mirror of
https://github.com/torvalds/linux.git
synced 2024-11-27 06:31:52 +00:00
d533f67185
The attached patch fixes the following spelling errors in Documentation/ - double "the" - Several misspellings of function/functionality - infomation - memeory - Recieved - wether and possibly others which I forgot ;-) Trailing whitespaces on the same line as the typo are also deleted. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
4687 lines
124 KiB
Plaintext
4687 lines
124 KiB
Plaintext
User Mode Linux HOWTO
|
||
User Mode Linux Core Team
|
||
Mon Nov 18 14:16:16 EST 2002
|
||
|
||
This document describes the use and abuse of Jeff Dike's User Mode
|
||
Linux: a port of the Linux kernel as a normal Intel Linux process.
|
||
______________________________________________________________________
|
||
|
||
Table of Contents
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
1. Introduction
|
||
|
||
1.1 How is User Mode Linux Different?
|
||
1.2 Why Would I Want User Mode Linux?
|
||
|
||
2. Compiling the kernel and modules
|
||
|
||
2.1 Compiling the kernel
|
||
2.2 Compiling and installing kernel modules
|
||
2.3 Compiling and installing uml_utilities
|
||
|
||
3. Running UML and logging in
|
||
|
||
3.1 Running UML
|
||
3.2 Logging in
|
||
3.3 Examples
|
||
|
||
4. UML on 2G/2G hosts
|
||
|
||
4.1 Introduction
|
||
4.2 The problem
|
||
4.3 The solution
|
||
|
||
5. Setting up serial lines and consoles
|
||
|
||
5.1 Specifying the device
|
||
5.2 Specifying the channel
|
||
5.3 Examples
|
||
|
||
6. Setting up the network
|
||
|
||
6.1 General setup
|
||
6.2 Userspace daemons
|
||
6.3 Specifying ethernet addresses
|
||
6.4 UML interface setup
|
||
6.5 Multicast
|
||
6.6 TUN/TAP with the uml_net helper
|
||
6.7 TUN/TAP with a preconfigured tap device
|
||
6.8 Ethertap
|
||
6.9 The switch daemon
|
||
6.10 Slip
|
||
6.11 Slirp
|
||
6.12 pcap
|
||
6.13 Setting up the host yourself
|
||
|
||
7. Sharing Filesystems between Virtual Machines
|
||
|
||
7.1 A warning
|
||
7.2 Using layered block devices
|
||
7.3 Note!
|
||
7.4 Another warning
|
||
7.5 uml_moo : Merging a COW file with its backing file
|
||
|
||
8. Creating filesystems
|
||
|
||
8.1 Create the filesystem file
|
||
8.2 Assign the file to a UML device
|
||
8.3 Creating and mounting the filesystem
|
||
|
||
9. Host file access
|
||
|
||
9.1 Using hostfs
|
||
9.2 hostfs as the root filesystem
|
||
9.3 Building hostfs
|
||
|
||
10. The Management Console
|
||
10.1 version
|
||
10.2 halt and reboot
|
||
10.3 config
|
||
10.4 remove
|
||
10.5 sysrq
|
||
10.6 help
|
||
10.7 cad
|
||
10.8 stop
|
||
10.9 go
|
||
|
||
11. Kernel debugging
|
||
|
||
11.1 Starting the kernel under gdb
|
||
11.2 Examining sleeping processes
|
||
11.3 Running ddd on UML
|
||
11.4 Debugging modules
|
||
11.5 Attaching gdb to the kernel
|
||
11.6 Using alternate debuggers
|
||
|
||
12. Kernel debugging examples
|
||
|
||
12.1 The case of the hung fsck
|
||
12.2 Episode 2: The case of the hung fsck
|
||
|
||
13. What to do when UML doesn't work
|
||
|
||
13.1 Strange compilation errors when you build from source
|
||
13.2 UML hangs on boot after mounting devfs
|
||
13.3 A variety of panics and hangs with /tmp on a reiserfs filesystem
|
||
13.4 The compile fails with errors about conflicting types for 'open', 'dup', and 'waitpid'
|
||
13.5 UML doesn't work when /tmp is an NFS filesystem
|
||
13.6 UML hangs on boot when compiled with gprof support
|
||
13.7 syslogd dies with a SIGTERM on startup
|
||
13.8 TUN/TAP networking doesn't work on a 2.4 host
|
||
13.9 You can network to the host but not to other machines on the net
|
||
13.10 I have no root and I want to scream
|
||
13.11 UML build conflict between ptrace.h and ucontext.h
|
||
13.12 The UML BogoMips is exactly half the host's BogoMips
|
||
13.13 When you run UML, it immediately segfaults
|
||
13.14 xterms appear, then immediately disappear
|
||
13.15 Any other panic, hang, or strange behavior
|
||
|
||
14. Diagnosing Problems
|
||
|
||
14.1 Case 1 : Normal kernel panics
|
||
14.2 Case 2 : Tracing thread panics
|
||
14.3 Case 3 : Tracing thread panics caused by other threads
|
||
14.4 Case 4 : Hangs
|
||
|
||
15. Thanks
|
||
|
||
15.1 Code and Documentation
|
||
15.2 Flushing out bugs
|
||
15.3 Buglets and clean-ups
|
||
15.4 Case Studies
|
||
15.5 Other contributions
|
||
|
||
|
||
______________________________________________________________________
|
||
|
||
11.. IInnttrroodduuccttiioonn
|
||
|
||
Welcome to User Mode Linux. It's going to be fun.
|
||
|
||
|
||
|
||
11..11.. HHooww iiss UUsseerr MMooddee LLiinnuuxx DDiiffffeerreenntt??
|
||
|
||
Normally, the Linux Kernel talks straight to your hardware (video
|
||
card, keyboard, hard drives, etc), and any programs which run ask the
|
||
kernel to operate the hardware, like so:
|
||
|
||
|
||
|
||
+-----------+-----------+----+
|
||
| Process 1 | Process 2 | ...|
|
||
+-----------+-----------+----+
|
||
| Linux Kernel |
|
||
+----------------------------+
|
||
| Hardware |
|
||
+----------------------------+
|
||
|
||
|
||
|
||
|
||
The User Mode Linux Kernel is different; instead of talking to the
|
||
hardware, it talks to a `real' Linux kernel (called the `host kernel'
|
||
from now on), like any other program. Programs can then run inside
|
||
User-Mode Linux as if they were running under a normal kernel, like
|
||
so:
|
||
|
||
|
||
|
||
+----------------+
|
||
| Process 2 | ...|
|
||
+-----------+----------------+
|
||
| Process 1 | User-Mode Linux|
|
||
+----------------------------+
|
||
| Linux Kernel |
|
||
+----------------------------+
|
||
| Hardware |
|
||
+----------------------------+
|
||
|
||
|
||
|
||
|
||
|
||
11..22.. WWhhyy WWoouulldd II WWaanntt UUsseerr MMooddee LLiinnuuxx??
|
||
|
||
|
||
1. If User Mode Linux crashes, your host kernel is still fine.
|
||
|
||
2. You can run a usermode kernel as a non-root user.
|
||
|
||
3. You can debug the User Mode Linux like any normal process.
|
||
|
||
4. You can run gprof (profiling) and gcov (coverage testing).
|
||
|
||
5. You can play with your kernel without breaking things.
|
||
|
||
6. You can use it as a sandbox for testing new apps.
|
||
|
||
7. You can try new development kernels safely.
|
||
|
||
8. You can run different distributions simultaneously.
|
||
|
||
9. It's extremely fun.
|
||
|
||
|
||
|
||
|
||
|
||
22.. CCoommppiilliinngg tthhee kkeerrnneell aanndd mmoodduulleess
|
||
|
||
|
||
|
||
|
||
22..11.. CCoommppiilliinngg tthhee kkeerrnneell
|
||
|
||
|
||
Compiling the user mode kernel is just like compiling any other
|
||
kernel. Let's go through the steps, using 2.4.0-prerelease (current
|
||
as of this writing) as an example:
|
||
|
||
|
||
1. Download the latest UML patch from
|
||
|
||
the download page <http://user-mode-linux.sourceforge.net/dl-
|
||
sf.html>
|
||
|
||
In this example, the file is uml-patch-2.4.0-prerelease.bz2.
|
||
|
||
|
||
2. Download the matching kernel from your favourite kernel mirror,
|
||
such as:
|
||
|
||
ftp://ftp.ca.kernel.org/pub/kernel/v2.4/linux-2.4.0-prerelease.tar.bz2
|
||
<ftp://ftp.ca.kernel.org/pub/kernel/v2.4/linux-2.4.0-prerelease.tar.bz2>
|
||
.
|
||
|
||
|
||
3. Make a directory and unpack the kernel into it.
|
||
|
||
|
||
|
||
host%
|
||
mkdir ~/uml
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host%
|
||
cd ~/uml
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host%
|
||
tar -xzvf linux-2.4.0-prerelease.tar.bz2
|
||
|
||
|
||
|
||
|
||
|
||
|
||
4. Apply the patch using
|
||
|
||
|
||
|
||
host%
|
||
cd ~/uml/linux
|
||
|
||
|
||
|
||
host%
|
||
bzcat uml-patch-2.4.0-prerelease.bz2 | patch -p1
|
||
|
||
|
||
|
||
|
||
|
||
|
||
5. Run your favorite config; `make xconfig ARCH=um' is the most
|
||
convenient. `make config ARCH=um' and 'make menuconfig ARCH=um'
|
||
will work as well. The defaults will give you a useful kernel. If
|
||
you want to change something, go ahead, it probably won't hurt
|
||
anything.
|
||
|
||
|
||
Note: If the host is configured with a 2G/2G address space split
|
||
rather than the usual 3G/1G split, then the packaged UML binaries
|
||
will not run. They will immediately segfault. See ``UML on 2G/2G
|
||
hosts'' for the scoop on running UML on your system.
|
||
|
||
|
||
|
||
6. Finish with `make linux ARCH=um': the result is a file called
|
||
`linux' in the top directory of your source tree.
|
||
|
||
Make sure that you don't build this kernel in /usr/src/linux. On some
|
||
distributions, /usr/include/asm is a link into this pool. The user-
|
||
mode build changes the other end of that link, and things that include
|
||
<asm/anything.h> stop compiling.
|
||
|
||
The sources are also available from cvs at the project's cvs page,
|
||
which has directions on getting the sources. You can also browse the
|
||
CVS pool from there.
|
||
|
||
If you get the CVS sources, you will have to check them out into an
|
||
empty directory. You will then have to copy each file into the
|
||
corresponding directory in the appropriate kernel pool.
|
||
|
||
If you don't have the latest kernel pool, you can get the
|
||
corresponding user-mode sources with
|
||
|
||
|
||
host% cvs co -r v_2_3_x linux
|
||
|
||
|
||
|
||
|
||
where 'x' is the version in your pool. Note that you will not get the
|
||
bug fixes and enhancements that have gone into subsequent releases.
|
||
|
||
|
||
If you build your own kernel, and want to boot it from one of the
|
||
filesystems distributed from this site, then, in nearly all cases,
|
||
devfs must be compiled into the kernel and mounted at boot time. The
|
||
exception is the SuSE filesystem. For this, devfs must either not be
|
||
in the kernel at all, or "devfs=nomount" must be on the kernel command
|
||
line. Any disagreement between the kernel and the filesystem being
|
||
booted about whether devfs is being used will result in the boot
|
||
getting no further than single-user mode.
|
||
|
||
|
||
If you don't want to use devfs, you can remove the need for it from a
|
||
filesystem by copying /dev from someplace, making a bunch of /dev/ubd
|
||
devices:
|
||
|
||
|
||
UML# for i in 0 1 2 3 4 5 6 7; do mknod ubd$i b 98 $i; done
|
||
|
||
|
||
|
||
|
||
and changing /etc/fstab and /etc/inittab to refer to the non-devfs
|
||
devices.
|
||
|
||
|
||
|
||
22..22.. CCoommppiilliinngg aanndd iinnssttaalllliinngg kkeerrnneell mmoodduulleess
|
||
|
||
UML modules are built in the same way as the native kernel (with the
|
||
exception of the 'ARCH=um' that you always need for UML):
|
||
|
||
|
||
host% make modules ARCH=um
|
||
|
||
|
||
|
||
|
||
Any modules that you want to load into this kernel need to be built in
|
||
the user-mode pool. Modules from the native kernel won't work.
|
||
|
||
You can install them by using ftp or something to copy them into the
|
||
virtual machine and dropping them into /lib/modules/`uname -r`.
|
||
|
||
You can also get the kernel build process to install them as follows:
|
||
|
||
1. with the kernel not booted, mount the root filesystem in the top
|
||
level of the kernel pool:
|
||
|
||
|
||
host% mount root_fs mnt -o loop
|
||
|
||
|
||
|
||
|
||
|
||
|
||
2. run
|
||
|
||
|
||
host%
|
||
make modules_install INSTALL_MOD_PATH=`pwd`/mnt ARCH=um
|
||
|
||
|
||
|
||
|
||
|
||
|
||
3. unmount the filesystem
|
||
|
||
|
||
host% umount mnt
|
||
|
||
|
||
|
||
|
||
|
||
|
||
4. boot the kernel on it
|
||
|
||
|
||
When the system is booted, you can use insmod as usual to get the
|
||
modules into the kernel. A number of things have been loaded into UML
|
||
as modules, especially filesystems and network protocols and filters,
|
||
so most symbols which need to be exported probably already are.
|
||
However, if you do find symbols that need exporting, let us
|
||
<http://user-mode-linux.sourceforge.net/contacts.html> know, and
|
||
they'll be "taken care of".
|
||
|
||
|
||
|
||
22..33.. CCoommppiilliinngg aanndd iinnssttaalllliinngg uummll__uuttiilliittiieess
|
||
|
||
Many features of the UML kernel require a user-space helper program,
|
||
so a uml_utilities package is distributed separately from the kernel
|
||
patch which provides these helpers. Included within this is:
|
||
|
||
+o port-helper - Used by consoles which connect to xterms or ports
|
||
|
||
+o tunctl - Configuration tool to create and delete tap devices
|
||
|
||
+o uml_net - Setuid binary for automatic tap device configuration
|
||
|
||
+o uml_switch - User-space virtual switch required for daemon
|
||
transport
|
||
|
||
The uml_utilities tree is compiled with:
|
||
|
||
|
||
host#
|
||
make && make install
|
||
|
||
|
||
|
||
|
||
Note that UML kernel patches may require a specific version of the
|
||
uml_utilities distribution. If you don't keep up with the mailing
|
||
lists, ensure that you have the latest release of uml_utilities if you
|
||
are experiencing problems with your UML kernel, particularly when
|
||
dealing with consoles or command-line switches to the helper programs
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
33.. RRuunnnniinngg UUMMLL aanndd llooggggiinngg iinn
|
||
|
||
|
||
|
||
33..11.. RRuunnnniinngg UUMMLL
|
||
|
||
It runs on 2.2.15 or later, and all 2.4 kernels.
|
||
|
||
|
||
Booting UML is straightforward. Simply run 'linux': it will try to
|
||
mount the file `root_fs' in the current directory. You do not need to
|
||
run it as root. If your root filesystem is not named `root_fs', then
|
||
you need to put a `ubd0=root_fs_whatever' switch on the linux command
|
||
line.
|
||
|
||
|
||
You will need a filesystem to boot UML from. There are a number
|
||
available for download from here <http://user-mode-
|
||
linux.sourceforge.net/dl-sf.html> . There are also several tools
|
||
<http://user-mode-linux.sourceforge.net/fs_making.html> which can be
|
||
used to generate UML-compatible filesystem images from media.
|
||
The kernel will boot up and present you with a login prompt.
|
||
|
||
|
||
Note: If the host is configured with a 2G/2G address space split
|
||
rather than the usual 3G/1G split, then the packaged UML binaries will
|
||
not run. They will immediately segfault. See ``UML on 2G/2G hosts''
|
||
for the scoop on running UML on your system.
|
||
|
||
|
||
|
||
33..22.. LLooggggiinngg iinn
|
||
|
||
|
||
|
||
The prepackaged filesystems have a root account with password 'root'
|
||
and a user account with password 'user'. The login banner will
|
||
generally tell you how to log in. So, you log in and you will find
|
||
yourself inside a little virtual machine. Our filesystems have a
|
||
variety of commands and utilities installed (and it is fairly easy to
|
||
add more), so you will have a lot of tools with which to poke around
|
||
the system.
|
||
|
||
There are a couple of other ways to log in:
|
||
|
||
+o On a virtual console
|
||
|
||
|
||
|
||
Each virtual console that is configured (i.e. the device exists in
|
||
/dev and /etc/inittab runs a getty on it) will come up in its own
|
||
xterm. If you get tired of the xterms, read ``Setting up serial
|
||
lines and consoles'' to see how to attach the consoles to
|
||
something else, like host ptys.
|
||
|
||
|
||
|
||
+o Over the serial line
|
||
|
||
|
||
In the boot output, find a line that looks like:
|
||
|
||
|
||
|
||
serial line 0 assigned pty /dev/ptyp1
|
||
|
||
|
||
|
||
|
||
Attach your favorite terminal program to the corresponding tty. I.e.
|
||
for minicom, the command would be
|
||
|
||
|
||
host% minicom -o -p /dev/ttyp1
|
||
|
||
|
||
|
||
|
||
|
||
|
||
+o Over the net
|
||
|
||
|
||
If the network is running, then you can telnet to the virtual
|
||
machine and log in to it. See ``Setting up the network'' to learn
|
||
about setting up a virtual network.
|
||
|
||
When you're done using it, run halt, and the kernel will bring itself
|
||
down and the process will exit.
|
||
|
||
|
||
33..33.. EExxaammpplleess
|
||
|
||
Here are some examples of UML in action:
|
||
|
||
+o A login session <http://user-mode-linux.sourceforge.net/login.html>
|
||
|
||
+o A virtual network <http://user-mode-linux.sourceforge.net/net.html>
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
44.. UUMMLL oonn 22GG//22GG hhoossttss
|
||
|
||
|
||
|
||
|
||
44..11.. IInnttrroodduuccttiioonn
|
||
|
||
|
||
Most Linux machines are configured so that the kernel occupies the
|
||
upper 1G (0xc0000000 - 0xffffffff) of the 4G address space and
|
||
processes use the lower 3G (0x00000000 - 0xbfffffff). However, some
|
||
machine are configured with a 2G/2G split, with the kernel occupying
|
||
the upper 2G (0x80000000 - 0xffffffff) and processes using the lower
|
||
2G (0x00000000 - 0x7fffffff).
|
||
|
||
|
||
|
||
|
||
44..22.. TThhee pprroobblleemm
|
||
|
||
|
||
The prebuilt UML binaries on this site will not run on 2G/2G hosts
|
||
because UML occupies the upper .5G of the 3G process address space
|
||
(0xa0000000 - 0xbfffffff). Obviously, on 2G/2G hosts, this is right
|
||
in the middle of the kernel address space, so UML won't even load - it
|
||
will immediately segfault.
|
||
|
||
|
||
|
||
|
||
44..33.. TThhee ssoolluuttiioonn
|
||
|
||
|
||
The fix for this is to rebuild UML from source after enabling
|
||
CONFIG_HOST_2G_2G (under 'General Setup'). This will cause UML to
|
||
load itself in the top .5G of that smaller process address space,
|
||
where it will run fine. See ``Compiling the kernel and modules'' if
|
||
you need help building UML from source.
