mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 05:02:12 +00:00
a37571a29e
Core changes: - Add the devm_pinctrl_register() API and switch all applicable drivers to use it, saving lots of lines of code all over the place. New drivers: - New driver for the Broadcom NS2 SoC. - New subdriver for the PXA25x SoCs. - New subdriver for the AMLogic Meson GXBB SoC. Driver improvements: - The Intel Baytrail driver now properly supports pin control. - The Nomadik, Rockchip, Broadcom BCM2835 supports the .get_direction() callback in the GPIO portions. - Continued development and stabilization of several SH-PFC SoC subdrivers: r8a7795, r8a7790, r8a7794 etc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXPZ9PAAoJEEEQszewGV1zboIQALtGX/tyKFzaOsj7WxHHjmfb yufqU62NE0sPT6/hzUY3a1U9dpakbMehBXy0go0vcShmPSznX2glFv4GR6LEeE0+ o0JNv0d13f2s5WPEqn6L/ePuSuNNjfkwjZ7YJlAXx/WqAWI9c70H8/VHsXEObWOe ZsAZx2FdUFDOxugDWsCmU6kt7RXbqTzEz2M/dDANr4B2cRH/3yny797P2y9tLy3w Rqsdqw1C1A9SICSIRZ+YBWctXhRq5APsB75IncUYIQJF5hXoAcBCp6v+cNZHpXOw X9J+zKDeMjOSsVvOyHA+4P+vPYgkOPl9GuUVJRvnbfCZYKEhDM1e5F393Cf7gYYz dIEAzIFlPmZCMxog7AWEA0yDp2rJ2W/5WoN7pg+a5cKSHgriIry1sxDslBD2b9ZW XxdVm4pMOiVw6yokHI4g2hcDsZOEW8zhPQi1wPuVuJ3k1m7T/d13mFAFTSWwOLVx WFDLuD20ybkCVmxEs0ePrDzLcgEnxW40src6lqSzIx8bUBCH+iWPkIPH0fAJ6bNK TFtfcCFrtE2YmpxrCgZceTLER/7jAGkXFegbJq1epNmz7+0wbEbRxcVFE1IbYUBW ejslgTtLDvnzzkR7UISZF/Qna066tCGT52sEA82ZcrqytGkSTLB4kUDkQvXaCB0r 4DLJ47K32mQu3MrOPLjE =tlvn -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This kernel cycle was quite calm when it comes to pin control and there is really just one major change, and that is the introduction of devm_pinctrl_register() managed resources. Apart from that linear development, details below. Core changes: - Add the devm_pinctrl_register() API and switch all applicable drivers to use it, saving lots of lines of code all over the place. New drivers: - driver for the Broadcom NS2 SoC - subdriver for the PXA25x SoCs - subdriver for the AMLogic Meson GXBB SoC Driver improvements: - the Intel Baytrail driver now properly supports pin control - Nomadik, Rockchip, Broadcom BCM2835 support the .get_direction() callback in the GPIO portions - continued development and stabilization of several SH-PFC SoC subdrivers: r8a7795, r8a7790, r8a7794 etc" * tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (85 commits) Revert "pinctrl: tegra: avoid parked_reg and parked_bank" pinctrl: meson: Fix eth_tx_en bit index pinctrl: tegra: avoid parked_reg and parked_bank pinctrl: tegra: Correctly check the supported configuration pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC pinctrl: rockchip: fix pull setting error for rk3399 pinctrl: stm32: Implement .pin_config_dbg_show() pinctrl: nomadik: hide nmk_gpio_get_mode when unused pinctrl: ns2: rename pinctrl_utils_dt_free_map pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enable pinctrl: at91: Make at91_gpio_template const pinctrl: baytrail: fix some error handling in debugfs pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC pinctrl: sirf/atlas7: trivial fix of spelling mistake on flagged pinctrl: sh-pfc: Kill unused variable in sh_pfc_remove() pinctrl: nomadik: implement .get_direction() pinctrl: nomadik: use BIT() with offsets consequently pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration ...
1102 lines
30 KiB
C
1102 lines
30 KiB
C
/*
|
|
* Driver for the Atmel PIO4 controller
|
|
*
|
|
* Copyright (C) 2015 Atmel,
|
|
* 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio/driver.h>
|
|
/* FIXME: needed for gpio_to_irq(), get rid of this */
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/slab.h>
|
|
#include "core.h"
|
|
#include "pinconf.h"
|
|
#include "pinctrl-utils.h"
|
|
|
|
/*
|
|
* Warning:
|
|
* In order to not introduce confusion between Atmel PIO groups and pinctrl
|
|
* framework groups, Atmel PIO groups will be called banks, line is kept to
|
|
* designed the pin id into this bank.
