mirror of
https://github.com/torvalds/linux.git
synced 2024-11-29 23:51:37 +00:00
538c08f4c8
The WDIOC_SETOPTIONS case in the watchdog ioctl would alwayss falls
through to the -EINVAL case. This is wrong since thew watchdog does
actually get stopped or started correctly.
Fixes: 920f91e50c
("drivers/rtc/rtc-ds1374.c: add watchdog support")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
726 lines
17 KiB
C
726 lines
17 KiB
C
/*
|
|
* RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C
|
|
*
|
|
* Based on code by Randy Vinson <rvinson@mvista.com>,
|
|
* which was based on the m41t00.c by Mark Greer <mgreer@mvista.com>.
|
|
*
|
|
* Copyright (C) 2014 Rose Technology
|
|
* Copyright (C) 2006-2007 Freescale Semiconductor
|
|
*
|
|
* 2005 (c) MontaVista Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
/*
|
|
* It would be more efficient to use i2c msgs/i2c_transfer directly but, as
|
|
* recommened in .../Documentation/i2c/writing-clients section
|
|
* "Sending and receiving", using SMBus level communication is preferred.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pm.h>
|
|
#ifdef CONFIG_RTC_DRV_DS1374_WDT
|
|
#include <linux/fs.h>
|
|
#include <linux/ioctl.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/watchdog.h>
|
|
#endif
|
|
|
|
#define DS1374_REG_TOD0 0x00 /* Time of Day */
|
|
#define DS1374_REG_TOD1 0x01
|
|
#define DS1374_REG_TOD2 0x02
|
|
#define DS1374_REG_TOD3 0x03
|
|
#define DS1374_REG_WDALM0 0x04 /* Watchdog/Alarm */
|
|
#define DS1374_REG_WDALM1 0x05
|
|
#define DS1374_REG_WDALM2 0x06
|
|
#define DS1374_REG_CR 0x07 /* Control */
|
|
#define DS1374_REG_CR_AIE 0x01 /* Alarm Int. Enable */
|
|
#define DS1374_REG_CR_WDALM 0x20 /* 1=Watchdog, 0=Alarm */
|
|
#define DS1374_REG_CR_WACE 0x40 /* WD/Alarm counter enable */
|
|
#define DS1374_REG_SR 0x08 /* Status */
|
|
#define DS1374_REG_SR_OSF 0x80 /* Oscillator Stop Flag */
|
|
#define DS1374_REG_SR_AF 0x01 /* Alarm Flag */
|
|
#define DS1374_REG_TCR 0x09 /* Trickle Charge */
|
|
|
|
static const struct i2c_device_id ds1374_id[] = {
|
|
{ "ds1374", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ds1374_id);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id ds1374_of_match[] = {
|
|
{ .compatible = "dallas,ds1374" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ds1374_of_match);
|
|
#endif
|
|
|
|
struct ds1374 {
|
|
struct i2c_client *client;
|
|
struct rtc_device *rtc;
|
|
struct work_struct work;
|
|
|
|
/* The mutex protects alarm operations, and prevents a race
|
|
* between the enable_irq() in the workqueue and the free_irq()
|
|
* in the remove function.
|
|
*/
|
|
struct mutex mutex;
|
|
int exiting;
|
|
};
|
|
|
|
static struct i2c_driver ds1374_driver;
|
|
|
|
static int ds1374_read_rtc(struct i2c_client *client, u32 *time,
|
|
int reg, int nbytes)
|
|
{
|
|
u8 buf[4];
|
|
int ret;
|
|
int i;
|
|
|
|
if (WARN_ON(nbytes > 4))
|
|
return -EINVAL;
|
|
|
|
ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret < nbytes)
|
|
return -EIO;
|
|
|
|
for (i = nbytes - 1, *time = 0; i >= 0; i--)
|
|
*time = (*time << 8) | buf[i];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds1374_write_rtc(struct i2c_client *client, u32 time,
|
|
int reg, int nbytes)
|
|
{
|
|
u8 buf[4];
|
|
int i;
|
|
|
|
if (nbytes > 4) {
|
|
WARN_ON(1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < nbytes; i++) {
|
|
buf[i] = time & 0xff;
|
|
time >>= 8;
|
|
}
|
|
|
|
return i2c_smbus_write_i2c_block_data(client, reg, nbytes, buf);
|
|
}
|
|
|
|
static int ds1374_check_rtc_status(struct i2c_client *client)
|
|
{
|
|
int ret = 0;
|
|
int control, stat;
|
|
|
|
stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
|
|
if (stat < 0)
|
|
return stat;
|
|
|
|
if (stat & DS1374_REG_SR_OSF)
|
|
dev_warn(&client->dev,
|
|
"oscillator discontinuity flagged, time unreliable\n");
|
|
|
|
stat &= ~(DS1374_REG_SR_OSF | DS1374_REG_SR_AF);
|
|
|
|
ret = i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* If the alarm is pending, clear it before requesting
|
|
* the interrupt, so an interrupt event isn't reported
|
|
* before everything is initialized.
