mirror of
https://github.com/torvalds/linux.git
synced 2024-11-08 21:21:47 +00:00
66583c9fa6
The following commit was intended to fix problems with specific AHCI
controller(s) that would become bricks if the AHCI specification was not
followed strictly (that is, if ahci_start_engine() was called while the
controller was in the wrong state):
commit 7faa33da9b
ahci: start engine only during soft/hard resets
However, some devices currently have issues with that fix, so we must
implement a flag that delays the ahci_start_engine() call only for specific
controllers.
This commit simply introduces the flag, without enabling it in any driver.
Note that even when AHCI_HFLAG_DELAY_ENGINE is not enabled, this patch does
not constitue a full revert to commit 7faa33da; there is still a change in
behavior to the ahci_port_suspend() failure path.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org
2221 lines
57 KiB
C
2221 lines
57 KiB
C
/*
|
|
* libahci.c - Common AHCI SATA low-level routines
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2004-2005 Red Hat, Inc.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* AHCI hardware documentation:
|
|
* http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
|
|
* http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <linux/libata.h>
|
|
#include "ahci.h"
|
|
|
|
static int ahci_skip_host_reset;
|
|
int ahci_ignore_sss;
|
|
EXPORT_SYMBOL_GPL(ahci_ignore_sss);
|
|
|
|
module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
|
|
MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
|
|
|
|
module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
|
|
MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
|
|
|
|
static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
|
|
unsigned hints);
|
|
static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
|
|
static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
|
|
size_t size);
|
|
static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
|
|
ssize_t size);
|
|
|
|
|
|
|
|
static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
|
|
static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
|
|
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
|
|
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
|
|
static int ahci_port_start(struct ata_port *ap);
|
|
static void ahci_port_stop(struct ata_port *ap);
|
|
static void ahci_qc_prep(struct ata_queued_cmd *qc);
|
|
static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc);
|
|
static void ahci_freeze(struct ata_port *ap);
|
|
static void ahci_thaw(struct ata_port *ap);
|
|
static void ahci_enable_fbs(struct ata_port *ap);
|
|
static void ahci_disable_fbs(struct ata_port *ap);
|
|
static void ahci_pmp_attach(struct ata_port *ap);
|
|
static void ahci_pmp_detach(struct ata_port *ap);
|
|
static int ahci_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline);
|
|
static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline);
|
|
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline);
|
|
static void ahci_postreset(struct ata_link *link, unsigned int *class);
|
|
static void ahci_error_handler(struct ata_port *ap);
|
|
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
static void ahci_dev_config(struct ata_device *dev);
|
|
#ifdef CONFIG_PM
|
|
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
|
|
#endif
|
|
static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
|
|
static ssize_t ahci_activity_store(struct ata_device *dev,
|
|
enum sw_activity val);
|
|
static void ahci_init_sw_activity(struct ata_link *link);
|
|
|
|
static ssize_t ahci_show_host_caps(struct device *dev,
|
|
struct device_attribute *attr, char *buf);
|
|
static ssize_t ahci_show_host_cap2(struct device *dev,
|
|
struct device_attribute *attr, char *buf);
|
|
static ssize_t ahci_show_host_version(struct device *dev,
|
|
struct device_attribute *attr, char *buf);
|
|
static ssize_t ahci_show_port_cmd(struct device *dev,
|
|
struct device_attribute *attr, char *buf);
|
|
static ssize_t ahci_read_em_buffer(struct device *dev,
|
|
struct device_attribute *attr, char *buf);
|
|
static ssize_t ahci_store_em_buffer(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size);
|
|
static ssize_t ahci_show_em_supported(struct device *dev,
|
|
struct device_attribute *attr, char *buf);
|
|
|
|
static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
|
|
static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
|
|
static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
|
|
static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
|
|
static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO,
|
|
ahci_read_em_buffer, ahci_store_em_buffer);
|
|
static DEVICE_ATTR(em_message_supported, S_IRUGO, ahci_show_em_supported, NULL);
|
|
|
|
struct device_attribute *ahci_shost_attrs[] = {
|
|
&dev_attr_link_power_management_policy,
|
|
&dev_attr_em_message_type,
|
|
&dev_attr_em_message,
|
|
&dev_attr_ahci_host_caps,
|
|
&dev_attr_ahci_host_cap2,
|
|
&dev_attr_ahci_host_version,
|
|
&dev_attr_ahci_port_cmd,
|
|
&dev_attr_em_buffer,
|
|
&dev_attr_em_message_supported,
|
|
NULL
|
|
};
|
|
EXPORT_SYMBOL_GPL(ahci_shost_attrs);
|
|
|
|
struct device_attribute *ahci_sdev_attrs[] = {
|
|
&dev_attr_sw_activity,
|
|
&dev_attr_unload_heads,
|
|
NULL
|
|
};
|
|
EXPORT_SYMBOL_GPL(ahci_sdev_attrs);
|
|
|
|
struct ata_port_operations ahci_ops = {
|
|
.inherits = &sata_pmp_port_ops,
|
|
|
|
.qc_defer = ahci_pmp_qc_defer,
|
|
.qc_prep = ahci_qc_prep,
|
|
.qc_issue = ahci_qc_issue,
|
|
.qc_fill_rtf = ahci_qc_fill_rtf,
|
|
|
|
.freeze = ahci_freeze,
|
|
.thaw = ahci_thaw,
|
|
.softreset = ahci_softreset,
|
|
.hardreset = ahci_hardreset,
|
|
.postreset = ahci_postreset,
|
|
.pmp_softreset = ahci_softreset,
|
|
.error_handler = ahci_error_handler,
|
|
.post_internal_cmd = ahci_post_internal_cmd,
|
|
.dev_config = ahci_dev_config,
|
|
|
|
.scr_read = ahci_scr_read,
|
|
.scr_write = ahci_scr_write,
|
|
.pmp_attach = ahci_pmp_attach,
|
|
.pmp_detach = ahci_pmp_detach,
|
|
|
|
.set_lpm = ahci_set_lpm,
|
|
.em_show = ahci_led_show,
|
|
.em_store = ahci_led_store,
|
|
.sw_activity_show = ahci_activity_show,
|
|
.sw_activity_store = ahci_activity_store,
|
|
#ifdef CONFIG_PM
|
|
.port_suspend = ahci_port_suspend,
|
|
.port_resume = ahci_port_resume,
|
|
#endif
|
|
.port_start = ahci_port_start,
|
|
.port_stop = ahci_port_stop,
|
|
};
|
|
EXPORT_SYMBOL_GPL(ahci_ops);
|
|
|
|
struct ata_port_operations ahci_pmp_retry_srst_ops = {
|
|
.inherits = &ahci_ops,
|
|
.softreset = ahci_pmp_retry_softreset,
|
|
};
|
|
EXPORT_SYMBOL_GPL(ahci_pmp_retry_srst_ops);
|
|
|
|
int ahci_em_messages = 1;
|
|
EXPORT_SYMBOL_GPL(ahci_em_messages);
|
|
module_param(ahci_em_messages, int, 0444);
|
|
/* add other LED protocol types when they become supported */
|
|
MODULE_PARM_DESC(ahci_em_messages,
|
|
"AHCI Enclosure Management Message control (0 = off, 1 = on)");
|
|
|
|
static void ahci_enable_ahci(void __iomem *mmio)
|
|
{
|
|
int i;
|
|
u32 tmp;
|
|
|
|
/* turn on AHCI_EN */
|
|
tmp = readl(mmio + HOST_CTL);
|
|
if (tmp & HOST_AHCI_EN)
|
|
return;
|
|
|
|
/* Some controllers need AHCI_EN to be written multiple times.
|
|
* Try a few times before giving up.
