linux/net/tipc/msg.c
Jon Paul Maloy 8db1bae30b tipc: separate building and sending of rejected messages
The way we build and send rejected message is currenty perceived as
hard to follow, partly because we let the transmission go via deep
call chains through functions such as tipc_reject_msg() and
net_route_msg().

We want to remove those functions, and make the call sequences shallower
and simpler. For this purpose, we separate building and sending of
rejected messages. We build the reject message using the new function
tipc_msg_reverse(), and let the transmission go via the newly introduced
tipc_link_xmit2() function, as all transmission eventually will do. We
also ensure that all calls to tipc_link_xmit2() are made outside
port_lock/bh_lock_sock.

Finally, we replace all calls to tipc_reject_msg() with the two new
calls at all locations in the code that we want to keep. The remaining
calls are made from code that we are planning to remove, along with
tipc_reject_msg() itself.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-27 12:50:55 -07:00

373 lines
10 KiB
C

/*
* net/tipc/msg.c: TIPC message header routines
*
* Copyright (c) 2000-2006, 2014, Ericsson AB
* Copyright (c) 2005, 2010-2011, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include "core.h"
#include "msg.h"
#define MAX_FORWARD_SIZE 1024
static unsigned int align(unsigned int i)
{
return (i + 3) & ~3u;
}
void tipc_msg_init(struct tipc_msg *m, u32 user, u32 type, u32 hsize,
u32 destnode)
{
memset(m, 0, hsize);
msg_set_version(m);
msg_set_user(m, user);
msg_set_hdr_sz(m, hsize);
msg_set_size(m, hsize);
msg_set_prevnode(m, tipc_own_addr);
msg_set_type(m, type);
msg_set_orignode(m, tipc_own_addr);
msg_set_destnode(m, destnode);
}
/**
* tipc_msg_build - create message using specified header and data
*
* Note: Caller must not hold any locks in case copy_from_user() is interrupted!
*
* Returns message data size or errno
*/
int tipc_msg_build(struct tipc_msg *hdr, struct iovec const *msg_sect,
unsigned int len, int max_size, struct sk_buff **buf)
{
int dsz, sz, hsz;
unsigned char *to;
dsz = len;
hsz = msg_hdr_sz(hdr);
sz = hsz + dsz;
msg_set_size(hdr, sz);
if (unlikely(sz > max_size)) {
*buf = NULL;
return dsz;
}
*buf = tipc_buf_acquire(sz);
if (!(*buf))
return -ENOMEM;
skb_copy_to_linear_data(*buf, hdr, hsz);
to = (*buf)->data + hsz;
if (len && memcpy_fromiovecend(to, msg_sect, 0, dsz)) {
kfree_skb(*buf);
*buf = NULL;
return -EFAULT;
}
return dsz;
}
/* tipc_buf_append(): Append a buffer to the fragment list of another buffer
* Let first buffer become head buffer
* Returns 1 and sets *buf to headbuf if chain is complete, otherwise 0
* Leaves headbuf pointer at NULL if failure
*/
int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf)
{
struct sk_buff *head = *headbuf;
struct sk_buff *frag = *buf;
struct sk_buff *tail;
struct tipc_msg *msg = buf_msg(frag);
u32 fragid = msg_type(msg);
bool headstolen;
int delta;
skb_pull(frag, msg_hdr_sz(msg));
if (fragid == FIRST_FRAGMENT) {
if (head || skb_unclone(frag, GFP_ATOMIC))
goto out_free;
head = *headbuf = frag;
skb_frag_list_init(head);
return 0;
}
if (!head)
goto out_free;
tail = TIPC_SKB_CB(head)->tail;
