linux/drivers/scsi/arm/oak.c
Finn Thain 96068e6b4d ncr5380: Remove *_RELEASE macros
The *_RELEASE macros don't tell me anything. In some cases the version in
the macro contradicts the version in the comments. Anyway, the Linux kernel
version is sufficient information. Remove these macros to improve readability.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20 09:11:10 +01:00

209 lines
4.2 KiB
C

/*
* Oak Generic NCR5380 driver
*
* Copyright 1995-2002, Russell King
*/
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <asm/ecard.h>
#include <asm/io.h>
#include "../scsi.h"
#include <scsi/scsi_host.h>
/*#define PSEUDO_DMA*/
#define DONT_USE_INTR
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_local_declare() void __iomem *_base
#define NCR5380_setup(host) _base = priv(host)->base
#define NCR5380_read(reg) readb(_base + ((reg) << 2))
#define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2))
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_info oakscsi_info
#define NCR5380_show_info oakscsi_show_info
#define NCR5380_implementation_fields \
void __iomem *base
#include "../NCR5380.h"
#undef START_DMA_INITIATOR_RECEIVE_REG
#define START_DMA_INITIATOR_RECEIVE_REG (128 + 7)
#define STAT ((128 + 16) << 2)
#define DATA ((128 + 8) << 2)
static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr,
int len)
{
void __iomem *base = priv(instance)->base;
printk("writing %p len %d\n",addr, len);
if(!len) return -1;
while(1)
{
int status;
while (((status = readw(base + STAT)) & 0x100)==0);
}
}
static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr,
int len)
{
void __iomem *base = priv(instance)->base;
printk("reading %p len %d\n", addr, len);
while(len > 0)
{
unsigned int status, timeout;
unsigned long b;
timeout = 0x01FFFFFF;
while (((status = readw(base + STAT)) & 0x100)==0)
{
timeout--;
if(status & 0x200 || !timeout)
{
printk("status = %08X\n", status);
return 1;
}
}
if(len >= 128)
{
readsw(base + DATA, addr, 128);
addr += 128;
len -= 128;
}
else
{
b = (unsigned long) readw(base + DATA);
*addr ++ = b;
len -= 1;
if(len)
*addr ++ = b>>8;
len -= 1;
}
}
return 0;
}
#undef STAT
#undef DATA
#include "../NCR5380.c"
static struct scsi_host_template oakscsi_template = {
.module = THIS_MODULE,
.show_info = oakscsi_show_info,
.name = "Oak 16-bit SCSI",
.info = oakscsi_info,
.queuecommand = oakscsi_queue_command,
.eh_abort_handler = NCR5380_abort,
.eh_bus_reset_handler = NCR5380_bus_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "oakscsi",
};
static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
int ret = -ENOMEM;
ret = ecard_request_resources(ec);
if (ret)
goto out;
host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
if (!host) {
ret = -ENOMEM;
goto release;
}
priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
ecard_resource_len(ec, ECARD_RES_MEMC));
if (!priv(host)->base) {
ret = -ENOMEM;
goto unreg;
}
host->irq = NO_IRQ;
host->n_io_port = 255;
NCR5380_init(host, 0);
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_unmap;
scsi_scan_host(host);
goto out;
out_unmap:
iounmap(priv(host)->base);
unreg:
scsi_host_put(host);
release:
ecard_release_resources(ec);
out:
return ret;
}
static void oakscsi_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
ecard_set_drvdata(ec, NULL);
scsi_remove_host(host);
NCR5380_exit(host);
iounmap(priv(host)->base);
scsi_host_put(host);
ecard_release_resources(ec);
}
static const struct ecard_id oakscsi_cids[] = {
{ MANU_OAK, PROD_OAK_SCSI },
{ 0xffff, 0xffff }
};
static struct ecard_driver oakscsi_driver = {
.probe = oakscsi_probe,
.remove = oakscsi_remove,
.id_table = oakscsi_cids,
.drv = {
.name = "oakscsi",
},
};
static int __init oakscsi_init(void)
{
return ecard_register_driver(&oakscsi_driver);
}
static void __exit oakscsi_exit(void)
{
ecard_remove_driver(&oakscsi_driver);
}
module_init(oakscsi_init);
module_exit(oakscsi_exit);
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("Oak SCSI driver");
MODULE_LICENSE("GPL");