|
|
*/
|
|
for (i = 0; i < 5; i++) {
|
|
tmp |= HOST_AHCI_EN;
|
|
writel(tmp, mmio + HOST_CTL);
|
|
tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
|
|
if (tmp & HOST_AHCI_EN)
|
|
return;
|
|
msleep(10);
|
|
}
|
|
|
|
WARN_ON(1);
|
|
}
|
|
|
|
static ssize_t ahci_show_host_caps(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
|
|
return sprintf(buf, "%x\n", hpriv->cap);
|
|
}
|
|
|
|
static ssize_t ahci_show_host_cap2(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
|
|
return sprintf(buf, "%x\n", hpriv->cap2);
|
|
}
|
|
|
|
static ssize_t ahci_show_host_version(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
|
|
return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION));
|
|
}
|
|
|
|
static ssize_t ahci_show_port_cmd(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
|
|
return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD));
|
|
}
|
|
|
|
static ssize_t ahci_read_em_buffer(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
void __iomem *em_mmio = mmio + hpriv->em_loc;
|
|
u32 em_ctl, msg;
|
|
unsigned long flags;
|
|
size_t count;
|
|
int i;
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
em_ctl = readl(mmio + HOST_EM_CTL);
|
|
if (!(ap->flags & ATA_FLAG_EM) || em_ctl & EM_CTL_XMT ||
|
|
!(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO)) {
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(em_ctl & EM_CTL_MR)) {
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (!(em_ctl & EM_CTL_SMB))
|
|
em_mmio += hpriv->em_buf_sz;
|
|
|
|
count = hpriv->em_buf_sz;
|
|
|
|
/* the count should not be larger than PAGE_SIZE */
|
|
if (count > PAGE_SIZE) {
|
|
if (printk_ratelimit())
|
|
ata_port_warn(ap,
|
|
"EM read buffer size too large: "
|
|
"buffer size %u, page size %lu\n",
|
|
hpriv->em_buf_sz, PAGE_SIZE);
|
|
count = PAGE_SIZE;
|
|
}
|
|
|
|
for (i = 0; i < count; i += 4) {
|
|
msg = readl(em_mmio + i);
|
|
buf[i] = msg & 0xff;
|
|
buf[i + 1] = (msg >> 8) & 0xff;
|
|
buf[i + 2] = (msg >> 16) & 0xff;
|
|
buf[i + 3] = (msg >> 24) & 0xff;
|
|
}
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
return i;
|
|
}
|
|
|
|
static ssize_t ahci_store_em_buffer(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
void __iomem *em_mmio = mmio + hpriv->em_loc;
|
|
const unsigned char *msg_buf = buf;
|
|
u32 em_ctl, msg;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
/* check size validity */
|
|
if (!(ap->flags & ATA_FLAG_EM) ||
|
|
!(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO) ||
|
|
size % 4 || size > hpriv->em_buf_sz)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
em_ctl = readl(mmio + HOST_EM_CTL);
|
|
if (em_ctl & EM_CTL_TM) {
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
return -EBUSY;
|
|
}
|
|
|
|
for (i = 0; i < size; i += 4) {
|
|
msg = msg_buf[i] | msg_buf[i + 1] << 8 |
|
|
msg_buf[i + 2] << 16 | msg_buf[i + 3] << 24;
|
|
writel(msg, em_mmio + i);
|
|
}
|
|
|
|
writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
return size;
|
|
}
|
|
|
|
static ssize_t ahci_show_em_supported(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(dev);
|
|
struct ata_port *ap = ata_shost_to_port(shost);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
u32 em_ctl;
|
|
|
|
em_ctl = readl(mmio + HOST_EM_CTL);
|
|
|
|
return sprintf(buf, "%s%s%s%s\n",
|
|
em_ctl & EM_CTL_LED ? "led " : "",
|
|
em_ctl & EM_CTL_SAFTE ? "saf-te " : "",
|
|
em_ctl & EM_CTL_SES ? "ses-2 " : "",
|
|
em_ctl & EM_CTL_SGPIO ? "sgpio " : "");
|
|
}
|
|
|
|
/**
|
|
* ahci_save_initial_config - Save and fixup initial config values
|
|
* @dev: target AHCI device
|
|
* @hpriv: host private area to store config values
|
|
* @force_port_map: force port map to a specified value
|
|
* @mask_port_map: mask out particular bits from port map
|
|
*
|
|
* Some registers containing configuration info might be setup by
|
|
* BIOS and might be cleared on reset. This function saves the
|
|
* initial values of those registers into @hpriv such that they
|
|
* can be restored after controller reset.
|
|
*
|
|
* If inconsistent, config values are fixed up by this function.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
void ahci_save_initial_config(struct device *dev,
|
|
struct ahci_host_priv *hpriv,
|
|
unsigned int force_port_map,
|
|
unsigned int mask_port_map)
|
|
{
|
|
void __iomem *mmio = hpriv->mmio;
|
|
u32 cap, cap2, vers, port_map;
|
|
int i;
|
|
|
|
/* make sure AHCI mode is enabled before accessing CAP */
|
|
ahci_enable_ahci(mmio);
|
|
|
|
/* Values prefixed with saved_ are written back to host after
|
|
* reset. Values without are used for driver operation.
|
|
*/
|
|
hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
|
|
hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
|
|
|
|
/* CAP2 register is only defined for AHCI 1.2 and later */
|
|
vers = readl(mmio + HOST_VERSION);
|
|
if ((vers >> 16) > 1 ||
|
|
((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
|
|
hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
|
|
else
|
|
hpriv->saved_cap2 = cap2 = 0;
|
|
|
|
/* some chips have errata preventing 64bit use */
|
|
if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
|
|
dev_info(dev, "controller can't do 64bit DMA, forcing 32bit\n");
|
|
cap &= ~HOST_CAP_64;
|
|
}
|
|
|
|
if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
|
|
dev_info(dev, "controller can't do NCQ, turning off CAP_NCQ\n");
|
|
cap &= ~HOST_CAP_NCQ;
|
|
}
|
|
|
|
if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
|
|
dev_info(dev, "controller can do NCQ, turning on CAP_NCQ\n");
|
|
cap |= HOST_CAP_NCQ;
|
|
}
|
|
|
|
if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
|
|
dev_info(dev, "controller can't do PMP, turning off CAP_PMP\n");
|
|
cap &= ~HOST_CAP_PMP;
|
|
}
|
|
|
|
if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
|
|
dev_info(dev,
|
|
"controller can't do SNTF, turning off CAP_SNTF\n");
|
|
cap &= ~HOST_CAP_SNTF;
|
|
}
|
|
|
|
if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) {
|
|
dev_info(dev, "controller can do FBS, turning on CAP_FBS\n");
|
|
cap |= HOST_CAP_FBS;
|
|
}
|
|
|
|
if (force_port_map && port_map != force_port_map) {
|
|
dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
|
|
port_map, force_port_map);
|
|
port_map = force_port_map;
|
|
}
|
|
|
|
if (mask_port_map) {
|
|
dev_warn(dev, "masking port_map 0x%x -> 0x%x\n",
|
|
port_map,
|
|
port_map & mask_port_map);
|
|
port_map &= mask_port_map;
|
|
}
|
|
|
|
/* cross check port_map and cap.n_ports */
|
|
if (port_map) {
|
|
int map_ports = 0;
|
|
|
|
for (i = 0; i < AHCI_MAX_PORTS; i++)
|
|
if (port_map & (1 << i))
|
|
map_ports++;
|
|
|
|
/* If PI has more ports than n_ports, whine, clear
|
|
* port_map and let it be generated from n_ports.
|
|
*/
|
|
if (map_ports > ahci_nr_ports(cap)) {
|
|
dev_warn(dev,
|
|
"implemented port map (0x%x) contains more ports than nr_ports (%u), using nr_ports\n",
|
|
port_map, ahci_nr_ports(cap));
|
|
port_map = 0;
|
|
}
|
|
}
|
|
|
|
/* fabricate port_map from cap.nr_ports */
|
|
if (!port_map) {
|
|
port_map = (1 << ahci_nr_ports(cap)) - 1;
|
|
dev_warn(dev, "forcing PORTS_IMPL to 0x%x\n", port_map);
|
|
|
|
/* write the fixed up value to the PI register */
|
|
hpriv->saved_port_map = port_map;
|
|
}
|
|
|
|
/* record values to use during operation */
|
|
hpriv->cap = cap;
|
|
hpriv->cap2 = cap2;
|
|
hpriv->port_map = port_map;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_save_initial_config);
|
|
|
|
/**
|
|
* ahci_restore_initial_config - Restore initial config
|
|
* @host: target ATA host
|
|
*
|
|
* Restore initial config stored by ahci_save_initial_config().
