mirror of
https://github.com/torvalds/linux.git
synced 2024-11-27 22:51:35 +00:00
725a4a465c
Add ethtool stats support. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1924 lines
56 KiB
C
1924 lines
56 KiB
C
/* sundance.c: A Linux device driver for the Sundance ST201 "Alta". */
|
|
/*
|
|
Written 1999-2000 by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms of
|
|
the GNU General Public License (GPL), incorporated herein by reference.
|
|
Drivers based on or derived from this code fall under the GPL and must
|
|
retain the authorship, copyright and license notice. This file is not
|
|
a complete program and may only be used when the entire operating
|
|
system is licensed under the GPL.
|
|
|
|
The author may be reached as becker@scyld.com, or C/O
|
|
Scyld Computing Corporation
|
|
410 Severn Ave., Suite 210
|
|
Annapolis MD 21403
|
|
|
|
Support and updates available at
|
|
http://www.scyld.com/network/sundance.html
|
|
[link no longer provides useful info -jgarzik]
|
|
Archives of the mailing list are still available at
|
|
http://www.beowulf.org/pipermail/netdrivers/
|
|
|
|
*/
|
|
|
|
#define DRV_NAME "sundance"
|
|
#define DRV_VERSION "1.2"
|
|
#define DRV_RELDATE "11-Sep-2006"
|
|
|
|
|
|
/* The user-configurable values.
|
|
These may be modified when a driver module is loaded.*/
|
|
static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
|
|
/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
|
|
Typical is a 64 element hash table based on the Ethernet CRC. */
|
|
static const int multicast_filter_limit = 32;
|
|
|
|
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
|
|
Setting to > 1518 effectively disables this feature.
|
|
This chip can receive into offset buffers, so the Alpha does not
|
|
need a copy-align. */
|
|
static int rx_copybreak;
|
|
static int flowctrl=1;
|
|
|
|
/* media[] specifies the media type the NIC operates at.
|
|
autosense Autosensing active media.
|
|
10mbps_hd 10Mbps half duplex.
|
|
10mbps_fd 10Mbps full duplex.
|
|
100mbps_hd 100Mbps half duplex.
|
|
100mbps_fd 100Mbps full duplex.
|
|
0 Autosensing active media.
|
|
1 10Mbps half duplex.
|
|
2 10Mbps full duplex.
|
|
3 100Mbps half duplex.
|
|
4 100Mbps full duplex.
|
|
*/
|
|
#define MAX_UNITS 8
|
|
static char *media[MAX_UNITS];
|
|
|
|
|
|
/* Operational parameters that are set at compile time. */
|
|
|
|
/* Keep the ring sizes a power of two for compile efficiency.
|
|
The compiler will convert <unsigned>'%'<2^N> into a bit mask.
|
|
Making the Tx ring too large decreases the effectiveness of channel
|
|
bonding and packet priority, and more than 128 requires modifying the
|
|
Tx error recovery.
|
|
Large receive rings merely waste memory. */
|
|
#define TX_RING_SIZE 32
|
|
#define TX_QUEUE_LEN (TX_RING_SIZE - 1) /* Limit ring entries actually used. */
|
|
#define RX_RING_SIZE 64
|
|
#define RX_BUDGET 32
|
|
#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct netdev_desc)
|
|
#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct netdev_desc)
|
|
|
|
/* Operational parameters that usually are not changed. */
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (4*HZ)
|
|
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
|
|
|
|
/* Include files, designed to support most kernel versions 2.0.0 and later. */
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bitops.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/processor.h> /* Processor type for cache alignment. */
|
|
#include <asm/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
|
|
/* These identify the driver base version and may not be removed. */
|
|
static const char version[] __devinitconst =
|
|
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE
|
|
" Written by Donald Becker\n";
|
|
|
|
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
|
|
MODULE_DESCRIPTION("Sundance Alta Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(debug, int, 0);
|
|
module_param(rx_copybreak, int, 0);
|
|
module_param_array(media, charp, NULL, 0);
|
|
module_param(flowctrl, int, 0);
|
|
MODULE_PARM_DESC(debug, "Sundance Alta debug level (0-5)");
|
|
MODULE_PARM_DESC(rx_copybreak, "Sundance Alta copy breakpoint for copy-only-tiny-frames");
|
|
MODULE_PARM_DESC(flowctrl, "Sundance Alta flow control [0|1]");
|
|
|
|
/*
|
|
Theory of Operation
|
|
|
|
I. Board Compatibility
|
|
|
|
This driver is designed for the Sundance Technologies "Alta" ST201 chip.
|
|
|
|
II. Board-specific settings
|
|
|
|
III. Driver operation
|
|
|
|
IIIa. Ring buffers
|
|
|
|
This driver uses two statically allocated fixed-size descriptor lists
|
|
formed into rings by a branch from the final descriptor to the beginning of
|
|
the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
|
|
Some chips explicitly use only 2^N sized rings, while others use a
|
|
'next descriptor' pointer that the driver forms into rings.
|
|
|
|
IIIb/c. Transmit/Receive Structure
|
|
|
|
This driver uses a zero-copy receive and transmit scheme.
|
|
The driver allocates full frame size skbuffs for the Rx ring buffers at
|
|
open() time and passes the skb->data field to the chip as receive data
|
|
buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
|
|
a fresh skbuff is allocated and the frame is copied to the new skbuff.
|
|
When the incoming frame is larger, the skbuff is passed directly up the
|
|
protocol stack. Buffers consumed this way are replaced by newly allocated
|
|
skbuffs in a later phase of receives.
|
|
|
|
The RX_COPYBREAK value is chosen to trade-off the memory wasted by
|
|
using a full-sized skbuff for small frames vs. the copying costs of larger
|
|
frames. New boards are typically used in generously configured machines
|
|
and the underfilled buffers have negligible impact compared to the benefit of
|
|
a single allocation size, so the default value of zero results in never
|
|
copying packets. When copying is done, the cost is usually mitigated by using
|
|
a combined copy/checksum routine. Copying also preloads the cache, which is
|
|
most useful with small frames.
|
|
|
|
A subtle aspect of the operation is that the IP header at offset 14 in an
|
|
ethernet frame isn't longword aligned for further processing.
|
|
Unaligned buffers are permitted by the Sundance hardware, so
|
|
frames are received into the skbuff at an offset of "+2", 16-byte aligning
|
|
the IP header.
|
|
|
|
IIId. Synchronization
|
|
|
|
The driver runs as two independent, single-threaded flows of control. One
|
|
is the send-packet routine, which enforces single-threaded use by the
|
|
dev->tbusy flag. The other thread is the interrupt handler, which is single
|
|
threaded by the hardware and interrupt handling software.
|
|
|
|
The send packet thread has partial control over the Tx ring and 'dev->tbusy'
|
|
flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next
|
|
queue slot is empty, it clears the tbusy flag when finished otherwise it sets
|
|
the 'lp->tx_full' flag.
|
|
|
|
The interrupt handler has exclusive control over the Rx ring and records stats
|
|
from the Tx ring. After reaping the stats, it marks the Tx queue entry as
|
|
empty by incrementing the dirty_tx mark. Iff the 'lp->tx_full' flag is set, it
|
|
clears both the tx_full and tbusy flags.
|
|
|
|
IV. Notes
|
|
|
|
IVb. References
|
|
|
|
The Sundance ST201 datasheet, preliminary version.
|
|
The Kendin KS8723 datasheet, preliminary version.
|
|
The ICplus IP100 datasheet, preliminary version.
|
|
http://www.scyld.com/expert/100mbps.html
|
|
http://www.scyld.com/expert/NWay.html
|
|
|
|
IVc. Errata
|
|
|
|
*/
|
|
|
|
/* Work-around for Kendin chip bugs. */
|
|
#ifndef CONFIG_SUNDANCE_MMIO
|
|
#define USE_IO_OPS 1
|
|
#endif
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(sundance_pci_tbl) = {
|
|
{ 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 },
|
|
{ 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 },
|
|
{ 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 },
|
|
{ 0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3 },
|
|
{ 0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
|
|
{ 0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
|
|
{ 0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, sundance_pci_tbl);
|
|
|
|
enum {
|
|
netdev_io_size = 128
|
|
};
|
|
|
|
struct pci_id_info {
|
|
const char *name;
|
|
};
|
|
static const struct pci_id_info pci_id_tbl[] __devinitdata = {
|
|
{"D-Link DFE-550TX FAST Ethernet Adapter"},
|
|
{"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"},
|
|
{"D-Link DFE-580TX 4 port Server Adapter"},
|
|
{"D-Link DFE-530TXS FAST Ethernet Adapter"},
|
|
{"D-Link DL10050-based FAST Ethernet Adapter"},
|
|
{"Sundance Technology Alta"},
|
|
{"IC Plus Corporation IP100A FAST Ethernet Adapter"},
|
|
{ } /* terminate list. */
|
|
};
|
|
|
|
/* This driver was written to use PCI memory space, however x86-oriented
|
|
hardware often uses I/O space accesses. */
|
|
|
|
/* Offsets to the device registers.
|
|
Unlike software-only systems, device drivers interact with complex hardware.
|
|
It's not useful to define symbolic names for every register bit in the
|
|
device. The name can only partially document the semantics and make
|
|
the driver longer and more difficult to read.
|
|
In general, only the important configuration values or bits changed
|
|
multiple times should be defined symbolically.