if (skb_try_coalesce(head, frag, &headstolen, &delta)) {
kfree_skb_partial(frag, headstolen);
} else {
if (!skb_has_frag_list(head))
skb_shinfo(head)->frag_list = frag;
else
tail->next = frag;
head->truesize += frag->truesize;
head->data_len += frag->len;
head->len += frag->len;
TIPC_SKB_CB(head)->tail = frag;
}
if (fragid == LAST_FRAGMENT) {
*buf = head;
TIPC_SKB_CB(head)->tail = NULL;
*headbuf = NULL;
return 1;
}
*buf = NULL;
return 0;
out_free:
pr_warn_ratelimited("Unable to build fragment list\n");
kfree_skb(*buf);
return 0;
}
/**
* tipc_msg_build2 - create buffer chain containing specified header and data
* @mhdr: Message header, to be prepended to data
* @iov: User data
* @offset: Posision in iov to start copying from
* @dsz: Total length of user data
* @pktmax: Max packet size that can be used
* @chain: Buffer or chain of buffers to be returned to caller
* Returns message data size or errno: -ENOMEM, -EFAULT
*/
int tipc_msg_build2(struct tipc_msg *mhdr, struct iovec const *iov,
int offset, int dsz, int pktmax , struct sk_buff **chain)
{
int mhsz = msg_hdr_sz(mhdr);
int msz = mhsz + dsz;
int pktno = 1;
int pktsz;
int pktrem = pktmax;
int drem = dsz;
struct tipc_msg pkthdr;
struct sk_buff *buf, *prev;
char *pktpos;
int rc;
msg_set_size(mhdr, msz);
/* No fragmentation needed? */
if (likely(msz <= pktmax)) {
buf = tipc_buf_acquire(msz);
*chain = buf;
if (unlikely(!buf))
return -ENOMEM;
skb_copy_to_linear_data(buf, mhdr, mhsz);
pktpos = buf->data + mhsz;
if (!dsz || !memcpy_fromiovecend(pktpos, iov, offset, dsz))
return dsz;
rc = -EFAULT;
goto error;
}
/* Prepare reusable fragment header */
tipc_msg_init(&pkthdr, MSG_FRAGMENTER, FIRST_FRAGMENT,
INT_H_SIZE, msg_destnode(mhdr));
msg_set_size(&pkthdr, pktmax);
msg_set_fragm_no(&pkthdr, pktno);
/* Prepare first fragment */
*chain = buf = tipc_buf_acquire(pktmax);
if (!buf)
return -ENOMEM;
pktpos = buf->data;
skb_copy_to_linear_data(buf, &pkthdr, INT_H_SIZE);
pktpos += INT_H_SIZE;
pktrem -= INT_H_SIZE;
skb_copy_to_linear_data_offset(buf, INT_H_SIZE, mhdr, mhsz);
pktpos += mhsz;
pktrem -= mhsz;
do {
if (drem < pktrem)
pktrem = drem;
if (memcpy_fromiovecend(pktpos, iov, offset, pktrem)) {
rc = -EFAULT;
goto error;
}
drem -= pktrem;
offset += pktrem;
if (!drem)
break;
/* Prepare new fragment: */
if (drem < (pktmax - INT_H_SIZE))
pktsz = drem + INT_H_SIZE;
else
pktsz = pktmax;
prev = buf;
buf = tipc_buf_acquire(pktsz);
if (!buf) {
rc = -ENOMEM;
goto error;
}
prev->next = buf;
msg_set_type(&pkthdr, FRAGMENT);
msg_set_size(&pkthdr, pktsz);
msg_set_fragm_no(&pkthdr, ++pktno);
skb_copy_to_linear_data(buf, &pkthdr, INT_H_SIZE);
pktpos = buf->data + INT_H_SIZE;
pktrem = pktsz - INT_H_SIZE;
} while (1);
msg_set_type(buf_msg(buf), LAST_FRAGMENT);
return dsz;
error:
kfree_skb_list(*chain);
*chain = NULL;
return rc;
}
/**
* tipc_msg_bundle(): Append contents of a buffer to tail of an existing one
* @bbuf: the existing buffer ("bundle")
* @buf: buffer to be appended
* @mtu: max allowable size for the bundle buffer
* Consumes buffer if successful
* Returns true if bundling could be performed, otherwise false
*/
bool tipc_msg_bundle(struct sk_buff *bbuf, struct sk_buff *buf, u32 mtu)