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
55.. SSeettttiinngg uupp sseerriiaall lliinneess aanndd ccoonnssoolleess
|
||
|
||
|
||
It is possible to attach UML serial lines and consoles to many types
|
||
of host I/O channels by specifying them on the command line.
|
||
|
||
|
||
You can attach them to host ptys, ttys, file descriptors, and ports.
|
||
This allows you to do things like
|
||
|
||
+o have a UML console appear on an unused host console,
|
||
|
||
+o hook two virtual machines together by having one attach to a pty
|
||
and having the other attach to the corresponding tty
|
||
|
||
+o make a virtual machine accessible from the net by attaching a
|
||
console to a port on the host.
|
||
|
||
|
||
The general format of the command line option is device=channel.
|
||
|
||
|
||
|
||
55..11.. SSppeecciiffyyiinngg tthhee ddeevviiccee
|
||
|
||
Devices are specified with "con" or "ssl" (console or serial line,
|
||
respectively), optionally with a device number if you are talking
|
||
about a specific device.
|
||
|
||
|
||
Using just "con" or "ssl" describes all of the consoles or serial
|
||
lines. If you want to talk about console #3 or serial line #10, they
|
||
would be "con3" and "ssl10", respectively.
|
||
|
||
|
||
A specific device name will override a less general "con=" or "ssl=".
|
||
So, for example, you can assign a pty to each of the serial lines
|
||
except for the first two like this:
|
||
|
||
|
||
ssl=pty ssl0=tty:/dev/tty0 ssl1=tty:/dev/tty1
|
||
|
||
|
||
|
||
|
||
The specificity of the device name is all that matters; order on the
|
||
command line is irrelevant.
|
||
|
||
|
||
|
||
55..22.. SSppeecciiffyyiinngg tthhee cchhaannnneell
|
||
|
||
There are a number of different types of channels to attach a UML
|
||
device to, each with a different way of specifying exactly what to
|
||
attach to.
|
||
|
||
+o pseudo-terminals - device=pty pts terminals - device=pts
|
||
|
||
|
||
This will cause UML to allocate a free host pseudo-terminal for the
|
||
device. The terminal that it got will be announced in the boot
|
||
log. You access it by attaching a terminal program to the
|
||
corresponding tty:
|
||
|
||
+o screen /dev/pts/n
|
||
|
||
+o screen /dev/ttyxx
|
||
|
||
+o minicom -o -p /dev/ttyxx - minicom seems not able to handle pts
|
||
devices
|
||
|
||
+o kermit - start it up, 'open' the device, then 'connect'
|
||
|
||
|
||
|
||
|
||
|
||
+o terminals - device=tty:tty device file
|
||
|
||
|
||
This will make UML attach the device to the specified tty (i.e
|
||
|
||
|
||
con1=tty:/dev/tty3
|
||
|
||
|
||
|
||
|
||
will attach UML's console 1 to the host's /dev/tty3). If the tty that
|
||
you specify is the slave end of a tty/pty pair, something else must
|
||
have already opened the corresponding pty in order for this to work.
|
||
|
||
|
||
|
||
|
||
|
||
+o xterms - device=xterm
|
||
|
||
|
||
UML will run an xterm and the device will be attached to it.
|
||
|
||
|
||
|
||
|
||
|
||
+o Port - device=port:port number
|
||
|
||
|
||
This will attach the UML devices to the specified host port.
|
||
Attaching console 1 to the host's port 9000 would be done like
|
||
this:
|
||
|
||
|
||
con1=port:9000
|
||
|
||
|
||
|
||
|
||
Attaching all the serial lines to that port would be done similarly:
|
||
|
||
|
||
ssl=port:9000
|
||
|
||
|
||
|
||
|
||
You access these devices by telnetting to that port. Each active tel-
|
||
net session gets a different device. If there are more telnets to a
|
||
port than UML devices attached to it, then the extra telnet sessions
|
||
will block until an existing telnet detaches, or until another device
|
||
becomes active (i.e. by being activated in /etc/inittab).
|
||
|
||
This channel has the advantage that you can both attach multiple UML
|
||
devices to it and know how to access them without reading the UML boot
|
||
log. It is also unique in allowing access to a UML from remote
|
||
machines without requiring that the UML be networked. This could be
|
||
useful in allowing public access to UMLs because they would be
|
||
accessible from the net, but wouldn't need any kind of network
|
||
filtering or access control because they would have no network access.
|
||
|
||
|
||
If you attach the main console to a portal, then the UML boot will
|
||
appear to hang. In reality, it's waiting for a telnet to connect, at
|
||
which point the boot will proceed.
|
||
|
||
|
||
|
||
|
||
|
||
+o already-existing file descriptors - device=file descriptor
|
||
|
||
|
||
If you set up a file descriptor on the UML command line, you can
|
||
attach a UML device to it. This is most commonly used to put the
|
||
main console back on stdin and stdout after assigning all the other
|
||
consoles to something else:
|
||
|
||
|
||
con0=fd:0,fd:1 con=pts
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
+o Nothing - device=null
|
||
|
||
|
||
This allows the device to be opened, in contrast to 'none', but
|
||
reads will block, and writes will succeed and the data will be
|
||
thrown out.
|
||
|
||
|
||
|
||
|
||
|
||
+o None - device=none
|
||
|
||
|
||
This causes the device to disappear. If you are using devfs, the
|
||
device will not appear in /dev. If not, then attempts to open it
|
||
will return -ENODEV.
|
||
|
||
|
||
|
||
You can also specify different input and output channels for a device
|
||
by putting a comma between them:
|
||
|
||
|
||
ssl3=tty:/dev/tty2,xterm
|
||
|
||
|
||
|
||
|
||
will cause serial line 3 to accept input on the host's /dev/tty3 and
|
||
display output on an xterm. That's a silly example - the most common
|
||
use of this syntax is to reattach the main console to stdin and stdout
|
||
as shown above.
|
||
|
||
|
||
If you decide to move the main console away from stdin/stdout, the
|
||
initial boot output will appear in the terminal that you're running
|
||
UML in. However, once the console driver has been officially
|
||
initialized, then the boot output will start appearing wherever you
|
||
specified that console 0 should be. That device will receive all
|
||
subsequent output.
|
||
|
||
|
||
|
||
55..33.. EExxaammpplleess
|
||
|
||
There are a number of interesting things you can do with this
|
||
capability.
|
||
|
||
|
||
First, this is how you get rid of those bleeding console xterms by
|
||
attaching them to host ptys:
|
||
|
||
|
||
con=pty con0=fd:0,fd:1
|
||
|
||
|
||
|
||
|
||
This will make a UML console take over an unused host virtual console,
|
||
so that when you switch to it, you will see the UML login prompt
|
||
rather than the host login prompt:
|
||
|
||
|
||
con1=tty:/dev/tty6
|
||
|
||
|
||
|
||
|
||
You can attach two virtual machines together with what amounts to a
|
||
serial line as follows:
|
||
|
||
Run one UML with a serial line attached to a pty -
|
||
|
||
|
||
ssl1=pty
|
||
|
||
|
||
|
||
|
||
Look at the boot log to see what pty it got (this example will assume
|
||
that it got /dev/ptyp1).
|
||
|
||
Boot the other UML with a serial line attached to the corresponding
|
||
tty -
|
||
|
||
|
||
ssl1=tty:/dev/ttyp1
|
||
|
||
|
||
|
||
|
||
Log in, make sure that it has no getty on that serial line, attach a
|
||
terminal program like minicom to it, and you should see the login
|
||
prompt of the other virtual machine.
|
||
|
||
|
||
66.. SSeettttiinngg uupp tthhee nneettwwoorrkk
|
||
|
||
|
||
|
||
This page describes how to set up the various transports and to
|
||
provide a UML instance with network access to the host, other machines
|
||
on the local net, and the rest of the net.
|
||
|
||
|
||
As of 2.4.5, UML networking has been completely redone to make it much
|
||
easier to set up, fix bugs, and add new features.
|
||
|
||
|
||
There is a new helper, uml_net, which does the host setup that
|
||
requires root privileges.
|
||
|
||
|
||
There are currently five transport types available for a UML virtual
|
||
machine to exchange packets with other hosts:
|
||
|
||
+o ethertap
|
||
|
||
+o TUN/TAP
|
||
|
||
+o Multicast
|
||
|
||
+o a switch daemon
|
||
|
||
+o slip
|
||
|
||
+o slirp
|
||
|
||
+o pcap
|
||
|
||
The TUN/TAP, ethertap, slip, and slirp transports allow a UML
|
||
instance to exchange packets with the host. They may be directed
|
||
to the host or the host may just act as a router to provide access
|
||
to other physical or virtual machines.
|
||
|
||
|
||
The pcap transport is a synthetic read-only interface, using the
|
||
libpcap binary to collect packets from interfaces on the host and
|
||
filter them. This is useful for building preconfigured traffic
|
||
monitors or sniffers.
|
||
|
||
|
||
The daemon and multicast transports provide a completely virtual
|
||
network to other virtual machines. This network is completely
|
||
disconnected from the physical network unless one of the virtual
|
||
machines on it is acting as a gateway.
|
||
|
||
|
||
With so many host transports, which one should you use? Here's when
|
||
you should use each one:
|
||
|
||
+o ethertap - if you want access to the host networking and it is
|
||
running 2.2
|
||
|
||
+o TUN/TAP - if you want access to the host networking and it is
|
||
running 2.4. Also, the TUN/TAP transport is able to use a
|
||
preconfigured device, allowing it to avoid using the setuid uml_net
|
||
helper, which is a security advantage.
|
||
|
||
+o Multicast - if you want a purely virtual network and you don't want
|
||
to set up anything but the UML
|
||
|
||
+o a switch daemon - if you want a purely virtual network and you
|
||
don't mind running the daemon in order to get somewhat better
|
||
performance
|
||
|
||
+o slip - there is no particular reason to run the slip backend unless
|
||
ethertap and TUN/TAP are just not available for some reason
|
||
|
||
+o slirp - if you don't have root access on the host to setup
|
||
networking, or if you don't want to allocate an IP to your UML
|
||
|
||
+o pcap - not much use for actual network connectivity, but great for
|
||
monitoring traffic on the host
|
||
|
||
Ethertap is available on 2.4 and works fine. TUN/TAP is preferred
|
||
to it because it has better performance and ethertap is officially
|
||
considered obsolete in 2.4. Also, the root helper only needs to
|
||
run occasionally for TUN/TAP, rather than handling every packet, as
|
||
it does with ethertap. This is a slight security advantage since
|
||
it provides fewer opportunities for a nasty UML user to somehow
|
||
exploit the helper's root privileges.
|
||
|
||
|
||
66..11.. GGeenneerraall sseettuupp
|
||
|
||
First, you must have the virtual network enabled in your UML. If are
|
||
running a prebuilt kernel from this site, everything is already
|
||
enabled. If you build the kernel yourself, under the "Network device
|
||
support" menu, enable "Network device support", and then the three
|
||
transports.
|
||
|
||
|
||
The next step is to provide a network device to the virtual machine.
|
||
This is done by describing it on the kernel command line.
|
||
|
||
The general format is
|
||
|
||
|
||
eth <n> = <transport> , <transport args>
|
||
|
||
|
||
|
||
|
||
For example, a virtual ethernet device may be attached to a host
|
||
ethertap device as follows:
|
||
|
||
|
||
eth0=ethertap,tap0,fe:fd:0:0:0:1,192.168.0.254
|
||
|
||
|
||
|
||
|
||
This sets up eth0 inside the virtual machine to attach itself to the
|
||
host /dev/tap0, assigns it an ethernet address, and assigns the host
|
||
tap0 interface an IP address.
|
||
|
||
|
||
|
||
Note that the IP address you assign to the host end of the tap device
|
||
must be different than the IP you assign to the eth device inside UML.
|
||
If you are short on IPs and don't want to comsume two per UML, then
|
||
you can reuse the host's eth IP address for the host ends of the tap
|
||
devices. Internally, the UMLs must still get unique IPs for their eth
|
||
devices. You can also give the UMLs non-routable IPs (192.168.x.x or
|
||
10.x.x.x) and have the host masquerade them. This will let outgoing
|
||
connections work, but incoming connections won't without more work,
|
||
such as port forwarding from the host.
|
||
Also note that when you configure the host side of an interface, it is
|
||
only acting as a gateway. It will respond to pings sent to it
|
||
locally, but is not useful to do that since it's a host interface.
|
||
You are not talking to the UML when you ping that interface and get a
|
||
response.
|
||
|
||
|
||
You can also add devices to a UML and remove them at runtime. See the
|
||
``The Management Console'' page for details.
|
||
|
||
|
||
The sections below describe this in more detail.
|
||
|
||
|
||
Once you've decided how you're going to set up the devices, you boot
|
||
UML, log in, configure the UML side of the devices, and set up routes
|
||
to the outside world. At that point, you will be able to talk to any
|
||
other machines, physical or virtual, on the net.
|
||
|
||
|
||
If ifconfig inside UML fails and the network refuses to come up, run
|
||
tell you what went wrong.
|
||
|
||
|
||
|
||
66..22.. UUsseerrssppaaccee ddaaeemmoonnss
|
||
|
||
You will likely need the setuid helper, or the switch daemon, or both.
|
||
They are both installed with the RPM and deb, so if you've installed
|
||
either, you can skip the rest of this section.
|
||
|
||
|
||
If not, then you need to check them out of CVS, build them, and
|
||
install them. The helper is uml_net, in CVS /tools/uml_net, and the
|
||
daemon is uml_switch, in CVS /tools/uml_router. They are both built
|
||
with a plain 'make'. Both need to be installed in a directory that's
|
||
in your path - /usr/bin is recommend. On top of that, uml_net needs
|
||
to be setuid root.
|
||
|
||
|
||
|
||
66..33.. SSppeecciiffyyiinngg eetthheerrnneett aaddddrreesssseess
|
||
|
||
Below, you will see that the TUN/TAP, ethertap, and daemon interfaces
|
||
allow you to specify hardware addresses for the virtual ethernet
|
||
devices. This is generally not necessary. If you don't have a
|
||
specific reason to do it, you probably shouldn't. If one is not
|
||
specified on the command line, the driver will assign one based on the
|
||
device IP address. It will provide the address fe:fd:nn:nn:nn:nn
|
||
where nn.nn.nn.nn is the device IP address. This is nearly always
|
||
sufficient to guarantee a unique hardware address for the device. A
|
||
couple of exceptions are:
|
||
|
||
+o Another set of virtual ethernet devices are on the same network and
|
||
they are assigned hardware addresses using a different scheme which
|
||
may conflict with the UML IP address-based scheme
|
||
|
||
+o You aren't going to use the device for IP networking, so you don't
|
||
assign the device an IP address
|
||
|
||
If you let the driver provide the hardware address, you should make
|
||
sure that the device IP address is known before the interface is
|
||
brought up. So, inside UML, this will guarantee that:
|
||
|
||
|
||
|
||
UML#
|
||
ifconfig eth0 192.168.0.250 up
|
||
|
||
|
||
|
||
|
||
If you decide to assign the hardware address yourself, make sure that
|
||
the first byte of the address is even. Addresses with an odd first
|
||
byte are broadcast addresses, which you don't want assigned to a
|
||
device.
|
||
|
||
|
||
|
||
66..44.. UUMMLL iinntteerrffaaccee sseettuupp
|
||
|
||
Once the network devices have been described on the command line, you
|
||
should boot UML and log in.
|
||
|
||
|
||
The first thing to do is bring the interface up:
|
||
|
||
|
||
UML# ifconfig ethn ip-address up
|
||
|
||
|
||
|
||
|
||
You should be able to ping the host at this point.
|
||
|
||
|
||
To reach the rest of the world, you should set a default route to the
|
||
host:
|
||
|
||
|
||
UML# route add default gw host ip
|
||
|
||
|
||
|
||
|
||
Again, with host ip of 192.168.0.4:
|
||
|
||
|
||
UML# route add default gw 192.168.0.4
|
||
|
||
|
||
|
||
|
||
This page used to recommend setting a network route to your local net.
|
||
This is wrong, because it will cause UML to try to figure out hardware
|
||
addresses of the local machines by arping on the interface to the
|
||
host. Since that interface is basically a single strand of ethernet
|
||
with two nodes on it (UML and the host) and arp requests don't cross
|
||
networks, they will fail to elicit any responses. So, what you want
|
||
is for UML to just blindly throw all packets at the host and let it
|
||
figure out what to do with them, which is what leaving out the network
|
||
route and adding the default route does.
|
||
|
||
|
||
Note: If you can't communicate with other hosts on your physical
|
||
ethernet, it's probably because of a network route that's
|
||
automatically set up. If you run 'route -n' and see a route that
|
||
looks like this:
|
||
|
||
|
||
|
||
|
||
Destination Gateway Genmask Flags Metric Ref Use Iface
|
||
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
|
||
|
||
|
||
|
||
|
||
with a mask that's not 255.255.255.255, then replace it with a route
|
||
to your host:
|
||
|
||
|
||
UML#
|
||
route del -net 192.168.0.0 dev eth0 netmask 255.255.255.0
|
||
|
||
|
||
|
||
|
||
|
||
|
||
UML#
|
||
route add -host 192.168.0.4 dev eth0
|
||
|
||
|
||
|
||
|
||
This, plus the default route to the host, will allow UML to exchange
|
||
packets with any machine on your ethernet.
|
||
|
||
|
||
|
||
66..55.. MMuullttiiccaasstt
|
||
|
||
The simplest way to set up a virtual network between multiple UMLs is
|
||
to use the mcast transport. This was written by Harald Welte and is
|
||
present in UML version 2.4.5-5um and later. Your system must have
|
||
multicast enabled in the kernel and there must be a multicast-capable
|
||
network device on the host. Normally, this is eth0, but if there is
|
||
no ethernet card on the host, then you will likely get strange error
|
||
messages when you bring the device up inside UML.