|
|
*/
|
|
enum alta_offsets {
|
|
DMACtrl = 0x00,
|
|
TxListPtr = 0x04,
|
|
TxDMABurstThresh = 0x08,
|
|
TxDMAUrgentThresh = 0x09,
|
|
TxDMAPollPeriod = 0x0a,
|
|
RxDMAStatus = 0x0c,
|
|
RxListPtr = 0x10,
|
|
DebugCtrl0 = 0x1a,
|
|
DebugCtrl1 = 0x1c,
|
|
RxDMABurstThresh = 0x14,
|
|
RxDMAUrgentThresh = 0x15,
|
|
RxDMAPollPeriod = 0x16,
|
|
LEDCtrl = 0x1a,
|
|
ASICCtrl = 0x30,
|
|
EEData = 0x34,
|
|
EECtrl = 0x36,
|
|
FlashAddr = 0x40,
|
|
FlashData = 0x44,
|
|
TxStatus = 0x46,
|
|
TxFrameId = 0x47,
|
|
DownCounter = 0x18,
|
|
IntrClear = 0x4a,
|
|
IntrEnable = 0x4c,
|
|
IntrStatus = 0x4e,
|
|
MACCtrl0 = 0x50,
|
|
MACCtrl1 = 0x52,
|
|
StationAddr = 0x54,
|
|
MaxFrameSize = 0x5A,
|
|
RxMode = 0x5c,
|
|
MIICtrl = 0x5e,
|
|
MulticastFilter0 = 0x60,
|
|
MulticastFilter1 = 0x64,
|
|
RxOctetsLow = 0x68,
|
|
RxOctetsHigh = 0x6a,
|
|
TxOctetsLow = 0x6c,
|
|
TxOctetsHigh = 0x6e,
|
|
TxFramesOK = 0x70,
|
|
RxFramesOK = 0x72,
|
|
StatsCarrierError = 0x74,
|
|
StatsLateColl = 0x75,
|
|
StatsMultiColl = 0x76,
|
|
StatsOneColl = 0x77,
|
|
StatsTxDefer = 0x78,
|
|
RxMissed = 0x79,
|
|
StatsTxXSDefer = 0x7a,
|
|
StatsTxAbort = 0x7b,
|
|
StatsBcastTx = 0x7c,
|
|
StatsBcastRx = 0x7d,
|
|
StatsMcastTx = 0x7e,
|
|
StatsMcastRx = 0x7f,
|
|
/* Aliased and bogus values! */
|
|
RxStatus = 0x0c,
|
|
};
|
|
enum ASICCtrl_HiWord_bit {
|
|
GlobalReset = 0x0001,
|
|
RxReset = 0x0002,
|
|
TxReset = 0x0004,
|
|
DMAReset = 0x0008,
|
|
FIFOReset = 0x0010,
|
|
NetworkReset = 0x0020,
|
|
HostReset = 0x0040,
|
|
ResetBusy = 0x0400,
|
|
};
|
|
|
|
/* Bits in the interrupt status/mask registers. */
|
|
enum intr_status_bits {
|
|
IntrSummary=0x0001, IntrPCIErr=0x0002, IntrMACCtrl=0x0008,
|
|
IntrTxDone=0x0004, IntrRxDone=0x0010, IntrRxStart=0x0020,
|
|
IntrDrvRqst=0x0040,
|
|
StatsMax=0x0080, LinkChange=0x0100,
|
|
IntrTxDMADone=0x0200, IntrRxDMADone=0x0400,
|
|
};
|
|
|
|
/* Bits in the RxMode register. */
|
|
enum rx_mode_bits {
|
|
AcceptAllIPMulti=0x20, AcceptMultiHash=0x10, AcceptAll=0x08,
|
|
AcceptBroadcast=0x04, AcceptMulticast=0x02, AcceptMyPhys=0x01,
|
|
};
|
|
/* Bits in MACCtrl. */
|
|
enum mac_ctrl0_bits {
|
|
EnbFullDuplex=0x20, EnbRcvLargeFrame=0x40,
|
|
EnbFlowCtrl=0x100, EnbPassRxCRC=0x200,
|
|
};
|
|
enum mac_ctrl1_bits {
|
|
StatsEnable=0x0020, StatsDisable=0x0040, StatsEnabled=0x0080,
|
|
TxEnable=0x0100, TxDisable=0x0200, TxEnabled=0x0400,
|
|
RxEnable=0x0800, RxDisable=0x1000, RxEnabled=0x2000,
|
|
};
|
|
|
|
/* The Rx and Tx buffer descriptors. */
|
|
/* Note that using only 32 bit fields simplifies conversion to big-endian
|
|
architectures. */
|
|
struct netdev_desc {
|
|
__le32 next_desc;
|
|
__le32 status;
|
|
struct desc_frag { __le32 addr, length; } frag[1];
|
|
};
|
|
|
|
/* Bits in netdev_desc.status */
|
|
enum desc_status_bits {
|
|
DescOwn=0x8000,
|
|
DescEndPacket=0x4000,
|
|
DescEndRing=0x2000,
|
|
LastFrag=0x80000000,
|
|
DescIntrOnTx=0x8000,
|
|
DescIntrOnDMADone=0x80000000,
|
|
DisableAlign = 0x00000001,
|
|
};
|
|
|
|
#define PRIV_ALIGN 15 /* Required alignment mask */
|
|
/* Use __attribute__((aligned (L1_CACHE_BYTES))) to maintain alignment
|
|
within the structure. */
|
|
#define MII_CNT 4
|
|
struct netdev_private {
|
|
/* Descriptor rings first for alignment. */
|
|
struct netdev_desc *rx_ring;
|
|
struct netdev_desc *tx_ring;
|
|
struct sk_buff* rx_skbuff[RX_RING_SIZE];
|
|
struct sk_buff* tx_skbuff[TX_RING_SIZE];
|
|
dma_addr_t tx_ring_dma;
|
|
dma_addr_t rx_ring_dma;
|
|
struct timer_list timer; /* Media monitoring timer. */
|
|
/* ethtool extra stats */
|
|
struct {
|
|
u64 tx_multiple_collisions;
|
|
u64 tx_single_collisions;
|
|
u64 tx_late_collisions;
|
|
u64 tx_deferred;
|
|
u64 tx_deferred_excessive;
|
|
u64 tx_aborted;
|
|
u64 tx_bcasts;
|
|
u64 rx_bcasts;
|
|
u64 tx_mcasts;
|
|
u64 rx_mcasts;
|
|
} xstats;
|
|
/* Frequently used values: keep some adjacent for cache effect. */
|
|
spinlock_t lock;
|
|
int msg_enable;
|
|
int chip_id;
|
|
unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
|
|
unsigned int rx_buf_sz; /* Based on MTU+slack. */
|
|
struct netdev_desc *last_tx; /* Last Tx descriptor used. */
|
|
unsigned int cur_tx, dirty_tx;
|
|
/* These values are keep track of the transceiver/media in use. */
|
|
unsigned int flowctrl:1;
|
|
unsigned int default_port:4; /* Last dev->if_port value. */
|
|
unsigned int an_enable:1;
|
|
unsigned int speed;
|
|
struct tasklet_struct rx_tasklet;
|
|
struct tasklet_struct tx_tasklet;
|
|
int budget;
|
|
int cur_task;
|
|
/* Multicast and receive mode. */
|
|
spinlock_t mcastlock; /* SMP lock multicast updates. */
|
|
u16 mcast_filter[4];
|
|
/* MII transceiver section. */
|
|
struct mii_if_info mii_if;
|
|
int mii_preamble_required;
|
|
unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */
|
|
struct pci_dev *pci_dev;
|
|
void __iomem *base;
|
|
spinlock_t statlock;
|
|
};
|
|
|
|
/* The station address location in the EEPROM. */
|
|
#define EEPROM_SA_OFFSET 0x10
|
|
#define DEFAULT_INTR (IntrRxDMADone | IntrPCIErr | \
|
|
IntrDrvRqst | IntrTxDone | StatsMax | \
|
|
LinkChange)
|
|
|
|
static int change_mtu(struct net_device *dev, int new_mtu);
|
|
static int eeprom_read(void __iomem *ioaddr, int location);
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location);
|
|
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
|
|
static int mdio_wait_link(struct net_device *dev, int wait);
|
|
static int netdev_open(struct net_device *dev);
|
|
static void check_duplex(struct net_device *dev);
|
|
static void netdev_timer(unsigned long data);
|
|
static void tx_timeout(struct net_device *dev);
|
|
static void init_ring(struct net_device *dev);
|
|
static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
|
|
static int reset_tx (struct net_device *dev);
|
|
static irqreturn_t intr_handler(int irq, void *dev_instance);
|
|
static void rx_poll(unsigned long data);
|
|
static void tx_poll(unsigned long data);
|
|
static void refill_rx (struct net_device *dev);
|
|
static void netdev_error(struct net_device *dev, int intr_status);
|
|
static void netdev_error(struct net_device *dev, int intr_status);
|
|
static void set_rx_mode(struct net_device *dev);
|
|
static int __set_mac_addr(struct net_device *dev);
|
|
static struct net_device_stats *get_stats(struct net_device *dev);
|
|
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static int netdev_close(struct net_device *dev);
|
|
static const struct ethtool_ops ethtool_ops;
|
|
|
|
static void sundance_reset(struct net_device *dev, unsigned long reset_cmd)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base + ASICCtrl;
|
|
int countdown;
|
|
|
|
/* ST201 documentation states ASICCtrl is a 32bit register */
|
|
iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr);
|
|
/* ST201 documentation states reset can take up to 1 ms */
|
|
countdown = 10 + 1;
|
|
while (ioread32 (ioaddr) & (ResetBusy << 16)) {
|
|
if (--countdown == 0) {
|
|
printk(KERN_WARNING "%s : reset not completed !!\n", dev->name);
|
|
break;
|
|
}
|
|
udelay(100);
|
|
}
|
|
}
|
|
|
|
static const struct net_device_ops netdev_ops = {
|
|
.ndo_open = netdev_open,
|
|
.ndo_stop = netdev_close,
|
|
.ndo_start_xmit = start_tx,
|
|
.ndo_get_stats = get_stats,
|
|
.ndo_set_multicast_list = set_rx_mode,
|
|
.ndo_do_ioctl = netdev_ioctl,
|
|
