mirror of
https://github.com/torvalds/linux.git
synced 2024-11-08 13:11:45 +00:00
884ac2978a
There is no hypercall to setup multiple MSI per PCI device. As such with these two new commits: -08261d87f7
PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto() -5ca72c4f7c
AHCI: Support multiple MSIs we would call the PHYSDEVOP_map_pirq 'nvec' times with the same contents of the PCI device. Sander discovered that we would get the same PIRQ value 'nvec' times and return said values to the caller. That of course meant that the device was configured only with one MSI and AHCI would fail with: ahci 0000:00:11.0: version 3.0 xen: registering gsi 19 triggering 0 polarity 1 xen: --> pirq=19 -> irq=19 (gsi=19) (XEN) [2013-02-27 19:43:07] IOAPIC[0]: Set PCI routing entry (6-19 -> 0x99 -> IRQ 19 Mode:1 Active:1) ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ahci: probe of 0000:00:11.0 failed with error -22 That is b/c in ahci_host_activate the second call to devm_request_threaded_irq would return -EINVAL as we passed in (on the second run) an IRQ that was never initialized. CC: stable@vger.kernel.org Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
583 lines
14 KiB
C
583 lines
14 KiB
C
/*
|
|
* Xen PCI - handle PCI (INTx) and MSI infrastructure calls for PV, HVM and
|
|
* initial domain support. We also handle the DSDT _PRT callbacks for GSI's
|
|
* used in HVM and initial domain mode (PV does not parse ACPI, so it has no
|
|
* concept of GSIs). Under PV we hook under the pnbbios API for IRQs and
|
|
* 0xcf8 PCI configuration read/write.
|
|
*
|
|
* Author: Ryan Wilson <hap9@epoch.ncsc.mil>
|
|
* Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
* Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/acpi.h>
|
|
|
|
#include <linux/io.h>
|
|
#include <asm/io_apic.h>
|
|
#include <asm/pci_x86.h>
|
|
|
|
#include <asm/xen/hypervisor.h>
|
|
|
|
#include <xen/features.h>
|
|
#include <xen/events.h>
|
|
#include <asm/xen/pci.h>
|
|
|
|
static int xen_pcifront_enable_irq(struct pci_dev *dev)
|
|
{
|
|
int rc;
|
|
int share = 1;
|
|
int pirq;
|
|
u8 gsi;
|
|
|
|
rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
|
|
if (rc < 0) {
|
|
dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
|
|
rc);
|
|
return rc;
|
|
}
|
|
/* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/
|
|
pirq = gsi;
|
|
|
|
if (gsi < NR_IRQS_LEGACY)
|
|
share = 0;
|
|
|
|
rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
|
|
if (rc < 0) {
|
|
dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n",
|
|
gsi, pirq, rc);
|
|
return rc;
|
|
}
|
|
|
|
dev->irq = rc;
|
|
dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static int xen_register_pirq(u32 gsi, int gsi_override, int triggering,
|
|
bool set_pirq)
|
|
{
|
|
int rc, pirq = -1, irq = -1;
|
|
struct physdev_map_pirq map_irq;
|
|
int shareable = 0;
|
|
char *name;
|
|
|
|
irq = xen_irq_from_gsi(gsi);
|
|
if (irq > 0)
|
|
return irq;
|
|
|
|
if (set_pirq)
|
|
pirq = gsi;
|
|
|
|
map_irq.domid = DOMID_SELF;
|
|
map_irq.type = MAP_PIRQ_TYPE_GSI;
|
|
map_irq.index = gsi;
|
|
map_irq.pirq = pirq;
|
|
|
|
rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
|
|