|
||
|
||
|
||
To use it, run two UMLs with
|
||
|
||
|
||
eth0=mcast
|
||
|
||
|
||
|
||
|
||
on their command lines. Log in, configure the ethernet device in each
|
||
machine with different IP addresses:
|
||
|
||
|
||
UML1# ifconfig eth0 192.168.0.254
|
||
|
||
|
||
|
||
|
||
|
||
|
||
UML2# ifconfig eth0 192.168.0.253
|
||
|
||
|
||
|
||
|
||
and they should be able to talk to each other.
|
||
|
||
The full set of command line options for this transport are
|
||
|
||
|
||
|
||
ethn=mcast,ethernet address,multicast
|
||
address,multicast port,ttl
|
||
|
||
|
||
|
||
|
||
Harald's original README is here <http://user-mode-linux.source-
|
||
forge.net/text/mcast.txt> and explains these in detail, as well as
|
||
some other issues.
|
||
|
||
|
||
|
||
66..66.. TTUUNN//TTAAPP wwiitthh tthhee uummll__nneett hheellppeerr
|
||
|
||
TUN/TAP is the preferred mechanism on 2.4 to exchange packets with the
|
||
host. The TUN/TAP backend has been in UML since 2.4.9-3um.
|
||
|
||
|
||
The easiest way to get up and running is to let the setuid uml_net
|
||
helper do the host setup for you. This involves insmod-ing the tun.o
|
||
module if necessary, configuring the device, and setting up IP
|
||
forwarding, routing, and proxy arp. If you are new to UML networking,
|
||
do this first. If you're concerned about the security implications of
|
||
the setuid helper, use it to get up and running, then read the next
|
||
section to see how to have UML use a preconfigured tap device, which
|
||
avoids the use of uml_net.
|
||
|
||
|
||
If you specify an IP address for the host side of the device, the
|
||
uml_net helper will do all necessary setup on the host - the only
|
||
requirement is that TUN/TAP be available, either built in to the host
|
||
kernel or as the tun.o module.
|
||
|
||
The format of the command line switch to attach a device to a TUN/TAP
|
||
device is
|
||
|
||
|
||
eth <n> =tuntap,,, <IP address>
|
||
|
||
|
||
|
||
|
||
For example, this argument will attach the UML's eth0 to the next
|
||
available tap device and assign an ethernet address to it based on its
|
||
IP address
|
||
|
||
|
||
eth0=tuntap,,,192.168.0.254
|
||
|
||
|
||
|
||
|
||
|
||
|
||
Note that the IP address that must be used for the eth device inside
|
||
UML is fixed by the routing and proxy arp that is set up on the
|
||
TUN/TAP device on the host. You can use a different one, but it won't
|
||
work because reply packets won't reach the UML. This is a feature.
|
||
It prevents a nasty UML user from doing things like setting the UML IP
|
||
to the same as the network's nameserver or mail server.
|
||
|
||
|
||
There are a couple potential problems with running the TUN/TAP
|
||
transport on a 2.4 host kernel
|
||
|
||
+o TUN/TAP seems not to work on 2.4.3 and earlier. Upgrade the host
|
||
kernel or use the ethertap transport.
|
||
|
||
+o With an upgraded kernel, TUN/TAP may fail with
|
||
|
||
|
||
File descriptor in bad state
|
||
|
||
|
||
|
||
|
||
This is due to a header mismatch between the upgraded kernel and the
|
||
kernel that was originally installed on the machine. The fix is to
|
||
make sure that /usr/src/linux points to the headers for the running
|
||
kernel.
|
||
|
||
These were pointed out by Tim Robinson <timro at trkr dot net> in
|
||
<http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="this uml-
|
||
user post"> .
|
||
|
||
|
||
|
||
66..77.. TTUUNN//TTAAPP wwiitthh aa pprreeccoonnffiigguurreedd ttaapp ddeevviiccee
|
||
|
||
If you prefer not to have UML use uml_net (which is somewhat
|
||
insecure), with UML 2.4.17-11, you can set up a TUN/TAP device
|
||
beforehand. The setup needs to be done as root, but once that's done,
|
||
there is no need for root assistance. Setting up the device is done
|
||
as follows:
|
||
|
||
+o Create the device with tunctl (available from the UML utilities
|
||
tarball)
|
||
|
||
|
||
|
||
|
||
host# tunctl -u uid
|
||
|
||
|
||
|
||
|
||
where uid is the user id or username that UML will be run as. This
|
||
will tell you what device was created.
|
||
|
||
+o Configure the device IP (change IP addresses and device name to
|
||
suit)
|
||
|
||
|
||
|
||
|
||
host# ifconfig tap0 192.168.0.254 up
|
||
|
||
|
||
|
||
|
||
|
||
+o Set up routing and arping if desired - this is my recipe, there are
|
||
other ways of doing the same thing
|
||
|
||
|
||
host#
|
||
bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
|
||
|
||
host#
|
||
route add -host 192.168.0.253 dev tap0
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
bash -c 'echo 1 > /proc/sys/net/ipv4/conf/tap0/proxy_arp'
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
arp -Ds 192.168.0.253 eth0 pub
|
||
|
||
|
||
|
||
|
||
Note that this must be done every time the host boots - this configu-
|
||
ration is not stored across host reboots. So, it's probably a good
|
||
idea to stick it in an rc file. An even better idea would be a little
|
||
utility which reads the information from a config file and sets up
|
||
devices at boot time.
|
||
|
||
+o Rather than using up two IPs and ARPing for one of them, you can
|
||
also provide direct access to your LAN by the UML by using a
|
||
bridge.
|
||
|
||
|
||
host#
|
||
brctl addbr br0
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
ifconfig eth0 0.0.0.0 promisc up
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
ifconfig tap0 0.0.0.0 promisc up
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
ifconfig br0 192.168.0.1 netmask 255.255.255.0 up
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
brctl stp br0 off
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
brctl setfd br0 1
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
brctl sethello br0 1
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
brctl addif br0 eth0
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
brctl addif br0 tap0
|
||
|
||
|
||
|
||
|
||
Note that 'br0' should be setup using ifconfig with the existing IP
|
||
address of eth0, as eth0 no longer has its own IP.
|
||
|
||
+o
|
||
|
||
|
||
Also, the /dev/net/tun device must be writable by the user running
|
||
UML in order for the UML to use the device that's been configured
|
||
for it. The simplest thing to do is
|
||
|
||
|
||
host# chmod 666 /dev/net/tun
|
||
|
||
|
||
|
||
|
||
Making it world-writeable looks bad, but it seems not to be
|
||
exploitable as a security hole. However, it does allow anyone to cre-
|
||
ate useless tap devices (useless because they can't configure them),
|
||
which is a DOS attack. A somewhat more secure alternative would to be
|
||
to create a group containing all the users who have preconfigured tap
|
||
devices and chgrp /dev/net/tun to that group with mode 664 or 660.
|
||
|
||
|
||
+o Once the device is set up, run UML with 'eth0=tuntap,device name'
|
||
(i.e. 'eth0=tuntap,tap0') on the command line (or do it with the
|
||
mconsole config command).
|
||
|
||
+o Bring the eth device up in UML and you're in business.
|
||
|
||
If you don't want that tap device any more, you can make it non-
|
||
persistent with
|
||
|
||
|
||
host# tunctl -d tap device
|
||
|
||
|
||
|
||
|
||
Finally, tunctl has a -b (for brief mode) switch which causes it to
|
||
output only the name of the tap device it created. This makes it
|
||
suitable for capture by a script:
|
||
|
||
|
||
host# TAP=`tunctl -u 1000 -b`
|
||
|
||
|
||
|
||
|
||
|
||
|
||
66..88.. EEtthheerrttaapp
|
||
|
||
Ethertap is the general mechanism on 2.2 for userspace processes to
|
||
exchange packets with the kernel.
|
||
|
||
|
||
|
||
To use this transport, you need to describe the virtual network device
|
||
on the UML command line. The general format for this is
|
||
|
||
|
||
eth <n> =ethertap, <device> , <ethernet address> , <tap IP address>
|
||
|
||
|
||
|
||
|
||
So, the previous example
|
||
|
||
|
||
eth0=ethertap,tap0,fe:fd:0:0:0:1,192.168.0.254
|
||
|
||
|
||
|
||
|
||
attaches the UML eth0 device to the host /dev/tap0, assigns it the
|
||
ethernet address fe:fd:0:0:0:1, and assigns the IP address
|
||
192.168.0.254 to the tap device.
|
||
|
||
|
||
|
||
The tap device is mandatory, but the others are optional. If the
|
||
ethernet address is omitted, one will be assigned to it.
|
||
|
||
|
||
The presence of the tap IP address will cause the helper to run and do
|
||
whatever host setup is needed to allow the virtual machine to
|
||
communicate with the outside world. If you're not sure you know what
|
||
you're doing, this is the way to go.
|
||
|
||
|
||
If it is absent, then you must configure the tap device and whatever
|
||
arping and routing you will need on the host. However, even in this
|
||
case, the uml_net helper still needs to be in your path and it must be
|
||
setuid root if you're not running UML as root. This is because the
|
||
tap device doesn't support SIGIO, which UML needs in order to use
|
||
something as a source of input. So, the helper is used as a
|
||
convenient asynchronous IO thread.
|
||
|
||
If you're using the uml_net helper, you can ignore the following host
|
||
setup - uml_net will do it for you. You just need to make sure you
|
||
have ethertap available, either built in to the host kernel or
|
||
available as a module.
|
||
|
||
|
||
If you want to set things up yourself, you need to make sure that the
|
||
appropriate /dev entry exists. If it doesn't, become root and create
|
||
it as follows:
|
||
|
||
|
||
mknod /dev/tap <minor> c 36 <minor> + 16
|
||
|
||
|
||
|
||
|
||
For example, this is how to create /dev/tap0:
|
||
|
||
|
||
mknod /dev/tap0 c 36 0 + 16
|
||
|
||
|
||
|
||
|
||
You also need to make sure that the host kernel has ethertap support.
|
||
If ethertap is enabled as a module, you apparently need to insmod
|
||
ethertap once for each ethertap device you want to enable. So,
|
||
|
||
|
||
host#
|
||
insmod ethertap
|
||
|
||
|
||
|
||
|
||
will give you the tap0 interface. To get the tap1 interface, you need
|
||
to run
|
||
|
||
|
||
host#
|
||
insmod ethertap unit=1 -o ethertap1
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
66..99.. TThhee sswwiittcchh ddaaeemmoonn
|
||
|
||
NNoottee: This is the daemon formerly known as uml_router, but which was
|
||
renamed so the network weenies of the world would stop growling at me.
|
||
|
||
|
||
The switch daemon, uml_switch, provides a mechanism for creating a
|
||
totally virtual network. By default, it provides no connection to the
|
||
host network (but see -tap, below).
|
||
|
||
|
||
The first thing you need to do is run the daemon. Running it with no
|
||
arguments will make it listen on a default pair of unix domain
|
||
sockets.
|
||
|
||
|
||
If you want it to listen on a different pair of sockets, use
|
||
|
||
|
||
-unix control socket data socket
|
||
|
||
|
||
|
||
|
||
|
||
If you want it to act as a hub rather than a switch, use
|
||
|
||
|
||
-hub
|
||
|
||
|
||
|
||
|
||
|
||
If you want the switch to be connected to host networking (allowing
|
||
the umls to get access to the outside world through the host), use
|
||
|
||
|
||
-tap tap0
|
||
|
||
|
||
|
||
|
||
|
||
Note that the tap device must be preconfigured (see "TUN/TAP with a
|
||
preconfigured tap device", above). If you're using a different tap
|
||
device than tap0, specify that instead of tap0.
|
||
|
||
|
||
uml_switch can be backgrounded as follows
|
||
|
||
|
||
host%
|
||
uml_switch [ options ] < /dev/null > /dev/null
|
||
|
||
|
||
|
||
|
||
The reason it doesn't background by default is that it listens to
|
||
stdin for EOF. When it sees that, it exits.
|
||
|
||
|
||
The general format of the kernel command line switch is
|
||
|
||
|
||
|
||
ethn=daemon,ethernet address,socket
|
||
type,control socket,data socket
|
||
|
||
|
||
|
||
|
||
You can leave off everything except the 'daemon'. You only need to
|
||
specify the ethernet address if the one that will be assigned to it
|
||
isn't acceptable for some reason. The rest of the arguments describe
|
||
how to communicate with the daemon. You should only specify them if
|
||
you told the daemon to use different sockets than the default. So, if
|
||
you ran the daemon with no arguments, running the UML on the same
|
||
machine with
|
||
eth0=daemon
|
||
|
||
|
||
|
||
|
||
will cause the eth0 driver to attach itself to the daemon correctly.
|
||
|
||
|
||
|
||
66..1100.. SSlliipp
|
||
|
||
Slip is another, less general, mechanism for a process to communicate
|
||
with the host networking. In contrast to the ethertap interface,
|
||
which exchanges ethernet frames with the host and can be used to
|
||
transport any higher-level protocol, it can only be used to transport
|
||
IP.
|
||
|
||
|
||
The general format of the command line switch is
|
||
|
||
|
||
|
||
ethn=slip,slip IP
|
||
|
||
|
||
|
||
|
||
The slip IP argument is the IP address that will be assigned to the
|
||
host end of the slip device. If it is specified, the helper will run
|
||
and will set up the host so that the virtual machine can reach it and
|
||
the rest of the network.
|
||
|
||
|
||
There are some oddities with this interface that you should be aware
|
||
of. You should only specify one slip device on a given virtual
|
||
machine, and its name inside UML will be 'umn', not 'eth0' or whatever
|
||
you specified on the command line. These problems will be fixed at
|
||
some point.
|
||
|
||
|
||
|
||
66..1111.. SSlliirrpp
|
||
|
||
slirp uses an external program, usually /usr/bin/slirp, to provide IP
|
||
only networking connectivity through the host. This is similar to IP
|
||
masquerading with a firewall, although the translation is performed in
|
||
user-space, rather than by the kernel. As slirp does not set up any
|
||
interfaces on the host, or changes routing, slirp does not require
|
||
root access or setuid binaries on the host.
|
||
|
||
|
||
The general format of the command line switch for slirp is:
|
||
|
||
|
||
|
||
ethn=slirp,ethernet address,slirp path
|
||
|
||
|
||
|
||
|
||
The ethernet address is optional, as UML will set up the interface
|
||
with an ethernet address based upon the initial IP address of the
|
||
interface. The slirp path is generally /usr/bin/slirp, although it
|
||
will depend on distribution.
|
||
|
||
|
||
The slirp program can have a number of options passed to the command
|
||
line and we can't add them to the UML command line, as they will be
|
||
parsed incorrectly. Instead, a wrapper shell script can be written or
|
||
the options inserted into the /.slirprc file. More information on
|
||
all of the slirp options can be found in its man pages.
|
||
|
||
|
||
The eth0 interface on UML should be set up with the IP 10.2.0.15,
|
||
although you can use anything as long as it is not used by a network
|
||
you will be connecting to. The default route on UML should be set to
|
||
use
|
||
|
||
|
||
UML#
|
||
route add default dev eth0
|
||
|
||
|
||
|
||
|
||
slirp provides a number of useful IP addresses which can be used by
|
||
UML, such as 10.0.2.3 which is an alias for the DNS server specified
|
||
in /etc/resolv.conf on the host or the IP given in the 'dns' option
|
||
for slirp.
|
||
|
||
|
||
Even with a baudrate setting higher than 115200, the slirp connection
|
||
is limited to 115200. If you need it to go faster, the slirp binary
|
||
needs to be compiled with FULL_BOLT defined in config.h.
|
||
|
||
|
||
|
||
66..1122.. ppccaapp
|
||
|
||
The pcap transport is attached to a UML ethernet device on the command
|
||
line or with uml_mconsole with the following syntax:
|
||
|
||
|
||
|
||
ethn=pcap,host interface,filter
|
||
expression,option1,option2
|
||
|
||
|
||
|
||
|
||
The expression and options are optional.
|
||
|
||
|
||
The interface is whatever network device on the host you want to
|
||
sniff. The expression is a pcap filter expression, which is also what
|
||
tcpdump uses, so if you know how to specify tcpdump filters, you will
|
||
use the same expressions here. The options are up to two of
|
||
'promisc', control whether pcap puts the host interface into
|
||
promiscuous mode. 'optimize' and 'nooptimize' control whether the pcap
|
||
expression optimizer is used.
|
||
|
||
|
||
Example:
|
||
|
||
|
||
|
||
eth0=pcap,eth0,tcp
|
||
|
||
eth1=pcap,eth0,!tcp
|
||
|
||
|
||
|
||
will cause the UML eth0 to emit all tcp packets on the host eth0 and
|
||
the UML eth1 to emit all non-tcp packets on the host eth0.
|
||
|
||
|
||
|
||
66..1133.. SSeettttiinngg uupp tthhee hhoosstt yyoouurrsseellff
|
||
|
||
If you don't specify an address for the host side of the ethertap or
|
||
slip device, UML won't do any setup on the host. So this is what is
|
||
needed to get things working (the examples use a host-side IP of
|
||
192.168.0.251 and a UML-side IP of 192.168.0.250 - adjust to suit your
|
||
own network):
|
||
|
||
+o The device needs to be configured with its IP address. Tap devices
|
||
are also configured with an mtu of 1484. Slip devices are
|
||
configured with a point-to-point address pointing at the UML ip
|
||
address.
|
||
|
||
|
||
host# ifconfig tap0 arp mtu 1484 192.168.0.251 up
|
||
|
||
|
||
|
||
|
||
|
||
|
||
host#
|
||
ifconfig sl0 192.168.0.251 pointopoint 192.168.0.250 up
|
||
|
||
|
||
|
||
|
||
|
||
+o If a tap device is being set up, a route is set to the UML IP.
|
||
|
||
|
||
UML# route add -host 192.168.0.250 gw 192.168.0.251
|
||
|
||
|
||
|
||
|
||
|
||
+o To allow other hosts on your network to see the virtual machine,
|
||
proxy arp is set up for it.
|
||
|
||
|
||
host# arp -Ds 192.168.0.250 eth0 pub
|
||
|
||
|
||
|
||
|
||
|
||
+o Finally, the host is set up to route packets.
|
||
|
||
|
||
host# echo 1 > /proc/sys/net/ipv4/ip_forward
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
77.. SShhaarriinngg FFiilleessyysstteemmss bbeettwweeeenn VViirrttuuaall MMaacchhiinneess
|
||
|
||
|
||
|
||
|
||
77..11.. AA wwaarrnniinngg
|
||
|
||
Don't attempt to share filesystems simply by booting two UMLs from the
|
||
same file. That's the same thing as booting two physical machines
|
||
from a shared disk. It will result in filesystem corruption.