|
|
*/
|
|
|
|
control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
|
if (control < 0)
|
|
return control;
|
|
|
|
control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
|
|
return i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
|
|
}
|
|
|
|
static int ds1374_read_time(struct device *dev, struct rtc_time *time)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
u32 itime;
|
|
int ret;
|
|
|
|
ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4);
|
|
if (!ret)
|
|
rtc_time_to_tm(itime, time);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ds1374_set_time(struct device *dev, struct rtc_time *time)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
unsigned long itime;
|
|
|
|
rtc_tm_to_time(time, &itime);
|
|
return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4);
|
|
}
|
|
|
|
#ifndef CONFIG_RTC_DRV_DS1374_WDT
|
|
/* The ds1374 has a decrementer for an alarm, rather than a comparator.
|
|
* If the time of day is changed, then the alarm will need to be
|
|
* reset.
|
|
*/
|
|
static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ds1374 *ds1374 = i2c_get_clientdata(client);
|
|
u32 now, cur_alarm;
|
|
int cr, sr;
|
|
int ret = 0;
|
|
|
|
if (client->irq <= 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&ds1374->mutex);
|
|
|
|
cr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
sr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = ds1374_read_rtc(client, &now, DS1374_REG_TOD0, 4);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = ds1374_read_rtc(client, &cur_alarm, DS1374_REG_WDALM0, 3);
|
|
if (ret)
|
|
goto out;
|
|
|
|
rtc_time_to_tm(now + cur_alarm, &alarm->time);
|
|
alarm->enabled = !!(cr & DS1374_REG_CR_WACE);
|
|
alarm->pending = !!(sr & DS1374_REG_SR_AF);
|
|
|
|
out:
|
|
mutex_unlock(&ds1374->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ds1374 *ds1374 = i2c_get_clientdata(client);
|
|
struct rtc_time now;
|
|
unsigned long new_alarm, itime;
|
|
int cr;
|
|
int ret = 0;
|
|
|
|
if (client->irq <= 0)
|
|
return -EINVAL;
|
|
|
|
ret = ds1374_read_time(dev, &now);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
rtc_tm_to_time(&alarm->time, &new_alarm);
|
|
rtc_tm_to_time(&now, &itime);
|
|
|
|
/* This can happen due to races, in addition to dates that are
|
|
* truly in the past. To avoid requiring the caller to check for
|
|
* races, dates in the past are assumed to be in the recent past
|
|
* (i.e. not something that we'd rather the caller know about via
|
|
* an error), and the alarm is set to go off as soon as possible.