.ndo_tx_timeout = tx_timeout,
|
|
.ndo_change_mtu = change_mtu,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
static int __devinit sundance_probe1 (struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *dev;
|
|
struct netdev_private *np;
|
|
static int card_idx;
|
|
int chip_idx = ent->driver_data;
|
|
int irq;
|
|
int i;
|
|
void __iomem *ioaddr;
|
|
u16 mii_ctl;
|
|
void *ring_space;
|
|
dma_addr_t ring_dma;
|
|
#ifdef USE_IO_OPS
|
|
int bar = 0;
|
|
#else
|
|
int bar = 1;
|
|
#endif
|
|
int phy, phy_end, phy_idx = 0;
|
|
|
|
/* when built into the kernel, we only print version if device is found */
|
|
#ifndef MODULE
|
|
static int printed_version;
|
|
if (!printed_version++)
|
|
printk(version);
|
|
#endif
|
|
|
|
if (pci_enable_device(pdev))
|
|
return -EIO;
|
|
pci_set_master(pdev);
|
|
|
|
irq = pdev->irq;
|
|
|
|
dev = alloc_etherdev(sizeof(*np));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
if (pci_request_regions(pdev, DRV_NAME))
|
|
goto err_out_netdev;
|
|
|
|
ioaddr = pci_iomap(pdev, bar, netdev_io_size);
|
|
if (!ioaddr)
|
|
goto err_out_res;
|
|
|
|
for (i = 0; i < 3; i++)
|
|
((__le16 *)dev->dev_addr)[i] =
|
|
cpu_to_le16(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET));
|
|
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
|
|
|
|
dev->base_addr = (unsigned long)ioaddr;
|
|
dev->irq = irq;
|
|
|
|
np = netdev_priv(dev);
|
|
np->base = ioaddr;
|
|
np->pci_dev = pdev;
|
|
np->chip_id = chip_idx;
|
|
np->msg_enable = (1 << debug) - 1;
|
|
spin_lock_init(&np->lock);
|
|
spin_lock_init(&np->statlock);
|
|
tasklet_init(&np->rx_tasklet, rx_poll, (unsigned long)dev);
|
|
tasklet_init(&np->tx_tasklet, tx_poll, (unsigned long)dev);
|
|
|
|
ring_space = dma_alloc_coherent(&pdev->dev, TX_TOTAL_SIZE,
|
|
&ring_dma, GFP_KERNEL);
|
|
if (!ring_space)
|
|
goto err_out_cleardev;
|
|
np->tx_ring = (struct netdev_desc *)ring_space;
|
|
np->tx_ring_dma = ring_dma;
|
|
|
|
ring_space = dma_alloc_coherent(&pdev->dev, RX_TOTAL_SIZE,
|
|
&ring_dma, GFP_KERNEL);
|
|
if (!ring_space)
|
|
goto err_out_unmap_tx;
|
|
np->rx_ring = (struct netdev_desc *)ring_space;
|
|
np->rx_ring_dma = ring_dma;
|
|
|
|
np->mii_if.dev = dev;
|
|
np->mii_if.mdio_read = mdio_read;
|
|
np->mii_if.mdio_write = mdio_write;
|
|
np->mii_if.phy_id_mask = 0x1f;
|
|
np->mii_if.reg_num_mask = 0x1f;
|
|
|
|
/* The chip-specific entries in the device structure. */
|
|
dev->netdev_ops = &netdev_ops;
|
|
SET_ETHTOOL_OPS(dev, ðtool_ops);
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
i = register_netdev(dev);
|
|
if (i)
|
|
goto err_out_unmap_rx;
|
|
|
|
printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n",
|
|
dev->name, pci_id_tbl[chip_idx].name, ioaddr,
|
|
dev->dev_addr, irq);
|
|
|
|
np->phys[0] = 1; /* Default setting */
|
|
np->mii_preamble_required++;
|
|
|
|
/*
|
|
* It seems some phys doesn't deal well with address 0 being accessed
|
|
* first
|
|
*/
|
|
if (sundance_pci_tbl[np->chip_id].device == 0x0200) {
|
|
phy = 0;
|
|
phy_end = 31;
|
|
} else {
|
|
phy = 1;
|
|
phy_end = 32; /* wraps to zero, due to 'phy & 0x1f' */
|
|
}
|
|
for (; phy <= phy_end && phy_idx < MII_CNT; phy++) {
|
|
int phyx = phy & 0x1f;
|
|
int mii_status = mdio_read(dev, phyx, MII_BMSR);
|
|
if (mii_status != 0xffff && mii_status != 0x0000) {
|
|
np->phys[phy_idx++] = phyx;
|
|
np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE);
|
|
if ((mii_status & 0x0040) == 0)
|
|
np->mii_preamble_required++;
|
|
printk(KERN_INFO "%s: MII PHY found at address %d, status "
|
|
"0x%4.4x advertising %4.4x.\n",
|
|
dev->name, phyx, mii_status, np->mii_if.advertising);
|
|
}
|
|
}
|
|
np->mii_preamble_required--;
|
|
|
|
if (phy_idx == 0) {
|
|
printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n",
|
|
dev->name, ioread32(ioaddr + ASICCtrl));
|
|
goto err_out_unregister;
|
|
}
|
|
|
|
np->mii_if.phy_id = np->phys[0];
|
|
|
|
/* Parse override configuration */
|
|
np->an_enable = 1;
|
|
if (card_idx < MAX_UNITS) {
|
|
if (media[card_idx] != NULL) {
|
|
np->an_enable = 0;
|
|
if (strcmp (media[card_idx], "100mbps_fd") == 0 ||
|
|
strcmp (media[card_idx], "4") == 0) {
|
|
np->speed = 100;
|
|
np->mii_if.full_duplex = 1;
|
|
} else if (strcmp (media[card_idx], "100mbps_hd") == 0 ||
|
|
strcmp (media[card_idx], "3") == 0) {
|
|
np->speed = 100;
|
|
np->mii_if.full_duplex = 0;
|
|
} else if (strcmp (media[card_idx], "10mbps_fd") == 0 ||
|
|
strcmp (media[card_idx], "2") == 0) {
|
|
np->speed = 10;
|
|
np->mii_if.full_duplex = 1;
|
|
} else if (strcmp (media[card_idx], "10mbps_hd") == 0 ||
|
|
strcmp (media[card_idx], "1") == 0) {
|
|
np->speed = 10;
|
|
np->mii_if.full_duplex = 0;
|
|
} else {
|
|
np->an_enable = 1;
|
|
}
|
|
}
|
|
if (flowctrl == 1)
|
|
np->flowctrl = 1;
|
|
}
|
|
|
|
/* Fibre PHY? */
|
|
if (ioread32 (ioaddr + ASICCtrl) & 0x80) {
|
|
/* Default 100Mbps Full */
|
|
if (np->an_enable) {
|
|
np->speed = 100;
|
|
np->mii_if.full_duplex = 1;
|
|
np->an_enable = 0;
|
|
}
|
|
}
|
|
/* Reset PHY */
|
|
mdio_write (dev, np->phys[0], MII_BMCR, BMCR_RESET);
|
|
mdelay (300);
|
|
/* If flow control enabled, we need to advertise it.*/
|
|
if (np->flowctrl)
|
|
mdio_write (dev, np->phys[0], MII_ADVERTISE, np->mii_if.advertising | 0x0400);
|
|
mdio_write (dev, np->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
|
|
/* Force media type */
|
|
if (!np->an_enable) {
|
|
mii_ctl = 0;
|
|
mii_ctl |= (np->speed == 100) ? BMCR_SPEED100 : 0;
|
|
mii_ctl |= (np->mii_if.full_duplex) ? BMCR_FULLDPLX : 0;
|
|
mdio_write (dev, np->phys[0], MII_BMCR, mii_ctl);
|
|
printk (KERN_INFO "Override speed=%d, %s duplex\n",
|
|
np->speed, np->mii_if.full_duplex ? "Full" : "Half");
|
|
|
|
}
|
|
|
|
/* Perhaps move the reset here? */
|
|
/* Reset the chip to erase previous misconfiguration. */
|
|
if (netif_msg_hw(np))
|
|
printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl));
|
|
sundance_reset(dev, 0x00ff << 16);
|
|
if (netif_msg_hw(np))
|
|
printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl));
|
|
|
|
card_idx++;
|
|
return 0;
|
|
|
|
err_out_unregister:
|
|
unregister_netdev(dev);
|
|
err_out_unmap_rx:
|
|
dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE,
|
|
np->rx_ring, np->rx_ring_dma);
|
|
err_out_unmap_tx:
|
|
dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE,
|
|
np->tx_ring, np->tx_ring_dma);
|
|
err_out_cleardev:
|
|
pci_set_drvdata(pdev, NULL);
|
|
pci_iounmap(pdev, ioaddr);
|
|
err_out_res:
|
|
pci_release_regions(pdev);
|
|
err_out_netdev:
|
|
free_netdev (dev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
if ((new_mtu < 68) || (new_mtu > 8191)) /* Set by RxDMAFrameLen */
|
|
return -EINVAL;
|
|
if (netif_running(dev))
|
|
return -EBUSY;
|
|
dev->mtu = new_mtu;
|
|
return 0;
|
|
}
|
|
|
|
#define eeprom_delay(ee_addr) ioread32(ee_addr)
|
|
/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. */
|
|
static int __devinit eeprom_read(void __iomem *ioaddr, int location)
|
|
{
|
|
int boguscnt = 10000; /* Typical 1900 ticks. */
|
|
iowrite16(0x0200 | (location & 0xff), ioaddr + EECtrl);
|
|
do {
|
|
eeprom_delay(ioaddr + EECtrl);
|
|
if (! (ioread16(ioaddr + EECtrl) & 0x8000)) {
|
|
return ioread16(ioaddr + EEData);
|
|
}
|
|
} while (--boguscnt > 0);
|
|
return 0;
|
|
}
|
|
|
|
/* MII transceiver control section.