|
||
|
||
|
||
|
||
77..22.. UUssiinngg llaayyeerreedd bblloocckk ddeevviicceess
|
||
|
||
The way to share a filesystem between two virtual machines is to use
|
||
the copy-on-write (COW) layering capability of the ubd block driver.
|
||
As of 2.4.6-2um, the driver supports layering a read-write private
|
||
device over a read-only shared device. A machine's writes are stored
|
||
in the private device, while reads come from either device - the
|
||
private one if the requested block is valid in it, the shared one if
|
||
not. Using this scheme, the majority of data which is unchanged is
|
||
shared between an arbitrary number of virtual machines, each of which
|
||
has a much smaller file containing the changes that it has made. With
|
||
a large number of UMLs booting from a large root filesystem, this
|
||
leads to a huge disk space saving. It will also help performance,
|
||
since the host will be able to cache the shared data using a much
|
||
smaller amount of memory, so UML disk requests will be served from the
|
||
host's memory rather than its disks.
|
||
|
||
|
||
|
||
|
||
To add a copy-on-write layer to an existing block device file, simply
|
||
add the name of the COW file to the appropriate ubd switch:
|
||
|
||
|
||
ubd0=root_fs_cow,root_fs_debian_22
|
||
|
||
|
||
|
||
|
||
where 'root_fs_cow' is the private COW file and 'root_fs_debian_22' is
|
||
the existing shared filesystem. The COW file need not exist. If it
|
||
doesn't, the driver will create and initialize it. Once the COW file
|
||
has been initialized, it can be used on its own on the command line:
|
||
|
||
|
||
ubd0=root_fs_cow
|
||
|
||
|
||
|
||
|
||
The name of the backing file is stored in the COW file header, so it
|
||
would be redundant to continue specifying it on the command line.
|
||
|
||
|
||
|
||
77..33.. NNoottee!!
|
||
|
||
When checking the size of the COW file in order to see the gobs of
|
||
space that you're saving, make sure you use 'ls -ls' to see the actual
|
||
disk consumption rather than the length of the file. The COW file is
|
||
sparse, so the length will be very different from the disk usage.
|
||
Here is a 'ls -l' of a COW file and backing file from one boot and
|
||
shutdown:
|
||
host% ls -l cow.debian debian2.2
|
||
-rw-r--r-- 1 jdike jdike 492504064 Aug 6 21:16 cow.debian
|
||
-rwxrw-rw- 1 jdike jdike 537919488 Aug 6 20:42 debian2.2
|
||
|
||
|
||
|
||
|
||
Doesn't look like much saved space, does it? Well, here's 'ls -ls':
|
||
|
||
|
||
host% ls -ls cow.debian debian2.2
|
||
880 -rw-r--r-- 1 jdike jdike 492504064 Aug 6 21:16 cow.debian
|
||
525832 -rwxrw-rw- 1 jdike jdike 537919488 Aug 6 20:42 debian2.2
|
||
|
||
|
||
|
||
|
||
Now, you can see that the COW file has less than a meg of disk, rather
|
||
than 492 meg.
|
||
|
||
|
||
|
||
77..44.. AAnnootthheerr wwaarrnniinngg
|
||
|
||
Once a filesystem is being used as a readonly backing file for a COW
|
||
file, do not boot directly from it or modify it in any way. Doing so
|
||
will invalidate any COW files that are using it. The mtime and size
|
||
of the backing file are stored in the COW file header at its creation,
|
||
and they must continue to match. If they don't, the driver will
|
||
refuse to use the COW file.
|
||
|
||
|
||
|
||
|
||
If you attempt to evade this restriction by changing either the
|
||
backing file or the COW header by hand, you will get a corrupted
|
||
filesystem.
|
||
|
||
|
||
|
||
|
||
Among other things, this means that upgrading the distribution in a
|
||
backing file and expecting that all of the COW files using it will see
|
||
the upgrade will not work.
|
||
|
||
|
||
|
||
|
||
77..55.. uummll__mmoooo :: MMeerrggiinngg aa CCOOWW ffiillee wwiitthh iittss bbaacckkiinngg ffiillee
|
||
|
||
Depending on how you use UML and COW devices, it may be advisable to
|
||
merge the changes in the COW file into the backing file every once in
|
||
a while.
|
||
|
||
|
||
|
||
|
||
The utility that does this is uml_moo. Its usage is
|
||
|
||
|
||
host% uml_moo COW file new backing file
|
||
|
||
|
||
|
||
|
||
There's no need to specify the backing file since that information is
|
||
already in the COW file header. If you're paranoid, boot the new
|
||
merged file, and if you're happy with it, move it over the old backing
|
||
file.
|
||
|
||
|
||
|
||
|
||
uml_moo creates a new backing file by default as a safety measure. It
|
||
also has a destructive merge option which will merge the COW file
|
||
directly into its current backing file. This is really only usable
|
||
when the backing file only has one COW file associated with it. If
|
||
there are multiple COWs associated with a backing file, a -d merge of
|
||
one of them will invalidate all of the others. However, it is
|
||
convenient if you're short of disk space, and it should also be
|
||
noticably faster than a non-destructive merge.
|
||
|
||
|
||
|
||
|
||
uml_moo is installed with the UML deb and RPM. If you didn't install
|
||
UML from one of those packages, you can also get it from the UML
|
||
utilities <http://user-mode-linux.sourceforge.net/dl-sf.html#UML
|
||
utilities> tar file in tools/moo.
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
88.. CCrreeaattiinngg ffiilleessyysstteemmss
|
||
|
||
|
||
You may want to create and mount new UML filesystems, either because
|
||
your root filesystem isn't large enough or because you want to use a
|
||
filesystem other than ext2.
|
||
|
||
|
||
This was written on the occasion of reiserfs being included in the
|
||
2.4.1 kernel pool, and therefore the 2.4.1 UML, so the examples will
|
||
talk about reiserfs. This information is generic, and the examples
|
||
should be easy to translate to the filesystem of your choice.
|
||
|
||
|
||
88..11.. CCrreeaattee tthhee ffiilleessyysstteemm ffiillee
|
||
|
||
dd is your friend. All you need to do is tell dd to create an empty
|
||
file of the appropriate size. I usually make it sparse to save time
|
||
and to avoid allocating disk space until it's actually used. For
|
||
example, the following command will create a sparse 100 meg file full
|
||
of zeroes.
|
||
|
||
|
||
host%
|
||
dd if=/dev/zero of=new_filesystem seek=100 count=1 bs=1M
|
||
|
||
|
||
|
||
|
||
|
||
|
||
88..22.. AAssssiiggnn tthhee ffiillee ttoo aa UUMMLL ddeevviiccee
|
||
|
||
Add an argument like the following to the UML command line:
|
||
|
||
ubd4=new_filesystem
|
||
|
||
|
||
|
||
|
||
making sure that you use an unassigned ubd device number.
|
||
|
||
|
||
|
||
88..33.. CCrreeaattiinngg aanndd mmoouunnttiinngg tthhee ffiilleessyysstteemm
|
||
|
||
Make sure that the filesystem is available, either by being built into
|
||
the kernel, or available as a module, then boot up UML and log in. If
|
||
the root filesystem doesn't have the filesystem utilities (mkfs, fsck,
|
||
etc), then get them into UML by way of the net or hostfs.
|
||
|
||
|
||
Make the new filesystem on the device assigned to the new file:
|
||
|
||
|
||
host# mkreiserfs /dev/ubd/4
|
||
|
||
|
||
<----------- MKREISERFSv2 ----------->
|
||
|
||
ReiserFS version 3.6.25
|
||
Block size 4096 bytes
|
||
Block count 25856
|
||
Used blocks 8212
|
||
Journal - 8192 blocks (18-8209), journal header is in block 8210
|
||
Bitmaps: 17
|
||
Root block 8211
|
||
Hash function "r5"
|
||
ATTENTION: ALL DATA WILL BE LOST ON '/dev/ubd/4'! (y/n)y
|
||
journal size 8192 (from 18)
|
||
Initializing journal - 0%....20%....40%....60%....80%....100%
|
||
Syncing..done.
|
||
|
||
|
||
|
||
|
||
Now, mount it:
|
||
|
||
|
||
UML#
|
||
mount /dev/ubd/4 /mnt
|
||
|
||
|
||
|
||
|
||
and you're in business.
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
99.. HHoosstt ffiillee aacccceessss
|
||
|
||
|
||
If you want to access files on the host machine from inside UML, you
|
||
can treat it as a separate machine and either nfs mount directories
|
||
from the host or copy files into the virtual machine with scp or rcp.
|
||
However, since UML is running on the host, it can access those
|
||
files just like any other process and make them available inside the
|
||
virtual machine without needing to use the network.
|
||
|
||
|
||
This is now possible with the hostfs virtual filesystem. With it, you
|
||
can mount a host directory into the UML filesystem and access the
|
||
files contained in it just as you would on the host.
|
||
|
||
|
||
99..11.. UUssiinngg hhoossttffss
|
||
|
||
To begin with, make sure that hostfs is available inside the virtual
|
||
machine with
|
||
|
||
|
||
UML# cat /proc/filesystems
|
||
|
||
|
||
|
||
. hostfs should be listed. If it's not, either rebuild the kernel
|
||
with hostfs configured into it or make sure that hostfs is built as a
|
||
module and available inside the virtual machine, and insmod it.
|
||
|
||
|
||
Now all you need to do is run mount:
|
||
|
||
|
||
UML# mount none /mnt/host -t hostfs
|
||
|
||
|
||
|
||
|
||
will mount the host's / on the virtual machine's /mnt/host.
|
||
|
||
|
||
If you don't want to mount the host root directory, then you can
|
||
specify a subdirectory to mount with the -o switch to mount:
|
||
|
||
|
||
UML# mount none /mnt/home -t hostfs -o /home
|
||
|
||
|
||
|
||
|
||
will mount the hosts's /home on the virtual machine's /mnt/home.
|
||
|
||
|
||
|
||
99..22.. hhoossttffss aass tthhee rroooott ffiilleessyysstteemm
|
||
|
||
It's possible to boot from a directory hierarchy on the host using
|
||
hostfs rather than using the standard filesystem in a file.
|
||
|
||
To start, you need that hierarchy. The easiest way is to loop mount
|
||
an existing root_fs file:
|
||
|
||
|
||
host# mount root_fs uml_root_dir -o loop
|
||
|
||
|
||
|
||
|
||
You need to change the filesystem type of / in etc/fstab to be
|
||
'hostfs', so that line looks like this:
|
||
|
||
/dev/ubd/0 / hostfs defaults 1 1
|
||
|
||
|
||
|
||
|
||
Then you need to chown to yourself all the files in that directory
|
||
that are owned by root. This worked for me:
|
||
|
||
|
||
host# find . -uid 0 -exec chown jdike {} \;
|
||
|
||
|
||
|
||
|
||
Next, make sure that your UML kernel has hostfs compiled in, not as a
|
||
module. Then run UML with the boot device pointing at that directory:
|
||
|
||
|
||
ubd0=/path/to/uml/root/directory
|
||
|
||
|
||
|
||
|
||
UML should then boot as it does normally.
|
||
|
||
|
||
99..33.. BBuuiillddiinngg hhoossttffss
|
||
|
||
If you need to build hostfs because it's not in your kernel, you have
|
||
two choices:
|
||
|
||
|
||
|
||
+o Compiling hostfs into the kernel:
|
||
|
||
|
||
Reconfigure the kernel and set the 'Host filesystem' option under
|
||
|
||
|
||
+o Compiling hostfs as a module:
|
||
|
||
|
||
Reconfigure the kernel and set the 'Host filesystem' option under
|
||
be in arch/um/fs/hostfs/hostfs.o. Install that in
|
||
/lib/modules/`uname -r`/fs in the virtual machine, boot it up, and
|
||
|
||
|
||
UML# insmod hostfs
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
1100.. TThhee MMaannaaggeemmeenntt CCoonnssoollee
|
||
|
||
|
||
|
||
The UML management console is a low-level interface to the kernel,
|
||
somewhat like the i386 SysRq interface. Since there is a full-blown
|
||
operating system under UML, there is much greater flexibility possible
|
||
than with the SysRq mechanism.
|
||
|
||
|
||
There are a number of things you can do with the mconsole interface:
|
||
|
||
+o get the kernel version
|
||
|
||
+o add and remove devices
|
||
|
||
+o halt or reboot the machine
|
||
|
||
+o Send SysRq commands
|
||
|
||
+o Pause and resume the UML
|
||
|
||
|
||
You need the mconsole client (uml_mconsole) which is present in CVS
|
||
(/tools/mconsole) in 2.4.5-9um and later, and will be in the RPM in
|
||
2.4.6.
|
||
|
||
|
||
You also need CONFIG_MCONSOLE (under 'General Setup') enabled in UML.
|
||
When you boot UML, you'll see a line like:
|
||
|
||
|
||
mconsole initialized on /home/jdike/.uml/umlNJ32yL/mconsole
|
||
|
||
|
||
|
||
|
||
If you specify a unique machine id one the UML command line, i.e.
|
||
|
||
|
||
umid=debian
|
||
|
||
|
||
|
||
|
||
you'll see this
|
||
|
||
|
||
mconsole initialized on /home/jdike/.uml/debian/mconsole
|
||
|
||
|
||
|
||
|
||
That file is the socket that uml_mconsole will use to communicate with
|
||
UML. Run it with either the umid or the full path as its argument:
|
||
|
||
|
||
host% uml_mconsole debian
|
||
|
||
|
||
|
||
|
||
or
|
||
|
||
|
||
host% uml_mconsole /home/jdike/.uml/debian/mconsole
|
||
|
||
|
||
|
||
|
||
You'll get a prompt, at which you can run one of these commands:
|
||
|
||
+o version
|
||
|
||
+o halt
|
||
|
||
+o reboot
|
||
|
||
+o config
|
||
|
||
+o remove
|
||
|
||
+o sysrq
|
||
|
||
+o help
|
||
|
||
+o cad
|
||
|
||
+o stop
|
||
|
||
+o go
|
||
|
||
|
||
1100..11.. vveerrssiioonn
|
||
|
||
This takes no arguments. It prints the UML version.
|
||
|
||
|
||
(mconsole) version
|
||
OK Linux usermode 2.4.5-9um #1 Wed Jun 20 22:47:08 EDT 2001 i686
|
||
|
||
|
||
|
||
|
||
There are a couple actual uses for this. It's a simple no-op which
|
||
can be used to check that a UML is running. It's also a way of
|
||
sending an interrupt to the UML. This is sometimes useful on SMP
|
||
hosts, where there's a bug which causes signals to UML to be lost,
|
||
often causing it to appear to hang. Sending such a UML the mconsole
|
||
version command is a good way to 'wake it up' before networking has
|
||
been enabled, as it does not do anything to the function of the UML.
|
||
|
||
|
||
|
||
1100..22.. hhaalltt aanndd rreebboooott
|
||
|
||
These take no arguments. They shut the machine down immediately, with
|
||
no syncing of disks and no clean shutdown of userspace. So, they are
|
||
pretty close to crashing the machine.
|
||
|
||
|
||
(mconsole) halt
|
||
OK
|
||
|
||
|
||
|
||
|
||
|
||
|
||
1100..33.. ccoonnffiigg
|
||
|
||
"config" adds a new device to the virtual machine. Currently the ubd
|
||
and network drivers support this. It takes one argument, which is the
|
||
device to add, with the same syntax as the kernel command line.
|
||
|
||
|
||
|
||
|
||
(mconsole)
|
||
config ubd3=/home/jdike/incoming/roots/root_fs_debian22
|
||
|
||
OK
|
||
(mconsole) config eth1=mcast
|
||
OK
|
||
|
||
|
||
|
||
|
||
|
||
|
||
1100..44.. rreemmoovvee
|
||
|
||
"remove" deletes a device from the system. Its argument is just the
|
||
name of the device to be removed. The device must be idle in whatever
|
||
sense the driver considers necessary. In the case of the ubd driver,
|
||
the removed block device must not be mounted, swapped on, or otherwise
|
||
open, and in the case of the network driver, the device must be down.
|
||
|
||
|
||
(mconsole) remove ubd3
|
||
OK
|
||
(mconsole) remove eth1
|
||
OK
|
||
|
||
|
||
|
||
|
||
|
||
|
||
1100..55.. ssyyssrrqq
|
||
|
||
This takes one argument, which is a single letter. It calls the
|
||
generic kernel's SysRq driver, which does whatever is called for by
|
||
that argument. See the SysRq documentation in Documentation/sysrq.txt
|
||
in your favorite kernel tree to see what letters are valid and what
|
||
they do.
|
||
|
||
|
||
|
||
1100..66.. hheellpp
|
||
|
||
"help" returns a string listing the valid commands and what each one
|
||
does.
|
||
|
||
|
||
|
||
1100..77.. ccaadd
|
||
|
||
This invokes the Ctl-Alt-Del action on init. What exactly this ends
|
||
up doing is up to /etc/inittab. Normally, it reboots the machine.
|
||
With UML, this is usually not desired, so if a halt would be better,
|
||
then find the section of inittab that looks like this
|
||
|
||
|
||
# What to do when CTRL-ALT-DEL is pressed.
|
||
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
|
||
|
||
|
||
|
||
|
||
and change the command to halt.
|
||
|
||
|
||
|
||
1100..88.. ssttoopp
|
||
|
||
This puts the UML in a loop reading mconsole requests until a 'go'
|
||
mconsole command is received. This is very useful for making backups
|
||
of UML filesystems, as the UML can be stopped, then synced via 'sysrq
|
||
s', so that everything is written to the filesystem. You can then copy
|
||
the filesystem and then send the UML 'go' via mconsole.
|
||
|
||
|
||
Note that a UML running with more than one CPU will have problems
|
||
after you send the 'stop' command, as only one CPU will be held in a
|
||
mconsole loop and all others will continue as normal. This is a bug,
|
||
and will be fixed.
|
||
|
||
|
||
|
||
1100..99.. ggoo
|
||
|
||
This resumes a UML after being paused by a 'stop' command. Note that
|
||
when the UML has resumed, TCP connections may have timed out and if
|
||
the UML is paused for a long period of time, crond might go a little
|
||
crazy, running all the jobs it didn't do earlier.