|
|
*/
|
|
if (time_before_eq(new_alarm, itime))
|
|
new_alarm = 1;
|
|
else
|
|
new_alarm -= itime;
|
|
|
|
mutex_lock(&ds1374->mutex);
|
|
|
|
ret = cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* Disable any existing alarm before setting the new one
|
|
* (or lack thereof). */
|
|
cr &= ~DS1374_REG_CR_WACE;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = ds1374_write_rtc(client, new_alarm, DS1374_REG_WDALM0, 3);
|
|
if (ret)
|
|
goto out;
|
|
|
|
if (alarm->enabled) {
|
|
cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
|
|
cr &= ~DS1374_REG_CR_WDALM;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&ds1374->mutex);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static irqreturn_t ds1374_irq(int irq, void *dev_id)
|
|
{
|
|
struct i2c_client *client = dev_id;
|
|
struct ds1374 *ds1374 = i2c_get_clientdata(client);
|
|
|
|
disable_irq_nosync(irq);
|
|
schedule_work(&ds1374->work);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void ds1374_work(struct work_struct *work)
|
|
{
|
|
struct ds1374 *ds1374 = container_of(work, struct ds1374, work);
|
|
struct i2c_client *client = ds1374->client;
|
|
int stat, control;
|
|
|
|
mutex_lock(&ds1374->mutex);
|
|
|
|
stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
|
|
if (stat < 0)
|
|
goto unlock;
|
|
|
|
if (stat & DS1374_REG_SR_AF) {
|
|
stat &= ~DS1374_REG_SR_AF;
|
|
i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
|
|
|
|
control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
|
if (control < 0)
|
|
goto out;
|
|
|
|
control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
|
|
i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
|
|
|
|
rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF);
|
|
}
|
|
|
|
out:
|
|
if (!ds1374->exiting)
|
|
enable_irq(client->irq);
|
|
unlock:
|
|
mutex_unlock(&ds1374->mutex);
|
|
}
|
|
|
|
#ifndef CONFIG_RTC_DRV_DS1374_WDT
|
|
static int ds1374_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ds1374 *ds1374 = i2c_get_clientdata(client);
|
|
int ret;
|
|
|
|
mutex_lock(&ds1374->mutex);
|
|
|
|
ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (enabled) {
|
|
ret |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
|
|
ret &= ~DS1374_REG_CR_WDALM;
|
|
} else {
|
|
ret &= ~DS1374_REG_CR_WACE;
|
|
}
|
|
ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret);
|
|
|
|
out:
|
|
mutex_unlock(&ds1374->mutex);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static const struct rtc_class_ops ds1374_rtc_ops = {
|
|
.read_time = ds1374_read_time,
|
|
.set_time = ds1374_set_time,
|
|
#ifndef CONFIG_RTC_DRV_DS1374_WDT
|
|
.read_alarm = ds1374_read_alarm,
|
|
.set_alarm = ds1374_set_alarm,
|
|
.alarm_irq_enable = ds1374_alarm_irq_enable,
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_RTC_DRV_DS1374_WDT
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* Watchdog Driver
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static struct i2c_client *save_client;
|
|
/* Default margin */
|
|
#define WD_TIMO 131762
|
|
|
|
#define DRV_NAME "DS1374 Watchdog"
|
|
|
|
static int wdt_margin = WD_TIMO;
|
|
static unsigned long wdt_is_open;
|
|
module_param(wdt_margin, int, 0);
|
|
MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 32s)");
|
|
|
|
static const struct watchdog_info ds1374_wdt_info = {
|
|
.identity = "DS1374 WTD",
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
|
|
WDIOF_MAGICCLOSE,
|
|
};
|
|
|
|
static int ds1374_wdt_settimeout(unsigned int timeout)
|
|
{
|
|
int ret = -ENOIOCTLCMD;
|
|
int cr;
|
|
|
|
ret = cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* Disable any existing watchdog/alarm before setting the new one */
|
|
cr &= ~DS1374_REG_CR_WACE;
|
|
|
|
ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* Set new watchdog time */
|
|
ret = ds1374_write_rtc(save_client, timeout, DS1374_REG_WDALM0, 3);
|
|
if (ret) {
|
|
pr_info("couldn't set new watchdog time\n");
|
|
goto out;
|
|
}
|
|
|
|
/* Enable watchdog timer */
|
|
cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_WDALM;
|
|
cr &= ~DS1374_REG_CR_AIE;
|
|
|
|
ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return 0;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
|
|
/*
|
|
* Reload the watchdog timer. (ie, pat the watchdog)
|
|
*/
|
|
static void ds1374_wdt_ping(void)
|
|
{
|
|
u32 val;
|
|
int ret = 0;
|
|
|
|
ret = ds1374_read_rtc(save_client, &val, DS1374_REG_WDALM0, 3);
|
|
if (ret)
|
|
pr_info("WD TICK FAIL!!!!!!!!!! %i\n", ret);
|
|
}
|
|
|
|
static void ds1374_wdt_disable(void)
|
|
{
|
|
int ret = -ENOIOCTLCMD;
|
|
int cr;
|
|
|
|
cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR);
|
|
/* Disable watchdog timer */
|
|
cr &= ~DS1374_REG_CR_WACE;
|
|
|
|
ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
|
|
}
|
|
|
|
/*
|
|
* Watchdog device is opened, and watchdog starts running.