|
|
Read and write the MII registers using software-generated serial
|
|
MDIO protocol. See the MII specifications or DP83840A data sheet
|
|
for details.
|
|
|
|
The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
|
|
met by back-to-back 33Mhz PCI cycles. */
|
|
#define mdio_delay() ioread8(mdio_addr)
|
|
|
|
enum mii_reg_bits {
|
|
MDIO_ShiftClk=0x0001, MDIO_Data=0x0002, MDIO_EnbOutput=0x0004,
|
|
};
|
|
#define MDIO_EnbIn (0)
|
|
#define MDIO_WRITE0 (MDIO_EnbOutput)
|
|
#define MDIO_WRITE1 (MDIO_Data | MDIO_EnbOutput)
|
|
|
|
/* Generate the preamble required for initial synchronization and
|
|
a few older transceivers. */
|
|
static void mdio_sync(void __iomem *mdio_addr)
|
|
{
|
|
int bits = 32;
|
|
|
|
/* Establish sync by sending at least 32 logic ones. */
|
|
while (--bits >= 0) {
|
|
iowrite8(MDIO_WRITE1, mdio_addr);
|
|
mdio_delay();
|
|
iowrite8(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
}
|
|
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *mdio_addr = np->base + MIICtrl;
|
|
int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
|
|
int i, retval = 0;
|
|
|
|
if (np->mii_preamble_required)
|
|
mdio_sync(mdio_addr);
|
|
|
|
/* Shift the read command bits out. */
|
|
for (i = 15; i >= 0; i--) {
|
|
int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
|
|
|
|
iowrite8(dataval, mdio_addr);
|
|
mdio_delay();
|
|
iowrite8(dataval | MDIO_ShiftClk, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
/* Read the two transition, 16 data, and wire-idle bits. */
|
|
for (i = 19; i > 0; i--) {
|
|
iowrite8(MDIO_EnbIn, mdio_addr);
|
|
mdio_delay();
|
|
retval = (retval << 1) | ((ioread8(mdio_addr) & MDIO_Data) ? 1 : 0);
|
|
iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
return (retval>>1) & 0xffff;
|
|
}
|
|
|
|
static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *mdio_addr = np->base + MIICtrl;
|
|
int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value;
|
|
int i;
|
|
|
|
if (np->mii_preamble_required)
|
|
mdio_sync(mdio_addr);
|
|
|
|
/* Shift the command bits out. */
|
|
for (i = 31; i >= 0; i--) {
|
|
int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
|
|
|
|
iowrite8(dataval, mdio_addr);
|
|
mdio_delay();
|
|
iowrite8(dataval | MDIO_ShiftClk, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
/* Clear out extra bits. */
|
|
for (i = 2; i > 0; i--) {
|
|
iowrite8(MDIO_EnbIn, mdio_addr);
|
|
mdio_delay();
|
|
iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
|
|
mdio_delay();
|
|
}
|
|
}
|
|
|
|
static int mdio_wait_link(struct net_device *dev, int wait)
|
|
{
|
|
int bmsr;
|
|
int phy_id;
|
|
struct netdev_private *np;
|
|
|
|
np = netdev_priv(dev);
|
|
phy_id = np->phys[0];
|
|
|
|
do {
|
|
bmsr = mdio_read(dev, phy_id, MII_BMSR);
|
|
if (bmsr & 0x0004)
|
|
return 0;
|
|
mdelay(1);
|
|
} while (--wait > 0);
|
|
return -1;
|
|
}
|
|
|
|
static int netdev_open(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
/* Do we need to reset the chip??? */
|
|
|
|
i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev);
|
|
if (i)
|
|
return i;
|
|
|
|
if (netif_msg_ifup(np))
|
|
printk(KERN_DEBUG "%s: netdev_open() irq %d.\n",
|
|
dev->name, dev->irq);
|
|
init_ring(dev);
|
|
|
|
iowrite32(np->rx_ring_dma, ioaddr + RxListPtr);
|
|
/* The Tx list pointer is written as packets are queued. */
|
|
|
|
/* Initialize other registers. */
|
|
__set_mac_addr(dev);
|
|
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
|
|
iowrite16(dev->mtu + 18, ioaddr + MaxFrameSize);
|
|
#else
|
|
iowrite16(dev->mtu + 14, ioaddr + MaxFrameSize);
|
|
#endif
|
|
if (dev->mtu > 2047)
|
|
iowrite32(ioread32(ioaddr + ASICCtrl) | 0x0C, ioaddr + ASICCtrl);
|
|
|
|
/* Configure the PCI bus bursts and FIFO thresholds. */
|
|
|
|
if (dev->if_port == 0)
|
|
dev->if_port = np->default_port;
|
|
|
|
spin_lock_init(&np->mcastlock);
|
|
|
|
set_rx_mode(dev);
|
|
iowrite16(0, ioaddr + IntrEnable);
|
|
iowrite16(0, ioaddr + DownCounter);
|
|
/* Set the chip to poll every N*320nsec. */
|
|
iowrite8(100, ioaddr + RxDMAPollPeriod);
|
|
iowrite8(127, ioaddr + TxDMAPollPeriod);
|
|
/* Fix DFE-580TX packet drop issue */
|
|
if (np->pci_dev->revision >= 0x14)
|
|
iowrite8(0x01, ioaddr + DebugCtrl1);
|
|
netif_start_queue(dev);
|
|
|
|
spin_lock_irqsave(&np->lock, flags);
|
|
reset_tx(dev);
|
|
spin_unlock_irqrestore(&np->lock, flags);
|
|
|
|
iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1);
|
|
|
|
if (netif_msg_ifup(np))
|
|
printk(KERN_DEBUG "%s: Done netdev_open(), status: Rx %x Tx %x "
|
|
"MAC Control %x, %4.4x %4.4x.\n",
|
|
dev->name, ioread32(ioaddr + RxStatus), ioread8(ioaddr + TxStatus),
|
|
ioread32(ioaddr + MACCtrl0),
|
|
ioread16(ioaddr + MACCtrl1), ioread16(ioaddr + MACCtrl0));
|
|
|
|
/* Set the timer to check for link beat. */
|
|
init_timer(&np->timer);
|
|
np->timer.expires = jiffies + 3*HZ;
|
|
np->timer.data = (unsigned long)dev;
|
|
np->timer.function = netdev_timer; /* timer handler */
|
|
add_timer(&np->timer);
|
|
|
|
/* Enable interrupts by setting the interrupt mask. */
|
|
iowrite16(DEFAULT_INTR, ioaddr + IntrEnable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void check_duplex(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
int mii_lpa = mdio_read(dev, np->phys[0], MII_LPA);
|
|
int negotiated = mii_lpa & np->mii_if.advertising;
|
|
int duplex;
|
|
|
|
/* Force media */
|
|
if (!np->an_enable || mii_lpa == 0xffff) {
|
|
if (np->mii_if.full_duplex)
|
|
iowrite16 (ioread16 (ioaddr + MACCtrl0) | EnbFullDuplex,
|
|
ioaddr + MACCtrl0);
|
|
return;
|
|
}
|
|
|
|
/* Autonegotiation */
|
|
duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040;
|
|
if (np->mii_if.full_duplex != duplex) {
|
|
np->mii_if.full_duplex = duplex;
|
|
if (netif_msg_link(np))
|
|
printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d "
|
|
"negotiated capability %4.4x.\n", dev->name,
|
|
duplex ? "full" : "half", np->phys[0], negotiated);
|
|
iowrite16(ioread16(ioaddr + MACCtrl0) | (duplex ? 0x20 : 0), ioaddr + MACCtrl0);
|
|
}
|
|
}
|
|
|
|
static void netdev_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
int next_tick = 10*HZ;
|
|
|
|
if (netif_msg_timer(np)) {
|
|
printk(KERN_DEBUG "%s: Media selection timer tick, intr status %4.4x, "
|
|
"Tx %x Rx %x.\n",
|
|
dev->name, ioread16(ioaddr + IntrEnable),
|
|
ioread8(ioaddr + TxStatus), ioread32(ioaddr + RxStatus));
|
|
}
|
|
check_duplex(dev);
|
|
np->timer.expires = jiffies + next_tick;
|
|
add_timer(&np->timer);
|
|
}
|
|
|
|
static void tx_timeout(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
unsigned long flag;
|
|
|
|
netif_stop_queue(dev);
|
|
tasklet_disable(&np->tx_tasklet);
|
|
iowrite16(0, ioaddr + IntrEnable);
|
|
printk(KERN_WARNING "%s: Transmit timed out, TxStatus %2.2x "
|
|
"TxFrameId %2.2x,"
|
|
" resetting...\n", dev->name, ioread8(ioaddr + TxStatus),
|
|
ioread8(ioaddr + TxFrameId));
|
|
|
|
{
|
|
int i;
|
|
for (i=0; i<TX_RING_SIZE; i++) {
|
|
printk(KERN_DEBUG "%02x %08llx %08x %08x(%02x) %08x %08x\n", i,
|
|
(unsigned long long)(np->tx_ring_dma + i*sizeof(*np->tx_ring)),
|
|
le32_to_cpu(np->tx_ring[i].next_desc),
|
|
le32_to_cpu(np->tx_ring[i].status),
|
|
(le32_to_cpu(np->tx_ring[i].status) >> 2) & 0xff,