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
1111.. KKeerrnneell ddeebbuuggggiinngg
|
||
|
||
|
||
NNoottee:: The interface that makes debugging, as described here, possible
|
||
is present in 2.4.0-test6 kernels and later.
|
||
|
||
|
||
Since the user-mode kernel runs as a normal Linux process, it is
|
||
possible to debug it with gdb almost like any other process. It is
|
||
slightly different because the kernel's threads are already being
|
||
ptraced for system call interception, so gdb can't ptrace them.
|
||
However, a mechanism has been added to work around that problem.
|
||
|
||
|
||
In order to debug the kernel, you need build it from source. See
|
||
``Compiling the kernel and modules'' for information on doing that.
|
||
Make sure that you enable CONFIG_DEBUGSYM and CONFIG_PT_PROXY during
|
||
the config. These will compile the kernel with -g, and enable the
|
||
ptrace proxy so that gdb works with UML, respectively.
|
||
|
||
|
||
|
||
|
||
1111..11.. SSttaarrttiinngg tthhee kkeerrnneell uunnddeerr ggddbb
|
||
|
||
You can have the kernel running under the control of gdb from the
|
||
beginning by putting 'debug' on the command line. You will get an
|
||
xterm with gdb running inside it. The kernel will send some commands
|
||
to gdb which will leave it stopped at the beginning of start_kernel.
|
||
At this point, you can get things going with 'next', 'step', or
|
||
'cont'.
|
||
|
||
|
||
There is a transcript of a debugging session here <debug-
|
||
session.html> , with breakpoints being set in the scheduler and in an
|
||
interrupt handler.
|
||
1111..22.. EExxaammiinniinngg sslleeeeppiinngg pprroocceesssseess
|
||
|
||
Not every bug is evident in the currently running process. Sometimes,
|
||
processes hang in the kernel when they shouldn't because they've
|
||
deadlocked on a semaphore or something similar. In this case, when
|
||
you ^C gdb and get a backtrace, you will see the idle thread, which
|
||
isn't very relevant.
|
||
|
||
|
||
What you want is the stack of whatever process is sleeping when it
|
||
shouldn't be. You need to figure out which process that is, which is
|
||
generally fairly easy. Then you need to get its host process id,
|
||
which you can do either by looking at ps on the host or at
|
||
task.thread.extern_pid in gdb.
|
||
|
||
|
||
Now what you do is this:
|
||
|
||
+o detach from the current thread
|
||
|
||
|
||
(UML gdb) det
|
||
|
||
|
||
|
||
|
||
|
||
+o attach to the thread you are interested in
|
||
|
||
|
||
(UML gdb) att <host pid>
|
||
|
||
|
||
|
||
|
||
|
||
+o look at its stack and anything else of interest
|
||
|
||
|
||
(UML gdb) bt
|
||
|
||
|
||
|
||
|
||
Note that you can't do anything at this point that requires that a
|
||
process execute, e.g. calling a function
|
||
|
||
+o when you're done looking at that process, reattach to the current
|
||
thread and continue it
|
||
|
||
|
||
(UML gdb)
|
||
att 1
|
||
|
||
|
||
|
||
|
||
|
||
|
||
(UML gdb)
|
||
c
|
||
|
||
|
||
|
||
|
||
Here, specifying any pid which is not the process id of a UML thread
|
||
will cause gdb to reattach to the current thread. I commonly use 1,
|
||
but any other invalid pid would work.
|
||
|
||
|
||
|
||
1111..33.. RRuunnnniinngg dddddd oonn UUMMLL
|
||
|
||
ddd works on UML, but requires a special kludge. The process goes
|
||
like this:
|
||
|
||
+o Start ddd
|
||
|
||
|
||
host% ddd linux
|
||
|
||
|
||
|
||
|
||
|
||
+o With ps, get the pid of the gdb that ddd started. You can ask the
|
||
gdb to tell you, but for some reason that confuses things and
|
||
causes a hang.
|
||
|
||
+o run UML with 'debug=parent gdb-pid=<pid>' added to the command line
|
||
- it will just sit there after you hit return
|
||
|
||
+o type 'att 1' to the ddd gdb and you will see something like
|
||
|
||
|
||
0xa013dc51 in __kill ()
|
||
|
||
|
||
(gdb)
|
||
|
||
|
||
|
||
|
||
|
||
+o At this point, type 'c', UML will boot up, and you can use ddd just
|
||
as you do on any other process.
|
||
|
||
|
||
|
||
1111..44.. DDeebbuuggggiinngg mmoodduulleess
|
||
|
||
gdb has support for debugging code which is dynamically loaded into
|
||
the process. This support is what is needed to debug kernel modules
|
||
under UML.
|
||
|
||
|
||
Using that support is somewhat complicated. You have to tell gdb what
|
||
object file you just loaded into UML and where in memory it is. Then,
|
||
it can read the symbol table, and figure out where all the symbols are
|
||
from the load address that you provided. It gets more interesting
|
||
when you load the module again (i.e. after an rmmod). You have to
|
||
tell gdb to forget about all its symbols, including the main UML ones
|
||
for some reason, then load then all back in again.
|
||
|
||
|
||
There's an easy way and a hard way to do this. The easy way is to use
|
||
the umlgdb expect script written by Chandan Kudige. It basically
|
||
automates the process for you.
|
||
|
||
|
||
First, you must tell it where your modules are. There is a list in
|
||
the script that looks like this:
|
||
set MODULE_PATHS {
|
||
"fat" "/usr/src/uml/linux-2.4.18/fs/fat/fat.o"
|
||
"isofs" "/usr/src/uml/linux-2.4.18/fs/isofs/isofs.o"
|
||
"minix" "/usr/src/uml/linux-2.4.18/fs/minix/minix.o"
|
||
}
|
||
|
||
|
||
|
||
|
||
You change that to list the names and paths of the modules that you
|
||
are going to debug. Then you run it from the toplevel directory of
|
||
your UML pool and it basically tells you what to do:
|
||
|
||
|
||
|
||
|
||
******** GDB pid is 21903 ********
|
||
Start UML as: ./linux <kernel switches> debug gdb-pid=21903
|
||
|
||
|
||
|
||
GNU gdb 5.0rh-5 Red Hat Linux 7.1
|
||
Copyright 2001 Free Software Foundation, Inc.
|
||
GDB is free software, covered by the GNU General Public License, and you are
|
||
welcome to change it and/or distribute copies of it under certain conditions.
|
||
Type "show copying" to see the conditions.
|
||
There is absolutely no warranty for GDB. Type "show warranty" for details.
|
||
This GDB was configured as "i386-redhat-linux"...
|
||
(gdb) b sys_init_module
|
||
Breakpoint 1 at 0xa0011923: file module.c, line 349.
|
||
(gdb) att 1
|
||
|
||
|
||
|
||
|
||
After you run UML and it sits there doing nothing, you hit return at
|
||
the 'att 1' and continue it:
|
||
|
||
|
||
Attaching to program: /home/jdike/linux/2.4/um/./linux, process 1
|
||
0xa00f4221 in __kill ()
|
||
(UML gdb) c
|
||
Continuing.
|
||
|
||
|
||
|
||
|
||
At this point, you debug normally. When you insmod something, the
|
||
expect magic will kick in and you'll see something like:
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
*** Module hostfs loaded ***
|
||
Breakpoint 1, sys_init_module (name_user=0x805abb0 "hostfs",
|
||
mod_user=0x8070e00) at module.c:349
|
||
349 char *name, *n_name, *name_tmp = NULL;
|
||
(UML gdb) finish
|
||
Run till exit from #0 sys_init_module (name_user=0x805abb0 "hostfs",
|
||
mod_user=0x8070e00) at module.c:349
|
||
0xa00e2e23 in execute_syscall (r=0xa8140284) at syscall_kern.c:411
|
||
411 else res = EXECUTE_SYSCALL(syscall, regs);
|
||
Value returned is $1 = 0
|
||
(UML gdb)
|
||
p/x (int)module_list + module_list->size_of_struct
|
||
|
||
$2 = 0xa9021054
|
||
(UML gdb) symbol-file ./linux
|
||
Load new symbol table from "./linux"? (y or n) y
|
||
Reading symbols from ./linux...
|
||
done.
|
||
(UML gdb)
|
||
add-symbol-file /home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o 0xa9021054
|
||
|
||
add symbol table from file "/home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o" at
|
||
.text_addr = 0xa9021054
|
||
(y or n) y
|
||
|
||
Reading symbols from /home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o...
|
||
done.
|
||
(UML gdb) p *module_list
|
||
$1 = {size_of_struct = 84, next = 0xa0178720, name = 0xa9022de0 "hostfs",
|
||
size = 9016, uc = {usecount = {counter = 0}, pad = 0}, flags = 1,
|
||
nsyms = 57, ndeps = 0, syms = 0xa9023170, deps = 0x0, refs = 0x0,
|
||
init = 0xa90221f0 <init_hostfs>, cleanup = 0xa902222c <exit_hostfs>,
|
||
ex_table_start = 0x0, ex_table_end = 0x0, persist_start = 0x0,
|
||
persist_end = 0x0, can_unload = 0, runsize = 0, kallsyms_start = 0x0,
|
||
kallsyms_end = 0x0,
|
||
archdata_start = 0x1b855 <Address 0x1b855 out of bounds>,
|
||
archdata_end = 0xe5890000 <Address 0xe5890000 out of bounds>,
|
||
kernel_data = 0xf689c35d <Address 0xf689c35d out of bounds>}
|
||
>> Finished loading symbols for hostfs ...
|
||
|
||
|
||
|
||
|
||
That's the easy way. It's highly recommended. The hard way is
|
||
described below in case you're interested in what's going on.
|
||
|
||
|
||
Boot the kernel under the debugger and load the module with insmod or
|
||
modprobe. With gdb, do:
|
||
|
||
|
||
(UML gdb) p module_list
|
||
|
||
|
||
|
||
|
||
This is a list of modules that have been loaded into the kernel, with
|
||
the most recently loaded module first. Normally, the module you want
|
||
is at module_list. If it's not, walk down the next links, looking at
|
||
the name fields until find the module you want to debug. Take the
|
||
address of that structure, and add module.size_of_struct (which in
|
||
2.4.10 kernels is 96 (0x60)) to it. Gdb can make this hard addition
|
||
for you :-):
|
||
|
||
|
||
|
||
(UML gdb)
|
||
printf "%#x\n", (int)module_list module_list->size_of_struct
|
||
|
||
|
||
|
||
|
||
The offset from the module start occasionally changes (before 2.4.0,
|
||
it was module.size_of_struct + 4), so it's a good idea to check the
|
||
init and cleanup addresses once in a while, as describe below. Now
|
||
do:
|
||
|
||
|
||
(UML gdb)
|
||
add-symbol-file /path/to/module/on/host that_address
|
||
|
||
|
||
|
||
|
||
Tell gdb you really want to do it, and you're in business.
|
||
|
||
|
||
If there's any doubt that you got the offset right, like breakpoints
|
||
appear not to work, or they're appearing in the wrong place, you can
|
||
check it by looking at the module structure. The init and cleanup
|
||
fields should look like:
|
||
|
||
|
||
init = 0x588066b0 <init_hostfs>, cleanup = 0x588066c0 <exit_hostfs>
|
||
|
||
|
||
|
||
|
||
with no offsets on the symbol names. If the names are right, but they
|
||
are offset, then the offset tells you how much you need to add to the
|
||
address you gave to add-symbol-file.
|
||
|
||
|
||
When you want to load in a new version of the module, you need to get
|
||
gdb to forget about the old one. The only way I've found to do that
|
||
is to tell gdb to forget about all symbols that it knows about:
|
||
|
||
|
||
(UML gdb) symbol-file
|
||
|
||
|
||
|
||
|
||
Then reload the symbols from the kernel binary:
|
||
|
||
|
||
(UML gdb) symbol-file /path/to/kernel
|
||
|
||
|
||
|
||
|
||
and repeat the process above. You'll also need to re-enable break-
|
||
points. They were disabled when you dumped all the symbols because
|
||
gdb couldn't figure out where they should go.
|
||
|
||
|
||
|
||
1111..55.. AAttttaacchhiinngg ggddbb ttoo tthhee kkeerrnneell
|
||
|
||
If you don't have the kernel running under gdb, you can attach gdb to
|
||
it later by sending the tracing thread a SIGUSR1. The first line of
|
||
the console output identifies its pid:
|
||
tracing thread pid = 20093
|
||
|
||
|
||
|
||
|
||
When you send it the signal:
|
||
|
||
|
||
host% kill -USR1 20093
|
||
|
||
|
||
|
||
|
||
you will get an xterm with gdb running in it.
|
||
|
||
|
||
If you have the mconsole compiled into UML, then the mconsole client
|
||
can be used to start gdb:
|
||
|
||
|
||
(mconsole) (mconsole) config gdb=xterm
|
||
|
||
|
||
|
||
|
||
will fire up an xterm with gdb running in it.
|
||
|
||
|
||
|
||
1111..66.. UUssiinngg aalltteerrnnaattee ddeebbuuggggeerrss
|
||
|
||
UML has support for attaching to an already running debugger rather
|
||
than starting gdb itself. This is present in CVS as of 17 Apr 2001.
|
||
I sent it to Alan for inclusion in the ac tree, and it will be in my
|
||
2.4.4 release.
|
||
|
||
|
||
This is useful when gdb is a subprocess of some UI, such as emacs or
|
||
ddd. It can also be used to run debuggers other than gdb on UML.
|
||
Below is an example of using strace as an alternate debugger.
|
||
|
||
|
||
To do this, you need to get the pid of the debugger and pass it in
|
||
with the
|
||
|
||
|
||
If you are using gdb under some UI, then tell it to 'att 1', and
|
||
you'll find yourself attached to UML.
|
||
|
||
|
||
If you are using something other than gdb as your debugger, then
|
||
you'll need to get it to do the equivalent of 'att 1' if it doesn't do
|
||
it automatically.
|
||
|
||
|
||
An example of an alternate debugger is strace. You can strace the
|
||
actual kernel as follows:
|
||
|
||
+o Run the following in a shell
|
||
|
||
|
||
host%
|
||
sh -c 'echo pid=$$; echo -n hit return; read x; exec strace -p 1 -o strace.out'
|
||
|
||
|
||
|
||
+o Run UML with 'debug' and 'gdb-pid=<pid>' with the pid printed out
|
||
by the previous command
|
||
|
||
+o Hit return in the shell, and UML will start running, and strace
|
||
output will start accumulating in the output file.
|
||
|
||
Note that this is different from running
|
||
|
||
|
||
host% strace ./linux
|
||
|
||
|
||
|
||
|
||
That will strace only the main UML thread, the tracing thread, which
|
||
doesn't do any of the actual kernel work. It just oversees the vir-
|
||
tual machine. In contrast, using strace as described above will show
|
||
you the low-level activity of the virtual machine.
|
||
|
||
|
||
|
||
|
||
|
||
1122.. KKeerrnneell ddeebbuuggggiinngg eexxaammpplleess
|
||
|
||
1122..11.. TThhee ccaassee ooff tthhee hhuunngg ffsscckk
|
||
|
||
When booting up the kernel, fsck failed, and dropped me into a shell
|
||
to fix things up. I ran fsck -y, which hung:
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
Setting hostname uml [ OK ]
|
||
Checking root filesystem
|
||
/dev/fhd0 was not cleanly unmounted, check forced.
|
||
Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780.
|
||
|
||
/dev/fhd0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
|
||
(i.e., without -a or -p options)
|
||
[ FAILED ]
|
||
|
||
*** An error occurred during the file system check.
|
||
*** Dropping you to a shell; the system will reboot
|
||
*** when you leave the shell.
|
||
Give root password for maintenance
|
||
(or type Control-D for normal startup):
|
||
|
||
[root@uml /root]# fsck -y /dev/fhd0
|
||
fsck -y /dev/fhd0
|
||
Parallelizing fsck version 1.14 (9-Jan-1999)
|
||
e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09
|
||
/dev/fhd0 contains a file system with errors, check forced.
|
||
Pass 1: Checking inodes, blocks, and sizes
|
||
Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. Ignore error? yes
|
||
|
||
Inode 19780, i_blocks is 1548, should be 540. Fix? yes
|
||
|
||
Pass 2: Checking directory structure
|
||
Error reading block 49405 (Attempt to read block from filesystem resulted in short read). Ignore error? yes
|
||
|
||
Directory inode 11858, block 0, offset 0: directory corrupted
|
||
Salvage? yes
|
||
|
||
Missing '.' in directory inode 11858.
|
||
Fix? yes
|
||
|
||
Missing '..' in directory inode 11858.
|
||
Fix? yes
|
||
|
||
|
||
|
||
|
||
|
||
The standard drill in this sort of situation is to fire up gdb on the
|
||
signal thread, which, in this case, was pid 1935. In another window,
|
||
I run gdb and attach pid 1935.
|
||
|
||
|
||
|
||
|
||
~/linux/2.3.26/um 1016: gdb linux
|
||
GNU gdb 4.17.0.11 with Linux support
|
||
Copyright 1998 Free Software Foundation, Inc.
|
||
GDB is free software, covered by the GNU General Public License, and you are
|
||
welcome to change it and/or distribute copies of it under certain conditions.
|
||
Type "show copying" to see the conditions.
|
||
There is absolutely no warranty for GDB. Type "show warranty" for details.
|
||
This GDB was configured as "i386-redhat-linux"...
|
||
|
||
(gdb) att 1935
|
||
Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 1935
|
||
0x100756d9 in __wait4 ()
|
||
|
||
|
||
|
||
|
||
|
||
|
||
Let's see what's currently running:
|
||
|
||
|
||
|
||
(gdb) p current_task.pid
|
||
$1 = 0
|
||
|
||
|
||
|
||
|
||
|
||
It's the idle thread, which means that fsck went to sleep for some
|
||
reason and never woke up.
|
||
|
||
|
||
Let's guess that the last process in the process list is fsck:
|
||
|
||
|
||
|
||
(gdb) p current_task.prev_task.comm
|
||
$13 = "fsck.ext2\000\000\000\000\000\000"
|
||
|
||
|
||
|
||
|
||
|
||
It is, so let's see what it thinks it's up to:
|
||
|
||
|
||
|
||
(gdb) p current_task.prev_task.thread
|
||
$14 = {extern_pid = 1980, tracing = 0, want_tracing = 0, forking = 0,
|
||
kernel_stack_page = 0, signal_stack = 1342627840, syscall = {id = 4, args = {
|
||
3, 134973440, 1024, 0, 1024}, have_result = 0, result = 50590720},
|
||
request = {op = 2, u = {exec = {ip = 1350467584, sp = 2952789424}, fork = {
|
||
regs = {1350467584, 2952789424, 0 <repeats 15 times>}, sigstack = 0,
|
||
pid = 0}, switch_to = 0x507e8000, thread = {proc = 0x507e8000,
|
||
arg = 0xaffffdb0, flags = 0, new_pid = 0}, input_request = {
|
||
op = 1350467584, fd = -1342177872, proc = 0, pid = 0}}}}
|
||
|
||
|
||
|
||
|
||
|
||
The interesting things here are the fact that its .thread.syscall.id
|
||
is __NR_write (see the big switch in arch/um/kernel/syscall_kern.c or
|
||
the defines in include/asm-um/arch/unistd.h), and that it never
|
||
returned. Also, its .request.op is OP_SWITCH (see
|
||
arch/um/include/user_util.h). These mean that it went into a write,
|
||
and, for some reason, called schedule().
