mirror of
https://github.com/torvalds/linux.git
synced 2024-12-28 13:51:44 +00:00
9053f4b985
This patch adds device tree bindings for sata port phy parameters in the ahci-ceva.txt file. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
60 lines
2.6 KiB
Plaintext
60 lines
2.6 KiB
Plaintext
Binding for CEVA AHCI SATA Controller
|
|
|
|
Required properties:
|
|
- reg: Physical base address and size of the controller's register area.
|
|
- compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
|
|
- clocks: Input clock specifier. Refer to common clock bindings.
|
|
- interrupts: Interrupt specifier. Refer to interrupt binding.
|
|
- ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
|
|
- ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
|
|
The fields for the above parameter must be as shown below:
|
|
ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
|
|
CINMP : COMINIT Negate Minimum Period.
|
|
CIBGN : COMINIT Burst Gap Nominal.
|
|
CIBGMX: COMINIT Burst Gap Maximum.
|
|
CIBGMN: COMINIT Burst Gap Minimum.
|
|
- ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
|
|
- ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
|
|
The fields for the above parameter must be as shown below:
|
|
ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
|
|
CWBGMN: COMWAKE Burst Gap Minimum.
|
|
CWBGMX: COMWAKE Burst Gap Maximum.
|
|
CWBGN: COMWAKE Burst Gap Nominal.
|
|
CWNMP: COMWAKE Negate Minimum Period.
|
|
- ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
|
|
- ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
|
|
The fields for the above parameter must be as shown below:
|
|
ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
|
|
BMX: COM Burst Maximum.
|
|
BNM: COM Burst Nominal.
|
|
SFD: Signal Failure Detection value.
|
|
PTST: Partial to Slumber timer value.
|
|
- ceva,p0-retry-params: Retry interval timing value for port 0.
|
|
- ceva,p1-retry-params: Retry interval timing value for port 1.
|
|
The fields for the above parameter must be as shown below:
|
|
ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
|
|
RIT: Retry Interval Timer.
|
|
RCT: Rate Change Timer.
|
|
|
|
Optional properties:
|
|
- ceva,broken-gen2: limit to gen1 speed instead of gen2.
|
|
|
|
Examples:
|
|
ahci@fd0c0000 {
|
|
compatible = "ceva,ahci-1v84";
|
|
reg = <0xfd0c0000 0x200>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 133 4>;
|
|
clocks = <&clkc SATA_CLK_ID>;
|
|
ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
|
|
ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
|
|
ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
|
|
ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
|
|
|
|
ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
|
|
ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
|
|
ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
|
|
ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
|
|
ceva,broken-gen2;
|
|
};
|