|
|
le32_to_cpu(np->tx_ring[i].frag[0].addr),
|
|
le32_to_cpu(np->tx_ring[i].frag[0].length));
|
|
}
|
|
printk(KERN_DEBUG "TxListPtr=%08x netif_queue_stopped=%d\n",
|
|
ioread32(np->base + TxListPtr),
|
|
netif_queue_stopped(dev));
|
|
printk(KERN_DEBUG "cur_tx=%d(%02x) dirty_tx=%d(%02x)\n",
|
|
np->cur_tx, np->cur_tx % TX_RING_SIZE,
|
|
np->dirty_tx, np->dirty_tx % TX_RING_SIZE);
|
|
printk(KERN_DEBUG "cur_rx=%d dirty_rx=%d\n", np->cur_rx, np->dirty_rx);
|
|
printk(KERN_DEBUG "cur_task=%d\n", np->cur_task);
|
|
}
|
|
spin_lock_irqsave(&np->lock, flag);
|
|
|
|
/* Stop and restart the chip's Tx processes . */
|
|
reset_tx(dev);
|
|
spin_unlock_irqrestore(&np->lock, flag);
|
|
|
|
dev->if_port = 0;
|
|
|
|
dev->trans_start = jiffies; /* prevent tx timeout */
|
|
dev->stats.tx_errors++;
|
|
if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
|
|
netif_wake_queue(dev);
|
|
}
|
|
iowrite16(DEFAULT_INTR, ioaddr + IntrEnable);
|
|
tasklet_enable(&np->tx_tasklet);
|
|
}
|
|
|
|
|
|
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
|
|
static void init_ring(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int i;
|
|
|
|
np->cur_rx = np->cur_tx = 0;
|
|
np->dirty_rx = np->dirty_tx = 0;
|
|
np->cur_task = 0;
|
|
|
|
np->rx_buf_sz = (dev->mtu <= 1520 ? PKT_BUF_SZ : dev->mtu + 16);
|
|
|
|
/* Initialize all Rx descriptors. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
np->rx_ring[i].next_desc = cpu_to_le32(np->rx_ring_dma +
|
|
((i+1)%RX_RING_SIZE)*sizeof(*np->rx_ring));
|
|
np->rx_ring[i].status = 0;
|
|
np->rx_ring[i].frag[0].length = 0;
|
|
np->rx_skbuff[i] = NULL;
|
|
}
|
|
|
|
/* Fill in the Rx buffers. Handle allocation failure gracefully. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
|
|
np->rx_skbuff[i] = skb;
|
|
if (skb == NULL)
|
|
break;
|
|
skb->dev = dev; /* Mark as being used by this device. */
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header. */
|
|
np->rx_ring[i].frag[0].addr = cpu_to_le32(
|
|
dma_map_single(&np->pci_dev->dev, skb->data,
|
|
np->rx_buf_sz, DMA_FROM_DEVICE));
|
|
if (dma_mapping_error(&np->pci_dev->dev,
|
|
np->rx_ring[i].frag[0].addr)) {
|
|
dev_kfree_skb(skb);
|
|
np->rx_skbuff[i] = NULL;
|
|
break;
|
|
}
|
|
np->rx_ring[i].frag[0].length = cpu_to_le32(np->rx_buf_sz | LastFrag);
|
|
}
|
|
np->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
|
|
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
np->tx_skbuff[i] = NULL;
|
|
np->tx_ring[i].status = 0;
|
|
}
|
|
}
|
|
|
|
static void tx_poll (unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
unsigned head = np->cur_task % TX_RING_SIZE;
|
|
struct netdev_desc *txdesc =
|
|
&np->tx_ring[(np->cur_tx - 1) % TX_RING_SIZE];
|
|
|
|
/* Chain the next pointer */
|
|
for (; np->cur_tx - np->cur_task > 0; np->cur_task++) {
|
|
int entry = np->cur_task % TX_RING_SIZE;
|
|
txdesc = &np->tx_ring[entry];
|
|
if (np->last_tx) {
|
|
np->last_tx->next_desc = cpu_to_le32(np->tx_ring_dma +
|
|
entry*sizeof(struct netdev_desc));
|
|
}
|
|
np->last_tx = txdesc;
|
|
}
|
|
/* Indicate the latest descriptor of tx ring */
|
|
txdesc->status |= cpu_to_le32(DescIntrOnTx);
|
|
|
|
if (ioread32 (np->base + TxListPtr) == 0)
|
|
iowrite32 (np->tx_ring_dma + head * sizeof(struct netdev_desc),
|
|
np->base + TxListPtr);
|
|
}
|
|
|
|
static netdev_tx_t
|
|
start_tx (struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
struct netdev_desc *txdesc;
|
|
unsigned entry;
|
|
|
|
/* Calculate the next Tx descriptor entry. */
|
|
entry = np->cur_tx % TX_RING_SIZE;
|
|
np->tx_skbuff[entry] = skb;
|
|
txdesc = &np->tx_ring[entry];
|
|
|
|
txdesc->next_desc = 0;
|
|
txdesc->status = cpu_to_le32 ((entry << 2) | DisableAlign);
|
|
txdesc->frag[0].addr = cpu_to_le32(dma_map_single(&np->pci_dev->dev,
|
|
skb->data, skb->len, DMA_TO_DEVICE));
|
|
if (dma_mapping_error(&np->pci_dev->dev,
|
|
txdesc->frag[0].addr))
|
|
goto drop_frame;
|
|
txdesc->frag[0].length = cpu_to_le32 (skb->len | LastFrag);
|
|
|
|
/* Increment cur_tx before tasklet_schedule() */
|
|
np->cur_tx++;
|
|
mb();
|
|
/* Schedule a tx_poll() task */
|
|
tasklet_schedule(&np->tx_tasklet);
|
|
|
|
/* On some architectures: explicitly flush cache lines here. */
|
|
if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 1 &&
|
|
!netif_queue_stopped(dev)) {
|
|
/* do nothing */
|
|
} else {
|
|
netif_stop_queue (dev);
|
|
}
|
|
if (netif_msg_tx_queued(np)) {
|
|
printk (KERN_DEBUG
|
|
"%s: Transmit frame #%d queued in slot %d.\n",
|
|
dev->name, np->cur_tx, entry);
|
|
}
|
|
return NETDEV_TX_OK;
|
|
|
|
drop_frame:
|
|
dev_kfree_skb(skb);
|
|
np->tx_skbuff[entry] = NULL;
|
|
dev->stats.tx_dropped++;
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Reset hardware tx and free all of tx buffers */
|
|
static int
|
|
reset_tx (struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
/* Reset tx logic, TxListPtr will be cleaned */
|
|
iowrite16 (TxDisable, ioaddr + MACCtrl1);
|
|
sundance_reset(dev, (NetworkReset|FIFOReset|DMAReset|TxReset) << 16);
|
|
|
|
/* free all tx skbuff */
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
np->tx_ring[i].next_desc = 0;
|
|
|
|
skb = np->tx_skbuff[i];
|
|
if (skb) {
|
|
dma_unmap_single(&np->pci_dev->dev,
|
|
le32_to_cpu(np->tx_ring[i].frag[0].addr),
|
|
skb->len, DMA_TO_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
np->tx_skbuff[i] = NULL;
|
|
dev->stats.tx_dropped++;
|
|
}
|
|
}
|
|
np->cur_tx = np->dirty_tx = 0;
|
|
np->cur_task = 0;
|
|
|
|
np->last_tx = NULL;
|
|
iowrite8(127, ioaddr + TxDMAPollPeriod);
|
|
|
|
iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1);
|
|
return 0;
|
|
}
|
|
|
|
/* The interrupt handler cleans up after the Tx thread,
|
|
and schedule a Rx thread work */
|
|
static irqreturn_t intr_handler(int irq, void *dev_instance)
|
|
{
|
|
struct net_device *dev = (struct net_device *)dev_instance;
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
int hw_frame_id;
|
|
int tx_cnt;
|
|
int tx_status;
|
|
int handled = 0;
|
|
int i;
|
|
|
|
|
|
do {
|
|
int intr_status = ioread16(ioaddr + IntrStatus);
|
|
iowrite16(intr_status, ioaddr + IntrStatus);
|
|
|
|
if (netif_msg_intr(np))
|
|
printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n",
|
|
dev->name, intr_status);
|
|
|
|
if (!(intr_status & DEFAULT_INTR))
|
|
break;
|
|
|
|
handled = 1;
|
|
|
|
if (intr_status & (IntrRxDMADone)) {
|
|
iowrite16(DEFAULT_INTR & ~(IntrRxDone|IntrRxDMADone),
|
|
ioaddr + IntrEnable);
|
|
if (np->budget < 0)
|
|
np->budget = RX_BUDGET;
|
|
tasklet_schedule(&np->rx_tasklet);
|
|
}
|
|
if (intr_status & (IntrTxDone | IntrDrvRqst)) {
|
|
tx_status = ioread16 (ioaddr + TxStatus);
|
|
for (tx_cnt=32; tx_status & 0x80; --tx_cnt) {
|
|
if (netif_msg_tx_done(np))
|
|
printk
|
|
("%s: Transmit status is %2.2x.\n",
|
|
dev->name, tx_status);
|
|
if (tx_status & 0x1e) {
|
|
if (netif_msg_tx_err(np))
|
|
printk("%s: Transmit error status %4.4x.\n",
|
|
dev->name, tx_status);
|
|
dev->stats.tx_errors++;
|
|
if (tx_status & 0x10)
|
|
dev->stats.tx_fifo_errors++;
|
|
if (tx_status & 0x08)
|
|
dev->stats.collisions++;
|
|
if (tx_status & 0x04)
|
|
dev->stats.tx_fifo_errors++;
|
|
if (tx_status & 0x02)
|
|
dev->stats.tx_window_errors++;
