mirror of
https://github.com/torvalds/linux.git
synced 2024-12-30 14:52:05 +00:00
4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
87 lines
2.7 KiB
Plaintext
87 lines
2.7 KiB
Plaintext
* STMicroelectronics Flexible Direct Memory Access Device Tree bindings
|
|
|
|
The FDMA is a general-purpose direct memory access controller capable of
|
|
supporting 16 independent DMA channels. It accepts up to 32 DMA requests.
|
|
The FDMA is based on a Slim processor which requires a firmware.
|
|
|
|
* FDMA Controller
|
|
|
|
Required properties:
|
|
- compatible : Should be one of
|
|
- st,stih407-fdma-mpe31-11, "st,slim-rproc";
|
|
- st,stih407-fdma-mpe31-12, "st,slim-rproc";
|
|
- st,stih407-fdma-mpe31-13, "st,slim-rproc";
|
|
- reg : Should contain an entry for each name in reg-names
|
|
- reg-names : Must contain "slimcore", "dmem", "peripherals", "imem" entries
|
|
- interrupts : Should contain one interrupt shared by all channels
|
|
- dma-channels : Number of channels supported by the controller
|
|
- #dma-cells : Must be <3>. See DMA client section below
|
|
- clocks : Must contain an entry for each clock
|
|
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
|
|
Example:
|
|
|
|
fdma0: dma-controller@8e20000 {
|
|
compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
|
|
reg = <0x8e20000 0x8000>,
|
|
<0x8e30000 0x3000>,
|
|
<0x8e37000 0x1000>,
|
|
<0x8e38000 0x8000>;
|
|
reg-names = "slimcore", "dmem", "peripherals", "imem";
|
|
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
|
|
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
|
|
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
|
|
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
|
|
dma-channels = <16>;
|
|
#dma-cells = <3>;
|
|
};
|
|
|
|
* DMA client
|
|
|
|
Required properties:
|
|
- dmas: Comma separated list of dma channel requests
|
|
- dma-names: Names of the aforementioned requested channels
|
|
|
|
Each dmas request consists of 4 cells:
|
|
1. A phandle pointing to the FDMA controller
|
|
2. The request line number
|
|
3. A 32bit mask specifying (see include/linux/platform_data/dma-st-fdma.h)
|
|
-bit 2-0: Holdoff value, dreq will be masked for
|
|
0x0: 0-0.5us
|
|
0x1: 0.5-1us
|
|
0x2: 1-1.5us
|
|
-bit 17: data swap
|
|
0x0: disabled
|
|
0x1: enabled
|
|
-bit 21: Increment Address
|
|
0x0: no address increment between transfers
|
|
0x1: increment address between transfers
|
|
-bit 22: 2 STBus Initiator Coprocessor interface
|
|
0x0: high priority port
|
|
0x1: low priority port
|
|
4. transfers type
|
|
0 free running
|
|
1 paced
|
|
|
|
Example:
|
|
|
|
sti_uni_player2: sti-uni-player@2 {
|
|
compatible = "st,sti-uni-player";
|
|
#sound-dai-cells = <0>;
|
|
st,syscfg = <&syscfg_core>;
|
|
clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
|
|
assigned-clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
|
|
assigned-clock-parents = <&clk_s_d0_quadfs 2>;
|
|
assigned-clock-rates = <50000000>;
|
|
reg = <0x8D82000 0x158>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
|
|
dmas = <&fdma0 4 0 1>;
|
|
dai-name = "Uni Player #1 (DAC)";
|
|
dma-names = "tx";
|
|
st,uniperiph-id = <2>;
|
|
st,version = <5>;
|
|
st,mode = "PCM";
|
|
};
|