|
|
*/
|
|
|
|
#define ATMEL_PIO_MSKR 0x0000
|
|
#define ATMEL_PIO_CFGR 0x0004
|
|
#define ATMEL_PIO_CFGR_FUNC_MASK GENMASK(2, 0)
|
|
#define ATMEL_PIO_DIR_MASK BIT(8)
|
|
#define ATMEL_PIO_PUEN_MASK BIT(9)
|
|
#define ATMEL_PIO_PDEN_MASK BIT(10)
|
|
#define ATMEL_PIO_IFEN_MASK BIT(12)
|
|
#define ATMEL_PIO_IFSCEN_MASK BIT(13)
|
|
#define ATMEL_PIO_OPD_MASK BIT(14)
|
|
#define ATMEL_PIO_SCHMITT_MASK BIT(15)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_MASK GENMASK(26, 24)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_FALLING (0 << 24)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_RISING (1 << 24)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_BOTH (2 << 24)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_LOW (3 << 24)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_HIGH (4 << 24)
|
|
#define ATMEL_PIO_PDSR 0x0008
|
|
#define ATMEL_PIO_LOCKSR 0x000C
|
|
#define ATMEL_PIO_SODR 0x0010
|
|
#define ATMEL_PIO_CODR 0x0014
|
|
#define ATMEL_PIO_ODSR 0x0018
|
|
#define ATMEL_PIO_IER 0x0020
|
|
#define ATMEL_PIO_IDR 0x0024
|
|
#define ATMEL_PIO_IMR 0x0028
|
|
#define ATMEL_PIO_ISR 0x002C
|
|
#define ATMEL_PIO_IOFR 0x003C
|
|
|
|
#define ATMEL_PIO_NPINS_PER_BANK 32
|
|
#define ATMEL_PIO_BANK(pin_id) (pin_id / ATMEL_PIO_NPINS_PER_BANK)
|
|
#define ATMEL_PIO_LINE(pin_id) (pin_id % ATMEL_PIO_NPINS_PER_BANK)
|
|
#define ATMEL_PIO_BANK_OFFSET 0x40
|
|
|
|
#define ATMEL_GET_PIN_NO(pinfunc) ((pinfunc) & 0xff)
|
|
#define ATMEL_GET_PIN_FUNC(pinfunc) ((pinfunc >> 16) & 0xf)
|
|
#define ATMEL_GET_PIN_IOSET(pinfunc) ((pinfunc >> 20) & 0xf)
|
|
|
|
struct atmel_pioctrl_data {
|
|
unsigned nbanks;
|
|
};
|
|
|
|
struct atmel_group {
|
|
const char *name;
|
|
u32 pin;
|
|
};
|
|
|
|
struct atmel_pin {
|
|
unsigned pin_id;
|
|
unsigned mux;
|
|
unsigned ioset;
|
|
unsigned bank;
|
|
unsigned line;
|
|
const char *device;
|
|
};
|
|
|
|
/**
|
|
* struct atmel_pioctrl - Atmel PIO controller (pinmux + gpio)
|
|
* @reg_base: base address of the controller.
|
|
* @clk: clock of the controller.
|
|
* @nbanks: number of PIO groups, it can vary depending on the SoC.
|
|
* @pinctrl_dev: pinctrl device registered.
|
|
* @groups: groups table to provide group name and pin in the group to pinctrl.
|
|
* @group_names: group names table to provide all the group/pin names to
|
|
* pinctrl or gpio.
|
|
* @pins: pins table used for both pinctrl and gpio. pin_id, bank and line
|
|
* fields are set at probe time. Other ones are set when parsing dt
|
|
* pinctrl.
|
|
* @npins: number of pins.
|
|
* @gpio_chip: gpio chip registered.
|
|
* @irq_domain: irq domain for the gpio controller.
|
|
* @irqs: table containing the hw irq number of the bank. The index of the
|
|
* table is the bank id.
|
|
* @dev: device entry for the Atmel PIO controller.
|
|
* @node: node of the Atmel PIO controller.
|
|
*/
|
|
struct atmel_pioctrl {
|
|
void __iomem *reg_base;
|
|
struct clk *clk;
|
|
unsigned nbanks;
|
|
struct pinctrl_dev *pinctrl_dev;
|
|
struct atmel_group *groups;
|
|
const char * const *group_names;
|
|
struct atmel_pin **pins;
|
|
unsigned npins;
|
|
struct gpio_chip *gpio_chip;
|
|
struct irq_domain *irq_domain;
|
|
int *irqs;
|
|
unsigned *pm_wakeup_sources;
|
|
unsigned *pm_suspend_backup;
|
|
struct device *dev;
|
|
struct device_node *node;
|
|
};
|
|
|
|
static const char * const atmel_functions[] = {
|
|
"GPIO", "A", "B", "C", "D", "E", "F", "G"
|
|
};
|
|
|
|
/* --- GPIO --- */
|
|
static unsigned int atmel_gpio_read(struct atmel_pioctrl *atmel_pioctrl,
|
|
unsigned int bank, unsigned int reg)
|
|
{
|
|
return readl_relaxed(atmel_pioctrl->reg_base
|
|
+ ATMEL_PIO_BANK_OFFSET * bank + reg);
|
|
}
|
|
|
|
static void atmel_gpio_write(struct atmel_pioctrl *atmel_pioctrl,
|
|
unsigned int bank, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
writel_relaxed(val, atmel_pioctrl->reg_base
|
|
+ ATMEL_PIO_BANK_OFFSET * bank + reg);
|
|
}
|
|
|
|
static void atmel_gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
/*
|
|
* Nothing to do, interrupt is cleared when reading the status
|
|
* register.
