
|
te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|