if (rc) {
|
|
printk(KERN_WARNING "xen map irq failed %d\n", rc);
|
|
return -1;
|
|
}
|
|
|
|
if (triggering == ACPI_EDGE_SENSITIVE) {
|
|
shareable = 0;
|
|
name = "ioapic-edge";
|
|
} else {
|
|
shareable = 1;
|
|
name = "ioapic-level";
|
|
}
|
|
|
|
if (gsi_override >= 0)
|
|
gsi = gsi_override;
|
|
|
|
irq = xen_bind_pirq_gsi_to_irq(gsi, map_irq.pirq, shareable, name);
|
|
if (irq < 0)
|
|
goto out;
|
|
|
|
printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi);
|
|
out:
|
|
return irq;
|
|
}
|
|
|
|
static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
|
|
int trigger, int polarity)
|
|
{
|
|
if (!xen_hvm_domain())
|
|
return -1;
|
|
|
|
return xen_register_pirq(gsi, -1 /* no GSI override */, trigger,
|
|
false /* no mapping of GSI to PIRQ */);
|
|
}
|
|
|
|
#ifdef CONFIG_XEN_DOM0
|
|
static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
|
|
{
|
|
int rc, irq;
|
|
struct physdev_setup_gsi setup_gsi;
|
|
|
|
if (!xen_pv_domain())
|
|
return -1;
|
|
|
|
printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
|
|
gsi, triggering, polarity);
|
|
|
|
irq = xen_register_pirq(gsi, gsi_override, triggering, true);
|
|
|
|
setup_gsi.gsi = gsi;
|
|
setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
|
|
setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
|
|
|
|
rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
|
|
if (rc == -EEXIST)
|
|
printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
|
|
else if (rc) {
|
|
printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
|
|
gsi, rc);
|
|
}
|
|
|
|
return irq;
|
|
}
|
|
|
|
static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
|
|
int trigger, int polarity)
|
|
{
|
|
return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_PCI_MSI)
|
|
#include <linux/msi.h>
|
|
#include <asm/msidef.h>
|
|
|
|
struct xen_pci_frontend_ops *xen_pci_frontend;
|
|
EXPORT_SYMBOL_GPL(xen_pci_frontend);
|
|
|
|
static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
|
|
{
|
|
int irq, ret, i;
|
|
struct msi_desc *msidesc;
|
|
int *v;
|
|
|
|
if (type == PCI_CAP_ID_MSI && nvec > 1)
|
|
return 1;
|
|
|
|
v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
|
|
if (!v)
|
|
return -ENOMEM;
|
|
|
|
if (type == PCI_CAP_ID_MSIX)
|
|
ret = xen_pci_frontend_enable_msix(dev, v, nvec);
|
|
else
|
|
ret = xen_pci_frontend_enable_msi(dev, v);
|
|
if (ret)
|
|
goto error;
|
|
i = 0;
|
|
list_for_each_entry(msidesc, &dev->msi_list, list) {
|
|
irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0,
|
|
(type == PCI_CAP_ID_MSIX) ?
|
|
"pcifront-msi-x" :
|
|
"pcifront-msi",
|
|
DOMID_SELF);
|
|
if (irq < 0) {
|
|
ret = irq;
|
|
goto free;
|
|
}
|
|
i++;
|
|
}
|
|
kfree(v);
|
|
return 0;
|
|
|
|
error:
|
|
dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
|
|
free:
|
|
kfree(v);
|
|
return ret;
|
|
}
|
|
|
|
#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
|
|
MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
|
|
|
|
static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
|
|
struct msi_msg *msg)
|
|
{
|
|
/* We set vector == 0 to tell the hypervisor we don't care about it,
|
|
* but we want a pirq setup instead.