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static void ahci_restore_initial_config(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
|
|
writel(hpriv->saved_cap, mmio + HOST_CAP);
|
|
if (hpriv->saved_cap2)
|
|
writel(hpriv->saved_cap2, mmio + HOST_CAP2);
|
|
writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
|
|
(void) readl(mmio + HOST_PORTS_IMPL); /* flush */
|
|
}
|
|
|
|
static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
static const int offset[] = {
|
|
[SCR_STATUS] = PORT_SCR_STAT,
|
|
[SCR_CONTROL] = PORT_SCR_CTL,
|
|
[SCR_ERROR] = PORT_SCR_ERR,
|
|
[SCR_ACTIVE] = PORT_SCR_ACT,
|
|
[SCR_NOTIFICATION] = PORT_SCR_NTF,
|
|
};
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
|
|
if (sc_reg < ARRAY_SIZE(offset) &&
|
|
(sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
|
|
return offset[sc_reg];
|
|
return 0;
|
|
}
|
|
|
|
static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(link->ap);
|
|
int offset = ahci_scr_offset(link->ap, sc_reg);
|
|
|
|
if (offset) {
|
|
*val = readl(port_mmio + offset);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(link->ap);
|
|
int offset = ahci_scr_offset(link->ap, sc_reg);
|
|
|
|
if (offset) {
|
|
writel(val, port_mmio + offset);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
void ahci_start_engine(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
|
|
/* start DMA */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp |= PORT_CMD_START;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
readl(port_mmio + PORT_CMD); /* flush */
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_start_engine);
|
|
|
|
int ahci_stop_engine(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
|
|
/* check if the HBA is idle */
|
|
if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
|
|
return 0;
|
|
|
|
/* setting HBA to idle */
|
|
tmp &= ~PORT_CMD_START;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
/* wait for engine to stop. This could be as long as 500 msec */
|
|
tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
|
|
PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
|
|
if (tmp & PORT_CMD_LIST_ON)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_stop_engine);
|
|
|
|
static void ahci_start_fis_rx(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 tmp;
|
|
|
|
/* set FIS registers */
|
|
if (hpriv->cap & HOST_CAP_64)
|
|
writel((pp->cmd_slot_dma >> 16) >> 16,
|
|
port_mmio + PORT_LST_ADDR_HI);
|
|
writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
|
|
|
|
if (hpriv->cap & HOST_CAP_64)
|
|
writel((pp->rx_fis_dma >> 16) >> 16,
|
|
port_mmio + PORT_FIS_ADDR_HI);
|
|
writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
|
|
|
|
/* enable FIS reception */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp |= PORT_CMD_FIS_RX;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
/* flush */
|
|
readl(port_mmio + PORT_CMD);
|
|
}
|
|
|
|
static int ahci_stop_fis_rx(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
|
|
/* disable FIS reception */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp &= ~PORT_CMD_FIS_RX;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
/* wait for completion, spec says 500ms, give it 1000 */
|
|
tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
|
|
PORT_CMD_FIS_ON, 10, 1000);
|
|
if (tmp & PORT_CMD_FIS_ON)
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_power_up(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd;
|
|
|
|
cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
|
|
|
|
/* spin up device */
|
|
if (hpriv->cap & HOST_CAP_SSS) {
|
|
cmd |= PORT_CMD_SPIN_UP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
}
|
|
|
|
/* wake up link */
|
|
writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
|
|
}
|
|
|
|
static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
|
|
unsigned int hints)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
|
|
if (policy != ATA_LPM_MAX_POWER) {
|
|
/*
|
|
* Disable interrupts on Phy Ready. This keeps us from
|
|
* getting woken up due to spurious phy ready
|
|
* interrupts.
|
|
*/
|
|
pp->intr_mask &= ~PORT_IRQ_PHYRDY;
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
|
|
sata_link_scr_lpm(link, policy, false);
|
|
}
|
|
|
|
if (hpriv->cap & HOST_CAP_ALPM) {
|
|
u32 cmd = readl(port_mmio + PORT_CMD);
|
|
|
|
if (policy == ATA_LPM_MAX_POWER || !(hints & ATA_LPM_HIPM)) {
|
|
cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE);
|
|
cmd |= PORT_CMD_ICC_ACTIVE;
|
|
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
readl(port_mmio + PORT_CMD);
|
|
|
|
/* wait 10ms to be sure we've come out of LPM state */
|
|
ata_msleep(ap, 10);
|
|
} else {
|
|
cmd |= PORT_CMD_ALPE;
|
|
if (policy == ATA_LPM_MIN_POWER)
|
|
cmd |= PORT_CMD_ASP;
|
|
|
|
/* write out new cmd value */
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
}
|
|
}
|
|
|
|
if (policy == ATA_LPM_MAX_POWER) {
|
|
sata_link_scr_lpm(link, policy, false);
|
|
|
|
/* turn PHYRDY IRQ back on */
|
|
pp->intr_mask |= PORT_IRQ_PHYRDY;
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void ahci_power_down(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd, scontrol;
|
|
|
|
if (!(hpriv->cap & HOST_CAP_SSS))
|
|
return;
|
|
|
|
/* put device into listen mode, first set PxSCTL.DET to 0 */
|
|
scontrol = readl(port_mmio + PORT_SCR_CTL);
|
|
scontrol &= ~0xf;
|
|
writel(scontrol, port_mmio + PORT_SCR_CTL);
|
|
|
|
/* then set PxCMD.SUD to 0 */
|
|
cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
|
|
cmd &= ~PORT_CMD_SPIN_UP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
}
|
|
#endif
|
|
|
|
static void ahci_start_port(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ata_link *link;
|
|
struct ahci_em_priv *emp;
|
|
ssize_t rc;
|
|
int i;
|
|
|
|
/* enable FIS reception */
|
|
ahci_start_fis_rx(ap);
|
|
|
|
/* enable DMA */
|
|
if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE))
|
|
ahci_start_engine(ap);
|
|
|
|
/* turn on LEDs */
|
|
if (ap->flags & ATA_FLAG_EM) {
|
|
ata_for_each_link(link, ap, EDGE) {
|
|
emp = &pp->em_priv[link->pmp];
|
|
|
|
/* EM Transmit bit maybe busy during init */
|
|
for (i = 0; i < EM_MAX_RETRY; i++) {
|
|
rc = ahci_transmit_led_message(ap,
|
|
emp->led_state,
|
|
4);
|
|
if (rc == -EBUSY)
|
|
ata_msleep(ap, 1);
|
|
else
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ap->flags & ATA_FLAG_SW_ACTIVITY)
|
|
ata_for_each_link(link, ap, EDGE)
|
|
ahci_init_sw_activity(link);
|
|
|
|
}
|
|
|
|
static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
|
|
{
|
|
int rc;
|
|
|
|
/* disable DMA */
|
|
rc = ahci_stop_engine(ap);
|
|
if (rc) {
|
|
*emsg = "failed to stop engine";
|
|
return rc;
|
|
}
|
|
|
|
/* disable FIS reception */
|
|
rc = ahci_stop_fis_rx(ap);
|
|
if (rc) {
|
|
*emsg = "failed stop FIS RX";
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ahci_reset_controller(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
u32 tmp;
|
|
|
|
/* we must be in AHCI mode, before using anything
|
|
* AHCI-specific, such as HOST_RESET.
|
|
*/
|
|
ahci_enable_ahci(mmio);
|
|
|
|
/* global controller reset */
|
|
if (!ahci_skip_host_reset) {
|
|
tmp = readl(mmio + HOST_CTL);
|
|
if ((tmp & HOST_RESET) == 0) {
|
|
writel(tmp | HOST_RESET, mmio + HOST_CTL);
|
|
readl(mmio + HOST_CTL); /* flush */
|
|
}
|
|
|
|
/*
|
|
* to perform host reset, OS should set HOST_RESET
|
|
* and poll until this bit is read to be "0".
|
|
* reset must complete within 1 second, or
|
|
* the hardware should be considered fried.
|
|
*/
|
|
tmp = ata_wait_register(NULL, mmio + HOST_CTL, HOST_RESET,
|
|
HOST_RESET, 10, 1000);
|
|
|
|
if (tmp & HOST_RESET) {
|
|
dev_err(host->dev, "controller reset failed (0x%x)\n",
|
|
tmp);
|
|
return -EIO;
|
|
}
|
|
|
|
/* turn on AHCI mode */
|
|
ahci_enable_ahci(mmio);
|
|
|
|
/* Some registers might be cleared on reset. Restore
|
|
* initial values.