|
||
|
||
|
||
The fact that it never returned from write means that its stack should
|
||
be fairly interesting. Its pid is 1980 (.thread.extern_pid). That
|
||
process is being ptraced by the signal thread, so it must be detached
|
||
before gdb can attach it:
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
(gdb) call detach(1980)
|
||
|
||
Program received signal SIGSEGV, Segmentation fault.
|
||
<function called from gdb>
|
||
The program being debugged stopped while in a function called from GDB.
|
||
When the function (detach) is done executing, GDB will silently
|
||
stop (instead of continuing to evaluate the expression containing
|
||
the function call).
|
||
(gdb) call detach(1980)
|
||
$15 = 0
|
||
|
||
|
||
|
||
|
||
|
||
The first detach segfaults for some reason, and the second one
|
||
succeeds.
|
||
|
||
|
||
Now I detach from the signal thread, attach to the fsck thread, and
|
||
look at its stack:
|
||
|
||
|
||
(gdb) det
|
||
Detaching from program: /home/dike/linux/2.3.26/um/linux Pid 1935
|
||
(gdb) att 1980
|
||
Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 1980
|
||
0x10070451 in __kill ()
|
||
(gdb) bt
|
||
#0 0x10070451 in __kill ()
|
||
#1 0x10068ccd in usr1_pid (pid=1980) at process.c:30
|
||
#2 0x1006a03f in _switch_to (prev=0x50072000, next=0x507e8000)
|
||
at process_kern.c:156
|
||
#3 0x1006a052 in switch_to (prev=0x50072000, next=0x507e8000, last=0x50072000)
|
||
at process_kern.c:161
|
||
#4 0x10001d12 in schedule () at sched.c:777
|
||
#5 0x1006a744 in __down (sem=0x507d241c) at semaphore.c:71
|
||
#6 0x1006aa10 in __down_failed () at semaphore.c:157
|
||
#7 0x1006c5d8 in segv_handler (sc=0x5006e940) at trap_user.c:174
|
||
#8 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182
|
||
#9 <signal handler called>
|
||
#10 0x10155404 in errno ()
|
||
#11 0x1006c0aa in segv (address=1342179328, is_write=2) at trap_kern.c:50
|
||
#12 0x1006c5d8 in segv_handler (sc=0x5006eaf8) at trap_user.c:174
|
||
#13 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182
|
||
#14 <signal handler called>
|
||
#15 0xc0fd in ?? ()
|
||
#16 0x10016647 in sys_write (fd=3,
|
||
buf=0x80b8800 <Address 0x80b8800 out of bounds>, count=1024)
|
||
at read_write.c:159
|
||
#17 0x1006d5b3 in execute_syscall (syscall=4, args=0x5006ef08)
|
||
at syscall_kern.c:254
|
||
#18 0x1006af87 in really_do_syscall (sig=12) at syscall_user.c:35
|
||
#19 <signal handler called>
|
||
#20 0x400dc8b0 in ?? ()
|
||
|
||
|
||
|
||
|
||
|
||
The interesting things here are :
|
||
|
||
+o There are two segfaults on this stack (frames 9 and 14)
|
||
|
||
+o The first faulting address (frame 11) is 0x50000800
|
||
|
||
(gdb) p (void *)1342179328
|
||
$16 = (void *) 0x50000800
|
||
|
||
|
||
|
||
|
||
|
||
The initial faulting address is interesting because it is on the idle
|
||
thread's stack. I had been seeing the idle thread segfault for no
|
||
apparent reason, and the cause looked like stack corruption. In hopes
|
||
of catching the culprit in the act, I had turned off all protections
|
||
to that stack while the idle thread wasn't running. This apparently
|
||
tripped that trap.
|
||
|
||
|
||
However, the more immediate problem is that second segfault and I'm
|
||
going to concentrate on that. First, I want to see where the fault
|
||
happened, so I have to go look at the sigcontent struct in frame 8:
|
||
|
||
|
||
|
||
(gdb) up
|
||
#1 0x10068ccd in usr1_pid (pid=1980) at process.c:30
|
||
30 kill(pid, SIGUSR1);
|
||
(gdb)
|
||
#2 0x1006a03f in _switch_to (prev=0x50072000, next=0x507e8000)
|
||
at process_kern.c:156
|
||
156 usr1_pid(getpid());
|
||
(gdb)
|
||
#3 0x1006a052 in switch_to (prev=0x50072000, next=0x507e8000, last=0x50072000)
|
||
at process_kern.c:161
|
||
161 _switch_to(prev, next);
|
||
(gdb)
|
||
#4 0x10001d12 in schedule () at sched.c:777
|
||
777 switch_to(prev, next, prev);
|
||
(gdb)
|
||
#5 0x1006a744 in __down (sem=0x507d241c) at semaphore.c:71
|
||
71 schedule();
|
||
(gdb)
|
||
#6 0x1006aa10 in __down_failed () at semaphore.c:157
|
||
157 }
|
||
(gdb)
|
||
#7 0x1006c5d8 in segv_handler (sc=0x5006e940) at trap_user.c:174
|
||
174 segv(sc->cr2, sc->err & 2);
|
||
(gdb)
|
||
#8 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182
|
||
182 segv_handler(sc);
|
||
(gdb) p *sc
|
||
Cannot access memory at address 0x0.
|
||
|
||
|
||
|
||
|
||
That's not very useful, so I'll try a more manual method:
|
||
|
||
|
||
(gdb) p *((struct sigcontext *) (&sig + 1))
|
||
$19 = {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds = 43,
|
||
__dsh = 0, edi = 1342179328, esi = 1350378548, ebp = 1342630440,
|
||
esp = 1342630420, ebx = 1348150624, edx = 1280, ecx = 0, eax = 0,
|
||
trapno = 14, err = 4, eip = 268480945, cs = 35, __csh = 0, eflags = 66118,
|
||
esp_at_signal = 1342630420, ss = 43, __ssh = 0, fpstate = 0x0, oldmask = 0,
|
||
cr2 = 1280}
|
||
|
||
|
||
|
||
The ip is in handle_mm_fault:
|
||
|
||
|
||
(gdb) p (void *)268480945
|
||
$20 = (void *) 0x1000b1b1
|
||
(gdb) i sym $20
|
||
handle_mm_fault + 57 in section .text
|
||
|
||
|
||
|
||
|
||
|
||
Specifically, it's in pte_alloc:
|
||
|
||
|
||
(gdb) i line *$20
|
||
Line 124 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
|
||
starts at address 0x1000b1b1 <handle_mm_fault+57>
|
||
and ends at 0x1000b1b7 <handle_mm_fault+63>.
|
||
|
||
|
||
|
||
|
||
|
||
To find where in handle_mm_fault this is, I'll jump forward in the
|
||
code until I see an address in that procedure:
|
||
|
||
|
||
|
||
(gdb) i line *0x1000b1c0
|
||
Line 126 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
|
||
starts at address 0x1000b1b7 <handle_mm_fault+63>
|
||
and ends at 0x1000b1c3 <handle_mm_fault+75>.
|
||
(gdb) i line *0x1000b1d0
|
||
Line 131 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
|
||
starts at address 0x1000b1d0 <handle_mm_fault+88>
|
||
and ends at 0x1000b1da <handle_mm_fault+98>.
|
||
(gdb) i line *0x1000b1e0
|
||
Line 61 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
|
||
starts at address 0x1000b1da <handle_mm_fault+98>
|
||
and ends at 0x1000b1e1 <handle_mm_fault+105>.
|
||
(gdb) i line *0x1000b1f0
|
||
Line 134 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
|
||
starts at address 0x1000b1f0 <handle_mm_fault+120>
|
||
and ends at 0x1000b200 <handle_mm_fault+136>.
|
||
(gdb) i line *0x1000b200
|
||
Line 135 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
|
||
starts at address 0x1000b200 <handle_mm_fault+136>
|
||
and ends at 0x1000b208 <handle_mm_fault+144>.
|
||
(gdb) i line *0x1000b210
|
||
Line 139 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
|
||
starts at address 0x1000b210 <handle_mm_fault+152>
|
||
and ends at 0x1000b219 <handle_mm_fault+161>.
|
||
(gdb) i line *0x1000b220
|
||
Line 1168 of "memory.c" starts at address 0x1000b21e <handle_mm_fault+166>
|
||
and ends at 0x1000b222 <handle_mm_fault+170>.
|
||
|
||
|
||
|
||
|
||
|
||
Something is apparently wrong with the page tables or vma_structs, so
|
||
lets go back to frame 11 and have a look at them:
|
||
|
||
|
||
|
||
#11 0x1006c0aa in segv (address=1342179328, is_write=2) at trap_kern.c:50
|
||
50 handle_mm_fault(current, vma, address, is_write);
|
||
(gdb) call pgd_offset_proc(vma->vm_mm, address)
|
||
$22 = (pgd_t *) 0x80a548c
|
||
|
||
|
||
|
||
|
||
|
||
That's pretty bogus. Page tables aren't supposed to be in process
|
||
text or data areas. Let's see what's in the vma:
|
||
|
||
|
||
(gdb) p *vma
|
||
$23 = {vm_mm = 0x507d2434, vm_start = 0, vm_end = 134512640,
|
||
vm_next = 0x80a4f8c, vm_page_prot = {pgprot = 0}, vm_flags = 31200,
|
||
vm_avl_height = 2058, vm_avl_left = 0x80a8c94, vm_avl_right = 0x80d1000,
|
||
vm_next_share = 0xaffffdb0, vm_pprev_share = 0xaffffe63,
|
||
vm_ops = 0xaffffe7a, vm_pgoff = 2952789626, vm_file = 0xafffffec,
|
||
vm_private_data = 0x62}
|
||
(gdb) p *vma.vm_mm
|
||
$24 = {mmap = 0x507d2434, mmap_avl = 0x0, mmap_cache = 0x8048000,
|
||
pgd = 0x80a4f8c, mm_users = {counter = 0}, mm_count = {counter = 134904288},
|
||
map_count = 134909076, mmap_sem = {count = {counter = 135073792},
|
||
sleepers = -1342177872, wait = {lock = <optimized out or zero length>,
|
||
task_list = {next = 0xaffffe63, prev = 0xaffffe7a},
|
||
__magic = -1342177670, __creator = -1342177300}, __magic = 98},
|
||
page_table_lock = {}, context = 138, start_code = 0, end_code = 0,
|
||
start_data = 0, end_data = 0, start_brk = 0, brk = 0, start_stack = 0,
|
||
arg_start = 0, arg_end = 0, env_start = 0, env_end = 0, rss = 1350381536,
|
||
total_vm = 0, locked_vm = 0, def_flags = 0, cpu_vm_mask = 0, swap_cnt = 0,
|
||
swap_address = 0, segments = 0x0}
|
||
|
||
|
||
|
||
|
||
|
||
This also pretty bogus. With all of the 0x80xxxxx and 0xaffffxxx
|
||
addresses, this is looking like a stack was plonked down on top of
|
||
these structures. Maybe it's a stack overflow from the next page:
|
||
|
||
|
||
|
||
(gdb) p vma
|
||
$25 = (struct vm_area_struct *) 0x507d2434
|
||
|
||
|
||
|
||
|
||
|
||
That's towards the lower quarter of the page, so that would have to
|
||
have been pretty heavy stack overflow:
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
(gdb) x/100x $25
|
||
0x507d2434: 0x507d2434 0x00000000 0x08048000 0x080a4f8c
|
||
0x507d2444: 0x00000000 0x080a79e0 0x080a8c94 0x080d1000
|
||
0x507d2454: 0xaffffdb0 0xaffffe63 0xaffffe7a 0xaffffe7a
|
||
0x507d2464: 0xafffffec 0x00000062 0x0000008a 0x00000000
|
||
0x507d2474: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2484: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2494: 0x00000000 0x00000000 0x507d2fe0 0x00000000
|
||
0x507d24a4: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d24b4: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d24c4: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d24d4: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d24e4: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d24f4: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2504: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2514: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2524: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2534: 0x00000000 0x00000000 0x507d25dc 0x00000000
|
||
0x507d2544: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2554: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2564: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2574: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2584: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d2594: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d25a4: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
0x507d25b4: 0x00000000 0x00000000 0x00000000 0x00000000
|
||
|
||
|
||
|
||
|
||
|
||
It's not stack overflow. The only "stack-like" piece of this data is
|
||
the vma_struct itself.
|
||
|
||
|
||
At this point, I don't see any avenues to pursue, so I just have to
|
||
admit that I have no idea what's going on. What I will do, though, is
|
||
stick a trap on the segfault handler which will stop if it sees any
|
||
writes to the idle thread's stack. That was the thing that happened
|
||
first, and it may be that if I can catch it immediately, what's going
|
||
on will be somewhat clearer.
|
||
|
||
|
||
1122..22.. EEppiissooddee 22:: TThhee ccaassee ooff tthhee hhuunngg ffsscckk
|
||
|
||
After setting a trap in the SEGV handler for accesses to the signal
|
||
thread's stack, I reran the kernel.
|
||
|
||
|
||
fsck hung again, this time by hitting the trap:
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
Setting hostname uml [ OK ]
|
||
Checking root filesystem
|
||
/dev/fhd0 contains a file system with errors, check forced.
|
||
Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780.
|
||
|
||
/dev/fhd0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
|
||
(i.e., without -a or -p options)
|
||
[ FAILED ]
|
||
|
||
*** An error occurred during the file system check.
|
||
*** Dropping you to a shell; the system will reboot
|
||
*** when you leave the shell.
|
||
Give root password for maintenance
|
||
(or type Control-D for normal startup):
|
||
|
||
[root@uml /root]# fsck -y /dev/fhd0
|
||
fsck -y /dev/fhd0
|
||
Parallelizing fsck version 1.14 (9-Jan-1999)
|
||
e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09
|
||
/dev/fhd0 contains a file system with errors, check forced.
|
||
Pass 1: Checking inodes, blocks, and sizes
|
||
Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. Ignore error? yes
|
||
|
||
Pass 2: Checking directory structure
|
||
Error reading block 49405 (Attempt to read block from filesystem resulted in short read). Ignore error? yes
|
||
|
||
Directory inode 11858, block 0, offset 0: directory corrupted
|
||
Salvage? yes
|
||
|
||
Missing '.' in directory inode 11858.
|
||
Fix? yes
|
||
|
||
Missing '..' in directory inode 11858.
|
||
Fix? yes
|
||
|
||
Untested (4127) [100fe44c]: trap_kern.c line 31
|
||
|
||
|
||
|
||
|
||
|
||
I need to get the signal thread to detach from pid 4127 so that I can
|
||
attach to it with gdb. This is done by sending it a SIGUSR1, which is
|
||
caught by the signal thread, which detaches the process:
|
||
|
||
|
||
kill -USR1 4127
|
||
|
||
|
||
|
||
|
||
|
||
Now I can run gdb on it:
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
~/linux/2.3.26/um 1034: gdb linux
|
||
GNU gdb 4.17.0.11 with Linux support
|
||
Copyright 1998 Free Software Foundation, Inc.
|
||
GDB is free software, covered by the GNU General Public License, and you are
|
||
welcome to change it and/or distribute copies of it under certain conditions.
|
||
Type "show copying" to see the conditions.
|
||
There is absolutely no warranty for GDB. Type "show warranty" for details.
|
||
This GDB was configured as "i386-redhat-linux"...
|
||
(gdb) att 4127
|
||
Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 4127
|
||
0x10075891 in __libc_nanosleep ()
|
||
|
||
|
||
|
||
|
||
|
||
The backtrace shows that it was in a write and that the fault address
|
||
(address in frame 3) is 0x50000800, which is right in the middle of
|
||
the signal thread's stack page:
|
||
|
||
|
||
(gdb) bt
|
||
#0 0x10075891 in __libc_nanosleep ()
|
||
#1 0x1007584d in __sleep (seconds=1000000)
|
||
at ../sysdeps/unix/sysv/linux/sleep.c:78
|
||
#2 0x1006ce9a in stop () at user_util.c:191
|
||
#3 0x1006bf88 in segv (address=1342179328, is_write=2) at trap_kern.c:31
|
||
#4 0x1006c628 in segv_handler (sc=0x5006eaf8) at trap_user.c:174
|
||
#5 0x1006c63c in kern_segv_handler (sig=11) at trap_user.c:182
|
||
#6 <signal handler called>
|
||
#7 0xc0fd in ?? ()
|
||
#8 0x10016647 in sys_write (fd=3, buf=0x80b8800 "R.", count=1024)
|
||
at read_write.c:159
|
||
#9 0x1006d603 in execute_syscall (syscall=4, args=0x5006ef08)
|
||
at syscall_kern.c:254
|
||
#10 0x1006af87 in really_do_syscall (sig=12) at syscall_user.c:35
|
||
#11 <signal handler called>
|
||
#12 0x400dc8b0 in ?? ()
|
||
#13 <signal handler called>
|
||
#14 0x400dc8b0 in ?? ()
|
||
#15 0x80545fd in ?? ()
|
||
#16 0x804daae in ?? ()
|
||
#17 0x8054334 in ?? ()
|
||
#18 0x804d23e in ?? ()
|
||
#19 0x8049632 in ?? ()
|
||
#20 0x80491d2 in ?? ()
|
||
#21 0x80596b5 in ?? ()
|
||
(gdb) p (void *)1342179328
|
||
$3 = (void *) 0x50000800
|
||
|
||
|
||
|
||
|
||
|
||
Going up the stack to the segv_handler frame and looking at where in
|
||
the code the access happened shows that it happened near line 110 of
|
||
block_dev.c:
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
(gdb) up
|
||
#1 0x1007584d in __sleep (seconds=1000000)
|
||
at ../sysdeps/unix/sysv/linux/sleep.c:78
|
||
../sysdeps/unix/sysv/linux/sleep.c:78: No such file or directory.