|
|
*/
|
|
static int ds1374_wdt_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct ds1374 *ds1374 = i2c_get_clientdata(save_client);
|
|
|
|
if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) {
|
|
mutex_lock(&ds1374->mutex);
|
|
if (test_and_set_bit(0, &wdt_is_open)) {
|
|
mutex_unlock(&ds1374->mutex);
|
|
return -EBUSY;
|
|
}
|
|
/*
|
|
* Activate
|
|
*/
|
|
wdt_is_open = 1;
|
|
mutex_unlock(&ds1374->mutex);
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Close the watchdog device.
|
|
*/
|
|
static int ds1374_wdt_release(struct inode *inode, struct file *file)
|
|
{
|
|
if (MINOR(inode->i_rdev) == WATCHDOG_MINOR)
|
|
clear_bit(0, &wdt_is_open);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Pat the watchdog whenever device is written to.
|
|
*/
|
|
static ssize_t ds1374_wdt_write(struct file *file, const char __user *data,
|
|
size_t len, loff_t *ppos)
|
|
{
|
|
if (len) {
|
|
ds1374_wdt_ping();
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t ds1374_wdt_read(struct file *file, char __user *data,
|
|
size_t len, loff_t *ppos)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Handle commands from user-space.
|
|
*/
|
|
static long ds1374_wdt_ioctl(struct file *file, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
int new_margin, options;
|
|
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
return copy_to_user((struct watchdog_info __user *)arg,
|
|
&ds1374_wdt_info, sizeof(ds1374_wdt_info)) ? -EFAULT : 0;
|
|
|
|
case WDIOC_GETSTATUS:
|
|
case WDIOC_GETBOOTSTATUS:
|
|
return put_user(0, (int __user *)arg);
|
|
case WDIOC_KEEPALIVE:
|
|
ds1374_wdt_ping();
|
|
return 0;
|
|
case WDIOC_SETTIMEOUT:
|
|
if (get_user(new_margin, (int __user *)arg))
|
|
return -EFAULT;
|
|
|
|
/* the hardware's tick rate is 4096 Hz, so
|
|
* the counter value needs to be scaled accordingly
|
|
*/
|
|
new_margin <<= 12;
|
|
if (new_margin < 1 || new_margin > 16777216)
|
|
return -EINVAL;
|
|
|
|
wdt_margin = new_margin;
|
|
ds1374_wdt_settimeout(new_margin);
|
|
ds1374_wdt_ping();
|
|
/* fallthrough */
|
|
case WDIOC_GETTIMEOUT:
|
|
/* when returning ... inverse is true */
|
|
return put_user((wdt_margin >> 12), (int __user *)arg);
|
|
case WDIOC_SETOPTIONS:
|
|
if (copy_from_user(&options, (int __user *)arg, sizeof(int)))
|
|
return -EFAULT;
|
|
|
|
if (options & WDIOS_DISABLECARD) {
|
|
pr_info("disable watchdog\n");
|
|
ds1374_wdt_disable();
|
|
return 0;
|
|
}
|
|
|
|
if (options & WDIOS_ENABLECARD) {
|
|
pr_info("enable watchdog\n");
|
|
ds1374_wdt_settimeout(wdt_margin);
|
|
ds1374_wdt_ping();
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
return -ENOTTY;
|
|
}
|
|
|
|
static long ds1374_wdt_unlocked_ioctl(struct file *file, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
int ret;
|
|
struct ds1374 *ds1374 = i2c_get_clientdata(save_client);
|
|
|
|
mutex_lock(&ds1374->mutex);
|
|
ret = ds1374_wdt_ioctl(file, cmd, arg);
|
|
mutex_unlock(&ds1374->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ds1374_wdt_notify_sys(struct notifier_block *this,
|
|
unsigned long code, void *unused)
|
|
{
|
|
if (code == SYS_DOWN || code == SYS_HALT)
|
|
/* Disable Watchdog */
|
|
ds1374_wdt_disable();
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static const struct file_operations ds1374_wdt_fops = {
|
|
.owner = THIS_MODULE,
|
|
.read = ds1374_wdt_read,
|
|
.unlocked_ioctl = ds1374_wdt_unlocked_ioctl,
