mirror of
https://github.com/torvalds/linux.git
synced 2024-12-22 19:01:37 +00:00
18c25ff457
Use existing suspend, resume implementation for hibernation callbacks. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
313 lines
7.1 KiB
C
313 lines
7.1 KiB
C
/*
|
|
* AHCI SATA platform driver
|
|
*
|
|
* Copyright 2004-2005 Red Hat, Inc.
|
|
* Jeff Garzik <jgarzik@pobox.com>
|
|
* Copyright 2010 MontaVista Software, LLC.
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/ahci_platform.h>
|
|
#include "ahci.h"
|
|
|
|
enum ahci_type {
|
|
AHCI, /* standard platform ahci */
|
|
IMX53_AHCI, /* ahci on i.mx53 */
|
|
STRICT_AHCI, /* delayed DMA engine start */
|
|
};
|
|
|
|
static struct platform_device_id ahci_devtype[] = {
|
|
{
|
|
.name = "ahci",
|
|
.driver_data = AHCI,
|
|
}, {
|
|
.name = "imx53-ahci",
|
|
.driver_data = IMX53_AHCI,
|
|
}, {
|
|
.name = "strict-ahci",
|
|
.driver_data = STRICT_AHCI,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, ahci_devtype);
|
|
|
|
|
|
static const struct ata_port_info ahci_port_info[] = {
|
|
/* by features */
|
|
[AHCI] = {
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ops,
|
|
},
|
|
[IMX53_AHCI] = {
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_pmp_retry_srst_ops,
|
|
},
|
|
[STRICT_AHCI] = {
|
|
AHCI_HFLAGS (AHCI_HFLAG_DELAY_ENGINE),
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ops,
|
|
},
|
|
};
|
|
|
|
static struct scsi_host_template ahci_platform_sht = {
|
|
AHCI_SHT("ahci_platform"),
|
|
};
|
|
|
|
static int __init ahci_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct ahci_platform_data *pdata = dev_get_platdata(dev);
|
|
const struct platform_device_id *id = platform_get_device_id(pdev);
|
|
struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
|
|
const struct ata_port_info *ppi[] = { &pi, NULL };
|
|
struct ahci_host_priv *hpriv;
|
|
struct ata_host *host;
|
|
struct resource *mem;
|
|
int irq;
|
|
int n_ports;
|
|
int i;
|
|
int rc;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!mem) {
|
|
dev_err(dev, "no mmio space\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0) {
|
|
dev_err(dev, "no irq\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pdata && pdata->ata_port_info)
|
|
pi = *pdata->ata_port_info;
|
|
|
|
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv) {
|
|
dev_err(dev, "can't alloc ahci_host_priv\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
hpriv->flags |= (unsigned long)pi.private_data;
|
|
|
|
hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
|
|
if (!hpriv->mmio) {
|
|
dev_err(dev, "can't map %pR\n", mem);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Some platforms might need to prepare for mmio region access,
|
|
* which could be done in the following init call. So, the mmio
|
|
* region shouldn't be accessed before init (if provided) has
|
|
* returned successfully.
|
|
*/
|
|
if (pdata && pdata->init) {
|
|
rc = pdata->init(dev, hpriv->mmio);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
ahci_save_initial_config(dev, hpriv,
|
|
pdata ? pdata->force_port_map : 0,
|
|
pdata ? pdata->mask_port_map : 0);
|
|
|
|
/* prepare host */
|
|
if (hpriv->cap & HOST_CAP_NCQ)
|
|
pi.flags |= ATA_FLAG_NCQ;
|
|
|
|
if (hpriv->cap & HOST_CAP_PMP)
|
|
pi.flags |= ATA_FLAG_PMP;
|
|
|
|
ahci_set_em_messages(hpriv, &pi);
|
|
|
|
/* CAP.NP sometimes indicate the index of the last enabled
|
|
* port, at other times, that of the last possible port, so
|
|
* determining the maximum port number requires looking at
|
|
* both CAP.NP and port_map.