|
||
(gdb)
|
||
#2 0x1006ce9a in stop () at user_util.c:191
|
||
191 while(1) sleep(1000000);
|
||
(gdb)
|
||
#3 0x1006bf88 in segv (address=1342179328, is_write=2) at trap_kern.c:31
|
||
31 KERN_UNTESTED();
|
||
(gdb)
|
||
#4 0x1006c628 in segv_handler (sc=0x5006eaf8) at trap_user.c:174
|
||
174 segv(sc->cr2, sc->err & 2);
|
||
(gdb) p *sc
|
||
$1 = {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds = 43,
|
||
__dsh = 0, edi = 1342179328, esi = 134973440, ebp = 1342631484,
|
||
esp = 1342630864, ebx = 256, edx = 0, ecx = 256, eax = 1024, trapno = 14,
|
||
err = 6, eip = 268550834, cs = 35, __csh = 0, eflags = 66070,
|
||
esp_at_signal = 1342630864, ss = 43, __ssh = 0, fpstate = 0x0, oldmask = 0,
|
||
cr2 = 1342179328}
|
||
(gdb) p (void *)268550834
|
||
$2 = (void *) 0x1001c2b2
|
||
(gdb) i sym $2
|
||
block_write + 1090 in section .text
|
||
(gdb) i line *$2
|
||
Line 209 of "/home/dike/linux/2.3.26/um/include/asm/arch/string.h"
|
||
starts at address 0x1001c2a1 <block_write+1073>
|
||
and ends at 0x1001c2bf <block_write+1103>.
|
||
(gdb) i line *0x1001c2c0
|
||
Line 110 of "block_dev.c" starts at address 0x1001c2bf <block_write+1103>
|
||
and ends at 0x1001c2e3 <block_write+1139>.
|
||
|
||
|
||
|
||
|
||
|
||
Looking at the source shows that the fault happened during a call to
|
||
copy_to_user to copy the data into the kernel:
|
||
|
||
|
||
107 count -= chars;
|
||
108 copy_from_user(p,buf,chars);
|
||
109 p += chars;
|
||
110 buf += chars;
|
||
|
||
|
||
|
||
|
||
|
||
p is the pointer which must contain 0x50000800, since buf contains
|
||
0x80b8800 (frame 8 above). It is defined as:
|
||
|
||
|
||
p = offset + bh->b_data;
|
||
|
||
|
||
|
||
|
||
|
||
I need to figure out what bh is, and it just so happens that bh is
|
||
passed as an argument to mark_buffer_uptodate and mark_buffer_dirty a
|
||
few lines later, so I do a little disassembly:
|
||
|
||
|
||
|
||
|
||
(gdb) disas 0x1001c2bf 0x1001c2e0
|
||
Dump of assembler code from 0x1001c2bf to 0x1001c2d0:
|
||
0x1001c2bf <block_write+1103>: addl %eax,0xc(%ebp)
|
||
0x1001c2c2 <block_write+1106>: movl 0xfffffdd4(%ebp),%edx
|
||
0x1001c2c8 <block_write+1112>: btsl $0x0,0x18(%edx)
|
||
0x1001c2cd <block_write+1117>: btsl $0x1,0x18(%edx)
|
||
0x1001c2d2 <block_write+1122>: sbbl %ecx,%ecx
|
||
0x1001c2d4 <block_write+1124>: testl %ecx,%ecx
|
||
0x1001c2d6 <block_write+1126>: jne 0x1001c2e3 <block_write+1139>
|
||
0x1001c2d8 <block_write+1128>: pushl $0x0
|
||
0x1001c2da <block_write+1130>: pushl %edx
|
||
0x1001c2db <block_write+1131>: call 0x1001819c <__mark_buffer_dirty>
|
||
End of assembler dump.
|
||
|
||
|
||
|
||
|
||
|
||
At that point, bh is in %edx (address 0x1001c2da), which is calculated
|
||
at 0x1001c2c2 as %ebp + 0xfffffdd4, so I figure exactly what that is,
|
||
taking %ebp from the sigcontext_struct above:
|
||
|
||
|
||
(gdb) p (void *)1342631484
|
||
$5 = (void *) 0x5006ee3c
|
||
(gdb) p 0x5006ee3c+0xfffffdd4
|
||
$6 = 1342630928
|
||
(gdb) p (void *)$6
|
||
$7 = (void *) 0x5006ec10
|
||
(gdb) p *((void **)$7)
|
||
$8 = (void *) 0x50100200
|
||
|
||
|
||
|
||
|
||
|
||
Now, I look at the structure to see what's in it, and particularly,
|
||
what its b_data field contains:
|
||
|
||
|
||
(gdb) p *((struct buffer_head *)0x50100200)
|
||
$13 = {b_next = 0x50289380, b_blocknr = 49405, b_size = 1024, b_list = 0,
|
||
b_dev = 15872, b_count = {counter = 1}, b_rdev = 15872, b_state = 24,
|
||
b_flushtime = 0, b_next_free = 0x501001a0, b_prev_free = 0x50100260,
|
||
b_this_page = 0x501001a0, b_reqnext = 0x0, b_pprev = 0x507fcf58,
|
||
b_data = 0x50000800 "", b_page = 0x50004000,
|
||
b_end_io = 0x10017f60 <end_buffer_io_sync>, b_dev_id = 0x0,
|
||
b_rsector = 98810, b_wait = {lock = <optimized out or zero length>,
|
||
task_list = {next = 0x50100248, prev = 0x50100248}, __magic = 1343226448,
|
||
__creator = 0}, b_kiobuf = 0x0}
|
||
|
||
|
||
|
||
|
||
|
||
The b_data field is indeed 0x50000800, so the question becomes how
|
||
that happened. The rest of the structure looks fine, so this probably
|
||
is not a case of data corruption. It happened on purpose somehow.
|
||
|
||
|
||
The b_page field is a pointer to the page_struct representing the
|
||
0x50000000 page. Looking at it shows the kernel's idea of the state
|
||
of that page:
|
||
|
||
|
||
|
||
(gdb) p *$13.b_page
|
||
$17 = {list = {next = 0x50004a5c, prev = 0x100c5174}, mapping = 0x0,
|
||
index = 0, next_hash = 0x0, count = {counter = 1}, flags = 132, lru = {
|
||
next = 0x50008460, prev = 0x50019350}, wait = {
|
||
lock = <optimized out or zero length>, task_list = {next = 0x50004024,
|
||
prev = 0x50004024}, __magic = 1342193708, __creator = 0},
|
||
pprev_hash = 0x0, buffers = 0x501002c0, virtual = 1342177280,
|
||
zone = 0x100c5160}
|
||
|
||
|
||
|
||
|
||
|
||
Some sanity-checking: the virtual field shows the "virtual" address of
|
||
this page, which in this kernel is the same as its "physical" address,
|
||
and the page_struct itself should be mem_map[0], since it represents
|
||
the first page of memory:
|
||
|
||
|
||
|
||
(gdb) p (void *)1342177280
|
||
$18 = (void *) 0x50000000
|
||
(gdb) p mem_map
|
||
$19 = (mem_map_t *) 0x50004000
|
||
|
||
|
||
|
||
|
||
|
||
These check out fine.
|
||
|
||
|
||
Now to check out the page_struct itself. In particular, the flags
|
||
field shows whether the page is considered free or not:
|
||
|
||
|
||
(gdb) p (void *)132
|
||
$21 = (void *) 0x84
|
||
|
||
|
||
|
||
|
||
|
||
The "reserved" bit is the high bit, which is definitely not set, so
|
||
the kernel considers the signal stack page to be free and available to
|
||
be used.
|
||
|
||
|
||
At this point, I jump to conclusions and start looking at my early
|
||
boot code, because that's where that page is supposed to be reserved.
|
||
|
||
|
||
In my setup_arch procedure, I have the following code which looks just
|
||
fine:
|
||
|
||
|
||
|
||
bootmap_size = init_bootmem(start_pfn, end_pfn - start_pfn);
|
||
free_bootmem(__pa(low_physmem) + bootmap_size, high_physmem - low_physmem);
|
||
|
||
|
||
|
||
|
||
|
||
Two stack pages have already been allocated, and low_physmem points to
|
||
the third page, which is the beginning of free memory.
|
||
The init_bootmem call declares the entire memory to the boot memory
|
||
manager, which marks it all reserved. The free_bootmem call frees up
|
||
all of it, except for the first two pages. This looks correct to me.
|
||
|
||
|
||
So, I decide to see init_bootmem run and make sure that it is marking
|
||
those first two pages as reserved. I never get that far.
|
||
|
||
|
||
Stepping into init_bootmem, and looking at bootmem_map before looking
|
||
at what it contains shows the following:
|
||
|
||
|
||
|
||
(gdb) p bootmem_map
|
||
$3 = (void *) 0x50000000
|
||
|
||
|
||
|
||
|
||
|
||
Aha! The light dawns. That first page is doing double duty as a
|
||
stack and as the boot memory map. The last thing that the boot memory
|
||
manager does is to free the pages used by its memory map, so this page
|
||
is getting freed even its marked as reserved.
|
||
|
||
|
||
The fix was to initialize the boot memory manager before allocating
|
||
those two stack pages, and then allocate them through the boot memory
|
||
manager. After doing this, and fixing a couple of subsequent buglets,
|
||
the stack corruption problem disappeared.
|
||
|
||
|
||
|
||
|
||
|
||
1133.. WWhhaatt ttoo ddoo wwhheenn UUMMLL ddooeessnn''tt wwoorrkk
|
||
|
||
|
||
|
||
|
||
1133..11.. SSttrraannggee ccoommppiillaattiioonn eerrrroorrss wwhheenn yyoouu bbuuiilldd ffrroomm ssoouurrccee
|
||
|
||
As of test11, it is necessary to have "ARCH=um" in the environment or
|
||
on the make command line for all steps in building UML, including
|
||
clean, distclean, or mrproper, config, menuconfig, or xconfig, dep,
|
||
and linux. If you forget for any of them, the i386 build seems to
|
||
contaminate the UML build. If this happens, start from scratch with
|
||
|
||
|
||
host%
|
||
make mrproper ARCH=um
|
||
|
||
|
||
|
||
|
||
and repeat the build process with ARCH=um on all the steps.
|
||
|
||
|
||
See ``Compiling the kernel and modules'' for more details.
|
||
|
||
|
||
Another cause of strange compilation errors is building UML in
|
||
/usr/src/linux. If you do this, the first thing you need to do is
|
||
clean up the mess you made. The /usr/src/linux/asm link will now
|
||
point to /usr/src/linux/asm-um. Make it point back to
|
||
/usr/src/linux/asm-i386. Then, move your UML pool someplace else and
|
||
build it there. Also see below, where a more specific set of symptoms
|
||
is described.
|
||
|
||
|
||
|
||
1133..22.. UUMMLL hhaannggss oonn bboooott aafftteerr mmoouunnttiinngg ddeevvffss
|
||
|
||
The boot looks like this:
|
||
|
||
|
||
VFS: Mounted root (ext2 filesystem) readonly.
|
||
Mounted devfs on /dev
|
||
|
||
|
||
|
||
|
||
You're probably running a recent distribution on an old machine. I
|
||
saw this with the RH7.1 filesystem running on a Pentium. The shared
|
||
library loader, ld.so, was executing an instruction (cmove) which the
|
||
Pentium didn't support. That instruction was apparently added later.
|
||
If you run UML under the debugger, you'll see the hang caused by one
|
||
instruction causing an infinite SIGILL stream.
|
||
|
||
|
||
The fix is to boot UML on an older filesystem.
|
||
|
||
|
||
|
||
1133..33.. AA vvaarriieettyy ooff ppaanniiccss aanndd hhaannggss wwiitthh //ttmmpp oonn aa rreeiisseerrffss ffiilleessyyss--
|
||
tteemm
|
||
|
||
I saw this on reiserfs 3.5.21 and it seems to be fixed in 3.5.27.
|
||
Panics preceded by
|
||
|
||
|
||
Detaching pid nnnn
|
||
|
||
|
||
|
||
are diagnostic of this problem. This is a reiserfs bug which causes a
|
||
thread to occasionally read stale data from a mmapped page shared with
|
||
another thread. The fix is to upgrade the filesystem or to have /tmp
|
||
be an ext2 filesystem.
|
||
|
||
|
||
|
||
1133..44.. TThhee ccoommppiillee ffaaiillss wwiitthh eerrrroorrss aabboouutt ccoonnfflliiccttiinngg ttyyppeess ffoorr
|
||
''ooppeenn'',, ''dduupp'',, aanndd ''wwaaiittppiidd''
|
||
|
||
This happens when you build in /usr/src/linux. The UML build makes
|
||
the include/asm link point to include/asm-um. /usr/include/asm points
|
||
to /usr/src/linux/include/asm, so when that link gets moved, files
|
||
which need to include the asm-i386 versions of headers get the
|
||
incompatible asm-um versions. The fix is to move the include/asm link
|
||
back to include/asm-i386 and to do UML builds someplace else.
|
||
|
||
|
||
|
||
1133..55.. UUMMLL ddooeessnn''tt wwoorrkk wwhheenn //ttmmpp iiss aann NNFFSS ffiilleessyysstteemm
|
||
|
||
This seems to be a similar situation with the resierfs problem above.
|
||
Some versions of NFS seems not to handle mmap correctly, which UML
|
||
depends on. The workaround is have /tmp be non-NFS directory.
|
||
|
||
|
||
1133..66.. UUMMLL hhaannggss oonn bboooott wwhheenn ccoommppiilleedd wwiitthh ggpprrooff ssuuppppoorrtt
|
||
|
||
If you build UML with gprof support and, early in the boot, it does
|
||
this
|
||
|
||
|
||
kernel BUG at page_alloc.c:100!
|
||
|
||
|
||
|
||
|
||
you have a buggy gcc. You can work around the problem by removing
|
||
UM_FASTCALL from CFLAGS in arch/um/Makefile-i386. This will open up
|
||
another bug, but that one is fairly hard to reproduce.
|
||
|
||
|
||
|
||
1133..77.. ssyyssllooggdd ddiieess wwiitthh aa SSIIGGTTEERRMM oonn ssttaarrttuupp
|
||
|
||
The exact boot error depends on the distribution that you're booting,
|
||
but Debian produces this:
|
||
|
||
|
||
/etc/rc2.d/S10sysklogd: line 49: 93 Terminated
|
||
start-stop-daemon --start --quiet --exec /sbin/syslogd -- $SYSLOGD
|
||
|
||
|
||
|
||
|
||
This is a syslogd bug. There's a race between a parent process
|
||
installing a signal handler and its child sending the signal. See
|
||
this uml-devel post <http://www.geocrawler.com/lists/3/Source-
|
||
Forge/709/0/6612801> for the details.
|
||
|
||
|
||
|
||
1133..88.. TTUUNN//TTAAPP nneettwwoorrkkiinngg ddooeessnn''tt wwoorrkk oonn aa 22..44 hhoosstt
|
||
|
||
There are a couple of problems which were
|
||
<http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="pointed
|
||
out"> by Tim Robinson <timro at trkr dot net>
|
||
|
||
+o It doesn't work on hosts running 2.4.7 (or thereabouts) or earlier.
|
||
The fix is to upgrade to something more recent and then read the
|
||
next item.
|
||
|
||
+o If you see
|
||
|
||
|
||
File descriptor in bad state
|
||
|
||
|
||
|
||
when you bring up the device inside UML, you have a header mismatch
|
||
between the original kernel and the upgraded one. Make /usr/src/linux
|
||
point at the new headers. This will only be a problem if you build
|
||
uml_net yourself.
|
||
|
||
|
||
|
||
1133..99.. YYoouu ccaann nneettwwoorrkk ttoo tthhee hhoosstt bbuutt nnoott ttoo ootthheerr mmaacchhiinneess oonn tthhee
|
||
nneett
|
||
|
||
If you can connect to the host, and the host can connect to UML, but
|
||
you can not connect to any other machines, then you may need to enable
|
||
IP Masquerading on the host. Usually this is only experienced when
|
||
using private IP addresses (192.168.x.x or 10.x.x.x) for host/UML
|
||
networking, rather than the public address space that your host is
|
||
connected to. UML does not enable IP Masquerading, so you will need
|
||
to create a static rule to enable it:
|
||
|
||
|
||
host%
|
||
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
|
||
|
||
|
||
|
||
|
||
Replace eth0 with the interface that you use to talk to the rest of
|
||
the world.
|
||
|
||
|
||
Documentation on IP Masquerading, and SNAT, can be found at
|
||
www.netfilter.org <http://www.netfilter.org> .
|
||
|
||
|
||
If you can reach the local net, but not the outside Internet, then
|
||
that is usually a routing problem. The UML needs a default route:
|
||
|
||
|
||
UML#
|
||
route add default gw gateway IP
|
||
|
||
|
||
|
||
|
||
The gateway IP can be any machine on the local net that knows how to
|
||
reach the outside world. Usually, this is the host or the local net-
|
||
work's gateway.
|
||
|
||
|
||
Occasionally, we hear from someone who can reach some machines, but
|
||
not others on the same net, or who can reach some ports on other
|
||
machines, but not others. These are usually caused by strange
|
||
firewalling somewhere between the UML and the other box. You track
|
||
this down by running tcpdump on every interface the packets travel
|
||
over and see where they disappear. When you find a machine that takes
|
||
the packets in, but does not send them onward, that's the culprit.
|
||
|
||
|
||
|
||
1133..1100.. II hhaavvee nnoo rroooott aanndd II wwaanntt ttoo ssccrreeaamm
|
||
|
||
Thanks to Birgit Wahlich for telling me about this strange one. It
|
||
turns out that there's a limit of six environment variables on the
|
||
kernel command line. When that limit is reached or exceeded, argument
|
||
processing stops, which means that the 'root=' argument that UML
|
||
usually adds is not seen. So, the filesystem has no idea what the
|
||
root device is, so it panics.
|
||
|
||
|
||
The fix is to put less stuff on the command line. Glomming all your
|
||
setup variables into one is probably the best way to go.
|
||
|
||
|
||
|
||
1133..1111.. UUMMLL bbuuiilldd ccoonnfflliicctt bbeettwweeeenn ppttrraaccee..hh aanndd uuccoonntteexxtt..hh
|
||
|
||
On some older systems, /usr/include/asm/ptrace.h and
|
||
/usr/include/sys/ucontext.h define the same names. So, when they're
|
||
included together, the defines from one completely mess up the parsing
|
||
of the other, producing errors like:
|
||
/usr/include/sys/ucontext.h:47: parse error before
|
||
`10'
|
||
|
||
|
||
|
||
|
||
plus a pile of warnings.
|
||
|
||
|
||
This is a libc botch, which has since been fixed, and I don't see any
|
||
way around it besides upgrading.
|
||
|
||
|
||
|
||
1133..1122.. TThhee UUMMLL BBooggooMMiippss iiss eexxaaccttllyy hhaallff tthhee hhoosstt''ss BBooggooMMiippss
|
||
|
||
On i386 kernels, there are two ways of running the loop that is used
|
||
to calculate the BogoMips rating, using the TSC if it's there or using
|
||
a one-instruction loop. The TSC produces twice the BogoMips as the
|
||
loop. UML uses the loop, since it has nothing resembling a TSC, and
|
||
will get almost exactly the same BogoMips as a host using the loop.
|
||
However, on a host with a TSC, its BogoMips will be double the loop
|
||
BogoMips, and therefore double the UML BogoMips.