|
|
*/
|
|
ahci_restore_initial_config(host);
|
|
} else
|
|
dev_info(host->dev, "skipping global host reset\n");
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_reset_controller);
|
|
|
|
static void ahci_sw_activity(struct ata_link *link)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
|
|
|
|
if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
|
|
return;
|
|
|
|
emp->activity++;
|
|
if (!timer_pending(&emp->timer))
|
|
mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
|
|
}
|
|
|
|
static void ahci_sw_activity_blink(unsigned long arg)
|
|
{
|
|
struct ata_link *link = (struct ata_link *)arg;
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
|
|
unsigned long led_message = emp->led_state;
|
|
u32 activity_led_state;
|
|
unsigned long flags;
|
|
|
|
led_message &= EM_MSG_LED_VALUE;
|
|
led_message |= ap->port_no | (link->pmp << 8);
|
|
|
|
/* check to see if we've had activity. If so,
|
|
* toggle state of LED and reset timer. If not,
|
|
* turn LED to desired idle state.
|
|
*/
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
if (emp->saved_activity != emp->activity) {
|
|
emp->saved_activity = emp->activity;
|
|
/* get the current LED state */
|
|
activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
|
|
|
|
if (activity_led_state)
|
|
activity_led_state = 0;
|
|
else
|
|
activity_led_state = 1;
|
|
|
|
/* clear old state */
|
|
led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
|
|
|
|
/* toggle state */
|
|
led_message |= (activity_led_state << 16);
|
|
mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
|
|
} else {
|
|
/* switch to idle */
|
|
led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
|
|
if (emp->blink_policy == BLINK_OFF)
|
|
led_message |= (1 << 16);
|
|
}
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
ahci_transmit_led_message(ap, led_message, 4);
|
|
}
|
|
|
|
static void ahci_init_sw_activity(struct ata_link *link)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
|
|
|
|
/* init activity stats, setup timer */
|
|
emp->saved_activity = emp->activity = 0;
|
|
setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
|
|
|
|
/* check our blink policy and set flag for link if it's enabled */
|
|
if (emp->blink_policy)
|
|
link->flags |= ATA_LFLAG_SW_ACTIVITY;
|
|
}
|
|
|
|
int ahci_reset_em(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
u32 em_ctl;
|
|
|
|
em_ctl = readl(mmio + HOST_EM_CTL);
|
|
if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
|
|
return -EINVAL;
|
|
|
|
writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_reset_em);
|
|
|
|
static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
|
|
ssize_t size)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
u32 em_ctl;
|
|
u32 message[] = {0, 0};
|
|
unsigned long flags;
|
|
int pmp;
|
|
struct ahci_em_priv *emp;
|
|
|
|
/* get the slot number from the message */
|
|
pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
|
|
if (pmp < EM_MAX_SLOTS)
|
|
emp = &pp->em_priv[pmp];
|
|
else
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
/*
|
|
* if we are still busy transmitting a previous message,
|
|
* do not allow
|
|
*/
|
|
em_ctl = readl(mmio + HOST_EM_CTL);
|
|
if (em_ctl & EM_CTL_TM) {
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (hpriv->em_msg_type & EM_MSG_TYPE_LED) {
|
|
/*
|
|
* create message header - this is all zero except for
|
|
* the message size, which is 4 bytes.
|
|
*/
|
|
message[0] |= (4 << 8);
|
|
|
|
/* ignore 0:4 of byte zero, fill in port info yourself */
|
|
message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
|
|
|
|
/* write message to EM_LOC */
|
|
writel(message[0], mmio + hpriv->em_loc);
|
|
writel(message[1], mmio + hpriv->em_loc+4);
|
|
|
|
/*
|
|
* tell hardware to transmit the message
|
|
*/
|
|
writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
|
|
}
|
|
|
|
/* save off new led state for port/slot */
|
|
emp->led_state = state;
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
return size;
|
|
}
|
|
|
|
static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
|
|
{
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ata_link *link;
|
|
struct ahci_em_priv *emp;
|
|
int rc = 0;
|
|
|
|
ata_for_each_link(link, ap, EDGE) {
|
|
emp = &pp->em_priv[link->pmp];
|
|
rc += sprintf(buf, "%lx\n", emp->led_state);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
|
|
size_t size)
|
|
{
|
|
int state;
|
|
int pmp;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ahci_em_priv *emp;
|
|
|
|
state = simple_strtoul(buf, NULL, 0);
|
|
|
|
/* get the slot number from the message */
|
|
pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
|
|
if (pmp < EM_MAX_SLOTS)
|
|
emp = &pp->em_priv[pmp];
|
|
else
|
|
return -EINVAL;
|
|
|
|
/* mask off the activity bits if we are in sw_activity
|
|
* mode, user should turn off sw_activity before setting
|
|
* activity led through em_message
|
|
*/
|
|
if (emp->blink_policy)
|
|
state &= ~EM_MSG_LED_VALUE_ACTIVITY;
|
|
|
|
return ahci_transmit_led_message(ap, state, size);
|
|
}
|
|
|
|
static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
|
|
{
|
|
struct ata_link *link = dev->link;
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
|
|
u32 port_led_state = emp->led_state;
|
|
|
|
/* save the desired Activity LED behavior */
|
|
if (val == OFF) {
|
|
/* clear LFLAG */
|
|
link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
|
|
|
|
/* set the LED to OFF */
|
|
port_led_state &= EM_MSG_LED_VALUE_OFF;
|
|
port_led_state |= (ap->port_no | (link->pmp << 8));
|
|
ahci_transmit_led_message(ap, port_led_state, 4);
|
|
} else {
|
|
link->flags |= ATA_LFLAG_SW_ACTIVITY;
|
|
if (val == BLINK_OFF) {
|
|
/* set LED to ON for idle */
|
|
port_led_state &= EM_MSG_LED_VALUE_OFF;
|
|
port_led_state |= (ap->port_no | (link->pmp << 8));
|
|
port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
|
|
ahci_transmit_led_message(ap, port_led_state, 4);
|
|
}
|
|
}
|
|
emp->blink_policy = val;
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
|
|
{
|
|
struct ata_link *link = dev->link;
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
|
|
|
|
/* display the saved value of activity behavior for this
|
|
* disk.
|
|
*/
|
|
return sprintf(buf, "%d\n", emp->blink_policy);
|
|
}
|
|
|
|
static void ahci_port_init(struct device *dev, struct ata_port *ap,
|
|
int port_no, void __iomem *mmio,
|
|
void __iomem *port_mmio)
|
|
{
|
|
const char *emsg = NULL;
|
|
int rc;
|
|
u32 tmp;
|
|
|
|
/* make sure port is not active */
|
|
rc = ahci_deinit_port(ap, &emsg);
|
|
if (rc)
|
|
dev_warn(dev, "%s (%d)\n", emsg, rc);
|
|
|
|
/* clear SError */
|
|
tmp = readl(port_mmio + PORT_SCR_ERR);
|
|
VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
|
|
writel(tmp, port_mmio + PORT_SCR_ERR);
|
|
|
|
/* clear port IRQ */
|
|
tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
|
|
if (tmp)
|
|
writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
|
|
writel(1 << port_no, mmio + HOST_IRQ_STAT);
|
|
}
|
|
|
|
void ahci_init_controller(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
int i;
|
|
void __iomem *port_mmio;
|
|
u32 tmp;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
port_mmio = ahci_port_base(ap);
|
|
if (ata_port_is_dummy(ap))
|
|
continue;
|
|
|
|
ahci_port_init(host->dev, ap, i, mmio, port_mmio);
|
|
}
|
|
|
|
tmp = readl(mmio + HOST_CTL);
|
|
VPRINTK("HOST_CTL 0x%x\n", tmp);
|
|
writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
|
|
tmp = readl(mmio + HOST_CTL);
|
|
VPRINTK("HOST_CTL 0x%x\n", tmp);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_init_controller);
|
|
|
|
static void ahci_dev_config(struct ata_device *dev)
|
|
{
|
|
struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
|
|
|
|
if (hpriv->flags & AHCI_HFLAG_SECT255) {
|
|
dev->max_sectors = 255;
|
|
ata_dev_info(dev,
|
|
"SB600 AHCI: limiting to 255 sectors per cmd\n");
|
|
}
|
|
}
|
|
|
|
static unsigned int ahci_dev_classify(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ata_taskfile tf;
|
|
u32 tmp;
|
|
|
|
tmp = readl(port_mmio + PORT_SIG);
|
|
tf.lbah = (tmp >> 24) & 0xff;
|
|
tf.lbam = (tmp >> 16) & 0xff;
|
|
tf.lbal = (tmp >> 8) & 0xff;
|
|
tf.nsect = (tmp) & 0xff;
|
|
|
|
return ata_dev_classify(&tf);
|
|
}
|
|
|
|
void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
|
|
u32 opts)
|
|
{
|
|
dma_addr_t cmd_tbl_dma;
|
|
|
|
cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
|
|
|
|
pp->cmd_slot[tag].opts = cpu_to_le32(opts);
|
|
pp->cmd_slot[tag].status = 0;
|
|
pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
|
|
pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_fill_cmd_slot);
|
|
|
|
int ahci_kick_engine(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
|
|
u32 tmp;
|
|
int busy, rc;
|
|
|
|
/* stop engine */
|
|
rc = ahci_stop_engine(ap);
|
|
if (rc)
|
|
goto out_restart;
|
|
|
|
/* need to do CLO?