|
|
|
|
/*
|
|
** This reset has been verified on
|
|
** DFE-580TX boards ! phdm@macqel.be.
|
|
*/
|
|
if (tx_status & 0x10) { /* TxUnderrun */
|
|
/* Restart Tx FIFO and transmitter */
|
|
sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16);
|
|
/* No need to reset the Tx pointer here */
|
|
}
|
|
/* Restart the Tx. Need to make sure tx enabled */
|
|
i = 10;
|
|
do {
|
|
iowrite16(ioread16(ioaddr + MACCtrl1) | TxEnable, ioaddr + MACCtrl1);
|
|
if (ioread16(ioaddr + MACCtrl1) & TxEnabled)
|
|
break;
|
|
mdelay(1);
|
|
} while (--i);
|
|
}
|
|
/* Yup, this is a documentation bug. It cost me *hours*. */
|
|
iowrite16 (0, ioaddr + TxStatus);
|
|
if (tx_cnt < 0) {
|
|
iowrite32(5000, ioaddr + DownCounter);
|
|
break;
|
|
}
|
|
tx_status = ioread16 (ioaddr + TxStatus);
|
|
}
|
|
hw_frame_id = (tx_status >> 8) & 0xff;
|
|
} else {
|
|
hw_frame_id = ioread8(ioaddr + TxFrameId);
|
|
}
|
|
|
|
if (np->pci_dev->revision >= 0x14) {
|
|
spin_lock(&np->lock);
|
|
for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
|
|
int entry = np->dirty_tx % TX_RING_SIZE;
|
|
struct sk_buff *skb;
|
|
int sw_frame_id;
|
|
sw_frame_id = (le32_to_cpu(
|
|
np->tx_ring[entry].status) >> 2) & 0xff;
|
|
if (sw_frame_id == hw_frame_id &&
|
|
!(le32_to_cpu(np->tx_ring[entry].status)
|
|
& 0x00010000))
|
|
break;
|
|
if (sw_frame_id == (hw_frame_id + 1) %
|
|
TX_RING_SIZE)
|
|
break;
|
|
skb = np->tx_skbuff[entry];
|
|
/* Free the original skb. */
|
|
dma_unmap_single(&np->pci_dev->dev,
|
|
le32_to_cpu(np->tx_ring[entry].frag[0].addr),
|
|
skb->len, DMA_TO_DEVICE);
|
|
dev_kfree_skb_irq (np->tx_skbuff[entry]);
|
|
np->tx_skbuff[entry] = NULL;
|
|
np->tx_ring[entry].frag[0].addr = 0;
|
|
np->tx_ring[entry].frag[0].length = 0;
|
|
}
|
|
spin_unlock(&np->lock);
|
|
} else {
|
|
spin_lock(&np->lock);
|
|
for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
|
|
int entry = np->dirty_tx % TX_RING_SIZE;
|
|
struct sk_buff *skb;
|
|
if (!(le32_to_cpu(np->tx_ring[entry].status)
|
|
& 0x00010000))
|
|
break;
|
|
skb = np->tx_skbuff[entry];
|
|
/* Free the original skb. */
|
|
dma_unmap_single(&np->pci_dev->dev,
|
|
le32_to_cpu(np->tx_ring[entry].frag[0].addr),
|
|
skb->len, DMA_TO_DEVICE);
|
|
dev_kfree_skb_irq (np->tx_skbuff[entry]);
|
|
np->tx_skbuff[entry] = NULL;
|
|
np->tx_ring[entry].frag[0].addr = 0;
|
|
np->tx_ring[entry].frag[0].length = 0;
|
|
}
|
|
spin_unlock(&np->lock);
|
|
}
|
|
|
|
if (netif_queue_stopped(dev) &&
|
|
np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
|
|
/* The ring is no longer full, clear busy flag. */
|
|
netif_wake_queue (dev);
|
|
}
|
|
/* Abnormal error summary/uncommon events handlers. */
|
|
if (intr_status & (IntrPCIErr | LinkChange | StatsMax))
|
|
netdev_error(dev, intr_status);
|
|
} while (0);
|
|
if (netif_msg_intr(np))
|
|
printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
|
|
dev->name, ioread16(ioaddr + IntrStatus));
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void rx_poll(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int entry = np->cur_rx % RX_RING_SIZE;
|
|
int boguscnt = np->budget;
|
|
void __iomem *ioaddr = np->base;
|
|
int received = 0;
|
|
|
|
/* If EOP is set on the next entry, it's a new packet. Send it up. */
|
|
while (1) {
|
|
struct netdev_desc *desc = &(np->rx_ring[entry]);
|
|
u32 frame_status = le32_to_cpu(desc->status);
|
|
int pkt_len;
|
|
|
|
if (--boguscnt < 0) {
|
|
goto not_done;
|
|
}
|
|
if (!(frame_status & DescOwn))
|
|
break;
|
|
pkt_len = frame_status & 0x1fff; /* Chip omits the CRC. */
|
|
if (netif_msg_rx_status(np))
|
|
printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n",
|
|
frame_status);
|
|
if (frame_status & 0x001f4000) {
|
|
/* There was a error. */
|
|
if (netif_msg_rx_err(np))
|
|
printk(KERN_DEBUG " netdev_rx() Rx error was %8.8x.\n",
|
|
frame_status);
|
|
dev->stats.rx_errors++;
|
|
if (frame_status & 0x00100000)
|
|
dev->stats.rx_length_errors++;
|
|
if (frame_status & 0x00010000)
|
|
dev->stats.rx_fifo_errors++;
|
|
if (frame_status & 0x00060000)
|
|
dev->stats.rx_frame_errors++;
|
|
if (frame_status & 0x00080000)
|
|
dev->stats.rx_crc_errors++;
|
|
if (frame_status & 0x00100000) {
|
|
printk(KERN_WARNING "%s: Oversized Ethernet frame,"
|
|
" status %8.8x.\n",
|
|
dev->name, frame_status);
|
|
}
|
|
} else {
|
|
struct sk_buff *skb;
|
|
#ifndef final_version
|
|
if (netif_msg_rx_status(np))
|
|
printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d"
|
|
", bogus_cnt %d.\n",
|
|
pkt_len, boguscnt);
|
|
#endif
|
|
/* Check if the packet is long enough to accept without copying
|
|
to a minimally-sized skbuff. */
|
|
if (pkt_len < rx_copybreak &&
|
|
(skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header */
|
|
dma_sync_single_for_cpu(&np->pci_dev->dev,
|
|
le32_to_cpu(desc->frag[0].addr),
|
|
np->rx_buf_sz, DMA_FROM_DEVICE);
|
|
skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len);
|
|
dma_sync_single_for_device(&np->pci_dev->dev,
|
|
le32_to_cpu(desc->frag[0].addr),
|
|
np->rx_buf_sz, DMA_FROM_DEVICE);
|
|
skb_put(skb, pkt_len);
|
|
} else {
|
|
dma_unmap_single(&np->pci_dev->dev,
|
|
le32_to_cpu(desc->frag[0].addr),
|
|
np->rx_buf_sz, DMA_FROM_DEVICE);
|
|
skb_put(skb = np->rx_skbuff[entry], pkt_len);
|
|
np->rx_skbuff[entry] = NULL;
|
|
}
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
/* Note: checksum -> skb->ip_summed = CHECKSUM_UNNECESSARY; */
|
|
netif_rx(skb);
|
|
}
|
|
entry = (entry + 1) % RX_RING_SIZE;
|
|
received++;
|
|
}
|
|
np->cur_rx = entry;
|
|
refill_rx (dev);
|
|
np->budget -= received;
|
|
iowrite16(DEFAULT_INTR, ioaddr + IntrEnable);
|
|
return;
|
|
|
|
not_done:
|
|
np->cur_rx = entry;
|
|
refill_rx (dev);
|
|
if (!received)
|
|
received = 1;
|
|
np->budget -= received;
|
|
if (np->budget <= 0)
|
|
np->budget = RX_BUDGET;
|
|
tasklet_schedule(&np->rx_tasklet);
|
|
}
|
|
|
|
static void refill_rx (struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int entry;
|
|
int cnt = 0;
|
|
|
|
/* Refill the Rx ring buffers. */
|
|
for (;(np->cur_rx - np->dirty_rx + RX_RING_SIZE) % RX_RING_SIZE > 0;
|
|
np->dirty_rx = (np->dirty_rx + 1) % RX_RING_SIZE) {
|
|
struct sk_buff *skb;
|
|
entry = np->dirty_rx % RX_RING_SIZE;
|
|
if (np->rx_skbuff[entry] == NULL) {
|
|
skb = dev_alloc_skb(np->rx_buf_sz);
|
|
np->rx_skbuff[entry] = skb;
|
|
if (skb == NULL)
|
|
break; /* Better luck next round. */
|
|
skb->dev = dev; /* Mark as being used by this device. */
|
|
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
|
|
np->rx_ring[entry].frag[0].addr = cpu_to_le32(
|
|
dma_map_single(&np->pci_dev->dev, skb->data,
|
|
np->rx_buf_sz, DMA_FROM_DEVICE));
|
|
if (dma_mapping_error(&np->pci_dev->dev,
|
|
np->rx_ring[entry].frag[0].addr)) {
|
|
dev_kfree_skb_irq(skb);
|
|
np->rx_skbuff[entry] = NULL;
|
|
break;
|
|
}
|
|
}
|
|
/* Perhaps we need not reset this field. */
|
|