|
||
|
||
|
||
|
||
1133..1133.. WWhheenn yyoouu rruunn UUMMLL,, iitt iimmmmeeddiiaatteellyy sseeggffaauullttss
|
||
|
||
If the host is configured with the 2G/2G address space split, that's
|
||
why. See ``UML on 2G/2G hosts'' for the details on getting UML to
|
||
run on your host.
|
||
|
||
|
||
|
||
1133..1144.. xxtteerrmmss aappppeeaarr,, tthheenn iimmmmeeddiiaatteellyy ddiissaappppeeaarr
|
||
|
||
If you're running an up to date kernel with an old release of
|
||
uml_utilities, the port-helper program will not work properly, so
|
||
xterms will exit straight after they appear. The solution is to
|
||
upgrade to the latest release of uml_utilities. Usually this problem
|
||
occurs when you have installed a packaged release of UML then compiled
|
||
your own development kernel without upgrading the uml_utilities from
|
||
the source distribution.
|
||
|
||
|
||
|
||
1133..1155.. AAnnyy ootthheerr ppaanniicc,, hhaanngg,, oorr ssttrraannggee bbeehhaavviioorr
|
||
|
||
If you're seeing truly strange behavior, such as hangs or panics that
|
||
happen in random places, or you try running the debugger to see what's
|
||
happening and it acts strangely, then it could be a problem in the
|
||
host kernel. If you're not running a stock Linus or -ac kernel, then
|
||
try that. An early version of the preemption patch and a 2.4.10 SuSE
|
||
kernel have caused very strange problems in UML.
|
||
|
||
|
||
Otherwise, let me know about it. Send a message to one of the UML
|
||
mailing lists - either the developer list - user-mode-linux-devel at
|
||
lists dot sourceforge dot net (subscription info) or the user list -
|
||
user-mode-linux-user at lists dot sourceforge do net (subscription
|
||
info), whichever you prefer. Don't assume that everyone knows about
|
||
it and that a fix is imminent.
|
||
|
||
|
||
If you want to be super-helpful, read ``Diagnosing Problems'' and
|
||
follow the instructions contained therein.
|
||
1144.. DDiiaaggnnoossiinngg PPrroobblleemmss
|
||
|
||
|
||
If you get UML to crash, hang, or otherwise misbehave, you should
|
||
report this on one of the project mailing lists, either the developer
|
||
list - user-mode-linux-devel at lists dot sourceforge dot net
|
||
(subscription info) or the user list - user-mode-linux-user at lists
|
||
dot sourceforge dot net (subscription info). When you do, it is
|
||
likely that I will want more information. So, it would be helpful to
|
||
read the stuff below, do whatever is applicable in your case, and
|
||
report the results to the list.
|
||
|
||
|
||
For any diagnosis, you're going to need to build a debugging kernel.
|
||
The binaries from this site aren't debuggable. If you haven't done
|
||
this before, read about ``Compiling the kernel and modules'' and
|
||
``Kernel debugging'' UML first.
|
||
|
||
|
||
1144..11.. CCaassee 11 :: NNoorrmmaall kkeerrnneell ppaanniiccss
|
||
|
||
The most common case is for a normal thread to panic. To debug this,
|
||
you will need to run it under the debugger (add 'debug' to the command
|
||
line). An xterm will start up with gdb running inside it. Continue
|
||
it when it stops in start_kernel and make it crash. Now ^C gdb and
|
||
|
||
|
||
If the panic was a "Kernel mode fault", then there will be a segv
|
||
frame on the stack and I'm going to want some more information. The
|
||
stack might look something like this:
|
||
|
||
|
||
(UML gdb) backtrace
|
||
#0 0x1009bf76 in __sigprocmask (how=1, set=0x5f347940, oset=0x0)
|
||
at ../sysdeps/unix/sysv/linux/sigprocmask.c:49
|
||
#1 0x10091411 in change_sig (signal=10, on=1) at process.c:218
|
||
#2 0x10094785 in timer_handler (sig=26) at time_kern.c:32
|
||
#3 0x1009bf38 in __restore ()
|
||
at ../sysdeps/unix/sysv/linux/i386/sigaction.c:125
|
||
#4 0x1009534c in segv (address=8, ip=268849158, is_write=2, is_user=0)
|
||
at trap_kern.c:66
|
||
#5 0x10095c04 in segv_handler (sig=11) at trap_user.c:285
|
||
#6 0x1009bf38 in __restore ()
|
||
|
||
|
||
|
||
|
||
I'm going to want to see the symbol and line information for the value
|
||
of ip in the segv frame. In this case, you would do the following:
|
||
|
||
|
||
(UML gdb) i sym 268849158
|
||
|
||
|
||
|
||
|
||
and
|
||
|
||
|
||
(UML gdb) i line *268849158
|
||
|
||
|
||
|
||
|
||
The reason for this is the __restore frame right above the segv_han-
|
||
dler frame is hiding the frame that actually segfaulted. So, I have
|
||
to get that information from the faulting ip.
|
||
|
||
|
||
1144..22.. CCaassee 22 :: TTrraacciinngg tthhrreeaadd ppaanniiccss
|
||
|
||
The less common and more painful case is when the tracing thread
|
||
panics. In this case, the kernel debugger will be useless because it
|
||
needs a healthy tracing thread in order to work. The first thing to
|
||
do is get a backtrace from the tracing thread. This is done by
|
||
figuring out what its pid is, firing up gdb, and attaching it to that
|
||
pid. You can figure out the tracing thread pid by looking at the
|
||
first line of the console output, which will look like this:
|
||
|
||
|
||
tracing thread pid = 15851
|
||
|
||
|
||
|
||
|
||
or by running ps on the host and finding the line that looks like
|
||
this:
|
||
|
||
|
||
jdike 15851 4.5 0.4 132568 1104 pts/0 S 21:34 0:05 ./linux [(tracing thread)]
|
||
|
||
|
||
|
||
|
||
If the panic was 'segfault in signals', then follow the instructions
|
||
above for collecting information about the location of the seg fault.
|
||
|
||
|
||
If the tracing thread flaked out all by itself, then send that
|
||
backtrace in and wait for our crack debugging team to fix the problem.
|
||
|
||
|
||
1144..33.. CCaassee 33 :: TTrraacciinngg tthhrreeaadd ppaanniiccss ccaauusseedd bbyy ootthheerr tthhrreeaaddss
|
||
|
||
However, there are cases where the misbehavior of another thread
|
||
caused the problem. The most common panic of this type is:
|
||
|
||
|
||
wait_for_stop failed to wait for <pid> to stop with <signal number>
|
||
|
||
|
||
|
||
|
||
In this case, you'll need to get a backtrace from the process men-
|
||
tioned in the panic, which is complicated by the fact that the kernel
|
||
debugger is defunct and without some fancy footwork, another gdb can't
|
||
attach to it. So, this is how the fancy footwork goes:
|
||
|
||
In a shell:
|
||
|
||
|
||
host% kill -STOP pid
|
||
|
||
|
||
|
||
|
||
Run gdb on the tracing thread as described in case 2 and do:
|
||
|
||
|
||
(host gdb) call detach(pid)
|
||
|
||
|
||
If you get a segfault, do it again. It always works the second time.
|
||
|
||
Detach from the tracing thread and attach to that other thread:
|
||
|
||
|
||
(host gdb) detach
|
||
|
||
|
||
|
||
|
||
|
||
|
||
(host gdb) attach pid
|
||
|
||
|
||
|
||
|
||
If gdb hangs when attaching to that process, go back to a shell and
|
||
do:
|
||
|
||
|
||
host%
|
||
kill -CONT pid
|
||
|
||
|
||
|
||
|
||
And then get the backtrace:
|
||
|
||
|
||
(host gdb) backtrace
|
||
|
||
|
||
|
||
|
||
|
||
1144..44.. CCaassee 44 :: HHaannggss
|
||
|
||
Hangs seem to be fairly rare, but they sometimes happen. When a hang
|
||
happens, we need a backtrace from the offending process. Run the
|
||
kernel debugger as described in case 1 and get a backtrace. If the
|
||
current process is not the idle thread, then send in the backtrace.
|
||
You can tell that it's the idle thread if the stack looks like this:
|
||
|
||
|
||
#0 0x100b1401 in __libc_nanosleep ()
|
||
#1 0x100a2885 in idle_sleep (secs=10) at time.c:122
|
||
#2 0x100a546f in do_idle () at process_kern.c:445
|
||
#3 0x100a5508 in cpu_idle () at process_kern.c:471
|
||
#4 0x100ec18f in start_kernel () at init/main.c:592
|
||
#5 0x100a3e10 in start_kernel_proc (unused=0x0) at um_arch.c:71
|
||
#6 0x100a383f in signal_tramp (arg=0x100a3dd8) at trap_user.c:50
|
||
|
||
|
||
|
||
|
||
If this is the case, then some other process is at fault, and went to
|
||
sleep when it shouldn't have. Run ps on the host and figure out which
|
||
process should not have gone to sleep and stayed asleep. Then attach
|
||
to it with gdb and get a backtrace as described in case 3.
|
||
|
||
|
||
|
||
|
||
|
||
|
||
1155.. TThhaannkkss
|
||
|
||
|
||
A number of people have helped this project in various ways, and this
|
||
page gives recognition where recognition is due.
|
||
|
||
|
||
If you're listed here and you would prefer a real link on your name,
|
||
or no link at all, instead of the despammed email address pseudo-link,
|
||
let me know.
|
||
|
||
|
||
If you're not listed here and you think maybe you should be, please
|
||
let me know that as well. I try to get everyone, but sometimes my
|
||
bookkeeping lapses and I forget about contributions.
|
||
|
||
|
||
1155..11.. CCooddee aanndd DDooccuummeennttaattiioonn
|
||
|
||
Rusty Russell <rusty at linuxcare.com.au> -
|
||
|
||
+o wrote the HOWTO <http://user-mode-
|
||
linux.sourceforge.net/UserModeLinux-HOWTO.html>
|
||
|
||
+o prodded me into making this project official and putting it on
|
||
SourceForge
|
||
|
||
+o came up with the way cool UML logo <http://user-mode-
|
||
linux.sourceforge.net/uml-small.png>
|
||
|
||
+o redid the config process
|
||
|
||
|
||
Peter Moulder <reiter at netspace.net.au> - Fixed my config and build
|
||
processes, and added some useful code to the block driver
|
||
|
||
|
||
Bill Stearns <wstearns at pobox.com> -
|
||
|
||
+o HOWTO updates
|
||
|
||
+o lots of bug reports
|
||
|
||
+o lots of testing
|
||
|
||
+o dedicated a box (uml.ists.dartmouth.edu) to support UML development
|
||
|
||
+o wrote the mkrootfs script, which allows bootable filesystems of
|
||
RPM-based distributions to be cranked out
|
||
|
||
+o cranked out a large number of filesystems with said script
|
||
|
||
|
||
Jim Leu <jleu at mindspring.com> - Wrote the virtual ethernet driver
|
||
and associated usermode tools
|
||
|
||
Lars Brinkhoff <http://lars.nocrew.org/> - Contributed the ptrace
|
||
proxy from his own project <http://a386.nocrew.org/> to allow easier
|
||
kernel debugging
|
||
|
||
|
||
Andrea Arcangeli <andrea at suse.de> - Redid some of the early boot
|
||
code so that it would work on machines with Large File Support
|
||
|
||
|
||
Chris Emerson <http://www.chiark.greenend.org.uk/~cemerson/> - Did
|
||
the first UML port to Linux/ppc
|
||
|
||
|
||
Harald Welte <laforge at gnumonks.org> - Wrote the multicast
|
||
transport for the network driver
|
||
|
||
|
||
Jorgen Cederlof - Added special file support to hostfs
|
||
|
||
|
||
Greg Lonnon <glonnon at ridgerun dot com> - Changed the ubd driver
|
||
to allow it to layer a COW file on a shared read-only filesystem and
|
||
wrote the iomem emulation support
|
||
|
||
|
||
Henrik Nordstrom <http://hem.passagen.se/hno/> - Provided a variety
|
||
of patches, fixes, and clues
|
||
|
||
|
||
Lennert Buytenhek - Contributed various patches, a rewrite of the
|
||
network driver, the first implementation of the mconsole driver, and
|
||
did the bulk of the work needed to get SMP working again.
|
||
|
||
|
||
Yon Uriarte - Fixed the TUN/TAP network backend while I slept.
|
||
|
||
|
||
Adam Heath - Made a bunch of nice cleanups to the initialization code,
|
||
plus various other small patches.
|
||
|
||
|
||
Matt Zimmerman - Matt volunteered to be the UML Debian maintainer and
|
||
is doing a real nice job of it. He also noticed and fixed a number of
|
||
actually and potentially exploitable security holes in uml_net. Plus
|
||
the occasional patch. I like patches.
|
||
|
||
|
||
James McMechan - James seems to have taken over maintenance of the ubd
|
||
driver and is doing a nice job of it.
|
||
|
||
|
||
Chandan Kudige - wrote the umlgdb script which automates the reloading
|
||
of module symbols.
|
||
|
||
|
||
Steve Schmidtke - wrote the UML slirp transport and hostaudio drivers,
|
||
enabling UML processes to access audio devices on the host. He also
|
||
submitted patches for the slip transport and lots of other things.
|
||
|
||
|
||
David Coulson <http://davidcoulson.net> -
|
||
|
||
+o Set up the usermodelinux.org <http://usermodelinux.org> site,
|
||
which is a great way of keeping the UML user community on top of
|
||
UML goings-on.
|
||
|
||
+o Site documentation and updates
|
||
|
||
+o Nifty little UML management daemon UMLd
|
||
<http://uml.openconsultancy.com/umld/>
|
||
|
||
+o Lots of testing and bug reports
|
||
|
||
|
||
|
||
|
||
1155..22.. FFlluusshhiinngg oouutt bbuuggss
|
||
|
||
|
||
|
||
+o Yuri Pudgorodsky
|
||
|
||
+o Gerald Britton
|
||
|
||
+o Ian Wehrman
|
||
|
||
+o Gord Lamb
|
||
|
||
+o Eugene Koontz
|
||
|
||
+o John H. Hartman
|
||
|
||
+o Anders Karlsson
|
||
|
||
+o Daniel Phillips
|
||
|
||
+o John Fremlin
|
||
|
||
+o Rainer Burgstaller
|
||
|
||
+o James Stevenson
|
||
|
||
+o Matt Clay
|
||
|
||
+o Cliff Jefferies
|
||
|
||
+o Geoff Hoff
|
||
|
||
+o Lennert Buytenhek
|
||
|
||
+o Al Viro
|
||
|
||
+o Frank Klingenhoefer
|
||
|
||
+o Livio Baldini Soares
|
||
|
||
+o Jon Burgess
|
||
|
||
+o Petru Paler
|
||
|
||
+o Paul
|
||
|
||
+o Chris Reahard
|
||
|
||
+o Sverker Nilsson
|
||
|
||
+o Gong Su
|
||
|
||
+o johan verrept
|
||
|
||
+o Bjorn Eriksson
|
||
|
||
+o Lorenzo Allegrucci
|
||
|
||
+o Muli Ben-Yehuda
|
||
|
||
+o David Mansfield
|
||
|
||
+o Howard Goff
|
||
|
||
+o Mike Anderson
|
||
|
||
+o John Byrne
|
||
|
||
+o Sapan J. Batia
|
||
|
||
+o Iris Huang
|
||
|
||
+o Jan Hudec
|
||
|
||
+o Voluspa
|
||
|
||
|
||
|
||
|
||
1155..33.. BBuugglleettss aanndd cclleeaann--uuppss
|
||
|
||
|
||
|
||
+o Dave Zarzycki
|
||
|
||
+o Adam Lazur
|
||
|
||
+o Boria Feigin
|
||
|
||
+o Brian J. Murrell
|
||
|
||
+o JS
|
||
|
||
+o Roman Zippel
|
||
|
||
+o Wil Cooley
|
||
|
||
+o Ayelet Shemesh
|
||
|
||
+o Will Dyson
|
||
|
||
+o Sverker Nilsson
|
||
|
||
+o dvorak
|
||
|
||
+o v.naga srinivas
|
||
|
||
+o Shlomi Fish
|
||
|
||
+o Roger Binns
|
||
|
||
+o johan verrept
|
||
|
||
+o MrChuoi
|
||
|
||
+o Peter Cleve
|
||
|
||
+o Vincent Guffens
|
||
|
||
+o Nathan Scott
|
||
|
||
+o Patrick Caulfield
|
||
|
||
+o jbearce
|
||
|
||
+o Catalin Marinas
|
||
|
||
+o Shane Spencer
|
||
|
||
+o Zou Min
|
||
|
||
|
||
+o Ryan Boder
|
||
|
||
+o Lorenzo Colitti
|
||
|
||
+o Gwendal Grignou
|
||
|
||
+o Andre' Breiler
|
||
|
||
+o Tsutomu Yasuda
|
||
|
||
|
||
|
||
1155..44.. CCaassee SSttuuddiieess
|
||
|
||
|
||
+o Jon Wright
|
||
|
||
+o William McEwan
|
||
|
||
+o Michael Richardson
|
||
|
||
|
||
|
||
1155..55.. OOtthheerr ccoonnttrriibbuuttiioonnss
|
||
|
||
|
||
Bill Carr <Bill.Carr at compaq.com> made the Red Hat mkrootfs script
|
||
work with RH 6.2.
|
||
|
||
Michael Jennings <mikejen at hevanet.com> sent in some material which
|
||
is now gracing the top of the index page <http://user-mode-
|
||
linux.sourceforge.net/index.html> of this site.
|
||
|
||
SGI <http://www.sgi.com> (and more specifically Ralf Baechle <ralf at
|
||
uni-koblenz.de> ) gave me an account on oss.sgi.com
|
||
<http://www.oss.sgi.com> . The bandwidth there made it possible to
|
||
produce most of the filesystems available on the project download
|
||
page.
|
||
|
||
Laurent Bonnaud <Laurent.Bonnaud at inpg.fr> took the old grotty
|
||
Debian filesystem that I've been distributing and updated it to 2.2.
|
||
It is now available by itself here.
|
||
|
||
Rik van Riel gave me some ftp space on ftp.nl.linux.org so I can make
|
||
releases even when Sourceforge is broken.
|
||
|
||
Rodrigo de Castro looked at my broken pte code and told me what was
|
||
wrong with it, letting me fix a long-standing (several weeks) and
|
||
serious set of bugs.
|
||
|
||
Chris Reahard built a specialized root filesystem for running a DNS
|
||
server jailed inside UML. It's available from the download
|
||
<http://user-mode-linux.sourceforge.net/dl-sf.html> page in the Jail
|
||
Filesysems section.
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|