|
|
* always do CLO if PMP is attached (AHCI-1.3 9.2)
|
|
*/
|
|
busy = status & (ATA_BUSY | ATA_DRQ);
|
|
if (!busy && !sata_pmp_attached(ap)) {
|
|
rc = 0;
|
|
goto out_restart;
|
|
}
|
|
|
|
if (!(hpriv->cap & HOST_CAP_CLO)) {
|
|
rc = -EOPNOTSUPP;
|
|
goto out_restart;
|
|
}
|
|
|
|
/* perform CLO */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp |= PORT_CMD_CLO;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
rc = 0;
|
|
tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
|
|
PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
|
|
if (tmp & PORT_CMD_CLO)
|
|
rc = -EIO;
|
|
|
|
/* restart engine */
|
|
out_restart:
|
|
ahci_start_engine(ap);
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_kick_engine);
|
|
|
|
static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
|
|
struct ata_taskfile *tf, int is_cmd, u16 flags,
|
|
unsigned long timeout_msec)
|
|
{
|
|
const u32 cmd_fis_len = 5; /* five dwords */
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u8 *fis = pp->cmd_tbl;
|
|
u32 tmp;
|
|
|
|
/* prep the command */
|
|
ata_tf_to_fis(tf, pmp, is_cmd, fis);
|
|
ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
|
|
|
|
/* issue & wait */
|
|
writel(1, port_mmio + PORT_CMD_ISSUE);
|
|
|
|
if (timeout_msec) {
|
|
tmp = ata_wait_register(ap, port_mmio + PORT_CMD_ISSUE,
|
|
0x1, 0x1, 1, timeout_msec);
|
|
if (tmp & 0x1) {
|
|
ahci_kick_engine(ap);
|
|
return -EBUSY;
|
|
}
|
|
} else
|
|
readl(port_mmio + PORT_CMD_ISSUE); /* flush */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ahci_do_softreset(struct ata_link *link, unsigned int *class,
|
|
int pmp, unsigned long deadline,
|
|
int (*check_ready)(struct ata_link *link))
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
const char *reason = NULL;
|
|
unsigned long now, msecs;
|
|
struct ata_taskfile tf;
|
|
int rc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
/* prepare for SRST (AHCI-1.1 10.4.1) */
|
|
rc = ahci_kick_engine(ap);
|
|
if (rc && rc != -EOPNOTSUPP)
|
|
ata_link_warn(link, "failed to reset engine (errno=%d)\n", rc);
|
|
|
|
ata_tf_init(link->device, &tf);
|
|
|
|
/* issue the first D2H Register FIS */
|
|
msecs = 0;
|
|
now = jiffies;
|
|
if (time_after(deadline, now))
|
|
msecs = jiffies_to_msecs(deadline - now);
|
|
|
|
tf.ctl |= ATA_SRST;
|
|
if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
|
|
AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
|
|
rc = -EIO;
|
|
reason = "1st FIS failed";
|
|
goto fail;
|
|
}
|
|
|
|
/* spec says at least 5us, but be generous and sleep for 1ms */
|
|
ata_msleep(ap, 1);
|
|
|
|
/* issue the second D2H Register FIS */
|
|
tf.ctl &= ~ATA_SRST;
|
|
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
|
|
|
|
/* wait for link to become ready */
|
|
rc = ata_wait_after_reset(link, deadline, check_ready);
|
|
if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
|
|
/*
|
|
* Workaround for cases where link online status can't
|
|
* be trusted. Treat device readiness timeout as link
|
|
* offline.
|
|
*/
|
|
ata_link_info(link, "device not ready, treating as offline\n");
|
|
*class = ATA_DEV_NONE;
|
|
} else if (rc) {
|
|
/* link occupied, -ENODEV too is an error */
|
|
reason = "device not ready";
|
|
goto fail;
|
|
} else
|
|
*class = ahci_dev_classify(ap);
|
|
|
|
DPRINTK("EXIT, class=%u\n", *class);
|
|
return 0;
|
|
|
|
fail:
|
|
ata_link_err(link, "softreset failed (%s)\n", reason);
|
|
return rc;
|
|
}
|
|
|
|
int ahci_check_ready(struct ata_link *link)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(link->ap);
|
|
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
|
|
|
|
return ata_check_ready(status);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_check_ready);
|
|
|
|
static int ahci_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
int pmp = sata_srst_pmp(link);
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_do_softreset);
|
|
|
|
static int ahci_bad_pmp_check_ready(struct ata_link *link)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(link->ap);
|
|
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
|
|
u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
|
|
|
|
/*
|
|
* There is no need to check TFDATA if BAD PMP is found due to HW bug,
|
|
* which can save timeout delay.
|
|
*/
|
|
if (irq_status & PORT_IRQ_BAD_PMP)
|
|
return -EIO;
|
|
|
|
return ata_check_ready(status);
|
|
}
|
|
|
|
int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
int pmp = sata_srst_pmp(link);
|
|
int rc;
|
|
u32 irq_sts;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
rc = ahci_do_softreset(link, class, pmp, deadline,
|
|
ahci_bad_pmp_check_ready);
|
|
|
|
/*
|
|
* Soft reset fails with IPMS set when PMP is enabled but
|
|
* SATA HDD/ODD is connected to SATA port, do soft reset
|
|
* again to port 0.
|
|
*/
|
|
if (rc == -EIO) {
|
|
irq_sts = readl(port_mmio + PORT_IRQ_STAT);
|
|
if (irq_sts & PORT_IRQ_BAD_PMP) {
|
|
ata_link_printk(link, KERN_WARNING,
|
|
"applying PMP SRST workaround "
|
|
"and retrying\n");
|
|
rc = ahci_do_softreset(link, class, 0, deadline,
|
|
ahci_check_ready);
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
struct ata_taskfile tf;
|
|
bool online;
|
|
int rc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
ahci_stop_engine(ap);
|
|
|
|
/* clear D2H reception area to properly wait for D2H FIS */
|
|
ata_tf_init(link->device, &tf);
|
|
tf.command = 0x80;
|
|
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
|
|
|
|
rc = sata_link_hardreset(link, timing, deadline, &online,
|
|
ahci_check_ready);
|
|
|
|
ahci_start_engine(ap);
|
|
|
|
if (online)
|
|
*class = ahci_dev_classify(ap);
|
|
|
|
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
|
|
return rc;
|
|
}
|
|
|
|
static void ahci_postreset(struct ata_link *link, unsigned int *class)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 new_tmp, tmp;
|
|
|
|
ata_std_postreset(link, class);
|
|
|
|
/* Make sure port's ATAPI bit is set appropriately */
|
|
new_tmp = tmp = readl(port_mmio + PORT_CMD);
|
|
if (*class == ATA_DEV_ATAPI)
|
|
new_tmp |= PORT_CMD_ATAPI;
|
|
else
|
|
new_tmp &= ~PORT_CMD_ATAPI;
|
|
if (new_tmp != tmp) {
|
|
writel(new_tmp, port_mmio + PORT_CMD);
|
|
readl(port_mmio + PORT_CMD); /* flush */
|
|
}
|
|
}
|
|
|
|
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
|
|
{
|
|
struct scatterlist *sg;
|
|
struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
|
|
unsigned int si;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
/*
|
|
* Next, the S/G list.