|
|
* We use the dest_id field to pass the pirq that we want. */
|
|
msg->address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(pirq);
|
|
msg->address_lo =
|
|
MSI_ADDR_BASE_LO |
|
|
MSI_ADDR_DEST_MODE_PHYSICAL |
|
|
MSI_ADDR_REDIRECTION_CPU |
|
|
MSI_ADDR_DEST_ID(pirq);
|
|
|
|
msg->data = XEN_PIRQ_MSI_DATA;
|
|
}
|
|
|
|
static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
|
|
{
|
|
int irq, pirq;
|
|
struct msi_desc *msidesc;
|
|
struct msi_msg msg;
|
|
|
|
if (type == PCI_CAP_ID_MSI && nvec > 1)
|
|
return 1;
|
|
|
|
list_for_each_entry(msidesc, &dev->msi_list, list) {
|
|
__read_msi_msg(msidesc, &msg);
|
|
pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) |
|
|
((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
|
|
if (msg.data != XEN_PIRQ_MSI_DATA ||
|
|
xen_irq_from_pirq(pirq) < 0) {
|
|
pirq = xen_allocate_pirq_msi(dev, msidesc);
|
|
if (pirq < 0) {
|
|
irq = -ENODEV;
|
|
goto error;
|
|
}
|
|
xen_msi_compose_msg(dev, pirq, &msg);
|
|
__write_msi_msg(msidesc, &msg);
|
|
dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq);
|
|
} else {
|
|
dev_dbg(&dev->dev,
|
|
"xen: msi already bound to pirq=%d\n", pirq);
|
|
}
|
|
irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq, 0,
|
|
(type == PCI_CAP_ID_MSIX) ?
|
|
"msi-x" : "msi",
|
|
DOMID_SELF);
|
|
if (irq < 0)
|
|
goto error;
|
|
dev_dbg(&dev->dev,
|
|
"xen: msi --> pirq=%d --> irq=%d\n", pirq, irq);
|
|
}
|
|
return 0;
|
|
|
|
error:
|
|
dev_err(&dev->dev,
|
|
"Xen PCI frontend has not registered MSI/MSI-X support!\n");
|
|
return irq;
|
|
}
|
|
|
|
#ifdef CONFIG_XEN_DOM0
|
|
static bool __read_mostly pci_seg_supported = true;
|
|
|
|
static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
|
|
{
|
|
int ret = 0;
|
|
struct msi_desc *msidesc;
|
|
|
|
if (type == PCI_CAP_ID_MSI && nvec > 1)
|
|
return 1;
|
|
|
|
list_for_each_entry(msidesc, &dev->msi_list, list) {
|
|
struct physdev_map_pirq map_irq;
|
|
domid_t domid;
|
|
|
|
domid = ret = xen_find_device_domain_owner(dev);
|
|
/* N.B. Casting int's -ENODEV to uint16_t results in 0xFFED,
|
|
* hence check ret value for < 0. */
|
|
if (ret < 0)
|
|
domid = DOMID_SELF;
|
|
|
|
memset(&map_irq, 0, sizeof(map_irq));
|
|
map_irq.domid = domid;
|
|
map_irq.type = MAP_PIRQ_TYPE_MSI_SEG;
|
|
map_irq.index = -1;
|
|
map_irq.pirq = -1;
|
|
map_irq.bus = dev->bus->number |
|
|
(pci_domain_nr(dev->bus) << 16);
|
|
map_irq.devfn = dev->devfn;
|
|
|
|
if (type == PCI_CAP_ID_MSIX) {
|
|
int pos;
|
|
u32 table_offset, bir;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
|
|
|
|
pci_read_config_dword(dev, pos + PCI_MSIX_TABLE,
|
|
&table_offset);
|
|
bir = (u8)(table_offset & PCI_MSIX_FLAGS_BIRMASK);
|
|
|
|
map_irq.table_base = pci_resource_start(dev, bir);
|
|
map_irq.entry_nr = msidesc->msi_attrib.entry_nr;
|
|
}
|
|
|
|
ret = -EINVAL;
|
|
if (pci_seg_supported)
|
|
ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
|
|
&map_irq);
|
|
if (ret == -EINVAL && !pci_domain_nr(dev->bus)) {
|
|
map_irq.type = MAP_PIRQ_TYPE_MSI;
|
|
map_irq.index = -1;
|
|
map_irq.pirq = -1;
|
|
map_irq.bus = dev->bus->number;
|
|
ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
|
|
&map_irq);
|
|
if (ret != -EINVAL)
|
|
pci_seg_supported = false;
|
|
}
|
|
if (ret) {
|
|
dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n",
|
|
ret, domid);
|
|
goto out;
|
|
}
|
|
|
|
ret = xen_bind_pirq_msi_to_irq(dev, msidesc,
|
|
map_irq.pirq, map_irq.index,
|
|
(type == PCI_CAP_ID_MSIX) ?