|
|
*/
|
|
}
|
|
|
|
static int atmel_gpio_irq_set_type(struct irq_data *d, unsigned type)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d);
|
|
struct atmel_pin *pin = atmel_pioctrl->pins[d->hwirq];
|
|
unsigned reg;
|
|
|
|
atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR,
|
|
BIT(pin->line));
|
|
reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR);
|
|
reg &= (~ATMEL_PIO_CFGR_EVTSEL_MASK);
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
reg |= ATMEL_PIO_CFGR_EVTSEL_RISING;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
reg |= ATMEL_PIO_CFGR_EVTSEL_FALLING;
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
reg |= ATMEL_PIO_CFGR_EVTSEL_BOTH;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
reg |= ATMEL_PIO_CFGR_EVTSEL_LOW;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
reg |= ATMEL_PIO_CFGR_EVTSEL_HIGH;
|
|
break;
|
|
case IRQ_TYPE_NONE:
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atmel_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d);
|
|
struct atmel_pin *pin = atmel_pioctrl->pins[d->hwirq];
|
|
|
|
atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_IDR,
|
|
BIT(pin->line));
|
|
}
|
|
|
|
static void atmel_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d);
|
|
struct atmel_pin *pin = atmel_pioctrl->pins[d->hwirq];
|
|
|
|
atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_IER,
|
|
BIT(pin->line));
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int atmel_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d);
|
|
int bank = ATMEL_PIO_BANK(d->hwirq);
|
|
int line = ATMEL_PIO_LINE(d->hwirq);
|
|
|
|
/* The gpio controller has one interrupt line per bank. */
|
|
irq_set_irq_wake(atmel_pioctrl->irqs[bank], on);
|
|
|
|
if (on)
|
|
atmel_pioctrl->pm_wakeup_sources[bank] |= BIT(line);
|
|
else
|
|
atmel_pioctrl->pm_wakeup_sources[bank] &= ~(BIT(line));
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define atmel_gpio_irq_set_wake NULL
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static struct irq_chip atmel_gpio_irq_chip = {
|
|
.name = "GPIO",
|
|
.irq_ack = atmel_gpio_irq_ack,
|
|
.irq_mask = atmel_gpio_irq_mask,
|
|
.irq_unmask = atmel_gpio_irq_unmask,
|
|
.irq_set_type = atmel_gpio_irq_set_type,
|
|
.irq_set_wake = atmel_gpio_irq_set_wake,
|
|
};
|
|
|
|
static void atmel_gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
unsigned int irq = irq_desc_get_irq(desc);
|
|
struct atmel_pioctrl *atmel_pioctrl = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
unsigned long isr;
|
|
int n, bank = -1;
|
|
|
|
/* Find from which bank is the irq received. */
|
|
for (n = 0; n < atmel_pioctrl->nbanks; n++) {
|
|
if (atmel_pioctrl->irqs[n] == irq) {
|
|
bank = n;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (bank < 0) {
|
|
dev_err(atmel_pioctrl->dev,
|
|
"no bank associated to irq %u\n", irq);
|
|
return;
|
|
}
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
for (;;) {
|
|
isr = (unsigned long)atmel_gpio_read(atmel_pioctrl, bank,
|
|
ATMEL_PIO_ISR);
|
|
isr &= (unsigned long)atmel_gpio_read(atmel_pioctrl, bank,
|
|
ATMEL_PIO_IMR);
|
|
if (!isr)
|
|
break;
|
|
|
|
for_each_set_bit(n, &isr, BITS_PER_LONG)
|
|
generic_handle_irq(gpio_to_irq(bank *
|
|
ATMEL_PIO_NPINS_PER_BANK + n));
|
|
}
|
|
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static int atmel_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
|
|
struct atmel_pin *pin = atmel_pioctrl->pins[offset];
|
|
unsigned reg;
|
|
|
|
atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR,
|
|
BIT(pin->line));
|
|
reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR);
|
|
reg &= ~ATMEL_PIO_DIR_MASK;
|
|
atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
|
|
struct atmel_pin *pin = atmel_pioctrl->pins[offset];
|
|
unsigned reg;
|
|
|
|
reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_PDSR);
|
|
|
|
return !!(reg & BIT(pin->line));
|
|
}
|
|
|
|
static int atmel_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
|
|
int value)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
|
|
struct atmel_pin *pin = atmel_pioctrl->pins[offset];
|
|
unsigned reg;
|
|
|
|
atmel_gpio_write(atmel_pioctrl, pin->bank,
|
|
value ? ATMEL_PIO_SODR : ATMEL_PIO_CODR,
|
|
BIT(pin->line));
|
|
|
|
atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR,
|
|
BIT(pin->line));
|
|
reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR);
|
|
reg |= ATMEL_PIO_DIR_MASK;
|
|
atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_CFGR, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atmel_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
|
|
struct atmel_pin *pin = atmel_pioctrl->pins[offset];
|
|
|
|
atmel_gpio_write(atmel_pioctrl, pin->bank,
|
|
val ? ATMEL_PIO_SODR : ATMEL_PIO_CODR,
|
|
BIT(pin->line));
|
|
}
|
|
|
|
static int atmel_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
|
|
|
|
return irq_find_mapping(atmel_pioctrl->irq_domain, offset);
|
|
}
|
|
|
|
static struct gpio_chip atmel_gpio_chip = {
|
|
.direction_input = atmel_gpio_direction_input,
|
|
.get = atmel_gpio_get,
|
|
.direction_output = atmel_gpio_direction_output,
|
|
.set = atmel_gpio_set,
|
|
.to_irq = atmel_gpio_to_irq,
|
|
.base = 0,
|
|
};
|
|
|
|
/* --- PINCTRL --- */
|
|