|
|
*/
|
|
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
|
|
|
|
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
|
|
if (!host) {
|
|
rc = -ENOMEM;
|
|
goto err0;
|
|
}
|
|
|
|
host->private_data = hpriv;
|
|
|
|
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
|
|
host->flags |= ATA_HOST_PARALLEL_SCAN;
|
|
else
|
|
printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
|
|
|
|
if (pi.flags & ATA_FLAG_EM)
|
|
ahci_reset_em(host);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
ata_port_desc(ap, "mmio %pR", mem);
|
|
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
|
|
|
|
/* set enclosure management message type */
|
|
if (ap->flags & ATA_FLAG_EM)
|
|
ap->em_message_type = hpriv->em_msg_type;
|
|
|
|
/* disabled/not-implemented port */
|
|
if (!(hpriv->port_map & (1 << i)))
|
|
ap->ops = &ata_dummy_port_ops;
|
|
}
|
|
|
|
rc = ahci_reset_controller(host);
|
|
if (rc)
|
|
goto err0;
|
|
|
|
ahci_init_controller(host);
|
|
ahci_print_info(host, "platform");
|
|
|
|
rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
|
|
&ahci_platform_sht);
|
|
if (rc)
|
|
goto err0;
|
|
|
|
return 0;
|
|
err0:
|
|
if (pdata && pdata->exit)
|
|
pdata->exit(dev);
|
|
return rc;
|
|
}
|
|
|
|
static int __devexit ahci_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct ahci_platform_data *pdata = dev_get_platdata(dev);
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
|
|
ata_host_detach(host);
|
|
|
|
if (pdata && pdata->exit)
|
|
pdata->exit(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ahci_suspend(struct device *dev)
|
|
{
|
|
struct ahci_platform_data *pdata = dev_get_platdata(dev);
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
u32 ctl;
|
|
int rc;
|
|
|
|
if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
|
|
dev_err(dev, "firmware update required for suspend/resume\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* AHCI spec rev1.1 section 8.3.3:
|
|
* Software must disable interrupts prior to requesting a
|
|
* transition of the HBA to D3 state.
|
|
*/
|
|
ctl = readl(mmio + HOST_CTL);
|
|
ctl &= ~HOST_IRQ_EN;
|
|
writel(ctl, mmio + HOST_CTL);
|
|
readl(mmio + HOST_CTL); /* flush */
|
|
|
|
rc = ata_host_suspend(host, PMSG_SUSPEND);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (pdata && pdata->suspend)
|
|
return pdata->suspend(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int ahci_resume(struct device *dev)
|
|
{
|
|
struct ahci_platform_data *pdata = dev_get_platdata(dev);
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
int rc;
|
|
|
|
if (pdata && pdata->resume) {
|
|
rc = pdata->resume(dev);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
|
|
rc = ahci_reset_controller(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ahci_init_controller(host);
|
|
}
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
|
|
|
|
static const struct of_device_id ahci_of_match[] = {
|
|
{ .compatible = "calxeda,hb-ahci", },
|
|
{ .compatible = "snps,spear-ahci", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ahci_of_match);
|
|
|
|
static struct platform_driver ahci_driver = {
|
|
.remove = __devexit_p(ahci_remove),
|
|
.driver = {
|
|
.name = "ahci",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = ahci_of_match,
|
|
.pm = &ahci_pm_ops,
|
|
},
|
|
.id_table = ahci_devtype,
|
|
};
|
|
|
|
static int __init ahci_init(void)
|
|
{
|
|
return platform_driver_probe(&ahci_driver, ahci_probe);
|
|
}
|
|
module_init(ahci_init);
|
|
|
|
static void __exit ahci_exit(void)
|
|
{
|
|
platform_driver_unregister(&ahci_driver);
|
|
}
|
|
module_exit(ahci_exit);
|
|
|
|
MODULE_DESCRIPTION("AHCI SATA platform driver");
|
|
MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:ahci");
|