mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 13:41:51 +00:00
4391affa10
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240508072928.2135858-2-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
429 lines
10 KiB
C
429 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* CM3232 Ambient Light Sensor
|
|
*
|
|
* Copyright (C) 2014-2015 Capella Microsystems Inc.
|
|
* Author: Kevin Tsai <ktsai@capellamicro.com>
|
|
*
|
|
* IIO driver for CM3232 (7-bit I2C slave address 0x10).
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/init.h>
|
|
|
|
/* Registers Address */
|
|
#define CM3232_REG_ADDR_CMD 0x00
|
|
#define CM3232_REG_ADDR_ALS 0x50
|
|
#define CM3232_REG_ADDR_ID 0x53
|
|
|
|
#define CM3232_CMD_ALS_DISABLE BIT(0)
|
|
|
|
#define CM3232_CMD_ALS_IT_SHIFT 2
|
|
#define CM3232_CMD_ALS_IT_MASK (BIT(2) | BIT(3) | BIT(4))
|
|
#define CM3232_CMD_ALS_IT_DEFAULT (0x01 << CM3232_CMD_ALS_IT_SHIFT)
|
|
|
|
#define CM3232_CMD_ALS_RESET BIT(6)
|
|
|
|
#define CM3232_CMD_DEFAULT CM3232_CMD_ALS_IT_DEFAULT
|
|
|
|
#define CM3232_HW_ID 0x32
|
|
#define CM3232_CALIBSCALE_DEFAULT 100000
|
|
#define CM3232_CALIBSCALE_RESOLUTION 100000
|
|
#define CM3232_MLUX_PER_LUX 1000
|
|
|
|
#define CM3232_MLUX_PER_BIT_DEFAULT 64
|
|
#define CM3232_MLUX_PER_BIT_BASE_IT 100000
|
|
|
|
static const struct {
|
|
int val;
|
|
int val2;
|
|
u8 it;
|
|
} cm3232_als_it_scales[] = {
|
|
{0, 100000, 0}, /* 0.100000 */
|
|
{0, 200000, 1}, /* 0.200000 */
|
|
{0, 400000, 2}, /* 0.400000 */
|
|
{0, 800000, 3}, /* 0.800000 */
|
|
{1, 600000, 4}, /* 1.600000 */
|
|
{3, 200000, 5}, /* 3.200000 */
|
|
};
|
|
|
|
struct cm3232_als_info {
|
|
u8 regs_cmd_default;
|
|
u8 hw_id;
|
|
int calibscale;
|
|
int mlux_per_bit;
|
|
int mlux_per_bit_base_it;
|
|
};
|
|
|
|
static struct cm3232_als_info cm3232_als_info_default = {
|
|
.regs_cmd_default = CM3232_CMD_DEFAULT,
|
|
.hw_id = CM3232_HW_ID,
|
|
.calibscale = CM3232_CALIBSCALE_DEFAULT,
|
|
.mlux_per_bit = CM3232_MLUX_PER_BIT_DEFAULT,
|
|
.mlux_per_bit_base_it = CM3232_MLUX_PER_BIT_BASE_IT,
|
|
};
|
|
|
|
struct cm3232_chip {
|
|
struct i2c_client *client;
|
|
struct cm3232_als_info *als_info;
|
|
u8 regs_cmd;
|
|
u16 regs_als;
|
|
};
|
|
|
|
/**
|
|
* cm3232_reg_init() - Initialize CM3232
|
|
* @chip: pointer of struct cm3232_chip.
|
|
*
|
|
* Check and initialize CM3232 ambient light sensor.
|
|
*
|
|
* Return: 0 for success; otherwise for error code.
|
|
*/
|
|
static int cm3232_reg_init(struct cm3232_chip *chip)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
s32 ret;
|
|
|
|
chip->als_info = &cm3232_als_info_default;
|
|
|
|
/* Identify device */
|
|
ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ID);
|
|
if (ret < 0) {
|
|
dev_err(&chip->client->dev, "Error reading addr_id\n");
|
|
return ret;
|
|
}
|
|
|
|
if ((ret & 0xFF) != chip->als_info->hw_id)
|
|
return -ENODEV;
|
|
|
|
/* Disable and reset device */
|
|
chip->regs_cmd = CM3232_CMD_ALS_DISABLE | CM3232_CMD_ALS_RESET;
|
|
ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
|
|
chip->regs_cmd);
|
|
if (ret < 0) {
|
|
dev_err(&chip->client->dev, "Error writing reg_cmd\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Register default value */
|
|
chip->regs_cmd = chip->als_info->regs_cmd_default;
|
|
|
|
/* Configure register */
|
|
ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
|
|
chip->regs_cmd);
|
|
if (ret < 0)
|
|
dev_err(&chip->client->dev, "Error writing reg_cmd\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cm3232_read_als_it() - Get sensor integration time
|
|
* @chip: pointer of struct cm3232_chip
|
|
* @val: pointer of int to load the integration (sec).