|
|
"msi-x" : "msi",
|
|
domid);
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
ret = 0;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void xen_initdom_restore_msi_irqs(struct pci_dev *dev, int irq)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (pci_seg_supported) {
|
|
struct physdev_pci_device restore_ext;
|
|
|
|
restore_ext.seg = pci_domain_nr(dev->bus);
|
|
restore_ext.bus = dev->bus->number;
|
|
restore_ext.devfn = dev->devfn;
|
|
ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi_ext,
|
|
&restore_ext);
|
|
if (ret == -ENOSYS)
|
|
pci_seg_supported = false;
|
|
WARN(ret && ret != -ENOSYS, "restore_msi_ext -> %d\n", ret);
|
|
}
|
|
if (!pci_seg_supported) {
|
|
struct physdev_restore_msi restore;
|
|
|
|
restore.bus = dev->bus->number;
|
|
restore.devfn = dev->devfn;
|
|
ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi, &restore);
|
|
WARN(ret && ret != -ENOSYS, "restore_msi -> %d\n", ret);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void xen_teardown_msi_irqs(struct pci_dev *dev)
|
|
{
|
|
struct msi_desc *msidesc;
|
|
|
|
msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
|
|
if (msidesc->msi_attrib.is_msix)
|
|
xen_pci_frontend_disable_msix(dev);
|
|
else
|
|
xen_pci_frontend_disable_msi(dev);
|
|
|
|
/* Free the IRQ's and the msidesc using the generic code. */
|
|
default_teardown_msi_irqs(dev);
|
|
}
|
|
|
|
static void xen_teardown_msi_irq(unsigned int irq)
|
|
{
|
|
xen_destroy_irq(irq);
|
|
}
|
|
|
|
#endif
|
|
|
|
int __init pci_xen_init(void)
|
|
{
|
|
if (!xen_pv_domain() || xen_initial_domain())
|
|
return -ENODEV;
|
|
|
|
printk(KERN_INFO "PCI: setting up Xen PCI frontend stub\n");
|
|
|
|
pcibios_set_cache_line_size();
|
|
|
|
pcibios_enable_irq = xen_pcifront_enable_irq;
|
|
pcibios_disable_irq = NULL;
|
|
|
|
#ifdef CONFIG_ACPI
|
|
/* Keep ACPI out of the picture */
|
|
acpi_noirq = 1;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
|
|
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
|
|
x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int __init pci_xen_hvm_init(void)
|
|
{
|
|
if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
|
|
return 0;
|
|
|
|
#ifdef CONFIG_ACPI
|
|
/*
|
|
* We don't want to change the actual ACPI delivery model,
|
|
* just how GSIs get registered.
|
|
*/
|
|
__acpi_register_gsi = acpi_register_gsi_xen_hvm;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
|
|
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_XEN_DOM0
|
|
static __init void xen_setup_acpi_sci(void)
|
|
{
|
|
int rc;
|
|
int trigger, polarity;
|
|
int gsi = acpi_sci_override_gsi;
|
|
int irq = -1;
|
|
int gsi_override = -1;
|
|
|
|
if (!gsi)
|
|
return;
|
|
|
|
rc = acpi_get_override_irq(gsi, &trigger, &polarity);
|
|
if (rc) {
|
|
printk(KERN_WARNING "xen: acpi_get_override_irq failed for acpi"
|
|
" sci, rc=%d\n", rc);
|
|
return;
|
|
}
|
|
trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
|
|
polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
|
|
|
|
printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d "
|
|
"polarity=%d\n", gsi, trigger, polarity);
|
|
|
|
/* Before we bind the GSI to a Linux IRQ, check whether
|
|
* we need to override it with bus_irq (IRQ) value. Usually for
|
|
* IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so:
|
|
* ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
|
|
* but there are oddballs where the IRQ != GSI:
|
|
* ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
|
|
* which ends up being: gsi_to_irq[9] == 20
|
|
* (which is what acpi_gsi_to_irq ends up calling when starting the
|
|
* the ACPI interpreter and keels over since IRQ 9 has not been
|
|
* setup as we had setup IRQ 20 for it).