static unsigned int atmel_pin_config_read(struct pinctrl_dev *pctldev,
|
|
unsigned pin_id)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned bank = atmel_pioctrl->pins[pin_id]->bank;
|
|
unsigned line = atmel_pioctrl->pins[pin_id]->line;
|
|
void __iomem *addr = atmel_pioctrl->reg_base
|
|
+ bank * ATMEL_PIO_BANK_OFFSET;
|
|
|
|
writel_relaxed(BIT(line), addr + ATMEL_PIO_MSKR);
|
|
/* Have to set MSKR first, to access the right pin CFGR. */
|
|
wmb();
|
|
|
|
return readl_relaxed(addr + ATMEL_PIO_CFGR);
|
|
}
|
|
|
|
static void atmel_pin_config_write(struct pinctrl_dev *pctldev,
|
|
unsigned pin_id, u32 conf)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned bank = atmel_pioctrl->pins[pin_id]->bank;
|
|
unsigned line = atmel_pioctrl->pins[pin_id]->line;
|
|
void __iomem *addr = atmel_pioctrl->reg_base
|
|
+ bank * ATMEL_PIO_BANK_OFFSET;
|
|
|
|
writel_relaxed(BIT(line), addr + ATMEL_PIO_MSKR);
|
|
/* Have to set MSKR first, to access the right pin CFGR. */
|
|
wmb();
|
|
writel_relaxed(conf, addr + ATMEL_PIO_CFGR);
|
|
}
|
|
|
|
static int atmel_pctl_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return atmel_pioctrl->npins;
|
|
}
|
|
|
|
static const char *atmel_pctl_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return atmel_pioctrl->groups[selector].name;
|
|
}
|
|
|
|
static int atmel_pctl_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned selector, const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = (unsigned *)&atmel_pioctrl->groups[selector].pin;
|
|
*num_pins = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct atmel_group *atmel_pctl_find_group_by_pin(struct pinctrl_dev *pctldev,
|
|
unsigned pin)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
int i;
|
|
|
|
for (i = 0; i < atmel_pioctrl->npins; i++) {
|
|
struct atmel_group *grp = atmel_pioctrl->groups + i;
|
|
|
|
if (grp->pin == pin)
|
|
return grp;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int atmel_pctl_xlate_pinfunc(struct pinctrl_dev *pctldev,
|
|
struct device_node *np,
|
|
u32 pinfunc, const char **grp_name,
|
|
const char **func_name)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned pin_id, func_id;
|
|
struct atmel_group *grp;
|
|
|
|
pin_id = ATMEL_GET_PIN_NO(pinfunc);
|
|
func_id = ATMEL_GET_PIN_FUNC(pinfunc);
|
|
|
|
if (func_id >= ARRAY_SIZE(atmel_functions))
|
|
return -EINVAL;
|
|
|
|
*func_name = atmel_functions[func_id];
|
|
|
|
grp = atmel_pctl_find_group_by_pin(pctldev, pin_id);
|
|
if (!grp)
|
|
return -EINVAL;
|
|
*grp_name = grp->name;
|
|
|
|
atmel_pioctrl->pins[pin_id]->mux = func_id;
|
|
atmel_pioctrl->pins[pin_id]->ioset = ATMEL_GET_PIN_IOSET(pinfunc);
|
|
/* Want the device name not the group one. */
|
|
if (np->parent == atmel_pioctrl->node)
|
|
atmel_pioctrl->pins[pin_id]->device = np->name;
|
|
else
|
|
atmel_pioctrl->pins[pin_id]->device = np->parent->name;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
|
|
struct device_node *np,
|
|
struct pinctrl_map **map,
|
|
unsigned *reserved_maps,
|
|
unsigned *num_maps)
|
|
{
|
|
unsigned num_pins, num_configs, reserve;
|
|
unsigned long *configs;
|
|
struct property *pins;
|
|
bool has_config;
|
|
u32 pinfunc;
|
|
int ret, i;
|
|
|
|
pins = of_find_property(np, "pinmux", NULL);
|
|
if (!pins)
|
|
return -EINVAL;
|
|
|
|
ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
|
|
&num_configs);
|
|
if (ret < 0) {
|
|
dev_err(pctldev->dev, "%s: could not parse node property\n",
|
|
of_node_full_name(np));
|
|
return ret;
|
|
}
|
|
|
|
if (num_configs)
|
|
has_config = true;
|
|
|
|
num_pins = pins->length / sizeof(u32);
|
|
if (!num_pins) {
|
|
dev_err(pctldev->dev, "no pins found in node %s\n",
|
|
of_node_full_name(np));
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* Reserve maps, at least there is a mux map and an optional conf
|
|
* map for each pin.
|
|
*/
|
|
reserve = 1;
|
|
if (has_config && num_pins >= 1)
|
|
reserve++;
|
|
reserve *= num_pins;
|
|
ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, num_maps,
|
|
reserve);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
for (i = 0; i < num_pins; i++) {
|
|
const char *group, *func;
|
|
|
|
ret = of_property_read_u32_index(np, "pinmux", i, &pinfunc);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
ret = atmel_pctl_xlate_pinfunc(pctldev, np, pinfunc, &group,
|
|
&func);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
pinctrl_utils_add_map_mux(pctldev, map, reserved_maps, num_maps,
|
|
group, func);
|
|
|
|
if (has_config) {
|
|
ret = pinctrl_utils_add_map_configs(pctldev, map,
|
|
reserved_maps, num_maps, group,
|
|
configs, num_configs,
|
|
PIN_MAP_TYPE_CONFIGS_GROUP);
|
|
if (ret < 0)
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
exit:
|
|
kfree(configs);
|
|
return ret;
|
|
}
|
|
|
|
static int atmel_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
|
|
struct device_node *np_config,
|
|
struct pinctrl_map **map,
|
|
unsigned *num_maps)
|
|
{
|
|
struct device_node *np;
|
|
unsigned reserved_maps;
|
|
int ret;
|
|
|
|
*map = NULL;
|
|
*num_maps = 0;
|
|
reserved_maps = 0;
|
|
|
|
/*
|
|
* If all the pins of a device have the same configuration (or no one),
|
|
* it is useless to add a subnode, so directly parse node referenced by
|
|
* phandle.