|
|
*/
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
dma_addr_t addr = sg_dma_address(sg);
|
|
u32 sg_len = sg_dma_len(sg);
|
|
|
|
ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
|
|
ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
|
|
ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
|
|
}
|
|
|
|
return si;
|
|
}
|
|
|
|
static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
|
|
if (!sata_pmp_attached(ap) || pp->fbs_enabled)
|
|
return ata_std_qc_defer(qc);
|
|
else
|
|
return sata_pmp_qc_defer_cmd_switch(qc);
|
|
}
|
|
|
|
static void ahci_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
int is_atapi = ata_is_atapi(qc->tf.protocol);
|
|
void *cmd_tbl;
|
|
u32 opts;
|
|
const u32 cmd_fis_len = 5; /* five dwords */
|
|
unsigned int n_elem;
|
|
|
|
/*
|
|
* Fill in command table information. First, the header,
|
|
* a SATA Register - Host to Device command FIS.
|
|
*/
|
|
cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
|
|
|
|
ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
|
|
if (is_atapi) {
|
|
memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
|
|
memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
|
|
}
|
|
|
|
n_elem = 0;
|
|
if (qc->flags & ATA_QCFLAG_DMAMAP)
|
|
n_elem = ahci_fill_sg(qc, cmd_tbl);
|
|
|
|
/*
|
|
* Fill in command slot information.
|
|
*/
|
|
opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
|
|
if (qc->tf.flags & ATA_TFLAG_WRITE)
|
|
opts |= AHCI_CMD_WRITE;
|
|
if (is_atapi)
|
|
opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
|
|
|
|
ahci_fill_cmd_slot(pp, qc->tag, opts);
|
|
}
|
|
|
|
static void ahci_fbs_dec_intr(struct ata_port *ap)
|
|
{
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 fbs = readl(port_mmio + PORT_FBS);
|
|
int retries = 3;
|
|
|
|
DPRINTK("ENTER\n");
|
|
BUG_ON(!pp->fbs_enabled);
|
|
|
|
/* time to wait for DEC is not specified by AHCI spec,
|
|
* add a retry loop for safety.
|
|
*/
|
|
writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS);
|
|
fbs = readl(port_mmio + PORT_FBS);
|
|
while ((fbs & PORT_FBS_DEC) && retries--) {
|
|
udelay(1);
|
|
fbs = readl(port_mmio + PORT_FBS);
|
|
}
|
|
|
|
if (fbs & PORT_FBS_DEC)
|
|
dev_err(ap->host->dev, "failed to clear device error\n");
|
|
}
|
|
|
|
static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ata_eh_info *host_ehi = &ap->link.eh_info;
|
|
struct ata_link *link = NULL;
|
|
struct ata_queued_cmd *active_qc;
|
|
struct ata_eh_info *active_ehi;
|
|
bool fbs_need_dec = false;
|
|
u32 serror;
|
|
|
|
/* determine active link with error */
|
|
if (pp->fbs_enabled) {
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 fbs = readl(port_mmio + PORT_FBS);
|
|
int pmp = fbs >> PORT_FBS_DWE_OFFSET;
|
|
|
|
if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) &&
|
|
ata_link_online(&ap->pmp_link[pmp])) {
|
|
link = &ap->pmp_link[pmp];
|
|
fbs_need_dec = true;
|
|
}
|
|
|
|
} else
|
|
ata_for_each_link(link, ap, EDGE)
|
|
if (ata_link_active(link))
|
|
break;
|
|
|
|
if (!link)
|
|
link = &ap->link;
|
|
|
|
active_qc = ata_qc_from_tag(ap, link->active_tag);
|
|
active_ehi = &link->eh_info;
|
|
|
|
/* record irq stat */
|
|
ata_ehi_clear_desc(host_ehi);
|
|
ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
|
|
|
|
/* AHCI needs SError cleared; otherwise, it might lock up */
|
|
ahci_scr_read(&ap->link, SCR_ERROR, &serror);
|
|
ahci_scr_write(&ap->link, SCR_ERROR, serror);
|
|
host_ehi->serror |= serror;
|
|
|
|
/* some controllers set IRQ_IF_ERR on device errors, ignore it */
|
|
if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
|
|
irq_stat &= ~PORT_IRQ_IF_ERR;
|
|
|
|
if (irq_stat & PORT_IRQ_TF_ERR) {
|
|
/* If qc is active, charge it; otherwise, the active
|
|
* link. There's no active qc on NCQ errors. It will
|
|
* be determined by EH by reading log page 10h.
|
|
*/
|
|
if (active_qc)
|
|
active_qc->err_mask |= AC_ERR_DEV;
|
|
else
|
|
active_ehi->err_mask |= AC_ERR_DEV;
|
|
|
|
if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
|
|
host_ehi->serror &= ~SERR_INTERNAL;
|
|
}
|
|
|
|
if (irq_stat & PORT_IRQ_UNK_FIS) {
|
|
u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
|
|
|
|
active_ehi->err_mask |= AC_ERR_HSM;
|
|
active_ehi->action |= ATA_EH_RESET;
|
|
ata_ehi_push_desc(active_ehi,
|
|
"unknown FIS %08x %08x %08x %08x" ,
|
|
unk[0], unk[1], unk[2], unk[3]);
|
|
}
|
|
|
|
if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
|
|
active_ehi->err_mask |= AC_ERR_HSM;
|
|
active_ehi->action |= ATA_EH_RESET;
|
|
ata_ehi_push_desc(active_ehi, "incorrect PMP");
|
|
}
|
|
|
|
if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
|
|
host_ehi->err_mask |= AC_ERR_HOST_BUS;
|
|
host_ehi->action |= ATA_EH_RESET;
|
|
ata_ehi_push_desc(host_ehi, "host bus error");
|
|
}
|
|
|
|
if (irq_stat & PORT_IRQ_IF_ERR) {
|
|
if (fbs_need_dec)
|
|
active_ehi->err_mask |= AC_ERR_DEV;
|
|
else {
|
|
host_ehi->err_mask |= AC_ERR_ATA_BUS;
|
|
host_ehi->action |= ATA_EH_RESET;
|
|
}
|
|
|
|
ata_ehi_push_desc(host_ehi, "interface fatal error");
|
|
}
|
|
|
|
if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
|
|
ata_ehi_hotplugged(host_ehi);
|
|
ata_ehi_push_desc(host_ehi, "%s",
|
|
irq_stat & PORT_IRQ_CONNECT ?
|
|
"connection status changed" : "PHY RDY changed");
|
|
}
|
|
|
|
/* okay, let's hand over to EH */
|
|
|
|
if (irq_stat & PORT_IRQ_FREEZE)
|
|
ata_port_freeze(ap);
|
|
else if (fbs_need_dec) {
|
|
ata_link_abort(link);
|
|
ahci_fbs_dec_intr(ap);
|
|
} else
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static void ahci_port_intr(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
|
|
u32 status, qc_active = 0;
|
|
int rc;
|
|
|
|
status = readl(port_mmio + PORT_IRQ_STAT);
|
|
writel(status, port_mmio + PORT_IRQ_STAT);
|
|
|
|
/* ignore BAD_PMP while resetting */
|
|
if (unlikely(resetting))
|
|
status &= ~PORT_IRQ_BAD_PMP;
|
|
|
|
/* if LPM is enabled, PHYRDY doesn't mean anything */
|
|
if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) {
|
|
status &= ~PORT_IRQ_PHYRDY;
|
|
ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG);
|
|
}
|
|
|
|
if (unlikely(status & PORT_IRQ_ERROR)) {
|
|
ahci_error_intr(ap, status);
|
|
return;
|
|
}
|
|
|
|
if (status & PORT_IRQ_SDB_FIS) {
|
|
/* If SNotification is available, leave notification
|
|
* handling to sata_async_notification(). If not,
|
|
* emulate it by snooping SDB FIS RX area.