np->rx_ring[entry].frag[0].length =
|
|
cpu_to_le32(np->rx_buf_sz | LastFrag);
|
|
np->rx_ring[entry].status = 0;
|
|
cnt++;
|
|
}
|
|
}
|
|
static void netdev_error(struct net_device *dev, int intr_status)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
u16 mii_ctl, mii_advertise, mii_lpa;
|
|
int speed;
|
|
|
|
if (intr_status & LinkChange) {
|
|
if (mdio_wait_link(dev, 10) == 0) {
|
|
printk(KERN_INFO "%s: Link up\n", dev->name);
|
|
if (np->an_enable) {
|
|
mii_advertise = mdio_read(dev, np->phys[0],
|
|
MII_ADVERTISE);
|
|
mii_lpa = mdio_read(dev, np->phys[0], MII_LPA);
|
|
mii_advertise &= mii_lpa;
|
|
printk(KERN_INFO "%s: Link changed: ",
|
|
dev->name);
|
|
if (mii_advertise & ADVERTISE_100FULL) {
|
|
np->speed = 100;
|
|
printk("100Mbps, full duplex\n");
|
|
} else if (mii_advertise & ADVERTISE_100HALF) {
|
|
np->speed = 100;
|
|
printk("100Mbps, half duplex\n");
|
|
} else if (mii_advertise & ADVERTISE_10FULL) {
|
|
np->speed = 10;
|
|
printk("10Mbps, full duplex\n");
|
|
} else if (mii_advertise & ADVERTISE_10HALF) {
|
|
np->speed = 10;
|
|
printk("10Mbps, half duplex\n");
|
|
} else
|
|
printk("\n");
|
|
|
|
} else {
|
|
mii_ctl = mdio_read(dev, np->phys[0], MII_BMCR);
|
|
speed = (mii_ctl & BMCR_SPEED100) ? 100 : 10;
|
|
np->speed = speed;
|
|
printk(KERN_INFO "%s: Link changed: %dMbps ,",
|
|
dev->name, speed);
|
|
printk("%s duplex.\n",
|
|
(mii_ctl & BMCR_FULLDPLX) ?
|
|
"full" : "half");
|
|
}
|
|
check_duplex(dev);
|
|
if (np->flowctrl && np->mii_if.full_duplex) {
|
|
iowrite16(ioread16(ioaddr + MulticastFilter1+2) | 0x0200,
|
|
ioaddr + MulticastFilter1+2);
|
|
iowrite16(ioread16(ioaddr + MACCtrl0) | EnbFlowCtrl,
|
|
ioaddr + MACCtrl0);
|
|
}
|
|
netif_carrier_on(dev);
|
|
} else {
|
|
printk(KERN_INFO "%s: Link down\n", dev->name);
|
|
netif_carrier_off(dev);
|
|
}
|
|
}
|
|
if (intr_status & StatsMax) {
|
|
get_stats(dev);
|
|
}
|
|
if (intr_status & IntrPCIErr) {
|
|
printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
|
|
dev->name, intr_status);
|
|
/* We must do a global reset of DMA to continue. */
|
|
}
|
|
}
|
|
|
|
static struct net_device_stats *get_stats(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
unsigned long flags;
|
|
u8 late_coll, single_coll, mult_coll;
|
|
|
|
spin_lock_irqsave(&np->statlock, flags);
|
|
/* The chip only need report frame silently dropped. */
|
|
dev->stats.rx_missed_errors += ioread8(ioaddr + RxMissed);
|
|
dev->stats.tx_packets += ioread16(ioaddr + TxFramesOK);
|
|
dev->stats.rx_packets += ioread16(ioaddr + RxFramesOK);
|
|
dev->stats.tx_carrier_errors += ioread8(ioaddr + StatsCarrierError);
|
|
|
|
mult_coll = ioread8(ioaddr + StatsMultiColl);
|
|
np->xstats.tx_multiple_collisions += mult_coll;
|
|
single_coll = ioread8(ioaddr + StatsOneColl);
|
|
np->xstats.tx_single_collisions += single_coll;
|
|
late_coll = ioread8(ioaddr + StatsLateColl);
|
|
np->xstats.tx_late_collisions += late_coll;
|
|
dev->stats.collisions += mult_coll
|
|
+ single_coll
|
|
+ late_coll;
|
|
|
|
np->xstats.tx_deferred += ioread8(ioaddr + StatsTxDefer);
|
|
np->xstats.tx_deferred_excessive += ioread8(ioaddr + StatsTxXSDefer);
|
|
np->xstats.tx_aborted += ioread8(ioaddr + StatsTxAbort);
|
|
np->xstats.tx_bcasts += ioread8(ioaddr + StatsBcastTx);
|
|
np->xstats.rx_bcasts += ioread8(ioaddr + StatsBcastRx);
|
|
np->xstats.tx_mcasts += ioread8(ioaddr + StatsMcastTx);
|
|
np->xstats.rx_mcasts += ioread8(ioaddr + StatsMcastRx);
|
|
|
|
dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsLow);
|
|
dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsHigh) << 16;
|
|
dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsLow);
|
|
dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsHigh) << 16;
|
|
|
|
spin_unlock_irqrestore(&np->statlock, flags);
|
|
|
|
return &dev->stats;
|
|
}
|
|
|
|
static void set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
u16 mc_filter[4]; /* Multicast hash filter */
|
|
u32 rx_mode;
|
|
int i;
|
|
|
|
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
|
|
memset(mc_filter, 0xff, sizeof(mc_filter));
|
|
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAll | AcceptMyPhys;
|
|
} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
|
|
(dev->flags & IFF_ALLMULTI)) {
|
|
/* Too many to match, or accept all multicasts. */
|
|
memset(mc_filter, 0xff, sizeof(mc_filter));
|
|
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
|
|
} else if (!netdev_mc_empty(dev)) {
|
|
struct netdev_hw_addr *ha;
|
|
int bit;
|
|
int index;
|
|
int crc;
|
|
memset (mc_filter, 0, sizeof (mc_filter));
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
crc = ether_crc_le(ETH_ALEN, ha->addr);
|
|
for (index=0, bit=0; bit < 6; bit++, crc <<= 1)
|
|
if (crc & 0x80000000) index |= 1 << bit;
|
|
mc_filter[index/16] |= (1 << (index % 16));
|
|
}
|
|
rx_mode = AcceptBroadcast | AcceptMultiHash | AcceptMyPhys;
|
|
} else {
|
|
iowrite8(AcceptBroadcast | AcceptMyPhys, ioaddr + RxMode);
|
|
return;
|
|
}
|
|
if (np->mii_if.full_duplex && np->flowctrl)
|
|
mc_filter[3] |= 0x0200;
|
|
|
|
for (i = 0; i < 4; i++)
|
|
iowrite16(mc_filter[i], ioaddr + MulticastFilter0 + i*2);
|
|
iowrite8(rx_mode, ioaddr + RxMode);
|
|
}
|
|
|
|
static int __set_mac_addr(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
u16 addr16;
|
|
|
|
addr16 = (dev->dev_addr[0] | (dev->dev_addr[1] << 8));
|
|
iowrite16(addr16, np->base + StationAddr);
|
|
addr16 = (dev->dev_addr[2] | (dev->dev_addr[3] << 8));
|
|
iowrite16(addr16, np->base + StationAddr+2);
|
|
addr16 = (dev->dev_addr[4] | (dev->dev_addr[5] << 8));
|
|
iowrite16(addr16, np->base + StationAddr+4);
|
|
return 0;
|
|
}
|
|
|
|
static const struct {
|
|
const char name[ETH_GSTRING_LEN];
|
|
} sundance_stats[] = {
|
|
{ "tx_multiple_collisions" },
|
|
{ "tx_single_collisions" },
|
|
{ "tx_late_collisions" },
|
|
{ "tx_deferred" },
|
|
{ "tx_deferred_excessive" },
|
|
{ "tx_aborted" },
|
|
{ "tx_bcasts" },
|
|
{ "rx_bcasts" },
|
|
{ "tx_mcasts" },
|
|
{ "rx_mcasts" },
|
|
};
|
|
|
|
static int check_if_running(struct net_device *dev)
|
|
{
|
|
if (!netif_running(dev))
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
strcpy(info->driver, DRV_NAME);
|
|
strcpy(info->version, DRV_VERSION);
|
|
strcpy(info->bus_info, pci_name(np->pci_dev));
|
|
}
|
|
|
|
static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
spin_lock_irq(&np->lock);
|
|
mii_ethtool_gset(&np->mii_if, ecmd);
|
|
spin_unlock_irq(&np->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int res;
|
|
spin_lock_irq(&np->lock);
|
|
res = mii_ethtool_sset(&np->mii_if, ecmd);
|
|
spin_unlock_irq(&np->lock);
|
|
return res;
|
|
}
|
|
|
|
static int nway_reset(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
return mii_nway_restart(&np->mii_if);
|
|
}
|
|
|
|
static u32 get_link(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