|
|
*/
|
|
ret = atmel_pctl_dt_subnode_to_map(pctldev, np_config, map,
|
|
&reserved_maps, num_maps);
|
|
if (ret) {
|
|
for_each_child_of_node(np_config, np) {
|
|
ret = atmel_pctl_dt_subnode_to_map(pctldev, np, map,
|
|
&reserved_maps, num_maps);
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret < 0) {
|
|
pinctrl_utils_free_map(pctldev, *map, *num_maps);
|
|
dev_err(pctldev->dev, "can't create maps for node %s\n",
|
|
np_config->full_name);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct pinctrl_ops atmel_pctlops = {
|
|
.get_groups_count = atmel_pctl_get_groups_count,
|
|
.get_group_name = atmel_pctl_get_group_name,
|
|
.get_group_pins = atmel_pctl_get_group_pins,
|
|
.dt_node_to_map = atmel_pctl_dt_node_to_map,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
};
|
|
|
|
static int atmel_pmx_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
return ARRAY_SIZE(atmel_functions);
|
|
}
|
|
|
|
static const char *atmel_pmx_get_function_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
return atmel_functions[selector];
|
|
}
|
|
|
|
static int atmel_pmx_get_function_groups(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
const char * const **groups,
|
|
unsigned * const num_groups)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = atmel_pioctrl->group_names;
|
|
*num_groups = atmel_pioctrl->npins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_pmx_set_mux(struct pinctrl_dev *pctldev,
|
|
unsigned function,
|
|
unsigned group)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned pin;
|
|
u32 conf;
|
|
|
|
dev_dbg(pctldev->dev, "enable function %s group %s\n",
|
|
atmel_functions[function], atmel_pioctrl->groups[group].name);
|
|
|
|
pin = atmel_pioctrl->groups[group].pin;
|
|
conf = atmel_pin_config_read(pctldev, pin);
|
|
conf &= (~ATMEL_PIO_CFGR_FUNC_MASK);
|
|
conf |= (function & ATMEL_PIO_CFGR_FUNC_MASK);
|
|
dev_dbg(pctldev->dev, "pin: %u, conf: 0x%08x\n", pin, conf);
|
|
atmel_pin_config_write(pctldev, pin, conf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinmux_ops atmel_pmxops = {
|
|
.get_functions_count = atmel_pmx_get_functions_count,
|
|
.get_function_name = atmel_pmx_get_function_name,
|
|
.get_function_groups = atmel_pmx_get_function_groups,
|
|
.set_mux = atmel_pmx_set_mux,
|
|
};
|
|
|
|
static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev,
|
|
unsigned group,
|
|
unsigned long *config)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned param = pinconf_to_config_param(*config), arg = 0;
|
|
struct atmel_group *grp = atmel_pioctrl->groups + group;
|
|
unsigned pin_id = grp->pin;
|
|
u32 res;
|
|
|
|
res = atmel_pin_config_read(pctldev, pin_id);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
if (!(res & ATMEL_PIO_PUEN_MASK))
|
|
return -EINVAL;
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
if ((res & ATMEL_PIO_PUEN_MASK) ||
|
|
(!(res & ATMEL_PIO_PDEN_MASK)))
|
|
return -EINVAL;
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
if ((res & ATMEL_PIO_PUEN_MASK) ||
|
|
((res & ATMEL_PIO_PDEN_MASK)))
|
|
return -EINVAL;
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
|
|
if (!(res & ATMEL_PIO_OPD_MASK))
|
|
return -EINVAL;
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
if (!(res & ATMEL_PIO_SCHMITT_MASK))
|
|
return -EINVAL;
|
|
arg = 1;
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
|
|
unsigned group,
|
|
unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
struct atmel_group *grp = atmel_pioctrl->groups + group;
|
|
unsigned bank, pin, pin_id = grp->pin;
|
|
u32 mask, conf = 0;
|
|
int i;
|
|
|
|
conf = atmel_pin_config_read(pctldev, pin_id);
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
unsigned param = pinconf_to_config_param(configs[i]);
|
|
unsigned arg = pinconf_to_config_argument(configs[i]);
|
|
|
|
dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n",
|
|
__func__, pin_id, configs[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
conf &= (~ATMEL_PIO_PUEN_MASK);
|
|
conf &= (~ATMEL_PIO_PDEN_MASK);
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
conf |= ATMEL_PIO_PUEN_MASK;
|
|
conf &= (~ATMEL_PIO_PDEN_MASK);
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
conf |= ATMEL_PIO_PDEN_MASK;
|
|
conf &= (~ATMEL_PIO_PUEN_MASK);
|
|
break;
|
|
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
|
|
if (arg == 0)
|
|
conf &= (~ATMEL_PIO_OPD_MASK);
|
|
else
|
|
conf |= ATMEL_PIO_OPD_MASK;
|
|
break;
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
if (arg == 0)
|
|
conf |= ATMEL_PIO_SCHMITT_MASK;
|
|
else
|
|
conf &= (~ATMEL_PIO_SCHMITT_MASK);
|
|
break;
|
|
case PIN_CONFIG_INPUT_DEBOUNCE:
|
|
if (arg == 0) {
|
|
conf &= (~ATMEL_PIO_IFEN_MASK);
|
|
conf &= (~ATMEL_PIO_IFSCEN_MASK);
|
|
} else {
|
|
/*
|
|
* We don't care about the debounce value for several reasons:
|
|
* - can't have different debounce periods inside a same group,
|
|
* - the register to configure this period is a secure register.