|
|
*
|
|
* Snooping FIS RX area is probably cheaper than
|
|
* poking SNotification but some constrollers which
|
|
* implement SNotification, ICH9 for example, don't
|
|
* store AN SDB FIS into receive area.
|
|
*/
|
|
if (hpriv->cap & HOST_CAP_SNTF)
|
|
sata_async_notification(ap);
|
|
else {
|
|
/* If the 'N' bit in word 0 of the FIS is set,
|
|
* we just received asynchronous notification.
|
|
* Tell libata about it.
|
|
*
|
|
* Lack of SNotification should not appear in
|
|
* ahci 1.2, so the workaround is unnecessary
|
|
* when FBS is enabled.
|
|
*/
|
|
if (pp->fbs_enabled)
|
|
WARN_ON_ONCE(1);
|
|
else {
|
|
const __le32 *f = pp->rx_fis + RX_FIS_SDB;
|
|
u32 f0 = le32_to_cpu(f[0]);
|
|
if (f0 & (1 << 15))
|
|
sata_async_notification(ap);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* pp->active_link is not reliable once FBS is enabled, both
|
|
* PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because
|
|
* NCQ and non-NCQ commands may be in flight at the same time.
|
|
*/
|
|
if (pp->fbs_enabled) {
|
|
if (ap->qc_active) {
|
|
qc_active = readl(port_mmio + PORT_SCR_ACT);
|
|
qc_active |= readl(port_mmio + PORT_CMD_ISSUE);
|
|
}
|
|
} else {
|
|
/* pp->active_link is valid iff any command is in flight */
|
|
if (ap->qc_active && pp->active_link->sactive)
|
|
qc_active = readl(port_mmio + PORT_SCR_ACT);
|
|
else
|
|
qc_active = readl(port_mmio + PORT_CMD_ISSUE);
|
|
}
|
|
|
|
|
|
rc = ata_qc_complete_multiple(ap, qc_active);
|
|
|
|
/* while resetting, invalid completions are expected */
|
|
if (unlikely(rc < 0 && !resetting)) {
|
|
ehi->err_mask |= AC_ERR_HSM;
|
|
ehi->action |= ATA_EH_RESET;
|
|
ata_port_freeze(ap);
|
|
}
|
|
}
|
|
|
|
irqreturn_t ahci_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
struct ahci_host_priv *hpriv;
|
|
unsigned int i, handled = 0;
|
|
void __iomem *mmio;
|
|
u32 irq_stat, irq_masked;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
hpriv = host->private_data;
|
|
mmio = hpriv->mmio;
|
|
|
|
/* sigh. 0xffffffff is a valid return from h/w */
|
|
irq_stat = readl(mmio + HOST_IRQ_STAT);
|
|
if (!irq_stat)
|
|
return IRQ_NONE;
|
|
|
|
irq_masked = irq_stat & hpriv->port_map;
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap;
|
|
|
|
if (!(irq_masked & (1 << i)))
|
|
continue;
|
|
|
|
ap = host->ports[i];
|
|
if (ap) {
|
|
ahci_port_intr(ap);
|
|
VPRINTK("port %u\n", i);
|
|
} else {
|
|
VPRINTK("port %u (no irq)\n", i);
|
|
if (ata_ratelimit())
|
|
dev_warn(host->dev,
|
|
"interrupt on disabled port %u\n", i);
|
|
}
|
|
|
|
handled = 1;
|
|
}
|
|
|
|
/* HOST_IRQ_STAT behaves as level triggered latch meaning that
|
|
* it should be cleared after all the port events are cleared;
|
|
* otherwise, it will raise a spurious interrupt after each
|
|
* valid one. Please read section 10.6.2 of ahci 1.1 for more
|
|
* information.
|
|
*
|
|
* Also, use the unmasked value to clear interrupt as spurious
|
|
* pending event on a dummy port might cause screaming IRQ.
|
|
*/
|
|
writel(irq_stat, mmio + HOST_IRQ_STAT);
|
|
|
|
spin_unlock(&host->lock);
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_interrupt);
|
|
|
|
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
|
|
/* Keep track of the currently active link. It will be used
|
|
* in completion path to determine whether NCQ phase is in
|
|
* progress.
|
|
*/
|
|
pp->active_link = qc->dev->link;
|
|
|
|
if (qc->tf.protocol == ATA_PROT_NCQ)
|
|
writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
|
|
|
|
if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
|
|
u32 fbs = readl(port_mmio + PORT_FBS);
|
|
fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
|
|
fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
|
|
writel(fbs, port_mmio + PORT_FBS);
|
|
pp->fbs_last_dev = qc->dev->link->pmp;
|
|
}
|
|
|
|
writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
|
|
|
|
ahci_sw_activity(qc->dev->link);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ahci_port_priv *pp = qc->ap->private_data;
|
|
u8 *rx_fis = pp->rx_fis;
|
|
|
|
if (pp->fbs_enabled)
|
|
rx_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
|
|
|
|
/*
|
|
* After a successful execution of an ATA PIO data-in command,
|
|
* the device doesn't send D2H Reg FIS to update the TF and
|
|
* the host should take TF and E_Status from the preceding PIO
|
|
* Setup FIS.
|
|
*/
|
|
if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE &&
|
|
!(qc->flags & ATA_QCFLAG_FAILED)) {
|
|
ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf);
|
|
qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15];
|
|
} else
|
|
ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf);
|
|
|
|
return true;
|
|
}
|
|
|
|
static void ahci_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
|
|
/* turn IRQ off */
|
|
writel(0, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static void ahci_thaw(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
|
|
/* clear IRQ */
|
|
tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
|
|
|
|
/* turn IRQ back on */
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static void ahci_error_handler(struct ata_port *ap)
|
|
{
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
|
|
/* restart engine */
|
|
ahci_stop_engine(ap);
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
sata_pmp_error_handler(ap);
|
|
|
|
if (!ata_dev_enabled(ap->link.device))
|
|
ahci_stop_engine(ap);
|
|
}
|
|
|
|
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* make DMA engine forget about the failed command */
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
ahci_kick_engine(ap);
|
|
}
|
|
|
|
static void ahci_enable_fbs(struct ata_port *ap)
|
|
{
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 fbs;
|
|
int rc;
|
|
|
|
if (!pp->fbs_supported)
|
|
return;
|
|
|
|
fbs = readl(port_mmio + PORT_FBS);
|
|
if (fbs & PORT_FBS_EN) {
|
|
pp->fbs_enabled = true;
|
|
pp->fbs_last_dev = -1; /* initialization */
|
|
return;
|
|
}
|
|
|
|
rc = ahci_stop_engine(ap);
|
|
if (rc)
|
|
return;
|
|
|
|
writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
|
|
fbs = readl(port_mmio + PORT_FBS);
|
|
if (fbs & PORT_FBS_EN) {
|
|
dev_info(ap->host->dev, "FBS is enabled\n");
|
|
pp->fbs_enabled = true;
|
|
pp->fbs_last_dev = -1; /* initialization */
|
|
} else
|
|
dev_err(ap->host->dev, "Failed to enable FBS\n");
|
|
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
static void ahci_disable_fbs(struct ata_port *ap)
|
|
{
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 fbs;
|
|
int rc;
|
|
|
|
if (!pp->fbs_supported)
|
|
return;
|
|
|
|
fbs = readl(port_mmio + PORT_FBS);
|
|
if ((fbs & PORT_FBS_EN) == 0) {
|
|
pp->fbs_enabled = false;
|
|
return;
|
|
}
|
|
|
|
rc = ahci_stop_engine(ap);
|
|
if (rc)
|
|
return;
|
|
|
|
writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS);
|
|
fbs = readl(port_mmio + PORT_FBS);
|
|
if (fbs & PORT_FBS_EN)
|
|
dev_err(ap->host->dev, "Failed to disable FBS\n");
|
|
else {
|
|
dev_info(ap->host->dev, "FBS is disabled\n");
|
|
pp->fbs_enabled = false;
|
|
}
|
|
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
static void ahci_pmp_attach(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 cmd;
|
|
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
cmd |= PORT_CMD_PMP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
|
|
ahci_enable_fbs(ap);
|
|
|
|
pp->intr_mask |= PORT_IRQ_BAD_PMP;
|
|
|
|
/*
|
|
* We must not change the port interrupt mask register if the
|
|
* port is marked frozen, the value in pp->intr_mask will be
|
|
* restored later when the port is thawed.