|
|
.write = ds1374_wdt_write,
|
|
.open = ds1374_wdt_open,
|
|
.release = ds1374_wdt_release,
|
|
.llseek = no_llseek,
|
|
};
|
|
|
|
static struct miscdevice ds1374_miscdev = {
|
|
.minor = WATCHDOG_MINOR,
|
|
.name = "watchdog",
|
|
.fops = &ds1374_wdt_fops,
|
|
};
|
|
|
|
static struct notifier_block ds1374_wdt_notifier = {
|
|
.notifier_call = ds1374_wdt_notify_sys,
|
|
};
|
|
|
|
#endif /*CONFIG_RTC_DRV_DS1374_WDT*/
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* Driver Interface
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static int ds1374_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ds1374 *ds1374;
|
|
int ret;
|
|
|
|
ds1374 = devm_kzalloc(&client->dev, sizeof(struct ds1374), GFP_KERNEL);
|
|
if (!ds1374)
|
|
return -ENOMEM;
|
|
|
|
ds1374->client = client;
|
|
i2c_set_clientdata(client, ds1374);
|
|
|
|
INIT_WORK(&ds1374->work, ds1374_work);
|
|
mutex_init(&ds1374->mutex);
|
|
|
|
ret = ds1374_check_rtc_status(client);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (client->irq > 0) {
|
|
ret = devm_request_irq(&client->dev, client->irq, ds1374_irq, 0,
|
|
"ds1374", client);
|
|
if (ret) {
|
|
dev_err(&client->dev, "unable to request IRQ\n");
|
|
return ret;
|
|
}
|
|
|
|
device_set_wakeup_capable(&client->dev, 1);
|
|
}
|
|
|
|
ds1374->rtc = devm_rtc_device_register(&client->dev, client->name,
|
|
&ds1374_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(ds1374->rtc)) {
|
|
dev_err(&client->dev, "unable to register the class device\n");
|
|
return PTR_ERR(ds1374->rtc);
|
|
}
|
|
|
|
#ifdef CONFIG_RTC_DRV_DS1374_WDT
|
|
save_client = client;
|
|
ret = misc_register(&ds1374_miscdev);
|
|
if (ret)
|
|
return ret;
|
|
ret = register_reboot_notifier(&ds1374_wdt_notifier);
|
|
if (ret) {
|
|
misc_deregister(&ds1374_miscdev);
|
|
return ret;
|
|
}
|
|
ds1374_wdt_settimeout(131072);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds1374_remove(struct i2c_client *client)
|
|
{
|
|
struct ds1374 *ds1374 = i2c_get_clientdata(client);
|
|
#ifdef CONFIG_RTC_DRV_DS1374_WDT
|
|
misc_deregister(&ds1374_miscdev);
|
|
ds1374_miscdev.parent = NULL;
|
|
unregister_reboot_notifier(&ds1374_wdt_notifier);
|
|
#endif
|
|
|
|
if (client->irq > 0) {
|
|
mutex_lock(&ds1374->mutex);
|
|
ds1374->exiting = 1;
|
|
mutex_unlock(&ds1374->mutex);
|
|
|
|
devm_free_irq(&client->dev, client->irq, client);
|
|
cancel_work_sync(&ds1374->work);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int ds1374_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
if (client->irq > 0 && device_may_wakeup(&client->dev))
|
|
enable_irq_wake(client->irq);
|
|
return 0;
|
|
}
|
|
|
|
static int ds1374_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
if (client->irq > 0 && device_may_wakeup(&client->dev))
|
|
disable_irq_wake(client->irq);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(ds1374_pm, ds1374_suspend, ds1374_resume);
|
|
|
|
static struct i2c_driver ds1374_driver = {
|
|
.driver = {
|
|
.name = "rtc-ds1374",
|
|
.of_match_table = of_match_ptr(ds1374_of_match),
|
|
.pm = &ds1374_pm,
|
|
},
|
|
.probe = ds1374_probe,
|
|
.remove = ds1374_remove,
|
|
.id_table = ds1374_id,
|
|
};
|
|
|
|
module_i2c_driver(ds1374_driver);
|
|
|
|
MODULE_AUTHOR("Scott Wood <scottwood@freescale.com>");
|
|
MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC Driver");
|
|
MODULE_LICENSE("GPL");
|