|
|
* The debouncing filter can filter a pulse with a duration of less
|
|
* than 1/2 slow clock period.
|
|
*/
|
|
conf |= ATMEL_PIO_IFEN_MASK;
|
|
conf |= ATMEL_PIO_IFSCEN_MASK;
|
|
}
|
|
break;
|
|
case PIN_CONFIG_OUTPUT:
|
|
conf |= ATMEL_PIO_DIR_MASK;
|
|
bank = ATMEL_PIO_BANK(pin_id);
|
|
pin = ATMEL_PIO_LINE(pin_id);
|
|
mask = 1 << pin;
|
|
|
|
if (arg == 0) {
|
|
writel_relaxed(mask, atmel_pioctrl->reg_base +
|
|
bank * ATMEL_PIO_BANK_OFFSET +
|
|
ATMEL_PIO_CODR);
|
|
} else {
|
|
writel_relaxed(mask, atmel_pioctrl->reg_base +
|
|
bank * ATMEL_PIO_BANK_OFFSET +
|
|
ATMEL_PIO_SODR);
|
|
}
|
|
break;
|
|
default:
|
|
dev_warn(pctldev->dev,
|
|
"unsupported configuration parameter: %u\n",
|
|
param);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
dev_dbg(pctldev->dev, "%s: reg=0x%08x\n", __func__, conf);
|
|
atmel_pin_config_write(pctldev, pin_id, conf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atmel_conf_pin_config_dbg_show(struct pinctrl_dev *pctldev,
|
|
struct seq_file *s, unsigned pin_id)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
u32 conf;
|
|
|
|
if (!atmel_pioctrl->pins[pin_id]->device)
|
|
return;
|
|
|
|
if (atmel_pioctrl->pins[pin_id])
|
|
seq_printf(s, " (%s, ioset %u) ",
|
|
atmel_pioctrl->pins[pin_id]->device,
|
|
atmel_pioctrl->pins[pin_id]->ioset);
|
|
|
|
conf = atmel_pin_config_read(pctldev, pin_id);
|
|
if (conf & ATMEL_PIO_PUEN_MASK)
|
|
seq_printf(s, "%s ", "pull-up");
|
|
if (conf & ATMEL_PIO_PDEN_MASK)
|
|
seq_printf(s, "%s ", "pull-down");
|
|
if (conf & ATMEL_PIO_IFEN_MASK)
|
|
seq_printf(s, "%s ", "debounce");
|
|
if (conf & ATMEL_PIO_OPD_MASK)
|
|
seq_printf(s, "%s ", "open-drain");
|
|
if (conf & ATMEL_PIO_SCHMITT_MASK)
|
|
seq_printf(s, "%s ", "schmitt");
|
|
}
|
|
|
|
static const struct pinconf_ops atmel_confops = {
|
|
.pin_config_group_get = atmel_conf_pin_config_group_get,
|
|
.pin_config_group_set = atmel_conf_pin_config_group_set,
|
|
.pin_config_dbg_show = atmel_conf_pin_config_dbg_show,
|
|
};
|
|
|
|
static struct pinctrl_desc atmel_pinctrl_desc = {
|
|
.name = "atmel_pinctrl",
|
|
.confops = &atmel_confops,
|
|
.pctlops = &atmel_pctlops,
|
|
.pmxops = &atmel_pmxops,
|
|
};
|
|
|
|
static int __maybe_unused atmel_pctrl_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct atmel_pioctrl *atmel_pioctrl = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
/*
|
|
* For each bank, save IMR to restore it later and disable all GPIO
|
|
* interrupts excepting the ones marked as wakeup sources.
|
|
*/
|
|
for (i = 0; i < atmel_pioctrl->nbanks; i++) {
|
|
atmel_pioctrl->pm_suspend_backup[i] =
|
|
atmel_gpio_read(atmel_pioctrl, i, ATMEL_PIO_IMR);
|
|
atmel_gpio_write(atmel_pioctrl, i, ATMEL_PIO_IDR,
|
|
~atmel_pioctrl->pm_wakeup_sources[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused atmel_pctrl_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct atmel_pioctrl *atmel_pioctrl = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
for (i = 0; i < atmel_pioctrl->nbanks; i++)
|
|
atmel_gpio_write(atmel_pioctrl, i, ATMEL_PIO_IER,
|
|
atmel_pioctrl->pm_suspend_backup[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops atmel_pctrl_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(atmel_pctrl_suspend, atmel_pctrl_resume)
|
|
};
|
|
|
|
/*
|
|
* The number of banks can be different from a SoC to another one.
|
|
* We can have up to 16 banks.
