mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 05:11:48 +00:00
54f4d144eb
Add "wkupclk" and "refclk" information to DT binding information. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
94 lines
3.1 KiB
Plaintext
94 lines
3.1 KiB
Plaintext
TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs
|
|
|
|
OMAP CONTROL PHY
|
|
|
|
Required properties:
|
|
- compatible: Should be one of
|
|
"ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4.
|
|
"ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register
|
|
e.g. USB2_PHY on OMAP5.
|
|
"ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
|
|
e.g. USB3 PHY and SATA PHY on OMAP5.
|
|
"ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on
|
|
DRA7 platform.
|
|
"ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on
|
|
AM437 platform.
|
|
- reg : Address and length of the register set for the device. It contains
|
|
the address of "otghs_control" for control-phy-otghs or "power" register
|
|
for other types.
|
|
- reg-names: should be "otghs_control" control-phy-otghs and "power" for
|
|
other types.
|
|
|
|
omap_control_usb: omap-control-usb@4a002300 {
|
|
compatible = "ti,control-phy-otghs";
|
|
reg = <0x4a00233c 0x4>;
|
|
reg-names = "otghs_control";
|
|
};
|
|
|
|
OMAP USB2 PHY
|
|
|
|
Required properties:
|
|
- compatible: Should be "ti,omap-usb2"
|
|
- reg : Address and length of the register set for the device.
|
|
- #phy-cells: determine the number of cells that should be given in the
|
|
phandle while referencing this phy.
|
|
- clocks: a list of phandles and clock-specifier pairs, one for each entry in
|
|
clock-names.
|
|
- clock-names: should include:
|
|
* "wkupclk" - wakeup clock.
|
|
* "refclk" - reference clock (optional).
|
|
|
|
Optional properties:
|
|
- ctrl-module : phandle of the control module used by PHY driver to power on
|
|
the PHY.
|
|
|
|
This is usually a subnode of ocp2scp to which it is connected.
|
|
|
|
usb2phy@4a0ad080 {
|
|
compatible = "ti,omap-usb2";
|
|
reg = <0x4a0ad080 0x58>;
|
|
ctrl-module = <&omap_control_usb>;
|
|
#phy-cells = <0>;
|
|
clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
|
|
clock-names = "wkupclk", "refclk";
|
|
};
|
|
|
|
TI PIPE3 PHY
|
|
|
|
Required properties:
|
|
- compatible: Should be "ti,phy-usb3" or "ti,phy-pipe3-sata".
|
|
"ti,omap-usb3" is deprecated.
|
|
- reg : Address and length of the register set for the device.
|
|
- reg-names: The names of the register addresses corresponding to the registers
|
|
filled in "reg".
|
|
- #phy-cells: determine the number of cells that should be given in the
|
|
phandle while referencing this phy.
|
|
- clocks: a list of phandles and clock-specifier pairs, one for each entry in
|
|
clock-names.
|
|
- clock-names: should include:
|
|
* "wkupclk" - wakeup clock.
|
|
* "sysclk" - system clock.
|
|
* "refclk" - reference clock.
|
|
|
|
Optional properties:
|
|
- ctrl-module : phandle of the control module used by PHY driver to power on
|
|
the PHY.
|
|
|
|
This is usually a subnode of ocp2scp to which it is connected.
|
|
|
|
usb3phy@4a084400 {
|
|
compatible = "ti,phy-usb3";
|
|
reg = <0x4a084400 0x80>,
|
|
<0x4a084800 0x64>,
|
|
<0x4a084c00 0x40>;
|
|
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
|
|
ctrl-module = <&omap_control_usb>;
|
|
#phy-cells = <0>;
|
|
clocks = <&usb_phy_cm_clk32k>,
|
|
<&sys_clkin>,
|
|
<&usb_otg_ss_refclk960m>;
|
|
clock-names = "wkupclk",
|
|
"sysclk",
|
|
"refclk";
|
|
};
|