|
|
* @val2: pointer of int to load the integration time (microsecond).
|
|
*
|
|
* Report the current integration time.
|
|
*
|
|
* Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
|
|
*/
|
|
static int cm3232_read_als_it(struct cm3232_chip *chip, int *val, int *val2)
|
|
{
|
|
u16 als_it;
|
|
int i;
|
|
|
|
als_it = chip->regs_cmd;
|
|
als_it &= CM3232_CMD_ALS_IT_MASK;
|
|
als_it >>= CM3232_CMD_ALS_IT_SHIFT;
|
|
for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
|
|
if (als_it == cm3232_als_it_scales[i].it) {
|
|
*val = cm3232_als_it_scales[i].val;
|
|
*val2 = cm3232_als_it_scales[i].val2;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* cm3232_write_als_it() - Write sensor integration time
|
|
* @chip: pointer of struct cm3232_chip.
|
|
* @val: integration time in second.
|
|
* @val2: integration time in microsecond.
|
|
*
|
|
* Convert integration time to sensor value.
|
|
*
|
|
* Return: i2c_smbus_write_byte_data command return value.
|
|
*/
|
|
static int cm3232_write_als_it(struct cm3232_chip *chip, int val, int val2)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
u16 als_it, cmd;
|
|
int i;
|
|
s32 ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
|
|
if (val == cm3232_als_it_scales[i].val &&
|
|
val2 == cm3232_als_it_scales[i].val2) {
|
|
|
|
als_it = cm3232_als_it_scales[i].it;
|
|
als_it <<= CM3232_CMD_ALS_IT_SHIFT;
|
|
|
|
cmd = chip->regs_cmd & ~CM3232_CMD_ALS_IT_MASK;
|
|
cmd |= als_it;
|
|
ret = i2c_smbus_write_byte_data(client,
|
|
CM3232_REG_ADDR_CMD,
|
|
cmd);
|
|
if (ret < 0)
|
|
return ret;
|
|
chip->regs_cmd = cmd;
|
|
return 0;
|
|
}
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* cm3232_get_lux() - report current lux value
|
|
* @chip: pointer of struct cm3232_chip.
|
|
*
|
|
* Convert sensor data to lux. It depends on integration
|
|
* time and calibscale variable.
|
|
*
|
|
* Return: Zero or positive value is lux, otherwise error code.
|
|
*/
|
|
static int cm3232_get_lux(struct cm3232_chip *chip)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
struct cm3232_als_info *als_info = chip->als_info;
|
|
int ret;
|
|
int val, val2;
|
|
int als_it;
|
|
u64 lux;
|
|
|
|
/* Calculate mlux per bit based on als_it */
|
|
ret = cm3232_read_als_it(chip, &val, &val2);
|
|
if (ret < 0)
|
|
return -EINVAL;
|
|
als_it = val * 1000000 + val2;
|
|
lux = (__force u64)als_info->mlux_per_bit;
|
|
lux *= als_info->mlux_per_bit_base_it;
|
|
lux = div_u64(lux, als_it);
|
|
|
|
ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ALS);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Error reading reg_addr_als\n");
|
|
return ret;
|
|
}
|
|
|
|
chip->regs_als = (u16)ret;
|
|
lux *= chip->regs_als;
|
|
lux *= als_info->calibscale;
|
|
lux = div_u64(lux, CM3232_CALIBSCALE_RESOLUTION);
|
|
lux = div_u64(lux, CM3232_MLUX_PER_LUX);
|
|
|
|
if (lux > 0xFFFF)
|
|
lux = 0xFFFF;
|
|
|
|
return (int)lux;
|
|
}
|
|
|
|
static int cm3232_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct cm3232_chip *chip = iio_priv(indio_dev);
|
|
struct cm3232_als_info *als_info = chip->als_info;
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_PROCESSED:
|
|
ret = cm3232_get_lux(chip);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_CALIBSCALE:
|
|
*val = als_info->calibscale;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
return cm3232_read_als_it(chip, val, val2);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int cm3232_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct cm3232_chip *chip = iio_priv(indio_dev);
|
|
struct cm3232_als_info *als_info = chip->als_info;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_CALIBSCALE:
|
|
als_info->calibscale = val;
|
|
return 0;
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
return cm3232_write_als_it(chip, val, val2);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* cm3232_get_it_available() - Get available ALS IT value
|
|
* @dev: pointer of struct device.