|
|
*/
|
|
static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = {
|
|
.nbanks = 4,
|
|
};
|
|
|
|
static const struct of_device_id atmel_pctrl_of_match[] = {
|
|
{
|
|
.compatible = "atmel,sama5d2-pinctrl",
|
|
.data = &atmel_sama5d2_pioctrl_data,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, atmel_pctrl_of_match);
|
|
|
|
static int atmel_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct pinctrl_pin_desc *pin_desc;
|
|
const char **group_names;
|
|
const struct of_device_id *match;
|
|
int i, ret;
|
|
struct resource *res;
|
|
struct atmel_pioctrl *atmel_pioctrl;
|
|
struct atmel_pioctrl_data *atmel_pioctrl_data;
|
|
|
|
atmel_pioctrl = devm_kzalloc(dev, sizeof(*atmel_pioctrl), GFP_KERNEL);
|
|
if (!atmel_pioctrl)
|
|
return -ENOMEM;
|
|
atmel_pioctrl->dev = dev;
|
|
atmel_pioctrl->node = dev->of_node;
|
|
platform_set_drvdata(pdev, atmel_pioctrl);
|
|
|
|
match = of_match_node(atmel_pctrl_of_match, dev->of_node);
|
|
if (!match) {
|
|
dev_err(dev, "unknown compatible string\n");
|
|
return -ENODEV;
|
|
}
|
|
atmel_pioctrl_data = (struct atmel_pioctrl_data *)match->data;
|
|
atmel_pioctrl->nbanks = atmel_pioctrl_data->nbanks;
|
|
atmel_pioctrl->npins = atmel_pioctrl->nbanks * ATMEL_PIO_NPINS_PER_BANK;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(dev, "unable to get atmel pinctrl resource\n");
|
|
return -EINVAL;
|
|
}
|
|
atmel_pioctrl->reg_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(atmel_pioctrl->reg_base))
|
|
return -EINVAL;
|
|
|
|
atmel_pioctrl->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(atmel_pioctrl->clk)) {
|
|
dev_err(dev, "failed to get clock\n");
|
|
return PTR_ERR(atmel_pioctrl->clk);
|
|
}
|
|
|
|
atmel_pioctrl->pins = devm_kzalloc(dev, sizeof(*atmel_pioctrl->pins)
|
|
* atmel_pioctrl->npins, GFP_KERNEL);
|
|
if (!atmel_pioctrl->pins)
|
|
return -ENOMEM;
|
|
|
|
pin_desc = devm_kzalloc(dev, sizeof(*pin_desc)
|
|
* atmel_pioctrl->npins, GFP_KERNEL);
|
|
if (!pin_desc)
|
|
return -ENOMEM;
|
|
atmel_pinctrl_desc.pins = pin_desc;
|
|
atmel_pinctrl_desc.npins = atmel_pioctrl->npins;
|
|
|
|
/* One pin is one group since a pin can achieve all functions. */
|
|
group_names = devm_kzalloc(dev, sizeof(*group_names)
|
|
* atmel_pioctrl->npins, GFP_KERNEL);
|
|
if (!group_names)
|
|
return -ENOMEM;
|
|
atmel_pioctrl->group_names = group_names;
|
|
|
|
atmel_pioctrl->groups = devm_kzalloc(&pdev->dev,
|
|
sizeof(*atmel_pioctrl->groups) * atmel_pioctrl->npins,
|
|
GFP_KERNEL);
|
|
if (!atmel_pioctrl->groups)
|
|
return -ENOMEM;
|
|
for (i = 0 ; i < atmel_pioctrl->npins; i++) {
|
|
struct atmel_group *group = atmel_pioctrl->groups + i;
|
|
unsigned bank = ATMEL_PIO_BANK(i);
|
|
unsigned line = ATMEL_PIO_LINE(i);
|
|
|
|
atmel_pioctrl->pins[i] = devm_kzalloc(dev,
|
|
sizeof(**atmel_pioctrl->pins), GFP_KERNEL);
|
|
if (!atmel_pioctrl->pins[i])
|
|
return -ENOMEM;
|
|
|
|
atmel_pioctrl->pins[i]->pin_id = i;
|
|
atmel_pioctrl->pins[i]->bank = bank;
|
|
atmel_pioctrl->pins[i]->line = line;
|
|
|
|
pin_desc[i].number = i;
|
|
/* Pin naming convention: P(bank_name)(bank_pin_number). */
|
|
pin_desc[i].name = kasprintf(GFP_KERNEL, "P%c%d",
|
|
bank + 'A', line);
|
|
|
|
group->name = group_names[i] = pin_desc[i].name;
|
|
group->pin = pin_desc[i].number;
|
|
|
|
dev_dbg(dev, "pin_id=%u, bank=%u, line=%u", i, bank, line);
|
|
}
|
|
|
|
atmel_pioctrl->gpio_chip = &atmel_gpio_chip;
|
|
atmel_pioctrl->gpio_chip->of_node = dev->of_node;
|
|
atmel_pioctrl->gpio_chip->ngpio = atmel_pioctrl->npins;
|
|
atmel_pioctrl->gpio_chip->label = dev_name(dev);
|
|
atmel_pioctrl->gpio_chip->parent = dev;
|
|
atmel_pioctrl->gpio_chip->names = atmel_pioctrl->group_names;
|
|
|
|
atmel_pioctrl->pm_wakeup_sources = devm_kzalloc(dev,