return mii_link_ok(&np->mii_if);
|
|
}
|
|
|
|
static u32 get_msglevel(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
return np->msg_enable;
|
|
}
|
|
|
|
static void set_msglevel(struct net_device *dev, u32 val)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
np->msg_enable = val;
|
|
}
|
|
|
|
static void get_strings(struct net_device *dev, u32 stringset,
|
|
u8 *data)
|
|
{
|
|
if (stringset == ETH_SS_STATS)
|
|
memcpy(data, sundance_stats, sizeof(sundance_stats));
|
|
}
|
|
|
|
static int get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
switch (sset) {
|
|
case ETH_SS_STATS:
|
|
return ARRAY_SIZE(sundance_stats);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int i = 0;
|
|
|
|
get_stats(dev);
|
|
data[i++] = np->xstats.tx_multiple_collisions;
|
|
data[i++] = np->xstats.tx_single_collisions;
|
|
data[i++] = np->xstats.tx_late_collisions;
|
|
data[i++] = np->xstats.tx_deferred;
|
|
data[i++] = np->xstats.tx_deferred_excessive;
|
|
data[i++] = np->xstats.tx_aborted;
|
|
data[i++] = np->xstats.tx_bcasts;
|
|
data[i++] = np->xstats.rx_bcasts;
|
|
data[i++] = np->xstats.tx_mcasts;
|
|
data[i++] = np->xstats.rx_mcasts;
|
|
}
|
|
|
|
static const struct ethtool_ops ethtool_ops = {
|
|
.begin = check_if_running,
|
|
.get_drvinfo = get_drvinfo,
|
|
.get_settings = get_settings,
|
|
.set_settings = set_settings,
|
|
.nway_reset = nway_reset,
|
|
.get_link = get_link,
|
|
.get_msglevel = get_msglevel,
|
|
.set_msglevel = set_msglevel,
|
|
.get_strings = get_strings,
|
|
.get_sset_count = get_sset_count,
|
|
.get_ethtool_stats = get_ethtool_stats,
|
|
};
|
|
|
|
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
int rc;
|
|
|
|
if (!netif_running(dev))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irq(&np->lock);
|
|
rc = generic_mii_ioctl(&np->mii_if, if_mii(rq), cmd, NULL);
|
|
spin_unlock_irq(&np->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int netdev_close(struct net_device *dev)
|
|
{
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
/* Wait and kill tasklet */
|
|
tasklet_kill(&np->rx_tasklet);
|
|
tasklet_kill(&np->tx_tasklet);
|
|
np->cur_tx = 0;
|
|
np->dirty_tx = 0;
|
|
np->cur_task = 0;
|
|
np->last_tx = NULL;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (netif_msg_ifdown(np)) {
|
|
printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %2.2x "
|
|
"Rx %4.4x Int %2.2x.\n",
|
|
dev->name, ioread8(ioaddr + TxStatus),
|
|
ioread32(ioaddr + RxStatus), ioread16(ioaddr + IntrStatus));
|
|
printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
|
|
dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx);
|
|
}
|
|
|
|
/* Disable interrupts by clearing the interrupt mask. */
|
|
iowrite16(0x0000, ioaddr + IntrEnable);
|
|
|
|
/* Disable Rx and Tx DMA for safely release resource */
|
|
iowrite32(0x500, ioaddr + DMACtrl);
|
|
|
|
/* Stop the chip's Tx and Rx processes. */
|
|
iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);
|
|
|
|
for (i = 2000; i > 0; i--) {
|
|
if ((ioread32(ioaddr + DMACtrl) & 0xc000) == 0)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
|
|
iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset,
|
|
ioaddr +ASICCtrl + 2);
|
|
|
|
for (i = 2000; i > 0; i--) {
|
|
if ((ioread16(ioaddr + ASICCtrl +2) & ResetBusy) == 0)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
|
|
#ifdef __i386__
|
|
if (netif_msg_hw(np)) {
|
|
printk(KERN_DEBUG " Tx ring at %8.8x:\n",
|
|
(int)(np->tx_ring_dma));
|
|
for (i = 0; i < TX_RING_SIZE; i++)
|
|
printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n",
|
|
i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr,
|
|
np->tx_ring[i].frag[0].length);
|
|
printk(KERN_DEBUG " Rx ring %8.8x:\n",
|
|
(int)(np->rx_ring_dma));
|
|
for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) {
|
|
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
|
|
i, np->rx_ring[i].status, np->rx_ring[i].frag[0].addr,
|
|
np->rx_ring[i].frag[0].length);
|
|
}
|
|
}
|
|
#endif /* __i386__ debugging only */
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
del_timer_sync(&np->timer);
|
|
|
|
/* Free all the skbuffs in the Rx queue. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
np->rx_ring[i].status = 0;
|
|
skb = np->rx_skbuff[i];
|
|
if (skb) {
|
|
dma_unmap_single(&np->pci_dev->dev,
|
|
le32_to_cpu(np->rx_ring[i].frag[0].addr),
|
|
np->rx_buf_sz, DMA_FROM_DEVICE);
|
|
dev_kfree_skb(skb);
|
|
np->rx_skbuff[i] = NULL;
|
|
}
|
|
np->rx_ring[i].frag[0].addr = cpu_to_le32(0xBADF00D0); /* poison */
|
|
}
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
np->tx_ring[i].next_desc = 0;
|
|
skb = np->tx_skbuff[i];
|
|
if (skb) {
|
|
dma_unmap_single(&np->pci_dev->dev,
|
|
le32_to_cpu(np->tx_ring[i].frag[0].addr),
|
|
skb->len, DMA_TO_DEVICE);
|
|
dev_kfree_skb(skb);
|
|
np->tx_skbuff[i] = NULL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __devexit sundance_remove1 (struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (dev) {
|
|
struct netdev_private *np = netdev_priv(dev);
|
|
unregister_netdev(dev);
|
|
dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE,
|
|
np->rx_ring, np->rx_ring_dma);
|
|
dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE,
|
|
np->tx_ring, np->tx_ring_dma);
|
|
pci_iounmap(pdev, np->base);
|
|
pci_release_regions(pdev);
|
|
free_netdev(dev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int sundance_suspend(struct pci_dev *pci_dev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pci_dev);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
netdev_close(dev);
|
|
netif_device_detach(dev);
|
|
|
|
pci_save_state(pci_dev);
|
|
pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sundance_resume(struct pci_dev *pci_dev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pci_dev);
|
|
int err = 0;
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
pci_set_power_state(pci_dev, PCI_D0);
|
|
pci_restore_state(pci_dev);
|
|
|
|
err = netdev_open(dev);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: Can't resume interface!\n",
|
|
dev->name);
|
|
goto out;
|
|
}
|
|
|
|
netif_device_attach(dev);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct pci_driver sundance_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sundance_pci_tbl,
|
|
.probe = sundance_probe1,
|
|
.remove = __devexit_p(sundance_remove1),
|
|
#ifdef CONFIG_PM
|
|
.suspend = sundance_suspend,
|
|
.resume = sundance_resume,
|
|
#endif /* CONFIG_PM */
|
|
};
|
|
|
|
static int __init sundance_init(void)
|
|
{
|
|
/* when a module, this is printed whether or not devices are found in probe */
|
|
#ifdef MODULE
|
|
printk(version);
|
|
#endif
|
|
return pci_register_driver(&sundance_driver);
|
|
}
|
|
|
|
static void __exit sundance_exit(void)
|
|
{
|
|
pci_unregister_driver(&sundance_driver);
|
|
}
|
|
|
|
module_init(sundance_init);
|
|
module_exit(sundance_exit);
|
|
|
|
|