|
|
* @attr: pointer of struct device_attribute.
|
|
* @buf: pointer of return string buffer.
|
|
*
|
|
* Display the available integration time in second.
|
|
*
|
|
* Return: string length.
|
|
*/
|
|
static ssize_t cm3232_get_it_available(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int i, len;
|
|
|
|
for (i = 0, len = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ",
|
|
cm3232_als_it_scales[i].val,
|
|
cm3232_als_it_scales[i].val2);
|
|
return len + scnprintf(buf + len, PAGE_SIZE - len, "\n");
|
|
}
|
|
|
|
static const struct iio_chan_spec cm3232_channels[] = {
|
|
{
|
|
.type = IIO_LIGHT,
|
|
.info_mask_separate =
|
|
BIT(IIO_CHAN_INFO_PROCESSED) |
|
|
BIT(IIO_CHAN_INFO_CALIBSCALE) |
|
|
BIT(IIO_CHAN_INFO_INT_TIME),
|
|
}
|
|
};
|
|
|
|
static IIO_DEVICE_ATTR(in_illuminance_integration_time_available,
|
|
S_IRUGO, cm3232_get_it_available, NULL, 0);
|
|
|
|
static struct attribute *cm3232_attributes[] = {
|
|
&iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group cm3232_attribute_group = {
|
|
.attrs = cm3232_attributes
|
|
};
|
|
|
|
static const struct iio_info cm3232_info = {
|
|
.read_raw = &cm3232_read_raw,
|
|
.write_raw = &cm3232_write_raw,
|
|
.attrs = &cm3232_attribute_group,
|
|
};
|
|
|
|
static int cm3232_probe(struct i2c_client *client)
|
|
{
|
|
const struct i2c_device_id *id = i2c_client_get_device_id(client);
|
|
struct cm3232_chip *chip;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
chip = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
chip->client = client;
|
|
|
|
indio_dev->channels = cm3232_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(cm3232_channels);
|
|
indio_dev->info = &cm3232_info;
|
|
indio_dev->name = id->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
ret = cm3232_reg_init(chip);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"%s: register init failed\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
|
|
return iio_device_register(indio_dev);
|
|
}
|
|
|
|
static void cm3232_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
|
|
i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
|
|
CM3232_CMD_ALS_DISABLE);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id cm3232_id[] = {
|
|
{ "cm3232" },
|
|
{}
|
|
};
|
|
|
|
static int cm3232_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct cm3232_chip *chip = iio_priv(indio_dev);
|
|
struct i2c_client *client = chip->client;
|
|
int ret;
|
|
|
|
chip->regs_cmd |= CM3232_CMD_ALS_DISABLE;
|
|
ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
|
|
chip->regs_cmd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cm3232_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct cm3232_chip *chip = iio_priv(indio_dev);
|
|
struct i2c_client *client = chip->client;
|
|
int ret;
|
|
|
|
chip->regs_cmd &= ~CM3232_CMD_ALS_DISABLE;
|
|
ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
|
|
chip->regs_cmd | CM3232_CMD_ALS_RESET);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(cm3232_pm_ops, cm3232_suspend, cm3232_resume);
|
|
|
|
MODULE_DEVICE_TABLE(i2c, cm3232_id);
|
|
|
|
static const struct of_device_id cm3232_of_match[] = {
|
|
{.compatible = "capella,cm3232"},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, cm3232_of_match);
|
|
|
|
static struct i2c_driver cm3232_driver = {
|
|
.driver = {
|
|
.name = "cm3232",
|
|
.of_match_table = cm3232_of_match,
|
|
.pm = pm_sleep_ptr(&cm3232_pm_ops),
|
|
},
|
|
.id_table = cm3232_id,
|
|
.probe = cm3232_probe,
|
|
.remove = cm3232_remove,
|
|
};
|
|
|
|
module_i2c_driver(cm3232_driver);
|
|
|
|
MODULE_AUTHOR("Kevin Tsai <ktsai@capellamicro.com>");
|
|
MODULE_DESCRIPTION("CM3232 ambient light sensor driver");
|
|
MODULE_LICENSE("GPL");
|