{
struct tipc_msg *bmsg = buf_msg(bbuf);
struct tipc_msg *msg = buf_msg(buf);
unsigned int bsz = msg_size(bmsg);
unsigned int msz = msg_size(msg);
u32 start = align(bsz);
u32 max = mtu - INT_H_SIZE;
u32 pad = start - bsz;
if (likely(msg_user(msg) == MSG_FRAGMENTER))
return false;
if (unlikely(msg_user(msg) == CHANGEOVER_PROTOCOL))
return false;
if (unlikely(msg_user(msg) == BCAST_PROTOCOL))
return false;
if (likely(msg_user(bmsg) != MSG_BUNDLER))
return false;
if (likely(msg_type(bmsg) != BUNDLE_OPEN))
return false;
if (unlikely(skb_tailroom(bbuf) < (pad + msz)))
return false;
if (unlikely(max < (start + msz)))
return false;
skb_put(bbuf, pad + msz);
skb_copy_to_linear_data_offset(bbuf, start, buf->data, msz);
msg_set_size(bmsg, start + msz);
msg_set_msgcnt(bmsg, msg_msgcnt(bmsg) + 1);
bbuf->next = buf->next;
kfree_skb(buf);
return true;
}
/**
* tipc_msg_make_bundle(): Create bundle buf and append message to its tail
* @buf: buffer to be appended and replaced
* @mtu: max allowable size for the bundle buffer, inclusive header
* @dnode: destination node for message. (Not always present in header)
* Replaces buffer if successful
* Returns true if sucess, otherwise false
*/
bool tipc_msg_make_bundle(struct sk_buff **buf, u32 mtu, u32 dnode)
{
struct sk_buff *bbuf;
struct tipc_msg *bmsg;
struct tipc_msg *msg = buf_msg(*buf);
u32 msz = msg_size(msg);
u32 max = mtu - INT_H_SIZE;
if (msg_user(msg) == MSG_FRAGMENTER)
return false;
if (msg_user(msg) == CHANGEOVER_PROTOCOL)
return false;
if (msg_user(msg) == BCAST_PROTOCOL)
return false;
if (msz > (max / 2))
return false;
bbuf = tipc_buf_acquire(max);
if (!bbuf)
return false;
skb_trim(bbuf, INT_H_SIZE);
bmsg = buf_msg(bbuf);
tipc_msg_init(bmsg, MSG_BUNDLER, BUNDLE_OPEN, INT_H_SIZE, dnode);
msg_set_seqno(bmsg, msg_seqno(msg));
msg_set_ack(bmsg, msg_ack(msg));
msg_set_bcast_ack(bmsg, msg_bcast_ack(msg));
bbuf->next = (*buf)->next;
tipc_msg_bundle(bbuf, *buf, mtu);
*buf = bbuf;
return true;
}
/**
* tipc_msg_reverse(): swap source and destination addresses and add error code
* @buf: buffer containing message to be reversed
* @dnode: return value: node where to send message after reversal
* @err: error code to be set in message
* Consumes buffer if failure
* Returns true if success, otherwise false
*/
bool tipc_msg_reverse(struct sk_buff *buf, u32 *dnode, int err)
{
struct tipc_msg *msg = buf_msg(buf);
uint imp = msg_importance(msg);
struct tipc_msg ohdr;
uint rdsz = min_t(uint, msg_data_sz(msg), MAX_FORWARD_SIZE);
if (skb_linearize(buf) || !msg_isdata(msg))
goto exit;
if (msg_dest_droppable(msg) || msg_errcode(msg))
goto exit;
memcpy(&ohdr, msg, msg_hdr_sz(msg));
msg_set_importance(msg, min_t(uint, ++imp, TIPC_CRITICAL_IMPORTANCE));
msg_set_errcode(msg, err);
msg_set_origport(msg, msg_destport(&ohdr));
msg_set_destport(msg, msg_origport(&ohdr));
msg_set_prevnode(msg, tipc_own_addr);
if (!msg_short(msg)) {
msg_set_orignode(msg, msg_destnode(&ohdr));
msg_set_destnode(msg, msg_orignode(&ohdr));
}
msg_set_size(msg, msg_hdr_sz(msg) + rdsz);
skb_trim(buf, msg_size(msg));
skb_orphan(buf);
*dnode = msg_orignode(&ohdr);
return true;
exit:
kfree_skb(buf);
return false;
}