|
|
sizeof(*atmel_pioctrl->pm_wakeup_sources)
|
|
* atmel_pioctrl->nbanks, GFP_KERNEL);
|
|
if (!atmel_pioctrl->pm_wakeup_sources)
|
|
return -ENOMEM;
|
|
|
|
atmel_pioctrl->pm_suspend_backup = devm_kzalloc(dev,
|
|
sizeof(*atmel_pioctrl->pm_suspend_backup)
|
|
* atmel_pioctrl->nbanks, GFP_KERNEL);
|
|
if (!atmel_pioctrl->pm_suspend_backup)
|
|
return -ENOMEM;
|
|
|
|
atmel_pioctrl->irqs = devm_kzalloc(dev, sizeof(*atmel_pioctrl->irqs)
|
|
* atmel_pioctrl->nbanks, GFP_KERNEL);
|
|
if (!atmel_pioctrl->irqs)
|
|
return -ENOMEM;
|
|
|
|
/* There is one controller but each bank has its own irq line. */
|
|
for (i = 0; i < atmel_pioctrl->nbanks; i++) {
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
|
|
if (!res) {
|
|
dev_err(dev, "missing irq resource for group %c\n",
|
|
'A' + i);
|
|
return -EINVAL;
|
|
}
|
|
atmel_pioctrl->irqs[i] = res->start;
|
|
irq_set_chained_handler(res->start, atmel_gpio_irq_handler);
|
|
irq_set_handler_data(res->start, atmel_pioctrl);
|
|
dev_dbg(dev, "bank %i: irq=%pr\n", i, res);
|
|
}
|
|
|
|
atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node,
|
|
atmel_pioctrl->gpio_chip->ngpio,
|
|
&irq_domain_simple_ops, NULL);
|
|
if (!atmel_pioctrl->irq_domain) {
|
|
dev_err(dev, "can't add the irq domain\n");
|
|
return -ENODEV;
|
|
}
|
|
atmel_pioctrl->irq_domain->name = "atmel gpio";
|
|
|
|
for (i = 0; i < atmel_pioctrl->npins; i++) {
|
|
int irq = irq_create_mapping(atmel_pioctrl->irq_domain, i);
|
|
|
|
irq_set_chip_and_handler(irq, &atmel_gpio_irq_chip,
|
|
handle_simple_irq);
|
|
irq_set_chip_data(irq, atmel_pioctrl);
|
|
dev_dbg(dev,
|
|
"atmel gpio irq domain: hwirq: %d, linux irq: %d\n",
|
|
i, irq);
|
|
}
|
|
|
|
ret = clk_prepare_enable(atmel_pioctrl->clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to prepare and enable clock\n");
|
|
goto clk_prepare_enable_error;
|
|
}
|
|
|
|
atmel_pioctrl->pinctrl_dev = devm_pinctrl_register(&pdev->dev,
|
|
&atmel_pinctrl_desc,
|
|
atmel_pioctrl);
|
|
if (IS_ERR(atmel_pioctrl->pinctrl_dev)) {
|
|
ret = PTR_ERR(atmel_pioctrl->pinctrl_dev);
|
|
dev_err(dev, "pinctrl registration failed\n");
|
|
goto clk_unprep;
|
|
}
|
|
|
|
ret = gpiochip_add_data(atmel_pioctrl->gpio_chip, atmel_pioctrl);
|
|
if (ret) {
|
|
dev_err(dev, "failed to add gpiochip\n");
|
|
goto clk_unprep;
|
|
}
|
|
|
|
ret = gpiochip_add_pin_range(atmel_pioctrl->gpio_chip, dev_name(dev),
|
|
0, 0, atmel_pioctrl->gpio_chip->ngpio);
|
|
if (ret) {
|
|
dev_err(dev, "failed to add gpio pin range\n");
|
|
goto gpiochip_add_pin_range_error;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "atmel pinctrl initialized\n");
|
|
|
|
return 0;
|
|
|
|
gpiochip_add_pin_range_error:
|
|
gpiochip_remove(atmel_pioctrl->gpio_chip);
|
|
|
|
clk_unprep:
|
|
clk_disable_unprepare(atmel_pioctrl->clk);
|
|
|
|
clk_prepare_enable_error:
|
|
irq_domain_remove(atmel_pioctrl->irq_domain);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int atmel_pinctrl_remove(struct platform_device *pdev)
|
|
{
|
|
struct atmel_pioctrl *atmel_pioctrl = platform_get_drvdata(pdev);
|
|
|
|
irq_domain_remove(atmel_pioctrl->irq_domain);
|
|
clk_disable_unprepare(atmel_pioctrl->clk);
|
|
gpiochip_remove(atmel_pioctrl->gpio_chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver atmel_pinctrl_driver = {
|
|
.driver = {
|
|
.name = "pinctrl-at91-pio4",
|
|
.of_match_table = atmel_pctrl_of_match,
|
|
.pm = &atmel_pctrl_pm_ops,
|
|
},
|
|
.probe = atmel_pinctrl_probe,
|
|
.remove = atmel_pinctrl_remove,
|
|
};
|
|
module_platform_driver(atmel_pinctrl_driver);
|
|
|
|
MODULE_AUTHOR(Ludovic Desroches <ludovic.desroches@atmel.com>);
|
|
MODULE_DESCRIPTION("Atmel PIO4 pinctrl driver");
|
|
MODULE_LICENSE("GPL v2");
|