|
|
*/
|
|
if (acpi_gsi_to_irq(gsi, &irq) == 0) {
|
|
/* Use the provided value if it's valid. */
|
|
if (irq >= 0)
|
|
gsi_override = irq;
|
|
}
|
|
|
|
gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity);
|
|
printk(KERN_INFO "xen: acpi sci %d\n", gsi);
|
|
|
|
return;
|
|
}
|
|
|
|
int __init pci_xen_initial_domain(void)
|
|
{
|
|
int irq;
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
|
|
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
|
|
x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
|
|
#endif
|
|
xen_setup_acpi_sci();
|
|
__acpi_register_gsi = acpi_register_gsi_xen;
|
|
/* Pre-allocate legacy irqs */
|
|
for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
|
|
int trigger, polarity;
|
|
|
|
if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
|
|
continue;
|
|
|
|
xen_register_pirq(irq, -1 /* no GSI override */,
|
|
trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE,
|
|
true /* Map GSI to PIRQ */);
|
|
}
|
|
if (0 == nr_ioapics) {
|
|
for (irq = 0; irq < NR_IRQS_LEGACY; irq++)
|
|
xen_bind_pirq_gsi_to_irq(irq, irq, 0, "xt-pic");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
struct xen_device_domain_owner {
|
|
domid_t domain;
|
|
struct pci_dev *dev;
|
|
struct list_head list;
|
|
};
|
|
|
|
static DEFINE_SPINLOCK(dev_domain_list_spinlock);
|
|
static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
|
|
|
|
static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
|
|
{
|
|
struct xen_device_domain_owner *owner;
|
|
|
|
list_for_each_entry(owner, &dev_domain_list, list) {
|
|
if (owner->dev == dev)
|
|
return owner;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
int xen_find_device_domain_owner(struct pci_dev *dev)
|
|
{
|
|
struct xen_device_domain_owner *owner;
|
|
int domain = -ENODEV;
|
|
|
|
spin_lock(&dev_domain_list_spinlock);
|
|
owner = find_device(dev);
|
|
if (owner)
|
|
domain = owner->domain;
|
|
spin_unlock(&dev_domain_list_spinlock);
|
|
return domain;
|
|
}
|
|
EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
|
|
|
|
int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
|
|
{
|
|
struct xen_device_domain_owner *owner;
|
|
|
|
owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
|
|
if (!owner)
|
|
return -ENODEV;
|
|
|
|
spin_lock(&dev_domain_list_spinlock);
|
|
if (find_device(dev)) {
|
|
spin_unlock(&dev_domain_list_spinlock);
|
|
kfree(owner);
|
|
return -EEXIST;
|
|
}
|
|
owner->domain = domain;
|
|
owner->dev = dev;
|
|
list_add_tail(&owner->list, &dev_domain_list);
|
|
spin_unlock(&dev_domain_list_spinlock);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
|
|
|
|
int xen_unregister_device_domain_owner(struct pci_dev *dev)
|
|
{
|
|
struct xen_device_domain_owner *owner;
|
|
|
|
spin_lock(&dev_domain_list_spinlock);
|
|
owner = find_device(dev);
|
|
if (!owner) {
|
|
spin_unlock(&dev_domain_list_spinlock);
|
|
return -ENODEV;
|
|
}
|
|
list_del(&owner->list);
|
|
spin_unlock(&dev_domain_list_spinlock);
|
|
kfree(owner);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
|
|
#endif
|