|
|
*
|
|
* Note that during initialization, the port is marked as
|
|
* frozen since the irq handler is not yet registered.
|
|
*/
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN))
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static void ahci_pmp_detach(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 cmd;
|
|
|
|
ahci_disable_fbs(ap);
|
|
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
cmd &= ~PORT_CMD_PMP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
|
|
pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
|
|
|
|
/* see comment above in ahci_pmp_attach() */
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN))
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
int ahci_port_resume(struct ata_port *ap)
|
|
{
|
|
ahci_power_up(ap);
|
|
ahci_start_port(ap);
|
|
|
|
if (sata_pmp_attached(ap))
|
|
ahci_pmp_attach(ap);
|
|
else
|
|
ahci_pmp_detach(ap);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_port_resume);
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
|
|
{
|
|
const char *emsg = NULL;
|
|
int rc;
|
|
|
|
rc = ahci_deinit_port(ap, &emsg);
|
|
if (rc == 0)
|
|
ahci_power_down(ap);
|
|
else {
|
|
ata_port_err(ap, "%s (%d)\n", emsg, rc);
|
|
ata_port_freeze(ap);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
#endif
|
|
|
|
static int ahci_port_start(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct device *dev = ap->host->dev;
|
|
struct ahci_port_priv *pp;
|
|
void *mem;
|
|
dma_addr_t mem_dma;
|
|
size_t dma_sz, rx_fis_sz;
|
|
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
|
|
/* check FBS capability */
|
|
if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd = readl(port_mmio + PORT_CMD);
|
|
if (cmd & PORT_CMD_FBSCP)
|
|
pp->fbs_supported = true;
|
|
else if (hpriv->flags & AHCI_HFLAG_YES_FBS) {
|
|
dev_info(dev, "port %d can do FBS, forcing FBSCP\n",
|
|
ap->port_no);
|
|
pp->fbs_supported = true;
|
|
} else
|
|
dev_warn(dev, "port %d is not capable of FBS\n",
|
|
ap->port_no);
|
|
}
|
|
|
|
if (pp->fbs_supported) {
|
|
dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
|
|
rx_fis_sz = AHCI_RX_FIS_SZ * 16;
|
|
} else {
|
|
dma_sz = AHCI_PORT_PRIV_DMA_SZ;
|
|
rx_fis_sz = AHCI_RX_FIS_SZ;
|
|
}
|
|
|
|
mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
|
|
if (!mem)
|
|
return -ENOMEM;
|
|
memset(mem, 0, dma_sz);
|
|
|
|
/*
|
|
* First item in chunk of DMA memory: 32-slot command table,
|
|
* 32 bytes each in size
|
|
*/
|
|
pp->cmd_slot = mem;
|
|
pp->cmd_slot_dma = mem_dma;
|
|
|
|
mem += AHCI_CMD_SLOT_SZ;
|
|
mem_dma += AHCI_CMD_SLOT_SZ;
|
|
|
|
/*
|
|
* Second item: Received-FIS area
|
|
*/
|
|
pp->rx_fis = mem;
|
|
pp->rx_fis_dma = mem_dma;
|
|
|
|
mem += rx_fis_sz;
|
|
mem_dma += rx_fis_sz;
|
|
|
|
/*
|
|
* Third item: data area for storing a single command
|
|
* and its scatter-gather table
|
|
*/
|
|
pp->cmd_tbl = mem;
|
|
pp->cmd_tbl_dma = mem_dma;
|
|
|
|
/*
|
|
* Save off initial list of interrupts to be enabled.
|
|
* This could be changed later
|
|
*/
|
|
pp->intr_mask = DEF_PORT_IRQ;
|
|
|
|
ap->private_data = pp;
|
|
|
|
/* engage engines, captain */
|
|
return ahci_port_resume(ap);
|
|
}
|
|
|
|
static void ahci_port_stop(struct ata_port *ap)
|
|
{
|
|
const char *emsg = NULL;
|
|
int rc;
|
|
|
|
/* de-initialize port */
|
|
rc = ahci_deinit_port(ap, &emsg);
|
|
if (rc)
|
|
ata_port_warn(ap, "%s (%d)\n", emsg, rc);
|
|
}
|
|
|
|
void ahci_print_info(struct ata_host *host, const char *scc_s)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
u32 vers, cap, cap2, impl, speed;
|
|
const char *speed_s;
|
|
|
|
vers = readl(mmio + HOST_VERSION);
|
|
cap = hpriv->cap;
|
|
cap2 = hpriv->cap2;
|
|
impl = hpriv->port_map;
|
|
|
|
speed = (cap >> 20) & 0xf;
|
|
if (speed == 1)
|
|
speed_s = "1.5";
|
|
else if (speed == 2)
|
|
speed_s = "3";
|
|
else if (speed == 3)
|
|
speed_s = "6";
|
|
else
|
|
speed_s = "?";
|
|
|
|
dev_info(host->dev,
|
|
"AHCI %02x%02x.%02x%02x "
|
|
"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
|
|
,
|
|
|
|
(vers >> 24) & 0xff,
|
|
(vers >> 16) & 0xff,
|
|
(vers >> 8) & 0xff,
|
|
vers & 0xff,
|
|
|
|
((cap >> 8) & 0x1f) + 1,
|
|
(cap & 0x1f) + 1,
|
|
speed_s,
|
|
impl,
|
|
scc_s);
|
|
|
|
dev_info(host->dev,
|
|
"flags: "
|
|
"%s%s%s%s%s%s%s"
|
|
"%s%s%s%s%s%s%s"
|
|
"%s%s%s%s%s%s\n"
|
|
,
|
|
|
|
cap & HOST_CAP_64 ? "64bit " : "",
|
|
cap & HOST_CAP_NCQ ? "ncq " : "",
|
|
cap & HOST_CAP_SNTF ? "sntf " : "",
|
|
cap & HOST_CAP_MPS ? "ilck " : "",
|
|
cap & HOST_CAP_SSS ? "stag " : "",
|
|
cap & HOST_CAP_ALPM ? "pm " : "",
|
|
cap & HOST_CAP_LED ? "led " : "",
|
|
cap & HOST_CAP_CLO ? "clo " : "",
|
|
cap & HOST_CAP_ONLY ? "only " : "",
|
|
cap & HOST_CAP_PMP ? "pmp " : "",
|
|
cap & HOST_CAP_FBS ? "fbs " : "",
|
|
cap & HOST_CAP_PIO_MULTI ? "pio " : "",
|
|
cap & HOST_CAP_SSC ? "slum " : "",
|
|
cap & HOST_CAP_PART ? "part " : "",
|
|
cap & HOST_CAP_CCC ? "ccc " : "",
|
|
cap & HOST_CAP_EMS ? "ems " : "",
|
|
cap & HOST_CAP_SXS ? "sxs " : "",
|
|
cap2 & HOST_CAP2_APST ? "apst " : "",
|
|
cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
|
|
cap2 & HOST_CAP2_BOH ? "boh " : ""
|
|
);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_print_info);
|
|
|
|
void ahci_set_em_messages(struct ahci_host_priv *hpriv,
|
|
struct ata_port_info *pi)
|
|
{
|
|
u8 messages;
|
|
void __iomem *mmio = hpriv->mmio;
|
|
u32 em_loc = readl(mmio + HOST_EM_LOC);
|
|
u32 em_ctl = readl(mmio + HOST_EM_CTL);
|
|
|
|
if (!ahci_em_messages || !(hpriv->cap & HOST_CAP_EMS))
|
|
return;
|
|
|
|
messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
|
|
|
|
if (messages) {
|
|
/* store em_loc */
|
|
hpriv->em_loc = ((em_loc >> 16) * 4);
|
|
hpriv->em_buf_sz = ((em_loc & 0xff) * 4);
|
|
hpriv->em_msg_type = messages;
|
|
pi->flags |= ATA_FLAG_EM;
|
|
if (!(em_ctl & EM_CTL_ALHD))
|
|
pi->flags |= ATA_FLAG_SW_ACTIVITY;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(ahci_set_em_messages);
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("Common AHCI SATA low-level routines");
|
|
MODULE_LICENSE("GPL");
|